Vertex BD Full Design Process Overview — Transcript

Full transcript

1. 0:00this video will run through the entire
2. 0:01vertex PD design process from setting
3. 0:04the project it's to creating the
4. 0:05architectural and framing bubbles then
5. 0:08finally creating the outputs such as
6. 0:09drawings and reports first the new
7. 0:12project is created and information added
8. 0:14about it a series of parameters can then
9. 0:17be set up which will speed up the design
10. 0:20process such as setting maximum panel
11. 0:22lengths another way to make the design
12. 0:24process more efficient its assets of the
13. 0:263d levels which means the floors walls
14. 0:28and header heights will all be located
15. 0:30at the correct height with these done
16. 0:33now modeled the walls
17. 0:35floors and roofs
18. 0:37four walls and floors it is possible to
19. 0:40set some framing tools which used the
20. 0:42previously set up parameters as well as
21. 0:44setting profiles opening such doors and
22. 0:47windows can then we added parameters
23. 0:49done previously we'll make sure the
24. 0:50headers of these are the correct heights
25. 0:52once the architecture model is complete
26. 0:55the framing can then be added
27. 0:56starting the walls these are split into
28. 0:59separate panel lengths which can
29. 1:00subsequently be altered to suit
30. 1:02once the panel layout is finalized the
31. 1:05actual panel framing can be generated
32. 1:06and altered if necessary thousand
33. 1:10trusses similarly panels are envelopes
34. 1:12generated before their parts are
35. 1:14generated once the framing model is
36. 1:16finalized the outputs are then generated
37. 1:18starting with the panel drawings these
38. 1:20are labels to each panel and also
39. 1:22assigned partners to each profile within
40. 1:24the panel thus they are necessary to be
41. 1:26able to output to the NC in terms of the
42. 1:30NC this is a relatively simple process
43. 1:34however vertex will check for any
44. 1:36connection errors at the same time as
45. 1:37producing the NC files the use with the
46. 1:40RL farmer
47. 1:44Asians checked and the ANC data
48. 1:45completed the next step would be to
49. 1:48produce the plan drawings these use the
50. 1:50previously created floor plans and our
51. 1:53section and elevation drawings and can
52. 1:55be added to a drawing sheets another
53. 1:57output will be reports which will
54. 1:59quickly provide a full bill of materials
55. 2:01with a few button presses
56. 2:04this concludes our video on the full
57. 2:06vertex BD design process thank you for
58. 2:09watching