part 2 hard building — Transcript

Full transcript

1. 0:00Okay. So hello everyone. For this
2. 0:03training video we will try to fix or to
3. 0:05capture this building. So for me this is
4. 0:08the most complicated building of the
5. 0:10whole um training exam. Okay. So if you
6. 0:13manage to capture this one, I think you
7. 0:15would be able to fix every building uh
8. 0:18on our training exam. Okay. So first is
9. 0:21we need to capture the
10. 0:24entire
11. 0:26the first I mean the main building.
12. 0:29Okay. So this one
13. 0:32like so.
14. 0:35So again
15. 0:48try to capture it from the longest or
16. 0:51the longest ridge or the longest part of
17. 0:53the building that you can see. So again
18. 0:57left is for drawing. Right is for
19. 0:59matching and adjustment.
20. 1:02Coper the wall. Okay. So, it does not
21. 1:04matter if you fix it left or right. No.
22. 1:06Okay. So, next is capture this part
23. 1:09guys. Since this whole area should be uh
24. 1:12one building only and it connected, so
25. 1:15this will be part of the building, but
26. 1:17we will change it to um attachment or
27. 1:21secondary independent attachment later.
28. 1:23Okay.
29. 1:25Capture this one
30. 1:27and use to adjust.
31. 1:33Again
32. 1:36so. Next is this one.
33. 1:44Just drag it.
34. 1:47Stand the Lil like that.
35. 1:51And use again use alt. Okay. So I think
36. 1:54we capture this perfectly. Okay. So we
37. 1:56do not need to use out anymore. Next is
38. 1:58this one. So use a I'm just using H to
39. 2:01connect. Okay. And then just using to
40. 2:04adjust
41. 2:07hold out.
42. 2:11And then we will just Okay. Again guys
43. 2:15always use the right image as reference.
44. 2:18Okay.
45. 2:21And lastly for this one,
46. 2:24so we will just extend our panel for
47. 2:26this one later on. Okay.
48. 2:33Make sure to draw at the base only.
49. 2:37So like so. Hold out.
50. 2:42Again, check your right as reference.
51. 2:44Use your right as reference.
52. 2:48One more
53. 2:52and insert like so
54. 2:55group and then use autofix F4.
55. 3:00Okay. So, as you can see this one
56. 3:01embedded itself to the main building.
57. 3:03Next is to capture our panels. So, we
58. 3:07need to make a ridge here first.
59. 3:13So, proceed to matching
60. 3:15like so.
61. 3:17Next is
62. 3:25So
63. 3:28okay.
64. 3:32So take note guys, your um
65. 3:36what you call this um assist line is
66. 3:38unlimited. So
67. 3:42it's okay for you to delete and then
68. 3:44withdraw again. So we're a bit short.
69. 3:55Okay. Next.
70. 4:09and close this one
71. 4:12and close this one. So we will use we
72. 4:14will use autofix for that later on. Next
73. 4:16is we need to capture the base for this
74. 4:19one. Okay. So,
75. 4:22we'll just use H
76. 4:29like so
77. 4:31and see if Yes, I think we captured it
78. 4:34properly.
79. 4:35Okay, so let's just do
80. 4:39like so.
81. 4:41And we can just just move that later.
82. 4:45Okay. Next is to capture the panels.
83. 4:54I think for let's try to drag this one.
84. 5:01Okay. So it's a bit long. If it try to
85. 5:02drag then this should be another panel.
86. 5:10Okay. So
87. 5:19it's a good
88. 5:24Okay. Okay.
89. 5:40draw it like so and then we will just
90. 5:42use autofix later. Okay. So let's try to
91. 5:44use auto fix to fix um okay forgot to
92. 5:48fix this one.
93. 5:55Proceed to matching.
94. 6:12Let's use autofix group and then use F4.
95. 6:23Okay. So we are done.
96. 6:28So let's continue with this part right
97. 6:31here. Okay. So let's check other first.
98. 6:38Again guys, you should avoid
99. 6:41using this type of views. Okay. Remember
100. 6:44to avoid bird ey view or top center top
101. 6:48center view.
102. 6:55Okay. So guys, this might look um Okay.
103. 7:00Okay.
104. 7:09Mmm.
105. 7:15Sky.
106. 7:18So this might look um it's not aligned
107. 7:21but if you try to move uh the the panel
108. 7:26see it will align. So because um it's
109. 7:30this one this is under this one. So it
110. 7:32might look that not um
111. 7:36ify to move this it will align. See?
112. 7:42So it gives you uh
113. 7:45impression that it's not um correctly
114. 7:48drawn but it's actually right correct.
115. 7:51So again
116. 7:54for this one.
117. 8:01Okay. So let's just let's just adjust.
118. 8:05So our um our assist line is embedded.
119. 8:10Fine. We will just use auto fix for that
120. 8:12one later.
121. 8:16So again broken lines it means that the
122. 8:18panel is inserted. Okay. Inserted to a
123. 8:22certain or the main building or another
124. 8:24building like so. So if you check the 3D
125. 8:27it's inserted. So we need to remove this
126. 8:29one later using autofix. Next is this
127. 8:32one.
128. 8:52Okay, for this one since Ay okay so
129. 8:56don't forget guys this part should be
130. 8:58captured as part of the building also
131. 9:01also. Okay, this one this balcony.
132. 9:20So we need to insert it a bit more like
133. 9:23so.
134. 9:27Again guys use the right as reference.
135. 9:29So
136. 9:30we can just cut this part out later
137. 9:33using autofix. So I think we are done.
138. 9:35Next is for this attachment. Okay. So
139. 9:41fast this way to draw an attachment is
140. 9:43using our assist line.
141. 9:50Okay. So this view is bug.
142. 9:57by this one.
143. 10:01So how to capture this one using our
144. 10:03assist line? First make an assist line
145. 10:06like so.
146. 10:09The bottom part
147. 10:19and capture it like so. Since we are
148. 10:23seeing pillars below.
149. 10:26Okay,
150. 10:28there are pillars below. So it okay so
151. 10:31again
152. 10:33this should be captured as
153. 10:36secondary independent. Okay. So let's
154. 10:39remove the assist lines. Let's see.
155. 10:43Let's check other views.
156. 10:46Let use auto fix first.
157. 10:54Let's check other views if it's correct.
158. 10:58So, okay. So, guys, I'm going to restart
159. 11:00my software first.
160. 11:02Okay. So, let's continue. Let's check
161. 11:05this one.
162. 11:10Okay. So, let's see if this view is
163. 11:13fixed.
164. 11:16Okay. So, we'll try to redraw our um
165. 11:19attachment again. So, first use an
166. 11:22assist line like so.
167. 11:27So, let's switch.
168. 11:50adjust
169. 11:55and captur
170. 11:59Okay. So,
171. 12:01yes, I think this is much better. Next
172. 12:04is for this one, guys. Since this is an
173. 12:08attachment also, um
174. 12:12we will just use this one as a guide.
175. 12:16just place an assist line and then from
176. 12:19here.
177. 12:23So from
178. 12:25I think it starts from here from the
179. 12:27base of the
180. 12:31can just also use an assist line
181. 12:34extended it inwards the main building.
182. 12:38Draw it like so.
183. 12:40And guys again don't forget for
184. 12:42attachments we need to remove the base.
185. 12:45Okay so let's select this one and then
186. 12:46press three.
187. 12:49Sorry I need to delete the whole base
188. 12:50for this building. Okay. And then let's
189. 12:53try to use autox.
190. 12:56Oh forgot the chim. So for the ch again
191. 13:01outside
192. 13:03the wall.
193. 13:06So you can just adjust later
194. 13:10like so.
195. 13:13And let's proceed to matching.
196. 13:20And then group
197. 13:22J. Select the main building to str ah to
198. 13:27fix uh what do you call this? To fix.
199. 13:33Okay. So to fix the wall fix. Okay. And
200. 13:38then lastly we will use the autofix
201. 13:41function.
202. 13:44And see we are done. So guys if you
203. 13:48manage to capture this building properly
204. 13:51I assure you that all remaining task
205. 13:54will be easy fix for you guys. So it
206. 13:57should look like this one. So let's use
207. 14:00out R
208. 14:08and see the whole building like so.
209. 14:11should look like this
210. 14:16guys. So
211. 14:19thanks. Thank you for watching.