✅NOMENCLATURA Química-HIDRÓXIDOS |Nombra hidróxidos FÁCIL y RÁPIDO💯 — Transcript
Full transcript
- 0:09Welcome to this chemistry video
- 0:11tutorial. This is the second part. Now
- 0:13we will look at and continue with
- 0:15chemical nomenclature. We have to look
- 0:18at inorganic chemistry. We already saw
- 0:20oxides, now we will see hydroxides.
- 0:23Very well. So, let's begin. Remember to
- 0:26subscribe. We are
- 0:27profesorparticularpuela.com. Okay. The
- 0:30first thing to do is define the concept
- 0:32. The concept by which a hydroxide is
- 0:36formed. Very well. The rule is as
- 0:39follows. To form a hydroxide, we need
- 0:42an element from the periodic table
- 0:47together with the OH radical. This OH
- 0:52radical is what gives us a hydroxide as
- 0:56such when formed. Now, the valence of
- 1:00the OH radical will always be negative
- 1:03with -1. Very well. It is worth
- 1:07mentioning that this radical is also
- 1:08known as the hydroxyl radical. Yes? So,
- 1:13to form a hydroxide, I simply need an
- 1:15element plus the OH radical with a
- 1:17valence of -1. And in this way, we form
- 1:20the hydroxide. Now that we have seen
- 1:24the concept, let's move on to the
- 1:26formulation. I will write the
- 1:30formulation here in large print, well,
- 1:33in this section. Very well, so we will
- 1:37start from simple formulas to form the
- 1:40hydroxide. For example, let's assume we
- 1:44have an element, in this case sodium,
- 1:47and we combine it with the OH radical.
- 1:52The first thing to know, remember, is
- 1:54the valence of each element. This works
- 1:56with -1 and sodium works with a valence
- 1:58, you have to check the valence tables,
- 2:00of one. Therefore, if we cross the
- 2:04valences, we end up forming Na OH.
- 2:11Since they change from one to one, it
- 2:14passes over here, the -1 over here, and
- 2:16they simply remain that way. Remember
- 2:18that when the valence is one, the
- 2:21number is not written; it is understood
- 2:24to be one. For example, let's try
- 2:27another one with copper and the radical
- 2:30. OH. So now we have our radical is -1
- 2:34and copper works with two valences. I
- 2:38am going to work with two valences. I
- 2:40will put it here. Copper works with a
- 2:42valence of one or a valence of two.
- 2:45Let's see both cases. If it is with
- 2:47valence one, crossing, yes, then
- 2:50crossing the valences would leave it
- 2:52like this. I will put it here. Copper
- 2:56and radical OH. If I place copper
- 2:58working with its other valence, we know
- 3:02here it is -1 and on this side the
- 3:04other copper valence is two. Crossing
- 3:08them would leave me with copper and the
- 3:12OH radical with a subscript of two. In
- 3:15this way. Very well, another
- 3:18formulation. Let's see it quickly so
- 3:21that this becomes very clear. For
- 3:24example, I am going to use bromine.
- 3:27Bromine with the OH radical. Now,
- 3:31bromine has several valencies to work
- 3:34with. In fact, it works with four
- 3:36valencies. They are valency 1, valency
- 3:393, valency 5, and valency 7. Therefore,
- 3:42this one will always be -1. And here I
- 3:44can have 1, 3, 5, 7. I am going to
- 3:47select valency 5 so I get the following
- 3:50. Crossing valencies, I would get BR,
- 3:54the OH radical, and a subscript of 5.
- 3:57There it is. I hope the formulation was
- 3:59understood. Next, I will move on to the
- 4:03nomenclature, whether it be traditional
- 4:06, Stock, or systematic. All right,
- 4:10let's erase this part. So, I am going
- 4:15to write some elements and we will
- 4:17start with the traditional form. Now,
- 4:20nomenclature. We will start with the
- 4:24traditional nomenclature. For
- 4:30traditional nomenclature, I remind you
- 4:32that you have to learn and know how to
- 4:34apply the table of prefixes and
- 4:36suffixes. Yes, I remind you that the
- 4:39table goes like this. hypo-ous, -ic,
- 4:44and finally per--ic. Where I place the
- 4:48hyphen is where the radical or the
- 4:49element I want to mention goes. We are
- 4:51going to see that part right now. Now,
- 4:54something more important about the
- 4:55table is differentiating which prefix I
- 4:57will use depending on the valency of
- 4:59the element, that is, the element that
- 5:00forms the hydroxide. So for valency one
- 5:03or a single valency, rather, we will
- 5:05see that there are elements that work
- 5:08with one, with two valencies. with
- 5:10three valencies, and up to four
- 5:11valencies. Therefore, the table will be
- 5:13changing. If it works with a single
- 5:15valency, watch out, this doesn't mean
- 5:17it works with valency one, but that it
- 5:19works with only one valency, it will
- 5:20use the-ic suffix. If I see that the
- 5:23element can work with two valencies, I
- 5:26use-ous and-ic. -ous for the lower one,
- 5:29-ic for the higher one. If it comes
- 5:31with three valencies. I formulate it
- 5:33this way. Hypo--ous for the lowest, -
- 5:36ous for the intermediate, and-ic for
- 5:38the highest. And if it finally works
- 5:41with four valencies, I will have to use
- 5:43the whole table. Hypo--ous for the
- 5:45smallest, -ous for the next one, -ic
- 5:48for the third, and per--ic for the
- 5:50largest of the valencies. That is to
- 5:53say, to know the name of the valency,
- 5:55or rather if it is lower or higher, I
- 5:57simply go down, right? To go toward the
- 6:00higher valency. All right, now this
- 6:03table will be useful to me. I am going
- 6:05to put the following elements. All
- 6:07right. We have, I am going to put them
- 6:11here, Na. I am also going to put the Cu
- 6:18(OH) 2. All right, it is formed in this
- 6:21way. I am going to add another element.
- 6:28Okay, this will be our Okay, our
- 6:30calcium. We are going to add magnesium.
- 6:36There it is. Very well. I am also going
- 6:39to add like this, we will simply start
- 6:45with these for traditional nomenclature
- 6:47. The formulas are already established.
- 6:52That is very good. Now we simply have
- 6:54to verify what our nomenclature will be
- 6:56. Now, what we identify is sodium.
- 7:00Sodium only works with one valence. Yes
- 7:03, sodium works only with valence one.
- 7:07Therefore, I go to the table and look
- 7:09at a single valence, not valence one,
- 7:11but why? Because it is only working
- 7:13with a single valence. So, the prefix-
- 7:15IC is used when there is a single
- 7:17valence. Very well. So, how do we do
- 7:21this? All of them in general are
- 7:23hydroxides. So, we are going to put
- 7:25hydroxide in this way. All of them will
- 7:29have hydroxide. And to apply the-ic
- 7:32suffix, we will have to make use of the
- 7:34other element of the radical. In this
- 7:36case, it is sodium. So, as it is sodium
- 7:39, it could be sodium hydroxide. Yes,
- 7:43sodium is the radical and the-ic ending
- 7:45is what I take from the table. Let's go
- 7:49to the next one. For calcium, we have
- 7:51to see how many valences it works with.
- 7:53Calcium works with a single valence,
- 7:55which is valence two. Yes, here it is,
- 7:58it is already crossed. Therefore, as it
- 8:00is also a hydroxide and we are talking
- 8:02about a hydroxide, it would be a
- 8:04hydroxide and as it works with a single
- 8:05valence, I use the same prefix-IC. So,
- 8:08as it is calcium, it would be calcium
- 8:11hydroxide. In this way. Then comes
- 8:16magnesium. Magnesium works with two
- 8:19valences, with valence one and valence
- 8:22two. And in fact, here we have it when
- 8:24it works with valence two and here we
- 8:26have it when it works with valence one,
- 8:28although it is not underlined, okay? So
- 8:30, what will this be? It was, in the
- 8:33same way, a hydroxide. And now, pay
- 8:36attention, as magnesium works with two
- 8:38valences, I can no longer use only this
- 8:39one, but I go now to this small bracket
- 8:41where it indicates that it works with
- 8:43two valences. -OUS for the lesser, -IC
- 8:46for the greater, as in this case it is
- 8:48working with the greater, yes? The
- 8:51hydroxide would be called magnesium
- 8:55hydroxide, the first one. Yes. And for
- 8:59the one below, which is working with
- 9:01the other valence, but it is the lesser
- 9:03one, it would be magnesous hydroxide or
- 9:15yes, magnesium, magnesous, magnous...No
- 9:17, I do not quite remember which is the
- 9:20one. In this case we are going to put
- 9:21it like this: magnous. I'm not sure if
- 9:23it's exactly the correct profile, okay?
- 9:25So, we just have to verify it. Now
- 9:28let's go. I am going to put other
- 9:32elements so that these elements are
- 9:34much more representative. I'm going to
- 9:37put the following. We are going to use
- 9:41what is iron. Uh, I already used iron,
- 9:45in fact. We are going to put it here in
- 9:48this way. We are going to use an
- 9:50element that works with three valences
- 9:52or with two or with four valences. for
- 9:56three valences. I have for example the
- 10:01here I have these elements, bromine,
- 10:03for example, bromine. Here it will work
- 10:06with several valences. This is the
- 10:09first, this is the second, this is the
- 10:16third. And we are going to work here
- 10:19with this one too, which is valence
- 10:22seven. Very well. Now we are going to
- 10:25proceed in the same way to verify what
- 10:27the correct names would be using
- 10:29traditional nomenclature. In this case
- 10:32I have my element which is iron. And
- 10:34iron in valence tables we see that it
- 10:36works with two valences, with valence
- 10:38two or with valence three. Therefore,
- 10:41since there are two valences, I use
- 10:43this key again. -ous for the lower, -ic
- 10:45for the higher. Which one does it work
- 10:47with? We see that it works with valence
- 10:49three, therefore it is the higher one.
- 10:50So, it corresponds to the-ic prefix
- 10:53following my key. So it would be
- 10:56hydroxide ferric. In this case, if it
- 11:02were working with valence two, it would
- 11:04be ferrous oxide, ferrous hydroxide.
- 11:06Now, we are going to see a case which
- 11:08is bromine that works with four
- 11:10valences. Bromine works with valence
- 11:14one, with valence 3, with valence 5 and
- 11:16with valence seven. And in that order
- 11:19we can use the table. Since there are
- 11:22four valences, I use the whole table,
- 11:24as it comes here, from the smallest to
- 11:26the largest. So, here bromine uses the
- 11:29smallest valence, which is one,
- 11:31therefore it would be a hydroxide. The
- 11:36prefix radical would be hypo-, the
- 11:38radical, the element and the-ous suffix
- 11:41. So, it would be hypobromous. Hypo-,
- 11:47it comes, hypo-bromous. They are all
- 11:50hydroxides, we must remember, okay?
- 11:52Let's assume they are all hydroxides.
- 11:55hydroxide for the next one which is
- 11:57with the valence number, let's see in
- 12:00order the second. So, it would only be
- 12:03the-ous suffix. Therefore, we would
- 12:06have to put bromous oxide. The next one
- 12:09would be and a hydroxide. Following the
- 12:12third would be bromic. And finally for
- 12:18the last one, which is the largest, the
- 12:20seventh, valence seven, I use the last
- 12:23prefix and suffix, perbromic hydroxide.
- 12:28This is how I manage to use the
- 12:29traditional nomenclature. It is very
- 12:32important to learn the table, as
- 12:33everything else is much easier based on
- 12:36that. Now let's erase this part. We
- 12:39have already seen the traditional
- 12:41nomenclature, so to speak. And now we
- 12:46are going to look at the two following
- 12:48nomenclatures, which are the simplest.
- 12:52The nomenclature, in this case I will
- 12:55put Stock and systematic here. Let's
- 13:00put some formulas to see how they would
- 13:02turn out. Very well. So, what would it
- 13:06be? I will put potassium with the
- 13:11radical, the OH, like this. Let's also
- 13:14add calcium. Let's add copper. What
- 13:24else shall we add? Let's go with one
- 13:27more that would be iodine. And I am
- 13:35going to work with the valence. Let's
- 13:37go to valence 5. There it is. So we
- 13:40hope this part about valence is very
- 13:42clear. The nomenclature. We have two
- 13:45others besides the traditional one,
- 13:46Stock and systematic. The Stock system
- 13:49in our case is the simplest; you just
- 13:51have to add, yes? What is it about? A
- 13:53hydroxide and the name of the element
- 13:56that accompanies it. For example, for
- 13:59the first one it would be potassium
- 14:02hydroxide, and the valence of the
- 14:04element accompanying the hydroxide is
- 14:06placed in parentheses in Roman numerals
- 14:09. In this case, potassium works with a
- 14:11valence of one, as we see, and I would
- 14:13put it like this. On this side, it
- 14:16would be a hydroxide. Okay. We missed
- 14:19adding a two on this side. There it is.
- 14:22On this side it would be calcium
- 14:24hydroxide; you don't have to use
- 14:26prefixes or suffixes or anything like
- 14:29that. And the valence that calcium is
- 14:31working with in this case is two. I put
- 14:32the two in Roman numerals. The next one
- 14:35would be copper hydroxide. And also
- 14:39including the valence with which the
- 14:41copper is working. Finally, the last
- 14:44one below would be iodine hydroxide,
- 14:47and place the valence with which the
- 14:49iodine is working in Roman numerals.
- 14:53There it is. Finally, the systematic.
- 14:56For the systematic approach, as we will
- 14:58see, it is also not that complicated.
- 15:02In this case, all we use are prefixes
- 15:05like di, tri, tetra, penta, hexa, hepta
- 15:09, etc., depending on the number of ions
- 15:12that accompany the hydroxide element.
- 15:18In this case, the hydroxide is only
- 15:22here as a single ion. So, we could call
- 15:27it hydroxide. Often they write
- 15:30potassium monohydroxide. Yes? So, when
- 15:35it has no valence, I assume it's one
- 15:38and I simply use the name hydroxide.
- 15:41Now, when it has a radical of two, the
- 15:43prefix is di, therefore it would be
- 15:48dihydroxide because there are two
- 15:51elements or two hydroxide ions, calcium
- 15:54dihydroxide. For this one I have two
- 16:00again, so it would be di. Well, copper
- 16:02works too, right? If it works with one,
- 16:04with two, okay, that's fine.
- 16:05Dihydroxide of copper; for iodine,
- 16:10which works with valence 5, it would be
- 16:13pentahydroxide. You just have to use
- 16:18the prefixes. Iodine pentahydroxide.
- 16:22There it is. Remember that the prefixes
- 16:25go mono, di, tri, tetra, penta, hexa,
- 16:28hepta, and so on. Very well. So, this
- 16:31is how we finish the video on hydroxide
- 16:34radicals. Amen.
About this transcript
This page contains the full transcript of ✅NOMENCLATURA Química-HIDRÓXIDOS |Nombra hidróxidos FÁCIL y RÁPIDO💯 by Profesor Particular Puebla, generated from the public captions YouTube serves with the video. The transcript has 2,340 words across 334 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.