Stoichiometry | Chemical reactions and stoichiometry | Chemistry | Khan Academy — Transcript
Full transcript
- 0:00We know what a chemical equation is and we've learned
- 0:03how to balance it.
- 0:04Now, we're ready to learn about stoichiometry.
- 0:07And this is an ultra fancy word that often makes people
- 0:12think it's difficult.
- 0:13But it's really just the study or the calculation of the
- 0:18relationships between the different
- 0:20molecules in a reaction.
- 0:21This is the actual definition that Wikipedia gives,
- 0:24stoichiometry is the calculation of quantitative,
- 0:26or measurable, relationships of the
- 0:28reactants and the products.
- 0:30And you're going to see in chemistry, sometimes people
- 0:32use the word reagents.
- 0:34For most of our purposes you can use the word reagents and
- 0:40reactants interchangeably.
- 0:42They're both the reactants in a reaction.
- 0:44The reagents are sometimes for special types of reactions
- 0:46where you want to throw a reagent in and see if
- 0:49something happens.
- 0:50And see if your belief about that substance is true or
- 0:52things like that.
- 0:53But for our purposes a reagent and
- 0:55reactant is the same thing.
- 0:56So it's a relationship between the reactants and the products
- 0:59in a balanced chemical equation.
- 1:01So if we're given an unbalanced one, we know how to
- 1:02get to the balanced point.
- 1:03A balanced chemical equation.
- 1:05So let's do some stoichiometry.
- 1:10Just so we get practice balancing equations, I'm
- 1:12always going to start with unbalanced equations.
- 1:14Let's say we have iron three oxide.
- 1:21Two iron atoms with three oxygen atoms.
- 1:26Plus aluminum, Al.
- 1:30And it yields Al2 O3 plus iron.
- 1:40So remember when we're doing stoichiometry first of all, we
- 1:42want to deal with balanced equations.
- 1:43A lot of stoichiometry problems will give you a
- 1:45balanced equation.
- 1:46But I think it's good practice to actually balance the
- 1:48equations ourselves.
- 1:48So let's try to balance this one.
- 1:50We have two iron atoms here in this iron three oxide.
- 1:55How many iron atoms do we have on the right hand side?
- 1:57We only have one.
- 1:58So let's multiply this by 2 right here.
- 2:03All right, oxygen, we have three on this side.
- 2:06We have three oxygens on that side.
- 2:09That looks good.
- 2:10Aluminum, on the left hand side we only have
- 2:12one aluminum atom.
- 2:14On the right hand side we have two aluminum atoms. So we have
- 2:16to put a 2 here.
- 2:18And we have balanced this equation.
- 2:21So now we're ready to do some stoichiometry.
- 2:28There's not just one type of stoichiometry problem, but
- 2:30they're all along the lines of, if I give you x grams of
- 2:33this how many grams of aluminum do I need to make
- 2:36this reaction happen?
- 2:37Or if I give you y grams of this molecule and z grams of
- 2:42this molecule which one's going to run out first?
- 2:44That's all stoichiometry.
- 2:45And we'll actually do those exact two types of problems in
- 2:48this video.
- 2:49So let's say that we were given 85 grams of the iron
- 3:00three oxide.
- 3:03So my question to you is how many grams of
- 3:07aluminum do we need?
- 3:11Well you look at the equation, you immediately
- 3:13see the mole ratio.
- 3:15So for every mole of this, so for every one atom we use of
- 3:21iron three oxide we need two aluminums.
- 3:25So what we need to do is figure out how many moles of
- 3:29this molecule there are in 85 grams. And then we need to
- 3:33have twice as many moles of aluminum.
- 3:35Because for every mole of the iron three oxide, we have two
- 3:38moles of aluminum.
- 3:39And we're just looking at the coefficients, we're just
- 3:41looking at the numbers.
- 3:42One molecule of iron three oxide combines with two
- 3:46molecule of aluminum to make this reaction happen.
- 3:49So lets first figure out how many moles 85 grams are.
- 3:54So what's the atomic mass or the mass number
- 3:58of this entire molecule?
- 4:00Let me do it down here.
- 4:02So we have two irons and three oxygens.
- 4:08So let me go down and figure out the atomic masses of iron
- 4:14and oxygen.
- 4:15So iron is right here, 55.85.
- 4:20I think it's fair enough to round to 56.
- 4:23Let's say we're dealing with the version of iron, the
- 4:25isotope of iron, that has 30 neutrons.
- 4:28So it has an atomic mass number of 56.
- 4:32So iron has 56 atomic mass number.
- 4:35And then oxygen, we already know, is 16.
- 4:40Iron was 56.
- 4:47This mass is going to be 2 times 56 plus 3 times 16.
- 4:56We can do that in our heads.
- 4:57But this isn't a math video, so I'll get
- 4:59the calculator out.
- 5:062 times 56 plus 3 times 16 is equal to 160.
- 5:16Is that right?
- 5:17That's 48 plus 112, right, 160.
- 5:20So one molecule of iron three oxide is going to be 160
- 5:29atomic mass units.
- 5:32So one mole or 6.02 times 10 to the 23 molecules of iron
- 5:41oxide is going to have a mass of 160 grams.
- 5:55So in our reaction we said we're starting off with 85
- 5:58grams of iron oxide.
- 6:00How many moles is that?
- 6:02Well 85 grams of iron three oxide is equal
- 6:08to 85 over 160 moles.
- 6:13So that's equal to, 85 divided by 160 equals 0.53125.
- 6:21Equals 0.53 moles.
- 6:25So everything we've done so far in this green and light
- 6:27blue, we figured out how many moles 85 grams of
- 6:31iron three oxide is.
- 6:34And we figured out it's 0.53 moles.
- 6:36Because a full mole would have been 160 grams. But
- 6:38we only have 85.
- 6:39So it's point 0.53 moles.
- 6:41And we know from this balanced equation, that for every mole
- 6:44of iron three oxide we have, we need to have
- 6:46two moles of aluminum.
- 6:48So if we have 0.53 moles of the iron molecule, iron three
- 6:54oxide, then we're going to need twice as many aluminum.
- 6:58So we're going to need 1.06 moles of aluminum.
- 7:06I just took 0.53 times 2.
- 7:09Because the ratio is 1:2.
- 7:11For every molecule of this, we need two molecules of that.
- 7:14So for every mole of this, we need two moles of this.
- 7:16If we have 0.53 moles, you multiply that by 2, and you
- 7:20have 1.06 moles of aluminum.
- 7:23All right, so we just have to figure out how many grams is a
- 7:26mole of aluminum and then multiply that times 1.06 and
- 7:29we're done.
- 7:30So aluminum, or aluminium as some of our friends across the
- 7:36pond might say.
- 7:38Aluminium, actually I enjoy that more.
- 7:41Aluminium has the atomic weight or the
- 7:47weighted average is 26.98.
- 7:48But let's just say that the aluminium that we're dealing
- 7:51with has a mass of 27 atomic mass units.
- 7:58So one aluminum is 27 atomic mass units.
- 8:04So one mole of aluminium is going to be 27 grams. Or 6.02
- 8:12times 10 to 23 aluminium atoms is going to be 27 grams. So if
- 8:18we need 1.06 moles, how many is that going to be?
- 8:21So 1.06 moles of aluminium is equal to 1.06 times 27 grams.
- 8:31And what is that?
- 8:351.06 times 27.
- 8:41Equals 28.62.
- 8:42So we need 28.62 grams of aluminium, I won't write the
- 8:51whole thing there, in order to essentially use up our 85
- 8:56grams of the iron three oxide.
- 8:58And if we had more than 28.62 grams of aluminium, then
- 9:04they'll be left over after this reaction happens.
- 9:07Assuming we keep mixing it nicely and the whole reaction
- 9:10happens all the way.
- 9:11And we'll talk more about that in the future.
- 9:15And in that situation where we have more than 28.63 grams of
- 9:19aluminium, then this molecule will be the limiting reagent.
- 9:24Because we had more than enough of this, so this is
- 9:27what's going to limit the amount of this
- 9:31process from happening.
- 9:32If we have less than 28.63 grams of, I'll start saying
- 9:36aluminum, then the aluminum will be the limiting reagent,
- 9:40because then we wouldn't be able to use all the 85 grams
- 9:43of our iron molecule, or our iron three oxide molecule.
- 9:47Anyway, I don't want to confuse you in the end with
- 9:49that limiting reagents.
- 9:50In the next video, we'll do a whole problem devoted to
- 9:53limiting reagents.
About this transcript
This page contains the full transcript of Stoichiometry | Chemical reactions and stoichiometry | Chemistry | Khan Academy by Khan Academy, generated from the public captions YouTube serves with the video. The transcript has 1,327 words across 173 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.