Translogic Blip Assist Quickshifter Not Working Fix!!! — Transcript

Full transcript

1. 0:00all right this is gonna be a short video
2. 0:02doesn't need to be long so i'm not gonna
3. 0:03make it long i have a translogic blip
4. 0:06assist set up and it uses the stock uh
5. 0:09quick shifter plug so it's this one
6. 0:12right here it's a 17 r6 i put it on the
7. 0:16first time i took it out it lasted for a
8. 0:19session and a half and then i lost the
9. 0:20quick shifter the blip worked all
10. 0:22weekend quick shifter came back one time
11. 0:26came back home i ripped the bike apart
12. 0:28went through the whole install couldn't
13. 0:30find anything wrong with it started
14. 0:32looking at the wiring on the bike
15. 0:34looking at the wiring going into the ecu
16. 0:36calling everybody everybody's getting
17. 0:38together trying to figure it out
18. 0:40i talked to translogic today and when i
19. 0:42got home i checked the one thing he told
20. 0:44me to check
21. 0:46and it was it and it literally doesn't
22. 0:48even take a tool to fix so the problem
23. 0:50was
24. 0:52the clutch switch right here
25. 0:54when
26. 0:56the plunger comes out it got
27. 0:58jammed you can see how it's still at an
28. 1:00angle
29. 1:01it got jammed underneath it so when the
30. 1:03lever went it when you released the
31. 1:05lever it wasn't hitting it and basically
32. 1:08the way that it's set up once the clutch
33. 1:11is pulled in it disables the quick
34. 1:14shifter so
35. 1:15when that plunger is not hitting the
36. 1:18lever then it thinks that the clutch is
37. 1:20pulled in at all times and you have no
38. 1:22quick shifter so i literally just pop
39. 1:24that back up pop the cover on the bottom
40. 1:27and it works perfect so hope this helps
41. 1:29a lot of people because i know a lot of
42. 1:30people are having issues with this stuff
43. 1:33but yeah just wanted to share my
44. 1:34knowledge thanks