REFINED MECH MODEL - 80% Winrate IFVG Strategy — Transcript
Full transcript
- 0:00Yo, how's it going everyone? Welcome
- 0:02back to another video. In today's video,
- 0:04I'm going to give a full breakdown of
- 0:06how to utilize the mech model. We're
- 0:08going to jump right into the checklist,
- 0:10the bias, key levels, draws on
- 0:11liquidity, and the traditional entry
- 0:14trigger you should look for when trading
- 0:15the mech model. We're also going to jump
- 0:17into how I have adapted and refined the
- 0:20mech model. I'm going to introduce you
- 0:21guys to my own discretion, my own
- 0:23criteria, and how I'm able to increase
- 0:25the win rate and probabilities of the
- 0:27way I utilize mech models. So yeah,
- 0:30without further ado, there's a lot to
- 0:31cover in this video. If you guys do want
- 0:33to support me, feel free to use code
- 0:35token at firms and sub to this YT. With
- 0:38that being said, let's jump right into
- 0:40our bias and key levels. So the first
- 0:42thing I want you guys to identify in the
- 0:44mech model is your bias, right? Although
- 0:46it is not required to identify high time
- 0:48frame bias, it is very ideal. So the two
- 0:51things I want you guys to ask yourself
- 0:52when identifying a high time frame bias
- 0:55is are we delivering from buy side
- 0:58liquidity or sellside liquidity and also
- 1:00are we disrespecting or respecting for
- 1:04value gaps. So this is very simple
- 1:06although it does seem a little bit
- 1:08difficult a little bit complicated.
- 1:10We're going to break this down right
- 1:11now. So by utilizing these two simple
- 1:13steps, what I also want to identify is
- 1:16in order to make my bias and key levels,
- 1:18I ideally want to be on the 4 hour or 1
- 1:20hour chart. I've just found the most
- 1:22success in aligning myself with the high
- 1:24time frame bias and identifying using
- 1:26these two simple criterias and actually
- 1:28aligning myself with the markets. With
- 1:30that being said, let's actually draw out
- 1:32an example. So let's say we are in a
- 1:34market maker sell model. So let's say
- 1:36price was delivering up higher and then
- 1:38we just hit a new high time frame
- 1:40liquidity pool. So we're hitting high
- 1:42time frame buy side liquidity right here
- 1:44and we're also reacting out of a 1h hour
- 1:47gap. So what you want to ask yourself is
- 1:49what type of structure will we generate?
- 1:51So if we are going to be bearish, we
- 1:53will tap a high time frame liquidity
- 1:55pool and a high time frame gap and then
- 1:57we'll start displacing out of this
- 1:59range. Now this is the typical market
- 2:01maker sell model. This is the typical
- 2:03structure that you will see in price.
- 2:05You'll also see market maker buy models
- 2:07when we start reversing. But by
- 2:09utilizing this example, I want you guys
- 2:11to ask yourself now using these two
- 2:12questions. Are we delivering from
- 2:14buyside liquidity or sellside liquidity?
- 2:17Well, in this trade, we are currently
- 2:19delivering from high time frame buyside
- 2:21liquidity and we're reacting out of a
- 2:23high time frame gap for us then to
- 2:25deliver lower to target sellside
- 2:27liquidity. So this is already giving you
- 2:30the narrative and high time frame bias
- 2:32that we are going to be bearish that we
- 2:34are going to be delivered lower. Now the
- 2:37next question I want you guys to ask
- 2:38yourself is are we disrespecting or
- 2:40respecting for value gaps. So right now
- 2:43we are respecting this bearish high time
- 2:45frame for value gap. Now looking at this
- 2:47current price leg what you will notice
- 2:49is on the left side of the market maker
- 2:52sell model. So on the left side of the
- 2:53curve where we were expanding all the
- 2:56way up until this high time frame gap,
- 2:58you will see that we generate a lot of
- 3:00bullish high uh bullish low time frame
- 3:02for valley apps and high time frame for
- 3:04valley apps. And what you will notice is
- 3:06if we are truly bearish if the high time
- 3:08frame bias is bearish. What we will do
- 3:11is we will disrespect bullish for value
- 3:14gaps on the left side of the curve while
- 3:16respecting bearish gaps on the right
- 3:18side of the curve. So every time we are
- 3:21displacing lower, we will generate
- 3:23bearish for value gaps and we will
- 3:25respect price to continue distributing
- 3:27it towards those sellside draws. Now
- 3:30going into a chart example, let's
- 3:32utilize our two criterias in order to
- 3:35identify what type of high time frame
- 3:36bias we actually have in price. So first
- 3:39I want you guys to ask yourself, are we
- 3:41delivering from buy side or sellside
- 3:43liquidity? Well, looking at current
- 3:45price action, you can see the current
- 3:47leg just distributed lower. So, already
- 3:50my eye draws to having a bearish bias.
- 3:52So, let's now confirm it by using these
- 3:54two steps. So, looking at the current
- 3:57leg that we are trading off of, you will
- 3:59see that we just swept out buy side
- 4:01liquidity. Now, we are currently
- 4:03delivering from buy side. So, this is
- 4:05already telling me that we want to
- 4:06target sellside draws. And looking at
- 4:09this current leg right here, we have an
- 4:11abundance of sellside liquidity below.
- 4:13You can see all of these high time frame
- 4:15swings that we can mark out and there's
- 4:17an abundance of liquidity lower. So,
- 4:20this is already drawing my eye towards
- 4:22holding a bearish bias. Now, you want to
- 4:24ask yourself, are we disrespecting
- 4:26versus respecting gaps, right? So,
- 4:28looking at what we just traded off of,
- 4:30we are inside of a 4hour bearish for
- 4:33value gap and price is currently
- 4:34respecting this 4hour gap to distribute
- 4:37us lower in price. Now looking at the
- 4:40left side, right? So splitting it like I
- 4:42did in that trade example that we just
- 4:44did in that diagram, you will now see
- 4:46that we are disrespecting bullish gaps
- 4:49while respecting that bearish gap. So if
- 4:51I mark out all of these bullish gaps,
- 4:53you can see that price runs through
- 4:55them. We disrespect them on the right
- 4:57side of the curve. Now, if I continue to
- 4:59play out price, we also have a 4hour
- 5:02bearish gap. So, if we are truly going
- 5:04to be bearish, I want to take a trade
- 5:07off of this 4hour gap in order to target
- 5:09the draws on liquidity lower. So, if we
- 5:12continue to play out price, you guys can
- 5:14see that we do trade up a little bit
- 5:15higher, but then we are still respecting
- 5:17this 4hour gap. And overall in price,
- 5:20what do you notice? Well, we distribute
- 5:21all the way lower. We're respecting this
- 5:234hour gap off of this 4hour manipulation
- 5:26right here. and we're continuing to
- 5:28target sellside liquidity and we're
- 5:31still holding a bearish bias. Now,
- 5:33revisiting the two-step criteria we want
- 5:35to use, let's actually identify, are we
- 5:37delivering from high time frame buy side
- 5:39or sellside liquidity? Well, currently
- 5:42you guys can see that price delivered
- 5:44from buyside liquidity. We swept out
- 5:46this buy side and are we disrespecting
- 5:48versus respecting? Currently in price,
- 5:50we respected bearish gaps. We are still
- 5:53currently respecting bearish gaps while
- 5:55disrespecting bullish gaps on the left
- 5:57side of the curve while actively
- 5:59targeting sellside. So this is the
- 6:01easiest and most simple way to identify
- 6:03bias. In this case, this is going to be
- 6:06a bias being bearish on the high time
- 6:08frame. Now going back to our criteria
- 6:10for mech models, the next step we have
- 6:12to identify is the key level we are
- 6:14trading off of. The main two ways in
- 6:17order to identify this is unmitigated
- 6:19for value gaps on the 5minut time frame
- 6:21or higher and internal highs and
- 6:23internal lows that are on the 5 minutes
- 6:25time frame or higher. If you combine
- 6:27both you will see a higher win rate
- 6:29percentage. Now understanding this you
- 6:32can also take either one of these
- 6:33dependent on the drawn liquidity how
- 6:35strong the do actually is and based on
- 6:38liquidity that we sweep. You'll see this
- 6:40later on in this video. Now let's
- 6:42actually hop into the diagrams on the
- 6:44right hand side. In the first chart
- 6:46example, this is a very traditional mech
- 6:48model setup. You will see let's say we
- 6:50are high time frame bullish. You'll see
- 6:52on the low time frame that we generate
- 6:54bearish structure. We generate buyside
- 6:56swing highs and then we'll take a low
- 6:59time frame reversal in order to target
- 7:01the liquidity above. Now what I want you
- 7:04guys to ask yourself is what key level
- 7:06we are trading off of. Now looking at
- 7:07this trade example, you can see that we
- 7:09trade into this high time frame for
- 7:11Valley Gap right here, which checks off
- 7:13the key level that we are in and we also
- 7:16sweep out a major internal low. So this
- 7:18is a very valid mech model to take. You
- 7:21can typically take this for a 1:1 RR or
- 7:23take it to the next drawn liquidity,
- 7:25which we will cover later on, but this
- 7:28is how you check off key levels, right?
- 7:30We're reacting out of an unmitigated for
- 7:31value gap and we're also reacting out of
- 7:34an internal low right here which gives
- 7:36us a strong enough reaction in order to
- 7:38take this trade. Now looking at the
- 7:40second diagram you can see that we trade
- 7:42into a high time frame for value gap.
- 7:44This would be a bearish high time frame
- 7:45gap and we also sweep out buyside
- 7:48internal highs a buyside liquidity pool
- 7:51and if we get a reaction we can target
- 7:53the next and easiest draw on liquidity.
- 7:56Now what I want you guys to note is when
- 7:58you are identifying your key level if we
- 8:00have an internal low. So let's say in
- 8:02this first diagram if the internal low
- 8:04is in this high time frame for value gap
- 8:07you have to see this um internal low
- 8:09actually get swept before taking your
- 8:11mech model because if you take a mech
- 8:13model right here and you see us tap into
- 8:15this high time frame for value gap but
- 8:17we didn't sweep out this internal
- 8:18liquidity pool. What you will see is
- 8:21nine times out of 10 we will actually
- 8:23re- sweep your stop and then continue
- 8:25the trend higher which is not what you
- 8:27want to see. So if we have an internal
- 8:29low in the high time frame gap you want
- 8:31to see it get swept before taking the
- 8:33mech model. And vice versa in this
- 8:36second diagram if the internal high is
- 8:38inside of this high time frame gap you
- 8:40want to see us actually sweep this
- 8:42before taking your mech model towards
- 8:44those draws on liquidity. The next
- 8:47important step that we have to use in
- 8:49the mech model is identifying the
- 8:51highest probable draws on liquidity. And
- 8:53this is applicable not only to the mech
- 8:56model. I use it in my refined mech
- 8:58model. I use it in PO3. Draws on
- 9:00liquidity should be a base on everything
- 9:02you do, all the ways you trade. And you
- 9:04should be prioritizing it because it
- 9:06gives you the best take-profit. It gives
- 9:08you the highest probable edge because
- 9:10all of the markets want to lead towards
- 9:12these draws on liquidity. So, let's also
- 9:14make a best draws on liquidity list. And
- 9:17I'm going to run through what I actually
- 9:19personally want to see. The highest
- 9:21probable draws on liquidity I mainly
- 9:22target going into each session. So, the
- 9:25first one is new week opening gap and
- 9:27new day opening gap. This one doesn't
- 9:29happen too often, but if it does, it's
- 9:31genuinely like a 99% win rate. The
- 9:34markets will retrace and you should
- 9:35almost always target new week opening
- 9:37gap and new day opening gap. Now what
- 9:40that is is on Sunday open we will either
- 9:42gap down or gap up and this is typically
- 9:44based on news drivers where the markets
- 9:46are self- adjusting itself and what we
- 9:48will do is generate an unfilled gap and
- 9:51what you want to do going into the
- 9:52session is targeting the fill of this
- 9:55gap taking a MAC model and taking a
- 9:57trade targeting these gaps new day
- 9:59opening gap happens on a weekday
- 10:01normally on Monday open let's say for
- 10:04example Wednesday open and it's
- 10:05typically smaller than new week opening
- 10:07gap but it still holds the same
- 10:09significance and the markets always want
- 10:11to target these gap fills because these
- 10:13are voids in price. Now the next one is
- 10:16equal highs and equal lows. I typically
- 10:18identify this on the five minute time
- 10:20frame or higher. Now what does that look
- 10:22like? Right? So let's draw a trade
- 10:24example. Let's utilize this one right
- 10:25here. So let's say we are taking a mech
- 10:28model to target buyside liquidity. What
- 10:30you want to see is if we actually
- 10:32generate equal highs. This is one of the
- 10:34best ways to actually increase the
- 10:36probability of your trade if you're
- 10:38given the entry trigger which we will
- 10:40cover on later on. So equal highs is the
- 10:42second best thing I look for. The next
- 10:44thing is data news and wick driver. So
- 10:47if this is if we print out a heavy wick,
- 10:49I will typically target it based on a
- 10:51mech model or PO3. And this is the third
- 10:54best thing and the best do to actually
- 10:56target because this is driven a lot of
- 10:58liquidity in price and you want to be
- 11:00targeting this if it is given in the
- 11:02session. The next thing and the most
- 11:04applicable thing that you will see in
- 11:06every single trade, almost every single
- 11:08trade I take is LRLR, low resistance
- 11:11liquidity runs. And what that is, right,
- 11:13so in this trade example, if we generate
- 11:15an internal high, what I almost want to
- 11:17see is for us to then generate failure
- 11:19swings and then taking a mech model that
- 11:22targets all of this low resistance
- 11:24liquidity. The easiest way to identify
- 11:26low resistance liquidity is ask
- 11:28yourself, is there a lot of wicks
- 11:29generated in price? And is the liquidity
- 11:32slanted? Is it trend line liquidity? Is
- 11:35it liquidity that is easily seen, easily
- 11:37targeted? And this is one of the main
- 11:39ways I capitalize off of getting a
- 11:41profitable edge is using low resistance
- 11:44liquidity. The next one is internal
- 11:46highs and internal lows, which we
- 11:48already covered in this trade example on
- 11:50the right hand side of the diagram. It's
- 11:52by targeting these internal highs.
- 11:54Typically, I like doing it when it's
- 11:55rested inside of a gap, but these are
- 11:58also a very strong drawn liquidity to
- 12:00target. The next one is unmitigated for
- 12:02value gaps that are 5 minutes or higher.
- 12:05So, even better is if we have a fivem
- 12:06minute unfilled gap and we're taking a
- 12:08mech model in order to target this
- 12:105minute unfilled. This just generates
- 12:13more probability in the markets because
- 12:15high time frame or unmititigated fair
- 12:17value apps are likely to get retraced
- 12:19into in price if the narrative is
- 12:21correct. Now, finally, what I want you
- 12:23guys to do is identify session
- 12:25liquidity. And the easiest way to do
- 12:27this is by using the KZP indicator. I
- 12:30have it at the bottom of my description.
- 12:32This will mark out the Asia highs, Asia
- 12:34lows, London highs, London lows. And I
- 12:36typically use this as a magnet in price.
- 12:39So in this trade example, if we had
- 12:40London high above us, normally I won't
- 12:43use it as a target. I'll use it as a
- 12:45magnet in price. And I'm going to write
- 12:46this down as well. And this is because
- 12:48typically price will normally edge these
- 12:50session liquidity runs, generate low
- 12:53resistance liquidity for another entry.
- 12:56So the easiest way and easiest and most
- 12:58simple way is by using it as a magnet.
- 13:00So if you wanted to take a mech model to
- 13:02target this internal high and you see
- 13:05London high above, this will add onto
- 13:08confidence in your trades and it will
- 13:09make you more confident actually taking
- 13:11the mech model towards that internal
- 13:13draw. Now the rule of thumb and the best
- 13:15way to utilize mech models is being a
- 13:17onetoone warrior, right? You should be
- 13:19going for a onetoone RR. This is the
- 13:22basic standard and you'll see in
- 13:23majority of all of my trades on YouTube
- 13:25as well, all of my trade recaps, it's
- 13:28ideally 1:1 or 1:22 RRS and I'm
- 13:30targeting lowhanging fruit because this
- 13:32increases the win rate of your mech
- 13:34model. It'll be like around 70 to 80%.
- 13:37Rather than targeting a 1:3, which
- 13:39significantly decreases your win rate
- 13:42because although the draws on liquidity
- 13:44are right, you never know what price
- 13:45wants to do. You never know when price
- 13:47will actually reverse. You want to be
- 13:49actually capitalizing off of high
- 13:51probability, aligning yourself with the
- 13:52correct narrative and then just taking
- 13:54your trade and letting the statistic
- 13:56play out. Now, now that we have covered
- 13:58the best draws on liquidity, let's
- 14:00actually cover the entry triggers used
- 14:02in the mech model to actually create the
- 14:05best probabilities in price. Now,
- 14:07finally, the last step of the mech
- 14:09model. After identifying our bias, the
- 14:11key level we are reacting off of and the
- 14:14draw and liquidity we want to target,
- 14:16now it all comes down to identifying our
- 14:18entry trigger. And in a traditional mech
- 14:21model, the easiest way to look at it is
- 14:23the highest time frame inversion that
- 14:25was created in the manipulation leg. So
- 14:28looking at this diagram again, let's say
- 14:30that we generated a drawn liquidity
- 14:32above, we generated an internal high and
- 14:34we traded into our key level. We hit an
- 14:37unmititigated for value gap and we swept
- 14:39out internal liquidity. Now we're
- 14:41getting a mech model entry. What you
- 14:43want to see is the manipulation leg that
- 14:45traded into this high time frame gap or
- 14:48the manipulation lag that swept out
- 14:50significant liquidity. You want to take
- 14:52the highest time frame inverse and take
- 14:54that trade in order to target the next
- 14:56draw in liquidity. So in this
- 14:58manipulation lag, let's say there was a
- 15:00one minute gap right here. Let's say
- 15:02there was a two-minute gap right here as
- 15:04well. And let's say there was a five
- 15:06minute gap right here. So looking at
- 15:08this mech model, what you have to do is
- 15:10actually wait for the five minute candle
- 15:12or five minute fair value gap to
- 15:14actually close before taking your trade
- 15:17to the next internal high. Now the
- 15:19reasoning behind this is it prevents you
- 15:21from getting re-swept and it prevents
- 15:23you from taking a low probability entry
- 15:25where we just close on the one minute
- 15:27and then you'll just get a re-swep and
- 15:28then continue higher. So that's why the
- 15:30traditional mech model waits for the
- 15:32highest time frame inversion. Now
- 15:34regarding your take-profit and
- 15:36stop-loss, what you will typically do is
- 15:38put your stop at the wick low and then
- 15:41target the next opposing draw in
- 15:42liquidity or go for a one:1 RR. But the
- 15:46overall traditional mech model, the
- 15:47easiest thing is the entry trigger,
- 15:49right? All you have to do is identify
- 15:51which is the highest time frame for
- 15:53value gap in the manipulation leg. Wait
- 15:55for that gap to get inverse, enter, and
- 15:58then just target the next opposing draw
- 16:00on liquidity. So now that we've broken
- 16:02down the mech model, what I want you to
- 16:04focus on is the bias, your key level
- 16:06that we react off of, the best draws on
- 16:08liquidity, and then just simply taking
- 16:10the highest time frame inverse. What I
- 16:13used to struggle in with mech models is
- 16:15having a criteria and what to look for
- 16:17first. So the best way and I came up
- 16:19with three things that you have to
- 16:20always ask yourself is did we sweep
- 16:22major liquidity? So in using this
- 16:24example right here, we sweep out major
- 16:26liquidity. Are we inside of a high time
- 16:28frame gap? Yes, we are. And are we
- 16:30targeting internal fair value gaps or
- 16:32good draws on liquidity? And in this
- 16:34case, we are. So the simplest and most
- 16:36easiest thing now is just to take the
- 16:38highest time frame inverse. Now, going
- 16:41into my refined mech model, what we're
- 16:43going to look at is how to take a trade
- 16:45without actually taking the highest time
- 16:47frame inverse because oftentimes when
- 16:49you wait for the highest time frame
- 16:51inversion, you'll get a very bad RRSQ.
- 16:54So, the 5m minute will potentially close
- 16:55right here. And now you have to drag
- 16:57your stop and target the major draw,
- 16:59which lowers the probability of your
- 17:01trades. I'm going to jump into my
- 17:03criteria on how to refine the MAC model,
- 17:06how to take low time frame discretional
- 17:08entries based on criteria in order to
- 17:10increase your win rate, increase the
- 17:12probability that you're entering at the
- 17:14perfect time, and capitalize easier on a
- 17:171:1 RR. Going on to my refined mech
- 17:20model. This is exactly how I avoid
- 17:22taking trades with the highest time
- 17:24frame inversion. And the reasoning
- 17:25behind this is because mech models are
- 17:27very reversal heavy. you're going from
- 17:29external to internal range liquidity. So
- 17:32when you're taking a reversal, when
- 17:34price in intraday is typically
- 17:36continuing, we're typically generating a
- 17:38PO3 structure in order to target going
- 17:40from internal to external. When you take
- 17:42a reversal in this range, the
- 17:44probability of it playing out decreases.
- 17:47So what I want to focus on is taking it
- 17:49when we actually generate the most
- 17:51probable draws on liquidity to take a
- 17:53reversal off of. And I base this off two
- 17:56scenarios and they rely heavily on what
- 17:58the high time frame gaps we are trading
- 18:00based into. So if we are trading in a
- 18:03one hour or four hour gap, I don't
- 18:05require a stop hunt. But if you see on
- 18:07the left hand side, the criteria for a
- 18:1015-minute and 30 minute gap tap is way
- 18:12more significant when it comes to taking
- 18:14a trade in the mech model. This both may
- 18:16sound confusing, but we're going to
- 18:18break this down. We're going to jump
- 18:19right into this. So the first thing I
- 18:21want to look for when taking a trade
- 18:23without the highest time frame inverse
- 18:25is if we are in expansion. And the
- 18:27easiest way to identify this is if we
- 18:29generate unfilled five-minute gaps.
- 18:31Typically I want to look for two to
- 18:33three in order to take my mech model
- 18:35trade. Then the criteria to take this
- 18:38refined mech model is identifying the
- 18:40high time frame gap we're trading into.
- 18:42I want us to trade into a 15-inut or 30
- 18:44minute gap. What I want to see first is
- 18:46the markets will trade into this gap. We
- 18:49will then generate low resistance
- 18:50liquidity. In this case, failure swings
- 18:52to the sell side. We'll then trade again
- 18:55into this 15-minute gap, generating an
- 18:57internal stop hunt, an internal sweep of
- 19:00this high. The high that was traded into
- 19:02this 15-minute gap, an optional and the
- 19:04best thing is if we have a low time
- 19:06frame SMT right here. And then I'm
- 19:08simply just taking the one minute
- 19:10inverse. So, all of this criteria is
- 19:12genuinely a 15-minute gap tap, a one
- 19:14minute inversion, and I'm just targeting
- 19:16LR. And then the first 5minute gap that
- 19:19I see on this trading leg, right? So it
- 19:21would be this 5minute gap right here.
- 19:23And I'm going for a 1:1 RR. Typically
- 19:26when this happens, when this criteria is
- 19:28fulfilled in price, we usually run to
- 19:30the second or third or even completely
- 19:32reverse in price. Because you're
- 19:34understanding that we're running out of
- 19:35fuel, we've already expanded in price.
- 19:38We then generate failure swings. We then
- 19:40get remanipulation and now we're
- 19:41expecting bearish arrays in this case to
- 19:44send price lower. So this is my criteria
- 19:47when it comes to trading into a
- 19:4815-minute or 30 minute gap. Now when I
- 19:51see us actually trading into a 1 hour or
- 19:534 hour gap, what I always prioritize is
- 19:56a stop hunt is not needed because this
- 19:58gap is heavily protected. It's the
- 20:00highest time frame manipulation. So all
- 20:03you're looking for is a one minute
- 20:04inversion and targeting the fiveminute
- 20:06unfilled. Obviously you have to align
- 20:09this with narrative, right? You have to
- 20:10make sure that price is ready to
- 20:12distribute. Both assets are correlated.
- 20:14But the overall criteria and entry
- 20:16trigger is what I want to see is low
- 20:18resistance liquidity right here. I want
- 20:20to see us having a one minute inversion
- 20:23clear displacement trading out of this 1
- 20:26hour or 4hour gap. And this is how I
- 20:28frame and avoid the highest time frame
- 20:30inverse. And this is honestly how I
- 20:32capitalize off MEX because I'm not a fan
- 20:35of taking the highest time frame inverse
- 20:37because I'll typically miss the move and
- 20:39the 5minut close will happen here and
- 20:41then I'll take the trade on the 5minute
- 20:43close and then will reverse in price or
- 20:45stop me out before running lower. So if
- 20:47you understand how to actually take low
- 20:49time frame entries, understand when your
- 20:51stop-loss is protected, you can
- 20:53capitalize off of using these two
- 20:54scenarios. And this is how I utilize my
- 20:57refined mech model. Now, we're going to
- 20:58jump into some trade examples in order
- 21:01to showcase this live in the markets and
- 21:03for you guys to actually see that this
- 21:04does work live in the charts. So, going
- 21:07on to our first trade example, we're
- 21:09still applying everything we've learned
- 21:10from the MAC model. The only difference
- 21:12is our criteria and entry trigger. So,
- 21:15the first thing we have to identify is
- 21:17our bias. So, what are we doing
- 21:19currently in price? Easiest and most
- 21:21simple way is what are we sweeping and
- 21:23what are we delivering from? What did we
- 21:25just do? We swept out major sellside
- 21:27liquidity and now we're currently
- 21:28delivering from sellside and targeting
- 21:30buyside liquidity above. You can see
- 21:33already price has been rapidly expanding
- 21:35higher. So already I want to hold a
- 21:38bullish bias. Now marking out these
- 21:40bearish PDAs, you guys can see that with
- 21:42these bearish gaps right here, we're
- 21:44currently inversing these bearish gaps.
- 21:46We're currently respecting bullish
- 21:47arrays and we're being sent higher in
- 21:50price. It's even more abundant when we
- 21:51scale down to the lower time frames and
- 21:53actually look at what price is doing.
- 21:55Now, scaling down onto the 15-minute
- 21:58chart, we want to identify if we have
- 21:59high time frame manipulation. Now,
- 22:02looking at this current price action
- 22:03right here, you guys can see that we
- 22:05just traded into a 15minute bearish for
- 22:08gap. So, we could potentially take a
- 22:09mech model in order to catch a
- 22:12retracement in price because although
- 22:14the high time frame bias is bullish,
- 22:16what is the mech model very good at? is
- 22:18very good at reversals. So, we can take
- 22:21a reversal catching a retracement and
- 22:23targeting any internal gaps inside of
- 22:25this expansion leg. So, now using the
- 22:28criteria in order to not take the
- 22:30highest time frame inverse, let's now
- 22:32hop onto the 5-minute chart and spot any
- 22:34unfilled gaps we have. I want to see at
- 22:36least in this expansion leg to have two
- 22:39to three gaps. Looking at price right
- 22:41now, you guys can see that we have one
- 22:42unfilled five-minute gap right here and
- 22:44another unfilled fivem minute gap right
- 22:46here. So this criteria checks out that
- 22:49price has been rapidly expanding with
- 22:51zero retracements. So a reversal would
- 22:54be due. A mech model would be very high
- 22:56probability if we're given the correct
- 22:58entry triggers. Now hopping onto the one
- 23:00minute time frame. What do you actually
- 23:02notice in price? Let me also drag this
- 23:04criteria right here. What do we see in
- 23:06price? Right. Well, if we trade into a
- 23:0815-minute gap, we want to see a stop
- 23:11hunt getting taken place. So you can see
- 23:13that we trade into this 15-minute gap.
- 23:15We then get a remmanipulation. We get an
- 23:17internal sweep of the high. We also
- 23:19generated a low time frame SMT with ES
- 23:22during the time of this trade. So now we
- 23:25have a low time frame SMT. So this is an
- 23:27optional thing, but it is checked off.
- 23:29We then have a stop hunt right here with
- 23:32an internal sweep into that 15-minute
- 23:34gap. So now all we want to see is a
- 23:36strong displacement candle with that one
- 23:38minute inverse in order to confirm that
- 23:40price is ready to deliver lower and this
- 23:43mech model is valid. If we identify this
- 23:45trading leg right here, you can also see
- 23:47that we generate low resistance
- 23:49liquidity leading up to this five-minute
- 23:52gap, which makes this trade even more
- 23:54high probability. So, if we just
- 23:56identify our entry trigger right here,
- 23:58we have a one minute fair value gap
- 24:00right here that does get inversed. We
- 24:02then get a heavy displacement closure
- 24:04below. We have a low time frame SMT
- 24:06internal sweep of the high. We can now
- 24:08target the first unfilled fivem minute
- 24:11gap with LRLR leading up to that gap. So
- 24:14if we took our entry right here, taking
- 24:16it for a one to one RR. You can see how
- 24:18easy it is to get a 1:1 in this trade,
- 24:21we can genuinely just target the first
- 24:23and the first unfilled 5m minute with
- 24:25low resistance liquidity leading up to
- 24:27it. If I just play out price, you can
- 24:29see that we just expand lower, heavily
- 24:31lower. So, because we did not take the
- 24:33highest inverse, we're able to
- 24:35capitalize easier on an um on a low time
- 24:38frame one to one catching that one
- 24:40minute inverse. Understanding that this
- 24:42is now high resistance based on that low
- 24:45time frame SMT based on us sweeping out
- 24:47internal range and trading into that
- 24:49high time frame gap, we are ready to
- 24:51distribute lower and catch a
- 24:52retracement. Now taking this same trade
- 24:55example, if we enter using the
- 24:57traditional MAC model of waiting for the
- 24:59highest time frame inverse of this fivem
- 25:01minute close, you can see if I play out
- 25:03price, we don't even enter a lot in
- 25:06profits and price starts reversing. And
- 25:08the reasoning behind this is because
- 25:10sometimes the mech model lacks the
- 25:12retracement or the reversal factor.
- 25:15Because if you're taking a trade that is
- 25:16not aligned with high time frame bias
- 25:18and you still want to capitalize off of
- 25:20taking consistent mechs, you have to
- 25:23rely on better low time frame structure,
- 25:25you have to get a better low time frame
- 25:26entry because if you take a five minute
- 25:29close like this, the retracement already
- 25:31happened and you're not really taking a
- 25:33reversal in this mech model. You want to
- 25:35emphasize taking a low time frame entry
- 25:38because when you wait for a fivem minute
- 25:39close like that or a 4-minute close a
- 25:41three minute close the RR is extremely
- 25:44skewed. In order to get a one to one RR
- 25:47you're essentially asking the market to
- 25:49completely reverse on the midtime frame
- 25:51and high time frame which is extremely
- 25:53unlikely. So once you understand that
- 25:55the low time frame and when you identify
- 25:57that it is high resistance based on this
- 26:00criteria, you're easily able to
- 26:02capitalize off that mech model reversal,
- 26:05catching that retracement and easily
- 26:07getting a one:1 RR. Now going on to our
- 26:10second scenario of taking a refined mech
- 26:12model trade without the highest time
- 26:14frame inverse. What I want to first
- 26:16identify is our bias. Right? This is
- 26:18what we're going to do with all mech
- 26:20models. We have to identify our bias
- 26:22then our key level to fulfill our
- 26:24criteria. So looking at our bias right
- 26:27now the easiest way to determine if we
- 26:29are bullish or bearish is honestly if
- 26:31you take a step back and look at the
- 26:33chart right now we can see that we are
- 26:35extremely bearish. We're distributing
- 26:37lower. So already I want to hold the
- 26:39high time frame narrative that we are
- 26:41going to continue this bearish trend.
- 26:43Now how do we justify this right is by
- 26:45asking those two questions. So first are
- 26:48we delivering from buyside liquidity or
- 26:50sellside liquidity? Right now we are
- 26:52delivering from buyside liquidity. You
- 26:54can see we sweep out this major high and
- 26:56then price is continuing to expand
- 26:58lower. We sweep out buy side liquidity
- 27:00and we're remaining in a bearish
- 27:02sentiment. Sweeping out buy side
- 27:04targeting sellside liquidity. The second
- 27:06thing is are we respecting or
- 27:08disrespecting gaps? Right now you can
- 27:11see that we are respecting bearish
- 27:12arrays. We trade into this bearish gap.
- 27:14We then displace lower. We trade into a
- 27:16new bearish gap. We displace lower.
- 27:19We're continuously making new 4hour
- 27:21bearish gaps. And then we're
- 27:22distributing lower in price. If we mark
- 27:25out our bullish gaps, you can see we
- 27:27make a bullish gap here. It gets
- 27:28inverse. We trade lower. We make a
- 27:30bullish gap right here. It gets
- 27:32disrespected. So right now we're
- 27:34respecting bearish, disrespecting
- 27:36bullish, confirming the idea that our
- 27:38high time frame is bearish. Now that
- 27:40we've fulfilled our bias, we want to
- 27:42look at the key level we trade off of.
- 27:44So by using our criteria of our refined
- 27:47mech model, what we want to see is a
- 27:494hour gap being targeted. Right now you
- 27:52can see that we're trading inside of a
- 27:544hour gap. So this fulfills the
- 27:56narrative that we can continue this high
- 27:58time frame trend. And if we get this one
- 28:00minute inversion, this also solidifies
- 28:02the idea that we're taking a reversal
- 28:04because with this one minute inversion,
- 28:06we're going to take a short to continue
- 28:08this high time frame trend. So now we
- 28:10want to go onto the low time frame to
- 28:12identify if we have an inversion in
- 28:14price. Now going on to the one minute
- 28:17time frame and looking at our criteria
- 28:18as well. You can see that at market open
- 28:21at 9:30 we then expand higher trading
- 28:24into that 4hour gap. And right now we're
- 28:26given the one minute entry trigger of
- 28:29continuing that bearish sentiment on the
- 28:31high time frame. This is very easy to
- 28:33continue a trend, continue a reversal
- 28:36and get a onetoone because we just
- 28:38expanded higher. We generated a very
- 28:40easy break even point as well. So
- 28:42capitalizing off this inversion if we
- 28:45continue to play out price. You can see
- 28:47that we do distribute lower getting that
- 28:49one to one RR with taking 4hour for
- 28:52value gap trades a stop hunt is not
- 28:54needed. You can see in the previous
- 28:55trade I emphasized getting a rewe but
- 28:58since we're trading inside of a 4hour
- 29:00high time frame for value gap it holds
- 29:02way more significance for price to
- 29:04actually reverse and run off without a
- 29:07stop hunt needed. But in all in all mech
- 29:10models and all refined mech models, I do
- 29:12suggest targeting a one to one RR. But
- 29:14if we actually play out price in this
- 29:16trade, you can see that we actually
- 29:18reverse in price and we do take the
- 29:20range low. So in this overall criteria
- 29:22of the refined mech model, I want to see
- 29:25strong displacement in this inversion
- 29:27and then a really good reaction out of
- 29:29that 4hour gap which we get and we also
- 29:31get a really clean break even point. You
- 29:34can also see that with this inversion
- 29:35marked out, we run up. We respect this
- 29:37inversion and then we're continuing to
- 29:39distribute lower. You can see that this
- 29:41ends up reversing in price. We take out
- 29:43the range low and we're continuing the
- 29:45high time frame trend. And yeah, I hope
- 29:47you guys enjoyed this video. This is a
- 29:49full breakdown of my own refined mech
- 29:51model and how I avoid taking the highest
- 29:53time frame inverse when the conditions
- 29:55are not presenting itself. I hope you
- 29:57guys learned a lot from this video. This
- 29:59was a long time in the making. If you
- 30:01guys do support my content and if you
- 30:03learned a lot, feel free to also like,
- 30:05comment, and sub. Use code token at
- 30:07proprops. I love you guys. I'll see you
- 30:09guys in the next video.
About this transcript
This page contains the full transcript of REFINED MECH MODEL - 80% Winrate IFVG Strategy by tokennq, generated from the public captions YouTube serves with the video. The transcript has 6,068 words across 848 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.