Vertical Curve Fundamentals | Highway Alignment and Design — Transcript
Full transcript
- 0:00in this video I'll cover the
- 0:03fundamentals of vertical curves and
- 0:04vertical alignment vertical curves are
- 0:07used to provide a smooth transition from
- 0:09one grade to another similar to
- 0:10horizontal curves except in this case
- 0:13we're looking at the vertical
- 0:15perspective so we're looking at a
- 0:16profile view of our roadway so imagine
- 0:19us kind of at the side of the road and
- 0:22so we can see the grade coming up hill
- 0:24the grade going downhill in this case we
- 0:27that's the scenario we have we have the
- 0:28entrance grade which is known as g1
- 0:31which then transitions to the vertical
- 0:34curve Trenton which transitions back
- 0:37into the grade the exit grade which is
- 0:40g2 so we'll use that terminology g1 and
- 0:44g2 when we're looking at vertical curves
- 0:47and vertical alignment on the x-axis
- 0:49we're gonna see the station E and this
- 0:52is always in horizontal distances so
- 0:54we're using the distances measured
- 0:56horizontally to represent the distances
- 0:59in the vertical plane so everything is
- 1:01just a horizontal distance and that
- 1:03really simplifies things for vertical
- 1:05curves the vertical curves I'll cover
- 1:08will assume we'll all be symmetric
- 1:11parabolic curves so symmetric means that
- 1:14they're equal on each side of the PVI so
- 1:17there's symmetry within the horizontal
- 1:19width in the vertical curve and
- 1:21parabolic meaning that the parabolic
- 1:24equation defines the shape of the
- 1:27vertical curve on the y axis we'll see
- 1:30the elevation as we move along the
- 1:33grades and the vertical curves there are
- 1:38two primary types of vertical curves a
- 1:40crest curve where we have that concave
- 1:43down shape and then a SAG curve we have
- 1:46the concave up shape the P VI is a very
- 1:51important point on for vertical curves
- 1:54these were the two tangents meet or the
- 1:56two grades meet so we have a g1 it's our
- 1:59entrance grade we have g2 which is our
- 2:01exit grade and those two grades will
- 2:04intersect at the P VI the point of
- 2:07vertical intersection we also have the
- 2:10PV C this is the point
- 2:12where
- 2:13the curve begins the point of a
- 2:15curvature so leaving entrance grade g1
- 2:19and starting to curve along the vertical
- 2:22curve then we'll reach the PV T the PV T
- 2:27is the point of vertical tangency this
- 2:29is the point where the curve ends and we
- 2:31return to the exit grade or g2 we use
- 2:37the term X to denote any horizontal
- 2:39distance along the curve so that's can
- 2:41be as small as 0 which would align with
- 2:44the point of the PBC or as long as L
- 2:47which is the full length of the curve
- 2:49which would correspond to the PV T and
- 2:51usually we were looking for the
- 2:53elevation of the curve at the point X so
- 2:56X is typically some point of interest in
- 2:59the analysis we use the capital letter Y
- 3:04for the elevation of the point along the
- 3:07curve that corresponds typically to our
- 3:10to our distance X so I have X is our
- 3:12horizontal distance and Y is the
- 3:15elevation of the point on the curve that
- 3:18we're interested in breaking that down a
- 3:24little bit more so looking at some of
- 3:25these components of vertical curves the
- 3:28lowercase letter Y is the distance
- 3:30between the extension of the entrance
- 3:32grade or if you're on the other side of
- 3:34the PV I the exit grade and the point on
- 3:37the vertical curve so this is that that
- 3:39distance between the tangent or the
- 3:42grade and the vertical curve this is
- 3:45known as the tangent offset and it's
- 3:47represented by the equation ax squared
- 3:52the middle ordinate M is the distance
- 3:55between the vertical curve and the chord
- 3:58that are drawn between the PVC and the
- 4:00PV T so again the curve and the chord
- 4:03both tie into the PVC and PV T in that
- 4:07distance M the middle ordinate is taken
- 4:09at the midpoint of the curve so aligned
- 4:12there with the PDI and it's also true
- 4:16that it's going to happen at a distance
- 4:18L over to the PDI for vertical curves
- 4:23when we're looking at a symmetric
- 4:24parabolic curve is always half
- 4:27a between the PVC and a PBT similar to
- 4:34the middle ordinate we have the external
- 4:35distance II this is the distance between
- 4:38the vertical curve and the P Vai and
- 4:42that's a common term that's denoted on
- 4:45vertical alignment drawings so one of
- 4:53the most common mistakes with vertical
- 4:55curve problems when applying the
- 4:58parabolic equation is not using the
- 5:01correct units so when we're dealing with
- 5:03the grades - 1 and G 2 those are always
- 5:06in percent and we the sign is very
- 5:09important so if G 1 in this case was
- 5:13positive 4 percent any equation that
- 5:17asked for G 1 in our parabolic formula
- 5:20we need to put in positive 4 for the
- 5:25exit grade so in this case maybe it's
- 5:27negative 3% we'd want to make sure we
- 5:29always put in G 2 as negative 3 so don't
- 5:33put those in percent for them leave them
- 5:34in there whole number or leave them in
- 5:36percent don't put them in there decimal
- 5:38form again all those grades in percent
- 5:40not in the decimal form the distances so
- 5:44X and L primarily these are all measured
- 5:47in stations where at one station equals
- 5:49100 feet so if the entire length of the
- 5:52curve L is 900 feet for the equations
- 5:56that ask for L you should put in nine
- 5:59stations so just a number 9 not 900 feet
- 6:02and so again these are very important
- 6:04when we start the calculation again
- 6:07another important assumption for
- 6:09symmetric parabolic curves is that the
- 6:12PB is always halfway between the PVC and
- 6:15PBT
- 6:16so using that relationship can usually
- 6:19help us find some missing information so
- 6:21PVC plus L over 2 will get you to the
- 6:26PDI and then another half of the length
- 6:28will take you all the way to the PBT so
- 6:33generally in mathematically looking at
- 6:36the parabolic curve you can use the
- 6:39equation y equals ax square
- 6:41plus BX plus C or AMD or constants and
- 6:46these can be positive or negative and
- 6:47we'll take a look at how these are
- 6:49specified for a vertical curve and C is
- 6:52the y-intercepts this is the point where
- 6:54the parabola crosses the y axis and as
- 6:58you can see in this drawing what that's
- 7:00going to relate to in vertical curves
- 7:01the parameter C is going to tie into the
- 7:06elevation at the PVC because it's going
- 7:08to be our starting point for
- 7:10establishing the elevation along the
- 7:12curve so y equals ax squared plus BX
- 7:18plus C this is our vertical curve
- 7:21equation we're going to specify it by
- 7:23using the terms that are specific to a
- 7:25vertical curve so for a vertical curve
- 7:30the term a is G 2 minus G 1 over 2 times
- 7:35L and again making sure we keep the
- 7:37grades in that case and percent and the
- 7:40length L in stations B is the entrance
- 7:44grade in percent that's G 1 again it's
- 7:48important to make sure if it's positive
- 7:49we keep that positive and it's
- 7:51negatively carry the negative with us
- 7:53see is our PVC elevations that's gonna
- 7:57set the starting point for any elevation
- 8:00we calculate along the curve and usually
- 8:02we'll be given the PDI elevation so if
- 8:05we're given the PVI we need to start
- 8:07with that elevation subtract off G 1
- 8:10times half the length and that will give
- 8:12us the PVC elevation and then X in this
- 8:16equation is the horizontal distance
- 8:18along the stationing access to any point
- 8:21of interest on the curve so we can find
- 8:23the elevation at any point along the
- 8:25curve X between 0 and L so we can't
- 8:30exceed those bounds because we then be
- 8:32on the tangents or the grades that are
- 8:34outside the PVC and the Pvt we can also
- 8:41look at the equation for the external
- 8:44distance again this is e this is the
- 8:46distance between the PDI and the
- 8:49midpoint of the curve at the PVI we know
- 8:52that X is going to be half the length
- 8:54because our
- 8:55as always bisecting the distance between
- 8:58the PVC and pvt so our external distance
- 9:02e equals y equals ax squared we can plug
- 9:07in our term for a G 2 minus G 1 over 2
- 9:11times L multiplied by L over 2 squared
- 9:16we that's our X is L over 2 simplifying
- 9:19that we get e equals a times L over 8
- 9:23where a is equal to the absolute
- 9:26difference in grades G 1 minus G 2 so
- 9:31that's how we can that's the equation
- 9:33that we can use for finding the external
- 9:35distance E
About this transcript
This page contains the full transcript of Vertical Curve Fundamentals | Highway Alignment and Design by Daniel Findley, generated from the public captions YouTube serves with the video. The transcript has 1,460 words across 200 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.