Task 3 part 1 — Transcript

Full transcript

1. 0:00Okay. So, hello guys. Um, this will be a
2. 0:03tutorial for this um building right
3. 0:05here. So, I've seen people who are
4. 0:08struggling on how to fix this part right
5. 0:11here. So, if you look at this part of
6. 0:14the building, this should be drawn as
7. 0:16one building only. Okay, one panel. So,
8. 0:19let's try to do let's try to fix this
9. 0:21one together. Okay. So first let's draw
10. 0:24the base. Again use E or F when labeling
11. 0:27the base.
12. 0:31So
13. 0:35so after we have captured this part of
14. 0:38the building, we are going to
15. 0:42draw its redge.
16. 0:48So and
17. 0:51okay
18. 0:53so first panel.
19. 0:56Okay. So if you see red meaning it's not
20. 0:58connected to the our base below. So we
21. 1:00need to redraw.
22. 1:03So the base should be um
23. 1:07orange. I think it's orange.
24. 1:12So
25. 1:14and sorry.
26. 1:18So and then lastly this one. So for this
27. 1:23uh right here we need to draw
28. 1:28a r.
29. 1:32Okay. So again
30. 1:35adjust. So guys again your um assist
31. 1:38line is unlimited so don't be afraid to
32. 1:42use it.
33. 1:45You can use it as much as you want.
34. 1:47Okay.
35. 1:49Next is this one.
36. 1:58Okay. So use your right as reference.
37. 2:00Let's look for other views. Let's see if
38. 2:03we drawn it properly.
39. 2:06Let's try this one.
40. 2:10Okay. So, I think it's correct. Let's
41. 2:13And then how to fix this one right here.
42. 2:15So, if you look at this guys, it should
43. 2:17be drawn as one building. Correct? So,
44. 2:19all we need to do is to just drag this
45. 2:22panel right here. So, select this one.
46. 2:25Add a dot.
47. 2:28A dot. And then let's try to pull this
48. 2:32part right here. So as you can see we
49. 2:34have
50. 2:36an extended
51. 2:38panel. Okay. So let's check user write
52. 2:42as reference. Okay. So I think we
53. 2:44captured it properly.
54. 2:46And lastly, we just need to draw its
55. 2:48base. So how to capture the base? So
56. 2:50first,
57. 2:57so I suggest guys uh you put an assist
58. 3:01line so that you will know where to
59. 3:04stop. So so like so. Okay. So again,
60. 3:07let's draw its base from here. Click
61. 3:10here. Click from uh copy the direction
62. 3:14and like so. And then lastly, all you
63. 3:17need to do is suggest drag. Okay. And
64. 3:20close. We need to close this part. Close
65. 3:23this part right here. And then uh copy
66. 3:27the uh what do you call this? The main
67. 3:30wall of the building. So firstly you
68. 3:32need to group and then press J. And then
69. 3:36select the main building. Press uh six.
70. 3:40So as you can see it copied the wall of
71. 3:42the main building. So all we need to do
72. 3:43is just remove this purple panels, group
73. 3:46and then use auto fix f4.
74. 3:52So hopefully it will merge all the build
75. 3:54all the panel search here. So your final
76. 3:57result should look like this. All you
77. 3:58need to do is just add uh missing
78. 4:00corners. Okay? So we only need one
79. 4:02corner for this task. Okay. So, hope
80. 4:05this helps.