YouTube2Text

My Thoughts on the Bambu Lab H3C After Using it for a Real Project — Transcript

by Clough42 · 6,054 words · 893 segments · language en · Watch on YouTube

Full transcript

  1. 0:00For the last 5 years, I've been working
  2. 0:01on a simple idea, an electronics
  3. 0:04enclosure with a numeric display and
  4. 0:06flexible buttons 3D printed using
  5. 0:08multiple materials in one shot in a
  6. 0:10single print job. In 2021, I bought a
  7. 0:14Prusa XL to try it, but after working
  8. 0:17with Prusa support for almost a year
  9. 0:18without success, I finally just gave up
  10. 0:20and sold it. I was hopeful when Bambu
  11. 0:23Lab released the H2C, but it couldn't do
  12. 0:25what I wanted either. Snapmaker even
  13. 0:28sent me a U1, and that machine turned
  14. 0:30out to be a disappointment that we'll
  15. 0:32talk about on another day, but this
  16. 0:34machine
  17. 0:35this machine finally pulled it off.
  18. 0:38>> [music]
  19. 0:41>> Welcome back to Cloud 42. I'm James.
  20. 0:44This is the H3C from Bambu Lab. This is
  21. 0:47finally the printer that I, and to be
  22. 0:49fair, a lot of other people have been
  23. 0:51asking them to make for a long time. For
  24. 0:55several years now, I've been asking them
  25. 0:56when they'll have a tool changer, and
  26. 0:58the answer has always been the same. Not
  27. 1:01this year. Well,
  28. 1:02>> [snorts]
  29. 1:03>> it's finally here, and not to bury the
  30. 1:05lead, it is freaking awesome. This is
  31. 1:08finally the machine that unlocks all of
  32. 1:10the crazy things that I personally want
  33. 1:12to do with a 3D printer.
  34. 1:18When I built my electronic lead screw, I
  35. 1:20used an off-the-shelf LED display with
  36. 1:22tactile buttons, and I machined and 3D
  37. 1:25printed an enclosure around it. But, in
  38. 1:28the back of my mind, I was thinking why
  39. 1:30couldn't the entire thing, including the
  40. 1:32display and the buttons, be 3D printed?
  41. 1:36Now, the obvious answer is because
  42. 1:38mixing all of the required materials in
  43. 1:40a single 3D print is hard. To do what I
  44. 1:43envisioned, I would need nine different
  45. 1:44materials. A rigid material for the
  46. 1:46frame, three different transparent
  47. 1:49materials for the displays, two flexible
  48. 1:51materials for the buttons, a conductive
  49. 1:53flexible material for the key contacts,
  50. 1:56and two different types of support
  51. 1:58material. One for the rigid, and one for
  52. 2:00the flex. Now, I did have some success
  53. 2:03printing just the displays on the A1
  54. 2:06Mini back in the day, but this machine
  55. 2:08can handle all nine materials in a
  56. 2:10single job. And
  57. 2:13here's the result. This calculator is
  58. 2:15just a proof of concept, but it was a
  59. 2:17good test bed to work through the
  60. 2:19challenges of mixing all of these
  61. 2:21different materials together. The
  62. 2:23printer can handle them all just fine,
  63. 2:24but physics is physics and the materials
  64. 2:27themselves have to coexist. They have to
  65. 2:29work in the same thermal print
  66. 2:31environment. They have to stick to the
  67. 2:32bed and each other when I want them to
  68. 2:34and release when I want them to. And
  69. 2:36there is definitely a learning curve to
  70. 2:39doing that. I'll do a full video on this
  71. 2:41project, but for now, let's open it up
  72. 2:43and I will show you the highlights.
  73. 2:47The black frame is printed in Bambu Lab
  74. 2:49PLA carbon fiber, and that also forms
  75. 2:53the partitions that keep the light from
  76. 2:55the individual display LEDs from
  77. 2:56spilling into neighboring segments.
  78. 2:59There's a single layer of white PLA
  79. 3:01basic down at the bottom of each light
  80. 3:03channel to act as a diffuser. Behind
  81. 3:06that, there are four layers of Polymaker
  82. 3:08Pan Chroma transparent red PLA to color
  83. 3:11the light. And over the entire front of
  84. 3:13the display, there are two layers of
  85. 3:15Toxen 3D transparent black PLA to hide
  86. 3:18the segments when they're not lit and
  87. 3:20increase the contrast. I also had a
  88. 3:23version of the display that used PETG,
  89. 3:25but I liked the red color of the Pan
  90. 3:27Chroma PLA better, so that's what I
  91. 3:30ended up using. The keys are printed in
  92. 3:32Bambu Lab TPU 75A.
  93. 3:35That's a new ultra-soft TPU that's being
  94. 3:37introduced with this printer, and we'll
  95. 3:39talk more about that in a little bit.
  96. 3:42The embedded labels on the keys are
  97. 3:43printed in Bambu Lab TPU 85A. Each key
  98. 3:47is supported on a thin flexure that
  99. 3:49gives it a tactile feel. That flexure is
  100. 3:52a single wall of soft TPU 75A, 0.3 mm
  101. 3:56thick, printed unsupported at a 45°
  102. 3:59overhang. Now, let that sink in for a
  103. 4:02minute. 75 ATPU, 0.3 mm wall thickness,
  104. 4:0745° overhang. It is just crazy that you
  105. 4:11can do that on an FDM printer.
  106. 4:13On the back of each key is a conductive
  107. 4:15pad printed in Recreus conductive
  108. 4:18Fillaflex. That's a 92 ATPU with
  109. 4:21graphene in it to make it conductive so
  110. 4:23that it can make contact with the
  111. 4:25printed circuit board.
  112. 4:27The conductive pads are printed on top
  113. 4:28of little flexible posts so they can
  114. 4:30flatten evenly against the circuit board
  115. 4:32and I used Bambu Lab matte PLA as
  116. 4:36support material because it separates
  117. 4:37easily from the TPU. And to allow the
  118. 4:40buttons to protrude out the front, I
  119. 4:42supported the entire front surface of
  120. 4:44the enclosure with Bambu Lab support for
  121. 4:47PLA. Now, you're seeing clips with a
  122. 4:49bunch of different filament colors
  123. 4:51because I printed several prototypes
  124. 4:53while I was iterating on the design, but
  125. 4:56in the end, it all came together and it
  126. 4:59works. This machine is a game-changer.
  127. 5:02It is going to open up all kinds of
  128. 5:04capabilities that you will definitely be
  129. 5:06seeing in future videos.
  130. 5:08Let's take a closer look at it and I'll
  131. 5:10share my thoughts now that I've used it
  132. 5:12for a few weeks.
  133. 5:17But before we do that, you should know
  134. 5:18that I didn't pay for the printer. Bambu
  135. 5:21Lab sent it to me for testing and
  136. 5:23feedback. They're not paying me anything
  137. 5:25to make the video. They have no control
  138. 5:27over what I decide to show or what I say
  139. 5:30and they are seeing this the same time
  140. 5:32that you are. Now that said, there is a
  141. 5:35link down in the video description and
  142. 5:37if you use it to make a purchase,
  143. 5:39I earn a commission that helps support
  144. 5:40the channel. If that's something that
  145. 5:42you want to do, I appreciate your
  146. 5:44support, but if not, that is cool, too.
  147. 5:46I still hope you find this helpful.
  148. 5:52So what exactly is this thing? This is
  149. 5:55the H3C,
  150. 5:56the latest in the large H series of
  151. 5:58printers from Bambu Lab. It has all of
  152. 6:01the specs that you've come to expect in
  153. 6:03these machines, A fully enclosed 330 by
  154. 6:06320 by 325 mm build volume, 350°
  155. 6:11hardened steel nozzles, 120° heated bed,
  156. 6:1465° actively heated chamber, and HEPA
  157. 6:17and activated carbon air filtration.
  158. 6:20What's new is the Swap-Tech tool
  159. 6:23changer. The machine has a rack of nine
  160. 6:25tools, each with its own independent
  161. 6:27filament feed path, heater, and
  162. 6:29temperature sensor. This allows you to
  163. 6:31print with multiple filaments in any you
  164. 6:34like. You load them once and they stay
  165. 6:36loaded, each in their own dedicated
  166. 6:38tool, and the print head picks them up
  167. 6:40as needed during the job.
  168. 6:42Also new in the H3C is support for 2.85
  169. 6:46mm filament.
  170. 6:48I know, I thought it was weird, too, but
  171. 6:51the larger filament diameter makes it
  172. 6:53easier to handle soft materials. They
  173. 6:56have a new line of 75A TPU in that
  174. 6:59larger diameter filament, and it prints
  175. 7:01at 10 cubic millimeters per second,
  176. 7:04which is just
  177. 7:05crazy. I will show some prints a little
  178. 7:08later and I think you'll be impressed. I
  179. 7:10certainly was.
  180. 7:12You can't, of course, mix different
  181. 7:13filament diameters in the same job.
  182. 7:16The machine has a nine-bay integrated
  183. 7:18AMS built into the top of the enclosure
  184. 7:21with one bay feeding each tool. There
  185. 7:24are ports to bypass the tubes for
  186. 7:26printing flexibles, and there are ports
  187. 7:28in the back of the machine to print from
  188. 7:30external spools. The AMS also supports
  189. 7:33drying up to 85° C, but only in two of
  190. 7:37the nine bays. Not two at a time,
  191. 7:39there's just two bays that have the
  192. 7:41drying functionality.
  193. 7:43This is also the first Bambu Lab printer
  194. 7:45to support mixing nozzle sizes. You can
  195. 7:48finally use a large nozzle to lay
  196. 7:50material down quickly in a print and
  197. 7:52then switch to a different tool with a
  198. 7:54smaller nozzle to embed fine details.
  199. 7:57I'll show some examples of that later,
  200. 7:59as well. The printer supports
  201. 8:00networking, but it is Wi-Fi only. It
  202. 8:04doesn't have an Ethernet port. Now, as
  203. 8:06of today, this printer is selling for
  204. 8:08$24.99 in the US equipped exactly as you
  205. 8:12see it here with nine tools and the
  206. 8:14integrated nine-bay AMS.
  207. 8:21There is no getting around the fact that
  208. 8:23this machine is big. The footprint is
  209. 8:26about the same width as the previous H2
  210. 8:28series printers, but it's about 60 mm
  211. 8:31deeper to accommodate the tool rack in
  212. 8:34the front and it is
  213. 8:36tall. Compared to the other H series
  214. 8:38printers with an AMS stacked on top, the
  215. 8:40difference is only a few inches, but
  216. 8:42because of the size and depth of the
  217. 8:44AMS, most people are going to struggle
  218. 8:47to reach the back row of spools with it
  219. 8:49sitting on a normal height workbench. I
  220. 8:52have it on an adjustable bench here
  221. 8:54lowered down quite a bit and I find it
  222. 8:56pretty comfortable to access at this
  223. 8:58height, but I'm 6-ft or 183 cm tall, so
  224. 9:02not everybody's going to have that same
  225. 9:03experience. I think Bambu Lab is going
  226. 9:06to offer a low storage stand that brings
  227. 9:08it to a more comfortable height, but I
  228. 9:10haven't seen it yet and I'm perfectly
  229. 9:13comfortable using it like this.
  230. 9:15I do think the decision to put the AMS
  231. 9:17on top was a good one. I really like
  232. 9:20that all the spools have a place to
  233. 9:22live. They're in a sealed environment,
  234. 9:23so they don't pick up moisture from the
  235. 9:25air as quickly and they're not hanging
  236. 9:27off the sides of the machine, so you
  237. 9:29don't need to leave extra space beside
  238. 9:32the printer.
  239. 9:33Now, the rack does block visibility from
  240. 9:36the front, which is a little bit
  241. 9:38frustrating, but the rack does move up
  242. 9:40and down during a print and it allows
  243. 9:42you to get a decent view of the nozzle
  244. 9:45laying down the first layer from the
  245. 9:47front looking underneath the rack. I
  246. 9:49find it much easier though to look
  247. 9:51through the window on the front of the
  248. 9:53AMS. With the printer on a low surface
  249. 9:55like I have it here, that window is just
  250. 9:57about at the right height for me just to
  251. 9:59walk up and get a good comfortable view
  252. 10:02of the print. If you're shorter, that
  253. 10:04might be more of a struggle and if you
  254. 10:06wanted to keep a small step stool by the
  255. 10:08machine, I would not judge you for that.
  256. 10:11The other thing that I noticed right
  257. 10:13away is that they changed the little
  258. 10:15musical tones that play at the end of
  259. 10:17the print job. They lowered the last
  260. 10:19note a half step and it really bothers
  261. 10:22me. Just listen to this.
  262. 10:27I want the end of my print to sound
  263. 10:28happy and that does not sound happy to
  264. 10:31me. Bambu Lab, if you are watching this,
  265. 10:34please put the major third interval back
  266. 10:35so that it sounds happy. Is this just
  267. 10:37me?
  268. 10:39Maybe it's just me.
  269. 10:44Bambu Lab calls their tool changer
  270. 10:46system SwapTech. It consists of a rack
  271. 10:49of nine tools at the front of the
  272. 10:50printer and a head that picks them up
  273. 10:52one at a time during the print. The
  274. 10:55extruder motor and feed rollers are in
  275. 10:57the head, so the individual tools just
  276. 11:00have the nozzles, heaters, sensors, and
  277. 11:02a status LED.
  278. 11:04Unlike the Prusa Index system, Bambu Lab
  279. 11:07decided to include a hardwired
  280. 11:09electrical connection to each tool
  281. 11:11alongside the feed tube so that they can
  282. 11:13use a contact temperature sensor and
  283. 11:16they can preheat the nozzle before
  284. 11:17picking it up.
  285. 11:19The tools themselves are specific to the
  286. 11:21filament diameter. My printer came with
  287. 11:24eight 1.75 mm tools and one 2.85 mm. And
  288. 11:30I think that's what the production units
  289. 11:32will have, but you can always buy more
  290. 11:34tools and install whatever combination
  291. 11:36you need. The head itself has a
  292. 11:39motorized cam system so that it can grip
  293. 11:41either filament diameter without
  294. 11:43changing any parts.
  295. 11:45Swapping out a tool is just a matter of
  296. 11:47one electrical connector and one PTFE
  297. 11:50push-to-connect fitting, but there are a
  298. 11:52lot of tubes and wires and springs in
  299. 11:55the way and it is a little bit fiddly.
  300. 11:57You can lift the AMS off the top of the
  301. 11:59machine to get easier easier access to
  302. 12:01all the tubes and wires and I highly
  303. 12:04recommend doing it that way. Smaller
  304. 12:06fingers would also be helpful. If you're
  305. 12:09a small person, you might need a step
  306. 12:11stool to reach the tools, but you will
  307. 12:13have an easier time getting your fingers
  308. 12:15in to actually change them. The hot ends
  309. 12:18are attached with three screws and can
  310. 12:20be swapped separately. You just take out
  311. 12:22the screws, unplug the hot end, and plug
  312. 12:24in a new one to switch nozzle diameters.
  313. 12:27Now, in theory, Bambu Lab will also
  314. 12:30offer a blade cutter and other tools for
  315. 12:32the Swap Tech system, but I haven't seen
  316. 12:35any of those yet.
  317. 12:40The new AMS 3H is integrated directly
  318. 12:43into the top of the printer. It comes in
  319. 12:45a separate box, but it mounts on the
  320. 12:47printer with four screws. It's a fully
  321. 12:50sealed system with nine bays and a
  322. 12:52cam-driven feed roller to pull the
  323. 12:55filament down to the tool when loading,
  324. 12:58but it doesn't actually have a spool
  325. 12:59drive, so when unloading a filament, you
  326. 13:02have to physically pull the filament out
  327. 13:04yourself. It doesn't rewind on its own.
  328. 13:06Now, that's not a big deal, of course,
  329. 13:08because it's a tool changer and it
  330. 13:10doesn't have to unload and reload during
  331. 13:12a job. It does mean, though, that you'll
  332. 13:15have to manually unload PLA before you
  333. 13:18use the heated chamber. This wasn't an
  334. 13:21issue with previous printers because the
  335. 13:22AMS pulled the filament back at the end
  336. 13:25of the print, but because this is a tool
  337. 13:27changer and the filament stays loaded,
  338. 13:29PLA left in the tool will be exposed to
  339. 13:32the elevated chamber temperatures when
  340. 13:34printing something like nylon, and it
  341. 13:36will soften and cause issues if you
  342. 13:38don't unload it.
  343. 13:40Now, most of the bays in the AMS have a
  344. 13:42little bypass port that opens in the
  345. 13:44bottom of the bay so that you can bypass
  346. 13:47the tube for printing flexibles. There
  347. 13:50are little loops on the cable clips to
  348. 13:52guide the filament so that it stays with
  349. 13:53the tool, and it reduces the feed
  350. 13:56resistance, which would otherwise be a
  351. 13:57big problem for very soft materials.
  352. 14:01Now, bays six and eight support drying
  353. 14:03up to 85° C.
  354. 14:06There's a little chamber within a
  355. 14:08chamber to contain the heat in just
  356. 14:10those two bays.
  357. 14:12The electrical and thermal challenges
  358. 14:13become a much bigger deal with nine
  359. 14:15bays, so I understand why they limited
  360. 14:18drying to just two, but
  361. 14:20it really is pretty inconvenient,
  362. 14:21especially since you have to manually
  363. 14:23unload the filament to move spools
  364. 14:25between the bays. I find myself doing
  365. 14:28most of my drying outside of the printer
  366. 14:30because of that.
  367. 14:36They sent me a few rolls of the new 75A
  368. 14:38TPU in the larger 2.85 mm diameter, and
  369. 14:43it might be my new favorite filament.
  370. 14:46Soft filament is hard to manage in a 3D
  371. 14:48printer, but the larger 2.85 mm diameter
  372. 14:52makes it considerably
  373. 14:54easier. This stuff prints fast and
  374. 14:57clean. I got clean prints using the
  375. 15:00default settings with absolutely zero
  376. 15:02stringing, and it prints at a crazy 10
  377. 15:05cubic millimeters per second, which is
  378. 15:06just insane. That's more than three
  379. 15:09times faster than their harder 85A TPU.
  380. 15:14The larger filament diameter really
  381. 15:15makes that much of a difference.
  382. 15:18In my testing, I had good results using
  383. 15:20ordinary PLA basic for support material
  384. 15:23for the TPU 75A. It sticks well, and it
  385. 15:27comes off cleanly if you peel it. Now,
  386. 15:30believing a 0.1 mm gap makes it come off
  387. 15:33easier, but at the expense of a worse
  388. 15:35finish on the supported surfaces.
  389. 15:38If you need to mix soft TPU with
  390. 15:40materials like PETG that require a
  391. 15:42hotter bed, I would recommend using
  392. 15:45liquid glue on the bed sheet as a
  393. 15:47separation layer to keep the TPU from
  394. 15:50fusing to the hot sheet permanently.
  395. 15:53With the glue layer, it will peel off
  396. 15:55cleanly, and you can always add a few
  397. 15:56drops of isopropyl alcohol to release it
  398. 15:59if it doesn't come off on its own. And
  399. 16:01don't forget to apply glue for the prime
  400. 16:03tower, too. The thin initial layers of
  401. 16:06the tower can be pretty hard to get off
  402. 16:08the bed.
  403. 16:13Let's take a look at some test prints.
  404. 16:15This is a smoke collection hood for my
  405. 16:18fiber laser. It's printed in bamboo lab
  406. 16:22PLA basic with just the default settings
  407. 16:24and it's pretty clean. PLA basic tends
  408. 16:28to show every little imperfection in
  409. 16:30layer alignment and flow calibration and
  410. 16:34this looks credible. No notes.
  411. 16:37Jumping to my previous favorite filament
  412. 16:40ABS glass fiber, this is the drill press
  413. 16:43control housing that I've shown in
  414. 16:45pretty much every 3D printer review I've
  415. 16:47ever done. It's printed in black and
  416. 16:50blue ABS glass fiber with bamboo lab
  417. 16:53support for ABS as a breakaway support
  418. 16:57interface. The printer did a beautiful
  419. 16:59job with this material. All their
  420. 17:01printers do a beautiful job with this
  421. 17:02material. The walls are clean, the tool
  422. 17:05alignment looks good and the support
  423. 17:07material peeled away cleanly.
  424. 17:10This is the control panel for my surface
  425. 17:12grinder, also printed in ABS glass
  426. 17:14fiber. This is a large part and it
  427. 17:17really requires a heated chamber to stay
  428. 17:19flat and the H3C did a great job with
  429. 17:23it. Now in the past, I have always made
  430. 17:25the markings on the front with a fiber
  431. 17:28laser after printing, but since the H3C
  432. 17:31supports mixed nozzle sizes, I used a
  433. 17:340.4 mm nozzle for the body and a 0.2 mm
  434. 17:38nozzle to print the text and the
  435. 17:40markings using white ABS. And as you can
  436. 17:43see, it's it's it's gorgeous. I would
  437. 17:47not have thought it would be possible to
  438. 17:49print this clearly at this size, but
  439. 17:52you're you're looking at it. I will
  440. 17:54definitely be skipping the laser in the
  441. 17:56future if I can get results that look
  442. 17:58like this.
  443. 18:00I also used the multiple nozzle
  444. 18:02diameters to print these labels for
  445. 18:04terminal blocks in an industrial control
  446. 18:07cabinet. These are white PLA printed
  447. 18:09with a 0.4 mm nozzle and black text
  448. 18:13printed with a 0.2.
  449. 18:15These were printed standing up on the
  450. 18:16bed and while they turned out better
  451. 18:18than they would have with a larger
  452. 18:20nozzle. I think the benefit isn't as
  453. 18:22pronounced in this orientation. When you
  454. 18:25mix nozzle sizes, the slicer also mixes
  455. 18:28layer thicknesses, and while it works
  456. 18:31well, I think the benefits of the
  457. 18:33smaller nozzles are more apparent with
  458. 18:36details printed flat on the bed or on
  459. 18:38top surfaces of the print.
  460. 18:41I did try the new color mixing feature
  461. 18:43in the slicer. This part was printed in
  462. 18:46CMYK W with cyan, and magenta, yellow,
  463. 18:50black, and white PLA. All of the other
  464. 18:53colors that you see here are the result
  465. 18:55of mixing those filaments in the print.
  466. 18:58I also tried to print a gradient from
  467. 18:59black to gray across the width of the
  468. 19:01wheel, and it's
  469. 19:03okay, not great. This isn't really
  470. 19:06something that I see myself using much,
  471. 19:08but I thought I'd give it a try. I'm
  472. 19:10sure other people with more experience
  473. 19:12and taste could get better results.
  474. 19:16Let's jump up to the new 75 A TPU. This
  475. 19:19is a set of flexible grommets for a
  476. 19:21cable entry system on an industrial
  477. 19:24control cabinet. This is the very first
  478. 19:26thing I attempted to print in this
  479. 19:28material, and it came out essentially
  480. 19:31perfect on the first try. I expected to
  481. 19:33have problems with stringing in a
  482. 19:35material this soft, but it's just clean.
  483. 19:39This stuff is way softer than any TPU
  484. 19:42I've ever used, but it prints with less
  485. 19:44drama, and that opens up all kinds of
  486. 19:46possibilities. My only real complaint
  487. 19:49about it is that they didn't send me any
  488. 19:51black.
  489. 19:52I also printed a full bed of button
  490. 19:54inserts for my ELS project. I normally
  491. 19:57print these in something much harder,
  492. 19:59like Ninjatek Cheetah, which is around
  493. 20:0295 A, and 50 sets of inserts usually
  494. 20:06take 10 to 12 hours.
  495. 20:09This job finished in just over 5 hours,
  496. 20:11and they turned out great.
  497. 20:13This job is really the worst case for
  498. 20:16stringing because starting at layer 15,
  499. 20:19there are literally 350 tiny islands in
  500. 20:22every layer of the print. There's nearly
  501. 20:25always at least a few little hairs
  502. 20:27between the buttons, but I don't see any
  503. 20:30in this print. This is really good.
  504. 20:33And here of course is the calculator I
  505. 20:35showed earlier. This was a challenging
  506. 20:37print just because it mixes so many
  507. 20:40different filaments and it has a bunch
  508. 20:42of weird requirements. I need the
  509. 20:44buttons to flex, but I want them to have
  510. 20:46a very specific tactile feel. I'm mixing
  511. 20:50different colors of soft TPU for the
  512. 20:52keycaps and I need the markings to be
  513. 20:54clean. I need to control the optical
  514. 20:56properties of the smoked lens over the
  515. 20:58front and the red lenses inside the
  516. 21:01display segments and I need the
  517. 21:03translucent white diffusion layers to be
  518. 21:05smooth and consistent. I think the real
  519. 21:08standout feature here though is the
  520. 21:10super thin walls of the button flexures.
  521. 21:13They're 0.3 mm thick built up in free
  522. 21:16space at a 45° angle in 75 A TPU. I know
  523. 21:19I already mentioned that. I did have to
  524. 21:22fiddle with the settings a little bit to
  525. 21:23get them perfect, but the end result is
  526. 21:26pretty much just that. Perfect. There
  527. 21:29are no lumps or holes and they flex
  528. 21:31exactly the way I wanted them to. If I
  529. 21:35had to quibble with anything here, it
  530. 21:37would be the Recreus conductive
  531. 21:39Filaflex. It's a little bit underfilled,
  532. 21:41but I mean I just used a generic TPU
  533. 21:44profile and I did zero tuning aside from
  534. 21:46setting the recommended temperature. So,
  535. 21:49that's kind of on me.
  536. 21:51The last test print I have here is the
  537. 21:53enclosure for the power testing fixture
  538. 21:55I showed in my previous video. This is
  539. 21:59printed in Bambu Lab PAHT carbon fiber
  540. 22:02and while most of the print is
  541. 22:04exceptional as usual, there is something
  542. 22:07going on with the first layer. It felt
  543. 22:09just a little bit crowded to me just
  544. 22:11watching the print and you can see some
  545. 22:13wrinkles in the surface finish as a
  546. 22:15result. Now, no other Bambu Lab printer
  547. 22:18I've ever used has had any trouble with
  548. 22:20this material and no other material I've
  549. 22:23used in this printer has had any
  550. 22:25problems. ABS glass fiber lays down
  551. 22:27perfectly.
  552. 22:28I reported this to Bambu Lab and they're
  553. 22:31working on it. The latest beta version
  554. 22:33of the slicer is a little bit better and
  555. 22:35I expect they'll fix it completely at or
  556. 22:37soon after release, but this is kind of
  557. 22:40a rare miss for them.
  558. 22:46This is a big printer with a big bed and
  559. 22:48a fast, powerful heater and it can pull
  560. 22:51a lot of power. The spec sheet says that
  561. 22:54it can pull a peak of 1,800 W, which is
  562. 22:58going to pretty much max out a 15 amp
  563. 23:00110 V circuit here in the US. It only
  564. 23:03draws that for a few minutes during warm
  565. 23:05up and then it settles down to 200 to
  566. 23:07500 W depending on the print
  567. 23:10temperatures. The printer does have a
  568. 23:12low power mode that caps that at 1,050 W
  569. 23:16for better compatibility with
  570. 23:18residential outlets.
  571. 23:20I took a look with my power analysis
  572. 23:21gear and can confirm that those numbers
  573. 23:24are accurate, but there are also some
  574. 23:26neat things that they're doing with the
  575. 23:28power modulation that I wanted to show
  576. 23:30you.
  577. 23:31This is the power waveform while heating
  578. 23:32both the bed and the chamber to high
  579. 23:35temperature for printing nylon. I never
  580. 23:38saw the average power exceed about 1.3
  581. 23:40kW,
  582. 23:41so I assume the 1.8 kW they quote is a
  583. 23:45worst-case number that includes the
  584. 23:47filament dryer. But what's really
  585. 23:49interesting is what happens when the
  586. 23:51printer reaches temperature and starts
  587. 23:53modulating the power to the heaters.
  588. 23:56Previous printers used phase angle
  589. 23:58modulation, meaning that they switch the
  590. 24:00power on to the heaters partway through
  591. 24:03the AC cycle, putting a nice square edge
  592. 24:06on the waveform. But the H3C is using a
  593. 24:09zero-crossing switching algorithm that
  594. 24:11turns the power on and off for entire
  595. 24:14half cycles of the AC waveform,
  596. 24:17eliminating those sharp edges. This
  597. 24:20keeps the power factor high, but it also
  598. 24:22dramatically reduces current harmonics.
  599. 24:25In my testing, this machine comes in way
  600. 24:28under the IEC standard limits.
  601. 24:30But, unlike the early versions of the
  602. 24:33H2D before they switched to phase angle
  603. 24:35modulation, it [snorts] isn't using
  604. 24:37burst fire. It's not running multiple
  605. 24:39cycles together. It's switching the
  606. 24:41heaters on and off for individual half
  607. 24:44waveforms. And it's dithering those half
  608. 24:46waveforms across the positive and
  609. 24:48negative halves of the AC cycle. And
  610. 24:51that is going to reduce the tendency for
  611. 24:54the heater switching to cause LED lights
  612. 24:56to flicker and should help balance
  613. 24:59neutral currents in a multi-printer
  614. 25:00environment. These are all well-known
  615. 25:03power modulation techniques, but I have
  616. 25:05never seen them implemented this well
  617. 25:08in a consumer device before. This is
  618. 25:10actually pretty sophisticated.
  619. 25:12With a high-temperature nylon job, the
  620. 25:14average power settled down to around 450
  621. 25:18W steady state during the print. And
  622. 25:21with a PLA job, it settled down to
  623. 25:22around 250 W. So, that major power spike
  624. 25:26is really just during the initial
  625. 25:28warm-up. And when the printer isn't
  626. 25:30printing anything, it goes into sleep
  627. 25:32mode and turns off the LED lights unless
  628. 25:34you have them configured to stay on. And
  629. 25:36the total power consumption drops below
  630. 25:38about 15 W. I
  631. 25:40I also tested the printer in the
  632. 25:42low-power mode. The spec sheet says that
  633. 25:45it should limit peak power to 1,050 W.
  634. 25:48And I measured it around 1,030.
  635. 25:51It appears to be accomplishing this by
  636. 25:53heating the bed first and then only
  637. 25:55turning on the chamber heater after the
  638. 25:57bed reaches steady state and starts
  639. 25:59modulating. After that, the two heaters
  640. 26:02are dithered together and settle down to
  641. 26:04the same 200 to 500 W during the print.
  642. 26:08Low-power mode does slow down the
  643. 26:10warm-up cycle, but not by very much. In
  644. 26:12my test, it only added a couple of
  645. 26:14minutes. Now, I have 20 amp circuits for
  646. 26:17my printers, but if you just have
  647. 26:18typical 15 amp 120 V residential
  648. 26:22circuits in the US, you might just want
  649. 26:24to leave low-power mode turned on all
  650. 26:26the time.
  651. 26:31The H3C is a part of the standard Bambu
  652. 26:34Lab software ecosystem with Bambu Studio
  653. 26:37and the Bambu Handy mobile app. The
  654. 26:40slicer Bambu Studio synchronizes with
  655. 26:42the printer so that you don't have to
  656. 26:44configure which filaments, filament
  657. 26:46diameters, and nozzle sizes are
  658. 26:48installed and loaded. It just knows, and
  659. 26:51you can just select the options you want
  660. 26:53to use in a print. If you've been in the
  661. 26:55Bambu Lab ecosystem for a while, you
  662. 26:57probably just take this for granted, but
  663. 26:59not all printers have that. And once you
  664. 27:02get to the level of complexity a true
  665. 27:04tool changer like this offers,
  666. 27:07that's a real differentiator.
  667. 27:09Now, slicing isn't what it used to be.
  668. 27:12The overall complexity is getting
  669. 27:14really, really high. For this printer,
  670. 27:17the slicer has to manage nine tools,
  671. 27:20nine loaded filaments, multiple filament
  672. 27:22diameters, multiple nozzle diameters,
  673. 27:25variable layer heights, color mixing,
  674. 27:27multiple wall generators, and a hundred
  675. 27:29other minor features that all interact
  676. 27:32with one another. The test matrix is
  677. 27:34insane.
  678. 27:36As a software developer myself, I
  679. 27:38appreciate the complexity of the
  680. 27:39challenge, but I also have to say that
  681. 27:42the pre-release software that they
  682. 27:43provided with the printer for those of
  683. 27:45us who were testing it was a little more
  684. 27:47wobbly than it has been in previous
  685. 27:49releases. I found several bugs and
  686. 27:52reported them, and to their credit,
  687. 27:54they've already fixed many of them, and
  688. 27:56more fixes are promised in the final
  689. 27:58release. I'll talk more about the
  690. 28:00specific issues in a little bit.
  691. 28:07This is a cloud-connected printer, and
  692. 28:09it turns out some people have feelings
  693. 28:11about that. Now, for me and my usage of
  694. 28:14the machine,
  695. 28:15I love it. I love having my settings
  696. 28:17synchronized across multiple computers.
  697. 28:19I love being able to start and monitor
  698. 28:21prints from anywhere, and I love the
  699. 28:23fact that the ecosystem is constantly
  700. 28:26improving. Every Bambu Lab printer I've
  701. 28:29owned has gotten better over time as
  702. 28:32they incorporate feedback and improve
  703. 28:34the software and the firmware. I know
  704. 28:37that this also means that they sometimes
  705. 28:39change things that upset people and
  706. 28:41there have been some recent examples,
  707. 28:44but it also means that the ecosystem can
  708. 28:46respond to emerging security threats.
  709. 28:49And boy, have there been a lot of
  710. 28:52emerging security threats lately.
  711. 28:55That trend is not going to change. It is
  712. 28:57only going to accelerate. I know that
  713. 29:00there are people who advocate never
  714. 29:01updating your software or firmware and
  715. 29:03maybe you'll get away with that if
  716. 29:05you're not connected to a network
  717. 29:07at all, any network, even a private
  718. 29:10network at your house,
  719. 29:12but if you're connected to a network,
  720. 29:13that is terrible advice in today's
  721. 29:16world. Just understand that this is a
  722. 29:18connected device and if you want to live
  723. 29:20in a disconnected world where nothing
  724. 29:22ever changes, this might not be the best
  725. 29:25fit for you. Though, if you're an
  726. 29:27enterprise user and you need to run in
  727. 29:28an isolated network environment, check
  728. 29:30out Bambu Lab Fleet Hub.
  729. 29:36Let's go through some of the issues I
  730. 29:37encountered and some solutions that
  731. 29:39might help you if you run into the same
  732. 29:41things. The very first thing that I ran
  733. 29:43into is that I could not find the screws
  734. 29:46to mount the AMS on the top of the
  735. 29:48printer. Turns out they're in a little
  736. 29:49plastic bag taped to the package of
  737. 29:52desiccant that you're also supposed to
  738. 29:54put in the AMS, but when I was unpacking
  739. 29:56it and I saw that, I thought it was just
  740. 29:58a desiccant pack for shipping and I
  741. 30:00threw it away. Don't do that. The screws
  742. 30:03you need are in there.
  743. 30:05I already mentioned the issues I had
  744. 30:07with the first layer of PAHT-CF
  745. 30:10being a little bit too crowded into the
  746. 30:12bed. I reported that and they sent me
  747. 30:15some start G-code that made it a little
  748. 30:17bit better. Now, other high temperature
  749. 30:19filaments don't have this problem, so
  750. 30:21it's probably just a tuning issue that
  751. 30:23they will eventually work out. In the
  752. 30:26pre-release version of Bambu Studio that
  753. 30:28I've been using for my testing, the
  754. 30:30slicer has a bug when mixing .4 mm and
  755. 30:34.2 mm nozzles and using dedicated
  756. 30:37support material. If you have the slicer
  757. 30:40in multi-diameter mode, it won't
  758. 30:43actually allow you to set the support
  759. 30:45interface gap to zero. It always leaves
  760. 30:48a .2 mm Z gap. I reported this, and they
  761. 30:51said it is a confirmed bug, and it will
  762. 30:53be fixed in the final release of the
  763. 30:55slicer, but I of course haven't seen
  764. 30:57that, because it's going to be releasing
  765. 30:59about the same time as this video. I
  766. 31:02also had a lot of trouble with nozzle
  767. 31:04offsets, or maybe it was with bed
  768. 31:07leveling when using support material. My
  769. 31:10support interface layers were either not
  770. 31:12sticking to the material below, or the
  771. 31:14print material was not sticking to the
  772. 31:16top of the support. It appears that
  773. 31:19there's some kind of issue with the
  774. 31:20automatic mode that determines when to
  775. 31:23recalibrate nozzle offsets. I ran the
  776. 31:26printer calibration cycle, and switched
  777. 31:28the nozzle offset calibration and bed
  778. 31:31leveling calibration to on when sending
  779. 31:34a job to the printer, and the problem
  780. 31:36went away. I reported this to Bambu Lab,
  781. 31:39and the working theory is that there's
  782. 31:40something wrong with the auto mode that
  783. 31:42decides when recalibration is needed,
  784. 31:44and just switching it to on bypasses
  785. 31:47that entirely.
  786. 31:49There also appears to be a similar issue
  787. 31:50with flow dynamics calibration and the
  788. 31:5375A TPU. The printer should never
  789. 31:56attempt to calibrate the flow dynamics
  790. 31:58for the 75A material, because it's
  791. 32:01pre-calibrated from the factory. But, if
  792. 32:03you set the flow dynamics calibration to
  793. 32:06on when sending a print job, it tries to
  794. 32:08do it anyway and causes print quality
  795. 32:11issues. The solution for now is just to
  796. 32:13leave it set to auto. I I only changed
  797. 32:15it because I was trying to solve the
  798. 32:17support adhesion issue I just talked
  799. 32:19about, but the default works fine. On
  800. 32:22mode should also work though, and
  801. 32:23they're looking at it.
  802. 32:25I'll also mention that when you replace
  803. 32:27the tools in the rack, you need to
  804. 32:29insert them straight in, and then they
  805. 32:31drop down onto the nozzle pads. At
  806. 32:34first, I thought you were supposed to
  807. 32:35just hook the top and then swing the
  808. 32:37bottom in, but if you do that, it's easy
  809. 32:39to not get it fully seated, and it can
  810. 32:41fall out of the rack during the print.
  811. 32:44Ask me how I know.
  812. 32:46Once I started inserting them correctly,
  813. 32:47I didn't have any more issues.
  814. 32:50I also ran into a weird bug when
  815. 32:52performing a cold pull. The cold pull
  816. 32:54works great, but the printer lowers the
  817. 32:56bed a little bit during the process. I
  818. 32:59did several cold pulls in a row, and the
  819. 33:02bed collided with the bottom of the
  820. 33:03chamber and made a loud noise that did
  821. 33:06not make me happy, though it it doesn't
  822. 33:08appear that it hurt anything. I reported
  823. 33:10it, and I haven't seen the issue again
  824. 33:12after a firmware update. Maybe it was a
  825. 33:15weird corner case, or maybe they fixed
  826. 33:17it. I'm really not sure. And as long as
  827. 33:20I'm mentioning issues, I will mention
  828. 33:22the print job end music again.
  829. 33:25That's a bug, right?
  830. 33:28Right?
  831. 33:34So, what's the bottom line?
  832. 33:36This printer is a tour de force, if
  833. 33:38you'll excuse my French. It handles
  834. 33:40high-temperature engineering materials
  835. 33:42with a heated chamber. It handles super
  836. 33:44soft flexibles with the 2.85 mm filament
  837. 33:47support. It allows you to mix multiple
  838. 33:49flexible materials, multiple filament
  839. 33:51diameters, multiple nozzle diameters in
  840. 33:54a single print. And in my testing, I was
  841. 33:56able to freely mix different brands of
  842. 33:58filament and even weird stuff like
  843. 34:00graphene-filled TPU without any issues
  844. 34:03at all.
  845. 34:04This printer finally does all of the
  846. 34:07crazy things that I have wanted to do
  847. 34:09with a 3D printer since I built my first
  848. 34:11dual extruder machine back in 2014.
  849. 34:14And I think it bears pointing out that
  850. 34:16this isn't an experiment or a tech demo.
  851. 34:19This is a refined, well-engineered,
  852. 34:21mass-produced product with all the
  853. 34:24polish that we've come to expect from
  854. 34:25Bambu Lab.
  855. 34:27Now, the selling price of $24.99 in the
  856. 34:30US is incredibly aggressive. There is
  857. 34:33not another machine on the market that
  858. 34:35combines a high-count tool changer, a
  859. 34:37large build volume, an actively heated
  860. 34:39chamber, an enclosed filament management
  861. 34:41system, and all of the rest of these
  862. 34:43capabilities at
  863. 34:45really any price, let alone under
  864. 34:47$2,500.
  865. 34:49This is going to be a market disruptor.
  866. 34:52It's going to be very challenging for
  867. 34:54any other manufacturer in the market
  868. 34:56today to respond. I hope they do because
  869. 34:59competition benefits everyone, but this
  870. 35:02is going to be a hard act to follow.
  871. 35:04Now, to be fair, if your needs are
  872. 35:06simple and you just want to print
  873. 35:07multiple colors of PLA and PETG, there
  874. 35:10are plenty of other machines on the
  875. 35:12market that can do that at a much lower
  876. 35:14price point. But, if you routinely use
  877. 35:17higher temperature materials that need a
  878. 35:19heated chamber, and if you need to mix
  879. 35:21multiple flexibles in a single print,
  880. 35:23this might be the machine you've been
  881. 35:25waiting for.
  882. 35:26I know it's the machine that I have been
  883. 35:28waiting for.
  884. 35:29Like I said at the beginning, there is a
  885. 35:31link down in the video description, and
  886. 35:33if you found this useful, that's a great
  887. 35:35way to help support the channel.
  888. 35:37But, as always, if that's not something
  889. 35:38you want to do, I still hope you found
  890. 35:40this useful.
  891. 35:41Thank you for watching.
  892. 35:44>> [music]
  893. 35:53[music]

About this transcript

This page contains the full transcript of My Thoughts on the Bambu Lab H3C After Using it for a Real Project by Clough42, generated from the public captions YouTube serves with the video. The transcript has 6,054 words across 893 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.