Studying Earthquakes — Transcript
Full transcript
- 0:00This week’s lab is about earthquakes.
- 0:02In the first part of the lab, we’re going to be using seismographs which provide a record
- 0:09of the intensity shaking, ground shaking of a given location during the passage of seismic
- 0:14waves.
- 0:15We’re going to be using that record, provided by seismographs, to determine how far away
- 0:21a given station location is from the epicenter based on the difference in arrival times between
- 0:28the P waves which are faster and the S waves which are slower.
- 0:33Because the P waves travel at faster velocities, they’re going to arrive at the seismograph
- 0:38first and be recorded first.
- 0:41Then sometime later the slower S waves are going to arrive.
- 0:45That lag time between the P and S waves is a function of how far the given station is
- 0:52from the earthquake’s epicenter.
- 0:55Now each given station provides a distance from the epicenter but not a direction.
- 1:04You’re getting distance from the difference in arrival times between the fast P and the
- 1:10slower S waves but you don’t necessarily know the direction that the seismic waves
- 1:13are coming from.
- 1:15As a result you have to use distances determined from 3 or more seismographs to triangulate
- 1:23the epicenter, and the way we do that is to basically go to a map, we’ve got distances
- 1:29for 3 different stations, draw a circle around each station that has a radius equal to that
- 1:36station’s distance from the epicenter.
- 1:37And if we do our measurements carefully, those three circles will intersect at a single point,
- 1:43that point is the epicenter.
- 1:46From seismographs we also determine the Richter magnitude of the earthquake.
- 1:53Richter magnitude is based on the amplitude of seismic waves at a given distance from
- 1:58the epicenter.
- 1:59We already know the distance of each station of the epicenter based on the difference in
- 2:05arrival times of the P and S waves.
- 2:08We’ll then measure the amplitude of seismic waves on that seismograph to determine the
- 2:19Richter magnitude.
- 2:20And the Richter scale accounts for decreasing amplitude with increasing distance of that
- 2:27station from the earthquake’s epicenter.
- 2:32This seismograph shows P, S, and surface waves generated by the 2001 Nisqually earthquake
- 2:42which had an epicenter near Olympia in Western Washington.
- 2:48This seismograph was recorded all the way in Oklahoma by the Oklahoma Geological Survey,
- 2:54we’re talking about several thousand kilometers from the earthquake’s epicenter.
- 3:00These seismographs are sensitive enough to pick up the ground shaking even if it’s
- 3:05too small for people to actually feel.
- 3:08Again our P waves are fastest, so P waves get there first.
- 3:14So here are our P waves, with their faster seismic velocities.
- 3:21The next set of waves to show up are the S waves.
- 3:29S stands for secondary, slightly slower velocities, these are the S waves.
- 3:38And finally the last group of seismic waves to register on the seismograph are the surface
- 3:42waves, waves that travel along our surface, they are the slowest of the different types
- 3:51of seismic waves and they also have the largest amplitudes.
- 4:05So for the purposes of determining the distance of this station from the earthquake’s epicenter
- 4:10we need to look at the difference in arrival times between the fast P waves and the slower
- 4:17S waves.
- 4:19So we find when P waves first start being recording on the seismograph, note the time,
- 4:26find with the S waves first start being recording on the seismograph, note the time, we find
- 4:35in this example the difference in arrival times between the P and S waves is about four
- 4:41and half minutes.
- 4:46We can then use the seismic wave velocity graph to relate that difference in arrival
- 4:53times between the fast P and the slow S waves back to a distance of that station to the
- 5:01epicenter.
- 5:02So the x-axis difference in arrival times between our P and S waves as measured from
- 5:09the seismograph, the y-axis is the distance to the epicenter that corresponds to that
- 5:17difference in arrival times.
- 5:21For example, if you find that the P and S waves start about 60 seconds apart, 60 seconds
- 5:34corresponds to a distance of about 600 kilometers for that station from the earthquake epicenter.
- 5:46In the case of the Nisqually earthquake, difference in arrival time was four and a half minutes,
- 5:57where one minute is 600 kilometers, so we have a distance from the Oklahoma station
- 6:11to the epicenter of about 2700 kilometers.
- 6:15Now again, each station gives only a distance of that station to the epicenter but not the
- 6:23direction so each station defines a circle of possible locations where the radius equals
- 6:38distance of that station to the epicenter.
- 6:48So take a compass, this kind of compass, use your scale bar to measure out the distance
- 6:58that you determined from the difference in arrival times and then draw that distance
- 7:03on the map as a circle centered on that particular station.
- 7:13So here we’ve done a radius, a circle with a radius of 2700 kilometers, centered on the
- 7:22Oklahoma seismograph station that recorded the Nisqually earthquake.
- 7:28The epicenter could have been anywhere along that circle, as a result, we need at least
- 7:383 stations to triangulate the epicenter.
- 7:433 stations, each has it’s own unique distance from the epicenter from the difference in
- 8:02arrival times between the P and the S waves, defining a circle of possible locations for
- 8:15the epicenter.
- 8:17Three circles intersect at a single point, that point is the earthquake’s epicenter.
- 8:29So here is a sample seismograph that you have in the first page of your lab packet.
- 8:38Here we see on each of the seismographs that you are working with, the time that P waves
- 8:46first start being recording is set to time 0.
- 8:50Which is of course is some time after the earthquake has been, how long it took P waves
- 8:53to reach the station, which is a function of how far that station is from the epicenter.
- 8:59S waves arrive some time afterwards, here is where the S waves first start arriving.
- 9:05That difference in arrival times for this sample is 36 seconds.
- 9:13We’ll use that difference in arrival times to determine a distance of that station to
- 9:22the earthquake’s epicenter.
- 9:27To determine the magnitude of the earthquake, the Richter magnitude, we also need the amplitude
- 9:34of seismic waves.
- 9:37Amplitude is defined as the maximum deviation from a horizontal line.
- 9:43So you’re not measuring the total vertical difference but rather difference from 0, difference
- 9:49above or below zero.
- 9:55Maximum wave amplitude for this example is about 185 millimeters.
- 10:10So in the example, we found the P difference in arrival times between the P and the S waves
- 10:15was 36 seconds.
- 10:24We find that that 36 seconds corresponds to a distance to the epicenter of about 365 kilometers.
- 10:38Now this is the Richter scale which you also have in your lab packet.
- 10:54You can see the Richter scale relates amplitude to distance from the epicenter to find the
- 11:05Richter magnitude.
- 11:06And so doing the Richter scale accounts for the fact that all other factors being equal,
- 11:13the amplitude of seismic waves being registered on a seismograph will decrease with distance
- 11:20of that seismograph from the earthquake’s epicenter.
- 11:25In the sample seismograph we found that a station that was 365 kilometers from the epicenter
- 11:42with a difference in arrival times between the P and S waves of about 36 seconds produced
- 11:47an amplitude of ground shaking of about 185 millimeters.
- 12:02Draw a straight line between those two points, see where they cross the third axis, the middle
- 12:07axis, which is the Richter scale.
- 12:10We find a magnitude for that earthquake of 6.4. 6.3 to 6.4 or something like that.
- 12:22Now you have 3 different seismographs to work with, each one is at a different distance
- 12:28from the epicenter, so it has a different amplitude of shaking but remember that the
- 12:32Richter scale accounts for the difference in amplitude with distance, changing distance
- 12:39from the epicenter.
- 12:41Each of your three seismographs should give you approximately the same Richter magnitude
- 12:47to within a 10th or so.
- 12:52There can be small differences in amplitude that are not due to distance from the epicenter
- 12:57but instead due to site specific geologic conditions, in particular, how the seismic
- 13:04wave amplitude is affected by passage through different types of rocks and sediments with
- 13:11different densities.
- 13:16So in the second part of the lab we’re going to be looking at how the amplitude of ground
- 13:22shaking and the intensity of damage from the earthquake varies as a function not only of
- 13:26how strong the earthquake was and how close a given location was from the epicenter but
- 13:33also what types of geologic materials are found at that particular location.
- 13:40In other words, the amplitude of shaking that you see at any given site is affected by the
- 13:45types of geologic materials those seismic waves are passing through.
- 13:50When seismic waves are passing through dense rocks such as igneous or metamorphic rocks,
- 13:57they travel at faster velocities.
- 14:03As a result they have lower amplitudes.
- 14:06But as density decreases, the seismic waves passing through that material slows down and
- 14:18as a result their amplitudes increase.
- 14:22So geologic materials that are dense such as igneous rocks and well consolidated, compact
- 14:37sedimentary rocks, waves are relatively fast and they get slower in materials with lower
- 14:55densities.
- 14:56As a result their amplitudes are increasing as velocity of the seismic waves decreases.
- 15:19So if you build your house let’s say on soft unconsolidated sediments, especially
- 15:30material that is water saturated, you’re going to experience a larger amplitude of
- 15:34shaking for a given magnitude and a given distance from the epicenter.
- 15:40If your house is built upon solid bedrock, you are going to experience a lower amplitude
- 15:51of shaking even at the same distance from the epicenter.
- 15:57As a result, we’d expect more damage, more intensity, at locations built in softer material
- 16:07with slower velocities and higher amplitudes, and less damage and intensity at sites built
- 16:16on dense solid bedrock with faster seismic wave velocities and lower amplitudes of shaking.
- 16:29So in the lab, you’re working with the 1989 Bay Area earthquake that occurred during the
- 16:35World Series.
- 16:37Some of you may be old enough to remember this event.
- 16:41You’ve been given a list of towns with observations of the damage and intensity of shaking caused
- 16:52by that earthquake.
- 16:53For each location, you’re going to assign an intensity value using the Mercalli intensity
- 17:04scale.
- 17:05Now this is a somewhat qualitative exercise so half of the locations have been done for
- 17:13you.
- 17:14You’ll need to assign intensities for the other locations.
- 17:18But as long as you are assigning higher values to locations with more damage and lower values
- 17:26to locations with less damage, you’ll get the right pattern.
- 17:31You’re going to go to the map, plot the intensity value for each location, and contour
- 17:39the data as a way to visualize the spatial pattern of intensity.
- 17:47This is an intensity map for the 1989 earthquake, uh for the 1906 earthquake.
- 17:54It’s epicenter was approximately there.
- 18:03Now you would general expect intensity to decrease with distance from the epicenter,
- 18:22however intensity can be locally higher where your seismic waves are amplified by
- 18:39soft geologic materials.
- 18:46For example we see the highest intensity not at the epicenter but near Santa Rosa, telling
- 18:53us that waves, seismic waves are passing through softer materials in that area, they’re slowing
- 18:59down and their amplitude in increasing as a result.
- 19:04So when you make your intensity map for the 1989 earthquake, what you’re going to find
- 19:15is that there are two areas of maximum intensity, one near the epicenter, that’s to be expected,
- 19:24and the other where waves were amplified by soft geologic materials.
About this transcript
This page contains the full transcript of Studying Earthquakes by Oregon State University Ecampus, generated from the public captions YouTube serves with the video. The transcript has 1,947 words across 164 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.