YouTube2Text

Wie man einen Recurvebogen baut | SWR Handwerkskunst — Transcript

by SWR Handwerkskunst · 3,988 words · 526 segments · language en · Watch on YouTube

Full transcript

  1. 0:12A piece of wood is refined here.
  2. 0:16With a saw, sandpaper
  3. 0:20and steam.
  4. 0:22An elegant recurve bow is formed
  5. 0:25from an apparently simple cleft .
  6. 0:28The recurve bow is always a bit of the highlight
  7. 0:31among the selfbows.
  8. 0:33In our case we had a flexible recurve,
  9. 0:36it is also called a working recurve,
  10. 0:39where the recurve also basically participates in the movement,
  11. 0:42that is another level more difficult and demanding,
  12. 0:45because with these movements it has to fit perfectly.
  13. 0:50And if the blank is twisted, overgrown, or there is
  14. 0:53a knothole, then that's a big challenge.
  15. 0:57You can't make any mistakes there.
  16. 0:59Horst Perk is at home in Weibern in the Eifel
  17. 1:03and has been making bows in the traditional way for years.
  18. 1:10The master carpenter makes "selfbows",
  19. 1:13bows made from a single piece of wood.
  20. 1:19So, here we are in my lumberyard.
  21. 1:22Bow blanks made of different woods,
  22. 1:26which are well suited for bow making, are stored here.
  23. 1:29Here are yew blanks, robinia
  24. 1:32blanks, Osage Orange blanks, ash blanks and other woods.
  25. 1:37For today's project we need a nice Osage blank
  26. 1:41suitable for a recurve bow.
  27. 1:43And now I'm looking for a nice one.
  28. 1:47A specialty of Horst Perk:
  29. 1:50he prefers to work on blanks with character,
  30. 1:53like knotholes and twists.
  31. 2:04I get some of the wood from my own harvest, so to speak.
  32. 2:07Well, I fell and split a lot of trees myself.
  33. 2:12I like it best when I get fresh wood.
  34. 2:15I then split, halve or quarter it.
  35. 2:18If it's thicker trunks,
  36. 2:20I work out a larger number of clefts.
  37. 2:24Then they are stored for months or years in the wood store.
  38. 2:30Horst Perk chooses Osage Orange, milk orange tree,
  39. 2:33the perfect wood for a so-called recurve bow.
  40. 2:38Yes, today we want to build a recurve bow
  41. 2:41out of Osage Orange, that's the name of the wood.
  42. 2:44It could look something like this later when it's finished.
  43. 2:50This also has, as you can see here,
  44. 2:53a larger knothole, which is later also integrated into the bow.
  45. 2:57Later we will create the arc design and then work that out.
  46. 3:03First, let's reduce the width of the blank a bit.
  47. 3:07And at high altitudes, you can also remove something roughly
  48. 3:10so that it becomes a little more manageable.
  49. 3:12Then we have to completely remove the sapwood,
  50. 3:14the light-colored sapwood.
  51. 3:17The bow always needs a strong proportion of late wood.
  52. 3:21We have it here.
  53. 3:22We still have to remove this material
  54. 3:25before we get to that level.
  55. 3:27The so-called "bower" works out the shape of the arch
  56. 3:31layer by layer.
  57. 3:39With the drawknife, he removes one growth ring after the other
  58. 3:43, always following the course of the wood fiber.
  59. 3:47(He speaks quietly.)
  60. 3:54In this phase, the blank gets its first rough shape.
  61. 3:58Horst Perk gets to know the peculiarities of the wood
  62. 4:02and exposes its structure.
  63. 4:04(Planing noises)
  64. 4:10Hours of work.
  65. 4:13The master carpenter scrapes closer and closer
  66. 4:15to the growth ring that he wants to leave.
  67. 4:42Little by little, the wood reveals its secrets.
  68. 4:54In any case, something always comes to light,
  69. 4:57like the small branch, which was not so clearly visible at the beginning.
  70. 5:01It's becoming more and more apparent now.
  71. 5:04Sometimes there are little surprises,
  72. 5:07but usually they are integrated into the sheet.
  73. 5:11And then it fits again.
  74. 5:14The Bogner carefully follows the annual ring around
  75. 5:18the knothole and the stump.
  76. 5:30This is the next growth ring.
  77. 5:33A tedious and exhausting job.
  78. 5:49So, to check, look at the front from time to time,
  79. 5:52that's what it's called, where we are.
  80. 5:55In any case, we still have to remove five or six more rings in height.
  81. 6:00In that case you have to go deeper.
  82. 6:06Bows have been around for around 20,000 years.
  83. 6:09They have been used for hunting since the Stone Age:
  84. 6:12a truly archaic weapon.
  85. 6:16Basically, the manufacturing process hasn't changed much.
  86. 6:22Now we are almost where we want to be.
  87. 6:27And the last annual ring, I'll stay one ring over it for now.
  88. 6:32I leave it there to be on the safe side, in
  89. 6:34case I accidentally make a mistake and work too deep.
  90. 6:39But we have to go there, to this dark ring.
  91. 6:41This is our finished back of the bow.
  92. 6:45Horst Perk has strong arm muscles.
  93. 6:47Does it take a lot of strength to work with the drawknife?
  94. 6:57A bit of power, yes, but it's also a lot of technology.
  95. 7:00The curved shape of the blade makes it a bit easier.
  96. 7:04Sure, you have to have a bit of strength,
  97. 7:07but with a little experience you can do it relatively easily.
  98. 7:13For the fine work on the knothole
  99. 7:15, the master carpenter changes tools.
  100. 7:20Alright
  101. 7:24. Now I'm going to get a chisel.
  102. 7:27I'm working it out here because there's still a throat in there.
  103. 7:35The principle remains the same: the bower removes the wood fiber by fiber
  104. 7:40and carefully approaches the annual ring for the back of the bow,
  105. 7:43which is supposed to hold the bow tension.
  106. 7:53Now the blank is in such good shape
  107. 7:55that Horst Perk can transfer the template.
  108. 8:00The blank has external dimensions of 1.92 meters.
  109. 8:05We want an arc length of 68 inches.
  110. 8:09We're about 1.73 meters there.
  111. 8:13So we have leeway in terms of length.
  112. 8:15So that I can get a bit out of the grip
  113. 8:18area and get the knothole closer to the limb,
  114. 8:21I walk a little bit, a few centimetres,
  115. 8:24three or four centimetres, I go to the right
  116. 8:27so that I can deal with the knothole a little better.
  117. 8:32Yes, four centimeters is enough.
  118. 8:36There is now my center of the bow.
  119. 8:43From there I measure the grip area.
  120. 8:47Six centimeters on each side, I make a mark there.
  121. 8:56In principle, that would be where you pick up the bow afterwards.
  122. 9:00From the grip, the curve
  123. 9:04becomes wider ... first of all, let's do about five centimeters.
  124. 9:08In length also about five centimeters.
  125. 9:17Here you can see the progression.
  126. 9:21We always stayed in the middle of the blank.
  127. 9:23It's always better to go with the wood.
  128. 9:26That's where you're right in the wood fiber, that
  129. 9:28's where the bow is most stable and unbreakable.
  130. 9:31We make a pyramidal arch.
  131. 9:35This means that this shape is at its widest from here
  132. 9:37and narrows outwards.
  133. 9:50Become evenly narrower towards the outside.
  134. 9:56Here you can clearly see how the wood fibers run around the branch.
  135. 10:03We stay outside, we can always get narrower.
  136. 10:14So, that's it now... the rough arc design,
  137. 10:18which will be adjusted a little bit later.
  138. 10:22Incidentally, the master carpenter came to bow making quite by accident.
  139. 10:31I worked for Caritas in Euskirchen.
  140. 10:34A participant in the measure worked on bow construction.
  141. 10:38I was on fire right away.
  142. 10:41I'm still in contact with him today, we keep in touch.
  143. 10:46Relatively close to the same time, we had a camp
  144. 10:50with another archer that we invited,
  145. 10:53where of course I also got infected.
  146. 10:56I then promptly did a bow
  147. 10:59making course myself with another bow maker.
  148. 11:02Then it happened to me.
  149. 11:06So now I'll start at the widest point.
  150. 11:10Horst Perk is now Bogner with body and soul.
  151. 11:14He runs a 3-D parcours, gives bow making and shooting courses,
  152. 11:19organizes tournaments
  153. 11:20and, among other things, builds selfbows from a piece of wood,
  154. 11:23to order and individually adapted.
  155. 11:26They are works of art.
  156. 11:36Two or three humps in there, I'll get rid of them now.
  157. 11:40The dialogue with the wood is a lengthy process.
  158. 11:50The carpenter reads the wood structure while
  159. 11:54he is working and always works with it, never against the grown wood.
  160. 12:12Wonderful!
  161. 12:13In this case, I start at the highest point of the branch,
  162. 12:16work my way outwards
  163. 12:18and then have to remove something in that direction.
  164. 12:22But I'll start at the highest point
  165. 12:24so I don't work against the grain of the wood.
  166. 12:30Always turning away from the knothole
  167. 12:32, Horst Perk carefully cuts away the wood
  168. 12:35fiber by fiber with the drawknife.
  169. 12:51The rough arc shape is worked out so far.
  170. 12:53Now a machine is being used for the first time:
  171. 12:56the band saw.
  172. 12:59(Machine noise)
  173. 13:08Horst Perk saws along the markings wherever
  174. 13:11a drawknife cannot or makes no sense.
  175. 13:15For example when diagonally sawing on the handle. The
  176. 13:28master carpenter also cuts away a good deal
  177. 13:29at the bottom of the blank
  178. 13:43. The sides are trimmed too.
  179. 13:46The later sheet becomes more and more recognizable in the former blank.
  180. 13:51(Birds chirping)
  181. 13:56So, I'll tie the bow again.
  182. 13:59Now we still have to remove the last growth ring.
  183. 14:11Soften the corners a bit,
  184. 14:13because they're pretty razor-sharp now,
  185. 14:16otherwise you're likely to cut yourself.
  186. 14:20The bogner carefully scrapes
  187. 14:22the previously selected growth ring.
  188. 14:25It must not be damaged,
  189. 14:27otherwise it will not be able to withstand the enormous tension later on.
  190. 14:32Horst Perk switches to the scraper to remove the wood even more precisely.
  191. 14:37(Birds chirping)
  192. 14:42In this phase, the woodworking
  193. 14:45is more reminiscent of wood carving.
  194. 14:49Finally, he scrapes the knothole free with a swan-neck blade,
  195. 14:54a concave blade...
  196. 15:02and a round file, one after the other.
  197. 15:11time for grinding.
  198. 15:17The master carpenter uses the belt grinder to reduce
  199. 15:21the width of the arch.
  200. 15:22(Machine noise)
  201. 15:27In the middle is the widest point.
  202. 15:29The wood tapers towards the ends of the limbs.
  203. 15:39(Machine noise)
  204. 15:54Again and again the scrutinizing look:
  205. 15:56How is the alignment, how does the wood fiber run?
  206. 16:10After processing with the machine, the master carpenter prepares
  207. 16:14the wood by hand for the first test:
  208. 16:17How does the bow blank react to stress?
  209. 16:31With the so-called "bottom tiller"
  210. 16:34, the archer carefully approaches the bending.
  211. 16:43I'll see, put the bow down on the ground.
  212. 16:47Then we'll see if he's starting to bend.
  213. 16:50What we can see is that it's a bit stiffer in this area.
  214. 16:55You mark it roughly with a pencil.
  215. 16:59This area and ...
  216. 17:03I still have to remove a bit there.
  217. 17:16There's one more spot I have to do.
  218. 17:19You can see that.
  219. 17:30The next step would be bank tilling.
  220. 17:34That means we clamp the bow here on the vice,
  221. 17:37in the grip area.
  222. 17:41And now look how the individual limbs bend.
  223. 17:46And see how the bending behavior of the limb is.
  224. 17:51You can see very well whether it is already bending nicely.
  225. 17:55The first real load. Can a bow break now?
  226. 17:59Usually nothing happens here, no.
  227. 18:02When something happens, it
  228. 18:05's usually much later, when the sheet is almost finished.
  229. 18:10It's too stiff overall, I
  230. 18:11still have to remove a bit of material
  231. 18:14in width and height .
  232. 18:17In sports, you would probably call it "fine tuning".
  233. 18:24The interplay of woodworking and stress test.
  234. 18:35Horst Perk grinds and scrapes the areas that
  235. 18:38cannot be bent properly yet.
  236. 18:54So we now have an end prepared
  237. 18:56for the mute, then mute for the recurve.
  238. 19:00Very important, you really have to stick to that, is
  239. 19:04that you work absolutely within the annual ring here.
  240. 19:06You can clearly see here,
  241. 19:08there are these three growth rings that we have in the sheet.
  242. 19:12And here this continuous annual ring must be maintained.
  243. 19:18So, I've got a recurve bender here.
  244. 19:22I'm going to clamp these in a vise now.
  245. 19:28It is put in there after steaming
  246. 19:30and then bent over the mold and then fixed.
  247. 19:34After steaming, we have a maximum of half a minute,
  248. 19:38then this process must be completed.
  249. 19:43So, now it comes to the hot phase, so to speak.
  250. 19:48So bow stomach side down.
  251. 19:50The bending of solid wood is an ancient technique
  252. 19:54and is still used today:
  253. 19:56first steam, then bend.
  254. 20:05We make a few small holes in the foil.
  255. 20:11Now let's light the fire, then it has to cook.
  256. 20:15Then it has to... It should have been
  257. 20:18steamed over the steam for half an hour
  258. 20:23. Bow and arrow – a childhood memory for Horst Perk too.
  259. 20:28(Hissing noises)
  260. 20:31In the country you have advantages, you can run through forest and fields
  261. 20:34with bow and arrow, I was lucky as a child too.
  262. 20:37And even bows made of hazelnut and other materials.
  263. 20:44Yes, and of course cowboys and Indians were also played.
  264. 20:47Winnetou was of course the role model for everyone in the past.
  265. 20:54After steaming, it has to be quick.
  266. 20:56The archer has 30 seconds
  267. 20:58to bend the throwing arm into shape and fix it.
  268. 21:23The steamed sheet has to dry in the mold overnight.
  269. 21:34OK, that worked out well. Yes!
  270. 21:39We have to fix a clamp again now,
  271. 21:43align the bow so that it is in flight now.
  272. 21:47I'll start here now. (Machine noise)
  273. 21:50A little further distance.
  274. 21:53Only the so-called "tempering", the heat treatment of the recurve ends,
  275. 21:57changes the wood cells permanently.
  276. 22:00Otherwise, the recurve would almost completely
  277. 22:02revert to its old form.
  278. 22:05So, now we wet it so that it cools down faster.
  279. 22:10And then, so that the wood gets a little damper again.
  280. 22:15While drying, Horst Perk has time to work on the tips
  281. 22:19to which the string is attached.
  282. 22:25To do this, he saws a slab of water buffalo horn into small pieces.
  283. 22:33The bowmaker grinds the ends of the limbs:
  284. 22:37the tips will be glued on there later.
  285. 22:40(Machine noise)
  286. 22:49So. Work
  287. 22:51on the surface here a bit more with the scraper.
  288. 23:09(He whispers incomprehensibly.)
  289. 23:18That fits very well.
  290. 23:20Now we're going to make longitudinal grooves here.
  291. 23:26I always do that with the scraper here.
  292. 23:37Clean up.
  293. 23:45Horn plates, of course, as well.
  294. 23:53Horst Perk glues the buffalo horn tiles to the limbs.
  295. 24:14The bowman uses the dry season to make arrows out of cedar wood.
  296. 24:21I turn it around, put it on at 29 now.
  297. 24:28If I drive right past here,
  298. 24:30I have exactly one...
  299. 24:35arrow length of 29.
  300. 24:38Precisely calculated:
  301. 24:40the length of the arrow depends on the draw length of the bow.
  302. 24:45That would now be the direction of the notch.
  303. 24:50Then we have a device here.
  304. 24:54With the "Selfnocker" he reaches the exact depth of the notch.
  305. 25:00The cut is made at right angles to the wood grain.
  306. 25:08I have now sawed the notch outside.
  307. 25:17The sawn notch, called Selfnock, is also carefully filed.
  308. 25:22Nothing should hinder the bowstring when shooting the arrows.
  309. 25:33That I have no sharp edges.
  310. 25:40The surface of the wooden arrows can be varnished,
  311. 25:43but also treated with linseed oil or hard wax oil.
  312. 25:55Cross out nicely towards the end.
  313. 25:59Check again to make sure you don't have any noses on it.
  314. 26:02Then it is placed in a device to dry.
  315. 26:07Arrows need shaped feathers for stable flight,
  316. 26:11Horst Perk chooses dyed turkey feathers.
  317. 26:24So now we're going to clip these feathers
  318. 26:27into this clip from the fletching tool.
  319. 26:31There are nice magnets there, you can attach it nicely.
  320. 26:34You have both hands free, this is now nicely glued to the keel.
  321. 26:39Centered on the keel.
  322. 26:47It will be cut off at the end.
  323. 26:54Now comes the shaft of the arrow ...
  324. 26:58in this guide purely from the fletching device.
  325. 27:19(Clicking sound)
  326. 27:26And there you have it...
  327. 27:29the three feathers and it already looks like an arrow.
  328. 27:39The Selfnock is heavily used
  329. 27:41and is therefore reinforced with an additional winding.
  330. 27:48Let's get an ending,
  331. 27:50put that on top a bit at an angle.
  332. 27:56And now we wrap up to the top of the tendon notch.
  333. 28:02And then slowly again ...
  334. 28:07that back, the material that we have too much, we just do ...
  335. 28:11pluck it off a bit.
  336. 28:22So, then we put the glue, which squirts out a bit anyway, ...
  337. 28:27right over the winding.
  338. 28:32And the winding is done.
  339. 28:42Only the tip is missing.
  340. 28:45In the Stone Age still made of flint,
  341. 28:48today of course made of metal.
  342. 29:02(Machine noise)
  343. 29:05The glue for the water buffalo horn plates of the tips
  344. 29:08is now dry. Horst Perk
  345. 29:17now grinds the tips to the right size
  346. 29:20to match the ends of the limbs .
  347. 29:34First with the edge grinder, then again by hand.
  348. 29:50He uses a round file to make the notch for the bowstring.
  349. 30:07The carpenter draws the notch in the middle of the string
  350. 30:11and files it out with a round file.
  351. 30:16(He blows.)
  352. 30:21Now we need to connect these to the two-sided tendon notches
  353. 30:27so the tendon can lay nicely in there.
  354. 30:39Like putting the bridle on a horse for the first time.
  355. 30:44With a tension cord, the bowman tests the tension
  356. 30:47on both limbs in parallel.
  357. 30:52Then the tension test with the bowstring.
  358. 30:59I pull it up, insert the string.
  359. 31:10See that she is in the tendon guide.
  360. 31:19I have to hold it here first,
  361. 31:21it tends to twist, now it's out again.
  362. 31:28(He groans.)
  363. 31:30I have to...
  364. 31:33(quietly:) That over there.
  365. 31:35A critical situation:
  366. 31:37the bow is twisted, the string jumps out.
  367. 31:40The bow bucks like a young horse.
  368. 31:47I have to treat the limb with heat and twist it,
  369. 31:51basically like this.
  370. 31:54He turns away to the side at the moment
  371. 31:58when he is tense that the tendon always jumps out.
  372. 32:02I basically have to stretch that.
  373. 32:06I have to do that in this area.
  374. 32:10I have to treat him with heat.
  375. 32:13But then I have to let him rest for now.
  376. 32:16Then it's time for today. Crap!
  377. 32:20Umm...
  378. 32:24The solid wood Selfbow is hard to tame.
  379. 32:34Horst Perk goes again with heat.
  380. 32:37To get the bow in shape, he has to bend the heated wood again,
  381. 32:41fix it and leave it to rest overnight.
  382. 32:51However, the twisted limb is not
  383. 32:54the only problem with this natural bow:
  384. 32:56a dangerous crack has appeared.
  385. 32:59A large knothole was there from the start.
  386. 33:02And there was an overgrown branch that
  387. 33:05I wanted to leave in at first as an overgrown branch in the arch.
  388. 33:10However, during the tilling process, it turned out
  389. 33:15that there was a slight crack in the branch.
  390. 33:18It was too tricky for me to leave it like that.
  391. 33:22That's why I drilled it out, that was the safest way.
  392. 33:27By drilling out I exposed the whole branch.
  393. 33:31These surprises just come when making a bow.
  394. 33:34We also had a twist in the blank, in the arch.
  395. 33:38We had to do some news.
  396. 33:41With a character arc like this, it's common
  397. 33:43that you don't directly when you want the tiller to
  398. 33:46be perfect.
  399. 33:49The next day. Can the bow be drawn now,
  400. 33:52or does the string slide back to the side?
  401. 34:07Horst Perk examines the bow critically in all directions.
  402. 34:13Yes, looks better.
  403. 34:17The endurance test on the tiller board:
  404. 34:19Both limbs must bend evenly.
  405. 34:27It's actually good to see that it bends better here now.
  406. 34:35It still looks a little different
  407. 34:39than the other side because of the branch, but that's okay.
  408. 34:49When you have built such a bow,
  409. 34:52it does not mean that it is finished.
  410. 34:55Zeroing is also part of bow making.
  411. 34:59The bow should also function permanently.
  412. 35:02It has to be zeroed in, so you have to approach it slowly,
  413. 35:05don't go straight to the full draw, but slowly the bow,
  414. 35:09because
  415. 35:12what he's doing now is also something completely new for the piece of wood. The bow wasn't born as a bow,
  416. 35:16but used to be a tree, a trunk.
  417. 35:19He has to be slowly introduced to archery.
  418. 35:25The first shot with the new recurve bow.
  419. 35:28First carefully, with restrained draw weight.
  420. 35:35(birdsong)
  421. 35:40(arrow hits)
  422. 35:42(water
  423. 35:52splashing) (arrow hits )
  424. 35:57Horst Perk critically controls the wood.
  425. 36:00He is satisfied.
  426. 36:01The bow behaves without any problems
  427. 36:03and obviously tolerates the load well.
  428. 36:10Measured to be on the safe side.
  429. 36:12The bow has not warped.
  430. 36:18The archer shoots around 100 test shots to be sure
  431. 36:22that the bow is reliable.
  432. 36:25Everything looks very good.
  433. 36:28(Birds chirping)
  434. 36:34I can really slow down too.
  435. 36:37When I have a bow in my hand,
  436. 36:39I often have a bit of stress from the trade, from being self-employed,
  437. 36:43after two or three shots I completely switched off.
  438. 36:52The final touch – again by hand, of course.
  439. 36:56Now that the technology is right, it's all about the optics.
  440. 37:11finish for the surface.
  441. 37:14Horst Perk applies a hard wax oil with a linen cloth
  442. 37:17for protection and for the look.
  443. 37:20It's an oil-wax combination, an open-pored application.
  444. 37:26This fires up the wood a bit, is an open-pored application.
  445. 37:31This gives a nice satin finish.
  446. 37:38Now the wood still shines quite brightly.
  447. 37:41Over the years, Osage Orange changes and darkens.
  448. 37:47As long as the bow dries, the bower can make the string.
  449. 37:51We need another tendon.
  450. 37:53That was just a trial string we've had so far.
  451. 37:57We're going to make a two-strand tendon.
  452. 38:01The material is called Dacron.
  453. 38:05From the draw weight we will have about 35 pounds with the bow afterwards.
  454. 38:10A twelve-strand tendon is definitely enough.
  455. 38:13That means we need to make six strands of each color.
  456. 38:18We now need to go around this pin, important to this pin with the 68.
  457. 38:25Go around the pin again.
  458. 38:29And once, the first time, over on the outside.
  459. 38:34We just follow the first thread now.
  460. 38:37Again around that 68 pin.
  461. 38:42Now it's important that we also have six strands up here.
  462. 38:49And again the cutter knife.
  463. 38:56So, and now it always rolls over to the top.
  464. 38:59One turn to the right, flip up.
  465. 39:03We keep doing this
  466. 39:08until we have about two and a half to three inches.
  467. 39:20We wrap it halfway around the pin.
  468. 39:24And now again above it.
  469. 39:27One turn to the right, above it.
  470. 39:43So that it doesn't work out on its own.
  471. 39:49We tie a simple knot around it.
  472. 39:55We are now doing both strands side by side.
  473. 39:58I have to go back here now.
  474. 40:01The middle of the tendon, which is subjected to a lot of stress
  475. 40:03, is reinforced with an additional thread.
  476. 40:06When the first four or five wraps are done...
  477. 40:11you can now... with a bit of feeling...
  478. 40:21With a special device, the thread wraps
  479. 40:23itself around the string.
  480. 40:32I then pull the loop through.
  481. 40:37We now have the thread here
  482. 40:41and have made a knotless connection, so to speak.
  483. 40:49Burned down what's left.
  484. 40:59We remove the tape mark.
  485. 41:08A little rubbed with wax.
  486. 41:16Except for the middle winding, you don't need to wax it anymore.
  487. 41:21And the string for our bow is ready.
  488. 41:25A perfect string,
  489. 41:27individually tailored to the draw weight of the shooter.
  490. 41:35For comfort and better grip:
  491. 41:37The Bogner fixes
  492. 41:41a piece of colored cowhide to the handle of the recurve bow with double-sided adhesive tape.
  493. 41:50(quietly:) So.
  494. 42:01So, now comes the other side.
  495. 42:05In addition, the handle cover is laced
  496. 42:07with a matching strap made of kangaroo leather.
  497. 42:15Kangaroo leather is robust and withstands high tensile loads.
  498. 42:23Then you have the same picture as above as well as below as a conclusion.
  499. 42:28A simple knot is actually enough,
  500. 42:31you can make a double knot.
  501. 42:33I usually tie a simple knot... for fixation.
  502. 42:40Yo, with the bungee cord together...
  503. 42:45let's draw the bow now.
  504. 42:49We stand again in the middle on the tension cord.
  505. 42:54Align the bow a bit, check
  506. 42:57whether the string is in the lower limb,
  507. 43:02pull up in the middle area.
  508. 43:13Yes, almost 16.5.
  509. 43:17So, let's shoot some arrows again.
  510. 43:20The recurve bow is finished and lies well in the hand,
  511. 43:23to the delight of the bow maker.
  512. 43:33Yes, that makes me happy.
  513. 43:35I'm always proud when one is finished, definitely.
  514. 43:38It's just a feast for the eyes.
  515. 43:46The final zeroing:
  516. 43:48This character sheet full of excitement and energy
  517. 43:51will bring a lot of joy to its shooter.
  518. 43:55(Water splashing, birds chirping)
  519. 44:10Because of the detailed work around the knotholes
  520. 44:13, such a magnificent specimen costs between 650 and 750 euros.
  521. 44:20It took Horst Perk almost a week
  522. 44:23to create an artistic recurve bow
  523. 44:25from an almost inconspicuous piece of wood
  524. 44:31. And the result probably goes far beyond the wildest dreams of children.
  525. 44:39(Quiet conversation)
  526. 44:43SWR 2019

About this transcript

This page contains the full transcript of Wie man einen Recurvebogen baut | SWR Handwerkskunst by SWR Handwerkskunst, generated from the public captions YouTube serves with the video. The transcript has 3,988 words across 526 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.