MotiveWave Heatmap Setup (Bookmap Style) | Episode 9 — Transcript
Full transcript
- 0:00Friends, whenever we hear the word "
- 0:01heat," the only software that comes to
- 0:03mind is our Bookmap. Bookmap is an
- 0:05industry standard, a top-notch software
- 0:07. No one can beat it. I guarantee this.
- 0:10I haven't been able to do it today, and
- 0:11maybe I will in the future. But we know
- 0:14it's a bit costly. Then we learn how to
- 0:16create a heat map in Motive. While you
- 0:18can't create an exact version of
- 0:20Bookmap, you can use it as a beginner.
- 0:22We'll create this much. To create it, I
- 0:24clicked the plus icon. A new window
- 0:26will open. I clicked on "Chart." We'll
- 0:28also verify the data now. You need to
- 0:30go to "Symbols." Here, a 5-minute chart
- 0:32will open. I'll click "OK." After
- 0:35clicking "OK," whatever chart you open,
- 0:36no matter what, candles may appear here
- 0:38. Let's assume your chart is the same.
- 0:40What do you need to do? Right-click. Go
- 0:42to Chart Settings. Go to Theme. Here,
- 0:45you'll have Light or Navy. The color
- 0:47can already be any. You just need to
- 0:49darken it. Then, you need to Apply and
- 0:51OK. This is the first setting. This is
- 0:53the second setting. Go to this area
- 0:54above, to the right of the study. After
- 0:56going there, there's a line. It's a
- 0:58square line. Select the square line.
- 1:00After that, right-click on the chart.
- 1:02Go to Chart Settings. Go to Bar
- 1:04Settings. Linear will appear. Below,
- 1:06you'll see Minutes. Change the minutes
- 1:07to milliseconds. And here, change it to
- 1:10500. This means half a second. Then,
- 1:12you'll see Line Levels. This will be on
- 1:14. It will also show Levels here. So,
- 1:16you need to make it non-existent. Then,
- 1:18you need to Apply and OK. This will be
- 1:20your setting. In the new window below,
- 1:22it will display completely. We'll
- 1:24remove the volume. What do you do next?
- 1:27Place our Order Flow Heat Map here.
- 1:29Search for "Order Heat Map." Click "Add
- 1:31." To set it, click "Settings." You can
- 1:36enter anywhere from 250 to 300. I'm
- 1:37using 250. After that, you don't need
- 1:39to change the smooth factor at all. The
- 1:41smooth factor will smooth it out. I've
- 1:43set the contrast to full. You can
- 1:44adjust it accordingly. It's fine if
- 1:46it's full. Don't change the opacity.
- 1:47Leave it full. The maximum size filter
- 1:50is 90. I prefer to keep it at 80. 80 is
- 1:53perfect. After that, zoom in. As soon
- 1:57as you zoom in, your heat map will
- 1:58appear completely. Lines will appear.
- 2:00One more thing, for this heat map, you
- 2:02need level 2 data. If you have
- 2:04purchased Motive from Lucid, you'll
- 2:06find an add-on there. You can purchase
- 2:08a bundle with it. If you purchase the
- 2:09full bundle, you'll get the entire
- 2:11bundle, which also includes gold. If
- 2:12you only buy CME, you'll be able to do
- 2:15ES and NQ. So, you need the full bundle
- 2:17, if you buy gold. Many people will say
- 2:19, "Sir, my heat map works without it."
- 2:21But let me explain. Their liquidity
- 2:23won't work properly. It'll disappear in
- 2:25the middle or won't show proper data.
- 2:27I've experimented with it completely.
- 2:28Second, you need to set the depth of
- 2:30market here. Add the depth of market.
- 2:33Your depth of market is set here. Now,
- 2:34there's a little setting for it.
- 2:35Nothing major. Go to Settings. Just
- 2:38increase the text a little. I'll make
- 2:40it 16. 16 is a little appropriate so
- 2:42that your liquidity can be read clearly
- 2:44. Click OK. Let's keep the text white.
- 2:46It's already set, and nothing else
- 2:47needs to be done inside it. The third
- 2:49main thing is to add a bubble. So, here
- 2:50we'll search for Big Trade. Then add it
- 2:53. After that, we need to go to Settings
- 2:55and enable Auto Circle here. You can
- 2:57set the maximum size according to your
- 2:59needs. I'm saying "Auto Circle" because
- 3:01it will show you the order sizes,
- 3:02whether small or large. Otherwise, if
- 3:04you want to set one, you can set one.
- 3:05I'll show you both. The minimum trade
- 3:07size should be between three and five.
- 3:09I'm setting three because you won't see
- 3:11more orders. If you don't set three,
- 3:13I'm clicking on it. See, the orders are
- 3:15displayed here, and our heat map is
- 3:16completely ready. We'll also verify
- 3:18this heat map. Before that, we've set a
- 3:21simple Auto Circle. Let's try just
- 3:23applying it to the circle. Just
- 3:24applying the circle will be fine. You
- 3:26can see how many orders are coming in.
- 3:28Whenever we change the size of the
- 3:30order or apply Auto Circle, the problem
- 3:31is that your bubble will be placed on
- 3:33top of another bubble. This is because
- 3:35these are 2D bubbles. 2D bubbles aren't
- 3:37as efficient. But if we talk about
- 3:39Bookmap, look, it's a 3D bubble. It's a
- 3:41very good bubble. Liquidity is clearly
- 3:43displayed. It's unbeatable because
- 3:46Bookmap is highly compatible with any
- 3:48system. You can run it even on a
- 3:50low-end PC. You can carry any laptop
- 3:53with you and run it. But these are a
- 3:55bit heavy. They're not compatible
- 3:57because Bookmap's focus is solely on
- 3:59heat maps. So, they've created this
- 4:00based on that. So, yours has been
- 4:01created based on this. You can set the
- 4:03threshold according to your needs. You
- 4:05can set the size of the bubbles as
- 4:06small or large as you want. Now, to see
- 4:07this, let's compare the data with
- 4:09Bookmap. Look, our resting liquidity
- 4:12here is approximately below 50 and 55.
- 4:14Let's just see how many orders there
- 4:17are. Look, it's showing 19. So, let's
- 4:19look at 50 19. If we look at it a
- 4:22little bit, it becomes 19, so it
- 4:24verifies that our data is correct.
- 4:26There's nothing wrong with it. If you
- 4:27want to see it completely, you can
- 4:29watch the order flow tutorial on
- 4:31Bookmap, where you'll learn thoroughly.
- 4:33You can use it. No problem. There's no
- 4:35problem with it. As a beginner or at
- 4:37the professional level, I wouldn't
- 4:38recommend it at all. As a beginner, you
- 4:40can use it for them. There's currently
- 4:43no liquidity in this area for learning.
- 4:45If you type it this way, you can see
- 4:47it's complete. We've entered the depth
- 4:50in this heat map, which is the depth of
- 4:53this heat map. If you increase it to
- 4:55300, it will increase even more. But
- 4:56the more you increase it, the more the
- 4:58brightness of the liquidity will
- 4:59decrease. So, you have to keep this in
- 5:01mind. Now look at the liquidity below,
- 5:03at 21, it's red. Okay? And it's not
- 5:06clearly visible. If we look at it, at
- 5:08its liquidity, from this point on,
- 5:09you'll see that this liquidity at 20
- 5:11has 1001 orders placed here. It's
- 5:13clearly visible. It's not clearly
- 5:15visible here. So, you'll have to
- 5:16examine it a little bit, from this
- 5:17point on. How many orders are there? It
- 5:19will also fluctuate, because
- 5:21accordingly, it won't be completely
- 5:22auto-setup. Okay? So, you have to
- 5:24create it completely accordingly. And
- 5:26then you can play counters. You can
- 5:29zoom in and out this way. You can move
- 5:30it back and forth. You have to remember
- 5:32one thing: it will display data as soon
- 5:34as you start. If we talk about the
- 5:35bookmap, we get historical data from 48
- 5:38hours to days. Click here and you'll
- 5:41get all the data. This isn't the case.
- 5:43When you open the heat map, you'll see
- 5:45data starting within the same hour.
- 5:48Previous data won't be displayed. So,
- 5:49you can read liquidity completely here.
- 5:52For example, it's yellow, it's red here
- 5:54. Right? And zoom in a little. For
- 5:56example, the liquidity below, your
- 5:58portion will appear; how do you read it
- 5:59? It's not visible clearly. So, when
- 6:01the price closes a little, you can see
- 6:03it. To see it, you'll have to do a
- 6:05little bit of this because it's not
- 6:07fully compatible with the system. It
- 6:09hasn't worked perfectly yet, and no one
- 6:11can beat it, as I mentioned earlier.
- 6:14But it looks quite good, you can go
- 6:16with it; it's much better because our
- 6:18main aim is to monitor liquidity, not
- 6:20to judge which one is better. As for it
- 6:22, it has low latency, it's very
- 6:24well-tuned, compatible, and powerful.
- 6:26It's quite easy to handle. There are so
- 6:29many other functions, so many things
- 6:30inside it. Because it's made
- 6:32specifically for that purpose. So I
- 6:34hope you enjoyed the video. Thank you
- 6:36for watching this video. Mumbai.
About this transcript
This page contains the full transcript of MotiveWave Heatmap Setup (Bookmap Style) | Episode 9 by Keshav Jindal, generated from the public captions YouTube serves with the video. The transcript has 1,419 words across 201 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.