part 4 — Transcript

Full transcript

1. 0:00Okay. So for this one we need to capture
2. 0:03draw structures. We need to capture this
3. 0:05building. So
4. 0:07let's look for views that are not um
5. 0:10obstructed by three. So we can we can
6. 0:12try to uh pick this one and this this
7. 0:16should be good. This should be fine. So
8. 0:19first draw the base. So as much as
9. 0:22possible guys I would avoid um
10. 0:26excuse me. I would avoid using views
11. 0:28with birds eye view or top center view
12. 0:31but on this example we do not have
13. 0:35>> or we can just switch between the two.
14. 0:37Yeah.
15. 0:46Drag the wall
16. 0:50and draw the top [musika]
17. 0:54ayan.
18. 1:05So this guys for drawing building such
19. 1:07as this one uh uh I what I do is I put
20. 1:12assist line below
21. 1:15and then try to match it. If it match
22. 1:18then it's good. If it doesn't match I
23. 1:20will I will redraw
24. 1:23the my base again. So
25. 1:30>> So this should be good. Next
26. 1:33siya sa
27. 1:38>> hopefully we can see views that
28. 1:43it's too far off
29. 1:50kahit.
30. 1:56>> So again, let's
31. 1:58>> my drawing is too far off. I'm sorry
32. 2:00sir.
33. 2:02So if it's if your drawing is off guys,
34. 2:05you need to redraw it again.
35. 2:08>> You will have a hard time matching your
36. 2:11panels if
37. 2:14>> it's better toraw it early.
38. 2:25So again
39. 2:31>> align my baseamdam
40. 2:37pinak sa akin kahit wala namang
41. 2:39>> okay so let's check isipin
42. 2:43>> draw the top
43. 2:44>> pero may taga sa
44. 2:50So let's try drawing our panels.
45. 3:10>> So if it's wrong then you can adjust
46. 3:14move a little bit like so. Delete this
47. 3:16one. Make an assist or just draw another
48. 3:21panel. Ay sorry sir.
49. 3:26>> Delete the assist line and rejo your
50. 3:29panel.
51. 3:34unlike so
52. 3:38>> for this one
53. 3:41>> can just
54. 3:43make an assist line here
55. 3:47so it will serve as an anchor point for
56. 3:51all of our panels.
57. 3:56>> So same with this area right here.
58. 3:59Joan assist line
59. 4:04>> up to there
60. 4:07>> and
61. 4:09draw the remaining panels like so.
62. 4:14And lastly we will use the autofix tool
63. 4:17group and then use F4
64. 4:20and let's remove the
65. 4:26>> remaining. So let's check.
66. 4:34Okay. So I think you are done for this
67. 4:36red area right here. What is happening?
68. 4:39Why there is a red? Okay. We just need
69. 4:41to merge. And lastly,
70. 4:45add the corners.
71. 4:50na parang inaayos direksyon ng biahe
72. 4:52para hindi kami naging
73. 4:56tumatang
74. 4:57parang paik
75. 5:00at sana ang tagal po makin
76. 5:04hanggang sa po yung inas sa basa
77. 5:12at
78. 5:13>> for this one I'm not sure if we need to
79. 5:15add a corner because I'm not seeing any
80. 5:17depth in this area. So I think that
81. 5:19should be good group and then out R
82. 5:25>> and it should look like
83. 5:30at malapit
84. 5:31sa
85. 5:35git