YouTube2Text

OM642 (oil cooler leak fix 2) Intake throttle body/EGR return mixer removal — Transcript

by DIY Project Videos · 883 words · 191 segments · language en · Watch on YouTube

Full transcript

  1. 0:01all right next to be removed
  2. 0:04is this
  3. 0:06piece that goes from
  4. 0:09here
  5. 0:12all the way
  6. 0:14down here
  7. 0:16um there was a little tank
  8. 0:19on top of it here
  9. 0:22and attach this with three screws
  10. 0:28these
  11. 0:29three but I probably didn't need to
  12. 0:32remove it I only removed it to see how
  13. 0:35to unmount
  14. 0:37uh this thing so definitely
  15. 0:40take this bolt out
  16. 0:42and I'm going to go ahead and try to do
  17. 0:44that now
  18. 0:47um
  19. 0:49I'm also disconnect
  20. 0:52some of this wiring here so we have
  21. 0:56a cable here
  22. 0:58and we have one
  23. 1:00here
  24. 1:01and now we'll
  25. 1:04record some more stuff as I take it off
  26. 1:09so this piece is called the
  27. 1:12EGR cooler
  28. 1:15that bolts into the intakes here
  29. 1:18and besides these
  30. 1:22uh
  31. 1:25three bolts at top
  32. 1:28there are
  33. 1:32two more
  34. 1:35bolts that
  35. 1:38go in here
  36. 1:41that need to be removed
  37. 1:44in order to get to that I removed this
  38. 1:49uh
  39. 1:51intake hose this was easy this pulls out
  40. 1:53quite easily
  41. 1:56so
  42. 1:58I will loosen these bolts next
  43. 2:01on the wiring
  44. 2:04let's look at what's all attached we
  45. 2:06have this plug
  46. 2:08we have this plug this is two we have
  47. 2:11this plug that's three
  48. 2:13we have this plug that's four
  49. 2:16that I can see so far if there are more
  50. 2:19than
  51. 2:20I will note that later so I'm going to
  52. 2:22loosen these bolts and see if that's
  53. 2:25sufficient
  54. 2:27this hose here
  55. 2:30these simply push in and are held back
  56. 2:34from coming loose with this clip this
  57. 2:37clip is quite easy to remove
  58. 2:39after that the hose just pulls off
  59. 2:45so on this EGR cooler
  60. 2:49uh it's these bolts
  61. 2:52uh these bolts here that are kind of
  62. 2:56hard to get to at least the bottom one
  63. 3:01these
  64. 3:03top four bolts are easy to get off
  65. 3:06so they are at the corners
  66. 3:11of this uh
  67. 3:13plastic piece where the tube comes in so
  68. 3:16one right here
  69. 3:18and the one underneath
  70. 3:21it's hard to see and hard to get to
  71. 3:24but these two bolts along with those
  72. 3:28top four will get it loose
  73. 3:33so the the bolts that just came out here
  74. 3:36the
  75. 3:40slightly shorter one
  76. 3:44goes at uh
  77. 3:47the top there and there is actually
  78. 3:51one more
  79. 3:54bolts
  80. 3:56except bracket that also come on so we
  81. 3:58have
  82. 4:02four total up there one here and two
  83. 4:04down there
  84. 4:07so it says seven
  85. 4:10uh actually there are four here
  86. 4:14uh
  87. 4:17one there so that's
  88. 4:18yeah so we have seven
  89. 4:22to remove this
  90. 4:24okay the bolts for that pipe
  91. 4:28they're all the same size
  92. 4:32there's three of them
  93. 4:34um these clips they come off if you push
  94. 4:37on this and pull some of them are a
  95. 4:40little stuck
  96. 4:41now
  97. 4:43this cable here
  98. 4:46it plugs in here is actually held back
  99. 4:48by this
  100. 4:49bracket that's uh get that little tank
  101. 4:51attaches here
  102. 4:53so this actually needs to come off just
  103. 4:55too because this clip
  104. 4:59just won't go through
  105. 5:01so I'll have to temporarily remove this
  106. 5:03to remove that cable
  107. 5:07so on this there's actually one more
  108. 5:13wire here or plug that needs to be taken
  109. 5:17out on the back
  110. 5:19and uh the only difficulty
  111. 5:22was this piece was the uh
  112. 5:26this tube
  113. 5:28I found it to be
  114. 5:31jammed in there very badly very
  115. 5:34difficult to get out although this is
  116. 5:36supposed to come right out and I should
  117. 5:37have had to detach these three bolts
  118. 5:41this was very difficult to remove
  119. 5:45from the engine that ended up needing a
  120. 5:48crowbar to pry it out
  121. 5:51so the EGR cooler I've been calling it
  122. 5:54that because that's
  123. 5:56uh what
  124. 5:57[Music]
  125. 5:58I heard it called in another video this
  126. 6:01thing
  127. 6:04um it's out now
  128. 6:07we have
  129. 6:10significantly more more room in the
  130. 6:13front here now
  131. 6:16um
  132. 6:17this is that pipe that was hard to get
  133. 6:19off it doesn't look damaged
  134. 6:22it's supposed to just
  135. 6:26pop right off and pop right back on
  136. 6:31I don't know why it was so uh stuck in
  137. 6:33there
  138. 6:37but it's removed now
  139. 6:39I'm going to put these bolts back where
  140. 6:43they came from loosely
  141. 6:45so that it will be easier to reassemble
  142. 6:48later
  143. 6:49so in reverse order this one
  144. 6:53came from
  145. 6:56the bottom here
  146. 7:05no
  147. 7:06um
  148. 7:13I'm gonna put these bolts back where
  149. 7:16they came from
  150. 7:17so this seventh one here
  151. 7:21uh it was that
  152. 7:24came from this piece
  153. 7:26that actually
  154. 7:28holds bolts in here so that's the one
  155. 7:32that goes here
  156. 7:36then
  157. 7:38uh this one
  158. 7:42this uh longest one here
  159. 7:46go here
  160. 7:55and this guy
  161. 7:57here
  162. 8:01maybe it'd be best actually to leave
  163. 8:05to leave these out because this might
  164. 8:10um
  165. 8:12got bent or something while working on
  166. 8:15things
  167. 8:18so instead I'll
  168. 8:20put them in here
  169. 8:32this guy
  170. 8:35to go here
  171. 8:38oop
  172. 8:40no
  173. 9:12no
  174. 9:21so it's possible that this was stuck
  175. 9:23because of
  176. 9:25carbon buildup we see on this side
  177. 9:28is quite a bit building up in this tube
  178. 9:33this goes
  179. 9:35back on here like this so I'll put it
  180. 9:37back together after cleaning it off
  181. 9:42I took these uh
  182. 9:46these two volts
  183. 9:49so I'll clean this and clean this thing
  184. 9:51off and
  185. 9:52put it back together but we can see a
  186. 9:55build up
  187. 9:57in here as well
  188. 9:59going to uh scrape this and
  189. 10:03clean this thing as much as possible
  190. 10:07a lot of the oil from oil leak has
  191. 10:09spilled onto this piece

About this transcript

This page contains the full transcript of OM642 (oil cooler leak fix 2) Intake throttle body/EGR return mixer removal by DIY Project Videos, generated from the public captions YouTube serves with the video. The transcript has 883 words across 191 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.