YouTube2Text

The Network Settings That Fixed My Apple Smart Home (Unifi IoT Setup) — Transcript

by Shane Whatley · 2,877 words · 414 segments · language en · Watch on YouTube

Full transcript

  1. 0:00If your smart home randomly disconnects,
  2. 0:02scenes fail, or devices go no response,
  3. 0:05there's a good chance your network, not
  4. 0:07your actual smart home gear, is the real
  5. 0:09problem. I switched to UniFi a while
  6. 0:12back thinking it would kind of just fix
  7. 0:14everything, but it didn't. I was still
  8. 0:17running into issues with Apple Home,
  9. 0:19Matter, Thread devices until I changed a
  10. 0:23few key network settings. I get asked
  11. 0:26about this stuff all the time, so today
  12. 0:27I want to just walk you through my
  13. 0:30network setup and all the settings that
  14. 0:32I have in place. If you're using UniFi,
  15. 0:35you can probably just follow along
  16. 0:36directly, but even if you're not, these
  17. 0:38same principles should still apply, and
  18. 0:41we want to optimize our network
  19. 0:44specifically for Apple Home, Matter, and
  20. 0:47smart home devices in general. My name
  21. 0:49is Shane, and this channel is all about
  22. 0:51building a simple and effective smart
  23. 0:53home with new videos and live streams
  24. 0:55every week right here. If you watched my
  25. 0:58Apple Home 101 guide or any of my
  26. 1:00content before, you've probably heard me
  27. 1:02talk about how important it is to
  28. 1:04establish a strong network as the
  29. 1:06foundation of your smart home. And that
  30. 1:09remains true, but if your network
  31. 1:11configuration is just a little bit off,
  32. 1:14you may end up with more headaches than
  33. 1:17you bargained for when it comes to
  34. 1:19setting up and managing your smart home.
  35. 1:21Now, today we're not going to get too
  36. 1:22technical. I'm definitely not a
  37. 1:24networking expert, but I want to just
  38. 1:26show you how I currently have everything
  39. 1:29set up so my smart home works well,
  40. 1:32specifically as it relates to Apple
  41. 1:33Home, Thread, Matter, all that good
  42. 1:36stuff. So, let's go ahead and jump right
  43. 1:38in. Now, probably the most common
  44. 1:40question that I get is whether or not I
  45. 1:42use different networks or VLANs for my
  46. 1:45smart home devices and network, and the
  47. 1:47answer to that is yes. I do have a few
  48. 1:50different VLANs configured in my home. I
  49. 1:53have one for IoT devices that I connect
  50. 1:55all my smart home devices to, Another
  51. 1:58one for security cameras, and then I
  52. 1:59have my household network that I use for
  53. 2:02connecting all my main devices or the
  54. 2:04family's devices like iPhones,
  55. 2:06computers, and things like that. Now,
  56. 2:08would you be fine connecting everything
  57. 2:10to the same network? Yeah, probably.
  58. 2:13But, separating your smart home devices,
  59. 2:15which generally are less secure in
  60. 2:17nature, to a separate network from your
  61. 2:20phones and computers and stuff like that
  62. 2:22just gives an added layer of security.
  63. 2:25It is nice to have and just gives me a
  64. 2:27little extra peace of mind. So, I'm here
  65. 2:29in my UniFi dashboard, and to take a
  66. 2:31look at this or to set this up, we're
  67. 2:33going to go to settings and then tap on
  68. 2:36networks. Okay, now right here, you can
  69. 2:38see the different networks that I have
  70. 2:39set up. The core network, I've got my
  71. 2:41IoT network. I do have a guest network,
  72. 2:44household network, and then my camera
  73. 2:46network. So, those are basically
  74. 2:48multiple VLANs that I have set up. So,
  75. 2:50if you need to create a new network, you
  76. 2:52can do that by just tapping create new,
  77. 2:55but I'll just show you my IoT network
  78. 2:57here. Um you can check out some of the
  79. 2:59settings that I have in place, but the
  80. 3:02big thing we're looking at for here is
  81. 3:04IPv6. This is going to be really
  82. 3:06important when it comes to matter and
  83. 3:09your smart home. And matter is IPv6
  84. 3:12native internally, so our routers don't
  85. 3:15need public IPv6 internet, but they must
  86. 3:18support local IPv6 addressing correctly
  87. 3:22for routing and discovery between nodes.
  88. 3:25So, you can configure this here for your
  89. 3:27IoT VLAN, right? So, this is the IPv6
  90. 3:31settings, and you can pretty much just
  91. 3:32copy this right here and use these exact
  92. 3:34settings if you want. The only thing to
  93. 3:36note is that you need to give each VLAN
  94. 3:38a different local subnet so they don't
  95. 3:41conflict. So, that's right here. You can
  96. 3:44just change one number in here, and you
  97. 3:46can keep this at 64.
  98. 3:49But, if I go over to my household
  99. 3:51network, for example, go down to IPv6.
  100. 3:54You want to use the same settings, but
  101. 3:55you can just see here I just changed one
  102. 3:58number
  103. 3:59to make that different.
  104. 4:01I've got IoT.
  105. 4:03Okay, so the IPv6 settings and having
  106. 4:06that enabled on your VLANs is going to
  107. 4:10be very important for Matter, Thread,
  108. 4:13and all that stuff. Now, while we're
  109. 4:15here under the network tab, let's check
  110. 4:16out our mDNS settings. This is also
  111. 4:19going to be important right here. You do
  112. 4:21want to make sure that this is enabled
  113. 4:23and that you've added your both your
  114. 4:24trusted networks and your IoT networks
  115. 4:27here to this so they can communicate um
  116. 4:30across VLANs. Another thing that's quite
  117. 4:33important is to make sure IGMP
  118. 4:36snooping is off. And it might be enabled
  119. 4:39by default, so you do want to make sure
  120. 4:42that is off. Now, next, if you haven't
  121. 4:44already, you are going to want to set up
  122. 4:46some Wi-Fi SSIDs to broadcast
  123. 4:50your Wi-Fi network so devices can
  124. 4:51actually join the network. Now, I have
  125. 4:54three. I'm going to go over here to
  126. 4:55Wi-Fi, and you can see I have my IoT
  127. 4:58network, my main network, that that's
  128. 5:00the household network, and the guest
  129. 5:02network. Now, if you tap on one of
  130. 5:05these, now this is if you haven't
  131. 5:06already set this up, but you choose your
  132. 5:09Wi-Fi network. You can create another
  133. 5:11one to broadcast if you need to, if you
  134. 5:13haven't done this already, but you can
  135. 5:14see right here I got my I've got my IoT
  136. 5:17network, and right here is where you're
  137. 5:19going to choose which network is
  138. 5:22associated with that SSID. So, of
  139. 5:24course, I've got my IoT network chosen
  140. 5:27to associate with this SSID. Now,
  141. 5:30something I do want to mention here is
  142. 5:32that I know a lot of people, in fact,
  143. 5:34you can even see um it says right here,
  144. 5:37"For optimal IoT interoperability, we
  145. 5:40recommend creating a dedicated network
  146. 5:41for your 2.4 GHz IoT devices." And I do
  147. 5:45know a lot of people do like to do this
  148. 5:47for their IoT networks. They will
  149. 5:49disable the 5 GHz and 6 GHz or anything
  150. 5:52else and just broadcast a 2.4 GHz band.
  151. 5:57That's because most IoT devices do just
  152. 6:00require the 2.4 GHz band and
  153. 6:04I have always used a combined 2.4 and 5
  154. 6:08GHz band for my IoT network. And that is
  155. 6:11just because there are still a few
  156. 6:13devices that can take advantage of the 5
  157. 6:15GHz bands like some cameras and just
  158. 6:19different devices like some thermostats
  159. 6:22and things like that might be able to
  160. 6:23connect to a 5 GHz band. So I've always
  161. 6:26used both of these, used a combined
  162. 6:28network here and I haven't had any
  163. 6:30issues with that, but just something to
  164. 6:32take note of. You can use just 2.4,
  165. 6:35especially if maybe you're having issues
  166. 6:37connecting Wi-Fi devices that require a
  167. 6:402.4 GHz band. You can try that. You can
  168. 6:43just disable the 5 GHz band and and see
  169. 6:46if that works better for you. But again,
  170. 6:47this is how I have mine set up and I
  171. 6:49haven't had any issues because of this.
  172. 6:51And another thing to mention here, you
  173. 6:54do want to probably make sure this is
  174. 6:57turned off, multicast and broadcast
  175. 6:59blocker and also multicast to unicast.
  176. 7:03You want to make sure these are both
  177. 7:05turned off. So again, not going to go
  178. 7:07through every single setting, but I will
  179. 7:09just leave this here. You can feel free
  180. 7:11to pause at any point if you need to to
  181. 7:13see the way mine is set up using WPA2
  182. 7:17security on mine
  183. 7:19for my IoT network and that is how I
  184. 7:23have my IoT network and Wi-Fi set up. So
  185. 7:27now with those settings in place, your
  186. 7:29network should be all set up and you
  187. 7:30shouldn't have any issues connecting and
  188. 7:32using your smart home devices. We can go
  189. 7:34a step further for a little added
  190. 7:37security by creating some basic, very
  191. 7:39basic firewall rules, which I'll show
  192. 7:41you in just a minute, but first, a quick
  193. 7:44word from today's sponsor, Nuki. Nuki
  194. 7:46sells one of the best retrofit smart
  195. 7:49locks on the market. They are a leading
  196. 7:51European smart lock manufacturer, and
  197. 7:54last year they entered the US market.
  198. 7:56All Nuki smart locks are designed in
  199. 7:59Austria and made in Europe, and their
  200. 8:01high commitment to quality and
  201. 8:03engineering is definitely very obvious
  202. 8:05once you have one of these in hand. This
  203. 8:07is a matter over thread smart lock that
  204. 8:10can work on just about any door out
  205. 8:12there to supplement or replace a
  206. 8:15traditional key. They just released
  207. 8:17their new keypad two with NFC that pairs
  208. 8:21directly to the lock. Like the original
  209. 8:23keypad two, this gives you a fingerprint
  210. 8:25reader and a keypad for unlocking your
  211. 8:28door, plus support for NFC with
  212. 8:31tap-to-unlock.
  213. 8:33This gives you a digital key either in
  214. 8:35Samsung Wallet or Apple Wallet,
  215. 8:37depending on which phone you have, and
  216. 8:39you can use that to simply tap and
  217. 8:41unlock.
  218. 8:43The lock itself is very well built and
  219. 8:45compatible with a ton of different
  220. 8:46locks. You can keep the existing lock
  221. 8:49hardware on the outside of your door and
  222. 8:51just change out the backside. Keep using
  223. 8:54the same keys if you want, and get the
  224. 8:56added convenience of using your
  225. 8:57fingerprints, keypad, or home key to
  226. 9:01unlock your door. You can automate
  227. 9:03locking and unlocking based on your
  228. 9:05schedule, location, or smart home
  229. 9:07scenes. The Nuki lock is super easy to
  230. 9:10install and set up and gives you instant
  231. 9:12convenience and peace of mind. You never
  232. 9:15have to wonder if you remembered to lock
  233. 9:17your door anymore. I actually did a
  234. 9:19whole video on this lock when it first
  235. 9:21came out. I'll put a link to that video,
  236. 9:23the Nuki smart lock, as well as the new
  237. 9:26keypad two with NFC, down below in the
  238. 9:29video description if you want to check
  239. 9:31it out. And thanks to Nuki for
  240. 9:33sponsoring this video. All right, now
  241. 9:35the last thing I want to do is just
  242. 9:36share some real quick firewall rules for
  243. 9:39a little extra security. Now, this could
  244. 9:42easily break your smart home setup if
  245. 9:44you don't have it set up the right way,
  246. 9:45but it's very simple to do, especially
  247. 9:47with UniFi. So, let me show you how I
  248. 9:48have mine set up. And what we're doing
  249. 9:50here is basically going to prevent any
  250. 9:52of our devices from the IoT network from
  251. 9:55having access to our main network. This,
  252. 9:58like I said, is very easy to configure
  253. 10:00in UniFi. So, let me show you that. You
  254. 10:02just go to your settings here. And then
  255. 10:06you're going to go to the policy policy
  256. 10:08table. Now, I actually already have
  257. 10:11these set up, so you see I've got a few
  258. 10:13few rules right here that you can see
  259. 10:15allow IoT return traffic, block cameras,
  260. 10:18I have a block IoT.
  261. 10:20Um but, to set this up if you haven't
  262. 10:22already, you just create a new policy.
  263. 10:25And you can name it whatever you want.
  264. 10:27I'll just kind of imitate what I've
  265. 10:29already set up just to show you. So,
  266. 10:31we'll do allow IoT traffic.
  267. 10:36IoT return traffic.
  268. 10:41You select internal zone here.
  269. 10:43Choose allow.
  270. 10:46Choose internal right here. You leave
  271. 10:49these the same and then connection state
  272. 10:50right here when it tap return traffic
  273. 10:53and that really is it. That's all you
  274. 10:56have to do. So, that's just going to
  275. 10:57allow return traffic from your IoT
  276. 11:00network, you know, across your across
  277. 11:03your internal network. Choose add. Tap
  278. 11:05add policy and you're done with that
  279. 11:07one. Next, we're going to create another
  280. 11:09rule that's going to basically block the
  281. 11:10IoT network from being able to access
  282. 11:13our main household network. So, tap
  283. 11:17create new policy. I already have this
  284. 11:19set up, but I'm just going to imitate it
  285. 11:21again to show you. Call it block IoT to
  286. 11:25household.
  287. 11:28Okay. We're going to choose the network
  288. 11:30here.
  289. 11:32Select our network, our IoT network, and
  290. 11:35you can also do the cameras if you want,
  291. 11:37maybe if you have a separate network for
  292. 11:38that, but we'll leave it at IoT right
  293. 11:40now. Make sure block is selected, and
  294. 11:43then go here, tap on internal network,
  295. 11:47and you want to select your trusted
  296. 11:49network from here. So, that is my
  297. 11:51household network, and also my core
  298. 11:54network. I'll choose that also. Uh tap
  299. 11:56save. Okay, so what that's doing again,
  300. 11:59block IoT, that's going to block this
  301. 12:02network
  302. 12:04from communicating with this network.
  303. 12:07But again, remember, return traffic is
  304. 12:08enabled, so that should be fine.
  305. 12:11Uh and this should work fine. Make sure
  306. 12:13both is You can leave all this the same
  307. 12:16right here,
  308. 12:17and just click add policy,
  309. 12:20and you're done.
  310. 12:21I did also set up a another firewall
  311. 12:25rule to block my cameras internet access
  312. 12:28from my cameras from cameras accessing
  313. 12:30the internet. This one I just called
  314. 12:32block cameras internet access, so this
  315. 12:34is selecting my internal network, the
  316. 12:37camera network. Again, that's the name
  317. 12:39of a specific network that I put all my
  318. 12:41cameras on, a VLAN.
  319. 12:44And I have block external. So, that's
  320. 12:47blocking all external communication uh
  321. 12:50from my cameras.
  322. 12:52Pretty much just leave all this the
  323. 12:54same,
  324. 12:56and save your rule.
  325. 12:59And that's it. Now, that's basically
  326. 13:00blocked my cameras from outside
  327. 13:02internet, but everything still works
  328. 13:04well within my local network. Now, our
  329. 13:07main trusted network can communicate
  330. 13:09with the IoT network, and return traffic
  331. 13:12is allowed, but the IoT network is
  332. 13:14otherwise blocked from accessing our
  333. 13:16main network where we keep our phones
  334. 13:18and everything like that, keeping the
  335. 13:20devices on your main network more
  336. 13:23isolated and secure. Now, another big
  337. 13:25question that I hear a lot is like what
  338. 13:27what network or VLAN should I put my
  339. 13:30smart home hubs on? I don't really think
  340. 13:33there's a right or wrong answer. I've
  341. 13:35just had better success with putting my
  342. 13:39like my Apple home hubs and home
  343. 13:41assistant, anything like that on my IoT
  344. 13:44network. I do know a lot of people who
  345. 13:46also will put it on their main trusted
  346. 13:49network. I don't know that there's a
  347. 13:50right or wrong answer. Again, for me
  348. 13:52with all my devices, I've just had
  349. 13:54better success putting my Apple TVs, my
  350. 13:57home hubs, everything on that IoT
  351. 13:59network and then just keeping my
  352. 14:01iPhones, computers, and things like that
  353. 14:03on my trusted network. And that's how I
  354. 14:05do it and to me that also just keeps it
  355. 14:07a little more simple. HomePods, all the
  356. 14:09smart home devices are on the IoT
  357. 14:11network. And I have it set up like this.
  358. 14:14I haven't had any issues uh because of
  359. 14:17some of the rules and everything the way
  360. 14:18we set it up with mDNS and everything,
  361. 14:21the iPhones and everything can still
  362. 14:23communicate with devices on the IoT
  363. 14:25network and stuff like that. So, things
  364. 14:28like AirPlay, the remote control on your
  365. 14:31phone for your Apple TVs, all that stuff
  366. 14:33still works for me. I don't have any
  367. 14:35issues there. So, again, that's just how
  368. 14:37I have mine set up, but um I you could
  369. 14:40probably go either way, but that's how
  370. 14:41I've done mine. If I pull up
  371. 14:45my Apple Home
  372. 14:47uh setup here,
  373. 14:49this is Apple Home.
  374. 14:52See, I've got a bunch of cameras, a ton
  375. 14:54of devices here in my Apple Home setup.
  376. 14:58Uh just to show you a few.
  377. 15:00If we tap on
  378. 15:02accessories, this is where your
  379. 15:05accessories that are no response will
  380. 15:06show up. If I tap on that, I've just got
  381. 15:08two that I'm well aware of that these
  382. 15:10are not no response. Um I've kind of
  383. 15:13neglected these for specific reasons,
  384. 15:16but everything else is working well. I
  385. 15:18have no issues, no no response devices.
  386. 15:21Um I'm able to access my smart home
  387. 15:23setup, on my network, as well as off my
  388. 15:26network when I'm out on, you know,
  389. 15:28cellular and stuff like that. And
  390. 15:30everything is working nice and smooth.
  391. 15:32So, if you're doing anything differently
  392. 15:34or have any questions, feel free to drop
  393. 15:36a comment down below in the comment
  394. 15:38section. No wrong answers or bad
  395. 15:40questions there. We're all just trying
  396. 15:41to make the most out of our smart home
  397. 15:43setups. And I do think that optimizing
  398. 15:46your home network is probably the best
  399. 15:48place to start when it comes to that. I
  400. 15:51hope showing you my setup here today was
  401. 15:53helpful. If you're also building a smart
  402. 15:56home and you'd like to join our
  403. 15:57community and support this channel,
  404. 15:59consider becoming a channel member and
  405. 16:01get access private Discord server, among
  406. 16:04other perks for just about $5 a month.
  407. 16:07There should be a join button down below
  408. 16:09next to the subscribe button. We'd love
  409. 16:11to see you over there in the Discord
  410. 16:13server or here on the channel.
  411. 16:15Otherwise, check out these other videos
  412. 16:17here on screen that you might find
  413. 16:19helpful. Thanks so much for watching,
  414. 16:21and I'll see you in the next video.

About this transcript

This page contains the full transcript of The Network Settings That Fixed My Apple Smart Home (Unifi IoT Setup) by Shane Whatley, generated from the public captions YouTube serves with the video. The transcript has 2,877 words across 414 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.