Mothers Ceramic Spray & Rinse: Don't Judge Too Quickly! — Transcript
Full transcript
- 0:00Hello folks. That uh Scott with Dallas
- 0:03Paint Correction and Dallas Paint
- 0:04Coatings. I want to talk about
- 0:06something. I actually found this at What
- 0:08did I find I found it at AutoZone. This
- 0:11is made by Mothers. It's a ceramic spray
- 0:13and rinse touchless quick coat. This is
- 0:16kind of like or it's supposed to be like
- 0:18Gyeon Wetcoat or CarPro Hydro. These
- 0:21these spray on and rinse off sealants.
- 0:24So, the way it works is after you've
- 0:26washed your car and you've rinsed all
- 0:27the soap and the panel is still wet, you
- 0:30spray this on the panel and then you
- 0:32high pressure rinse it off and you end
- 0:35up putting some type of silica sealant,
- 0:38a hydrophobic barrier on the paint by
- 0:40simply activating it with high pressure
- 0:42water. This is really cool because I
- 0:44don't know a lot of products like this
- 0:46on a retail level, meaning you and I can
- 0:49just walk into a store and buy this
- 0:51stuff. This Mothers one is the only one
- 0:54I know of. I think Meguiar's ceramic wax
- 0:57kind of works that way, but they want
- 0:59like a foundation layer on the paint
- 1:01first. So, I'm not really going to put
- 1:03it in that category, but this could be
- 1:05really cool if you wanted one of these
- 1:07spray on rinse off type of sealants that
- 1:10you spray on when the car is wet, high
- 1:12pressure it and you know, bingo, you've
- 1:14got a
- 1:15a nice sealant on the paint. I'm going
- 1:18to hit this panel with water. Car's
- 1:20clean, but let's make sure it's flat.
- 1:23All right, hang tight with me, guys. So,
- 1:25we're going to hit it with water.
- 1:26>> [snorts]
- 1:36>> There's really nothing on there. You
- 1:37know what it is? It's very, very clean
- 1:39paint and it's been clayed and it was
- 1:42polished a couple of months ago.
- 1:44There's nothing really on it. It's just
- 1:46clean paint and it's able to kind of
- 1:48somewhat beat up, but it's not uniform
- 1:50and it does sheet kind of slowly towards
- 1:52the bottom. You can see that again.
- 1:58You see down below, it takes a little
- 2:00longer for it to sheet.
- 2:01But I'm going to try this stuff and
- 2:02let's see if we can drastically change
- 2:04the hydrophobic properties on this panel
- 2:07cuz if we can, man, this is going to be
- 2:09a nice winner that all of us can walk
- 2:11into AutoZone and get one of these
- 2:12things. If you're a pro, and let's say
- 2:14you ran out of Gyeon Wetcoat or CarPro
- 2:16Hydro or something like that, and you
- 2:17wanted to get something local, that'd be
- 2:19kind of nice. Let's see what happens.
- 2:21Let me rinse this off then we'll spray
- 2:22it.
- 2:28All right, go in here and I'm going to
- 2:29be a little liberal with it.
- 2:31Let's see if it changes the hydrophobic
- 2:33nature. I'm probably putting way too
- 2:34much on here, right? But we're going to
- 2:36give it a nice shot.
- 2:37It says to spray it on there and rinse
- 2:38it off immediately, so we'll go ahead
- 2:40and do that.
- 2:41>> [snorts]
- 3:02>> Folks, it's helped a little bit, but
- 3:03it's not all that impressive. But here's
- 3:05something I want to tell you. Sometimes
- 3:08when you spray this on and you rinse it
- 3:09off and it doesn't look impressive, you
- 3:11got to wait a couple of minutes cuz
- 3:13we're basically just getting it on the
- 3:15panel, activating it with high pressure
- 3:17water, but it may need a little time to
- 3:19cure. Let's see what happens if we just
- 3:21let it sit. Does it change the
- 3:23hydrophobic properties?
- 3:25Is all that juicy goodness, the silica
- 3:26kind of sitting on there now and
- 3:29bonding and trying to crosslink, and
- 3:30let's see if it gets a little bit more
- 3:32hydrophobic.
- 3:33Let's try it again.
- 3:43Yeah, you'll notice now it's starting to
- 3:45sheet much faster. Sometimes when you
- 3:46guys use these products, you're like,
- 3:48"Oh, it doesn't look all that great.
- 3:50It's not all that impressive immediately
- 3:51after I rinse it off. Just give it a
- 3:54minute. Now, I want to try something
- 3:55else. It says to to remove it after I
- 3:58spray it immediately. I'm going to let
- 4:00it dwell for a little bit. Be careful
- 4:02doing that with some of these products
- 4:04cuz you can stain the paint and you
- 4:06might have to buff it off or whatever to
- 4:08get it off or maybe an IPA wipe down
- 4:09will help you, but let me apply it and
- 4:11let it sit for a couple of minutes.
- 4:13Again, apply it kind of heavy.
- 4:17It smells good.
- 4:19And then I'm going to let it sit for a
- 4:20couple of minutes. Let's see if that
- 4:21helps. We've already got some on there,
- 4:23right? From the initial application, so
- 4:25maybe this will help a little bit.
- 4:28Give it a couple minutes and then we'll
- 4:29rinse it off. I did see a change. It
- 4:31wasn't drastic. It wasn't like there are
- 4:33some products out there on a pro level
- 4:36that you got to buy online with some
- 4:37detailing supply houses that are
- 4:39incredibly hydrophobic the minute you
- 4:42rinse them off. Again, with a retail
- 4:44product like this, you may just have to
- 4:46be patient. You may just need to wait a
- 4:47little bit. I also want to say letting
- 4:50it sit on the panel like this for some
- 4:51of you that might be using these types
- 4:53of products, be careful doing that
- 4:55especially in direct sunlight. You
- 4:56should never use these products in
- 4:58direct sunlight. Make sure the panel's
- 5:00not warm to the touch. But some products
- 5:03you could not let dwell. They're just
- 5:04too strong on a pro level and it could
- 5:06actually stain the paint a little bit
- 5:08and you'll have to remove it by actually
- 5:10doing a very light polish. Let me go
- 5:11ahead and rinse this off. Giving it a
- 5:12couple minutes does it change anything?
- 5:38I think it's helped a little bit, but
- 5:40now I'm just going to give it a couple
- 5:41of minutes. We're going to leave the
- 5:43camera rolling. I know it's boring.
- 5:45But let's see if we let it sit a little
- 5:47bit, let it cross-link a little bit,
- 5:49does it get better with hydrophobic
- 5:51properties? Right now, it's not bad.
- 5:54I'd like it to be a little bit more
- 5:55impressive right on the initial
- 5:56application. But this is a retail level
- 5:59product. They probably don't want people
- 6:01having issues with standing with some of
- 6:03these products. So, it might be a little
- 6:05bit on the light side. But when I see
- 6:06products that are on the light side,
- 6:08meaning there's not a high concentration
- 6:10of it, you just need to wait sometimes
- 6:12within a couple of hours what you
- 6:14thought was a loser product, couple of
- 6:16hours later you hit it with water and
- 6:18you go, "Oh my god, it's pretty
- 6:19hydrophobic." That's because the product
- 6:21needed to cure a little bit on the
- 6:23surface of the paint. Let's see if we
- 6:25get any little bit better of a
- 6:26hydrophobic nature just sitting here
- 6:28talking for a minute or so.
- 6:37Yeah.
- 6:45Yeah, if you notice the beads are
- 6:46getting better, folks. This This product
- 6:48just needs a little bit more time to
- 6:50cure. I bet you if I come back tomorrow
- 6:53and hit this panel, I'm just going to
- 6:55dry it for now, but if I hit that panel
- 6:56tomorrow, it's going to be much more
- 6:58hydrophobic. Why? Because on a retail
- 7:00level, they kind of dummy dummy these
- 7:02down a little bit so you don't get any
- 7:04staining of the paint. But they need a
- 7:06little bit more time to cure. I think
- 7:08it's a winner. I'm going to give it two
- 7:10thumbs up. A lot of you guys might use
- 7:11it for the first time and immediately
- 7:13have an impression of it like, "Oh, it's
- 7:15no good." But give it time. The beading
- 7:17that's starting to show up on the panel
- 7:19is pretty impressive. Let's get a little
- 7:21closer in there so you guys can see it.
- 7:23And I'll hit it again with some water.
- 7:50>> Actually, folks, that's pretty good.
- 7:51I've got no problem with that at all.
- 7:53Can you guys see that? I'll back it up
- 7:54and then hit it with water again.
- 8:05Yeah, that's [snorts] actually pretty
- 8:06good, folks. As this sits on the panel a
- 8:09little bit longer to to get more
- 8:10hydrophobic. I'm going to dry the car
- 8:12off. I bet you this panel's going to be
- 8:13even more hydrophobic tomorrow. So,
- 8:16here's my verdict of this stuff. I give
- 8:18it two thumbs up. Be careful to judge it
- 8:20on initial application and rinse. You're
- 8:23going to need to let it cure a little
- 8:24bit. They dummy it down because it's on
- 8:27these shelves, a retail shelf, and
- 8:29again, they don't want people staining
- 8:30their paint with it. The other thing is
- 8:33is they tell you to spray it on and
- 8:34rinse it off immediately. If you've got
- 8:36some common sense, it's okay to leave it
- 8:38on the panel for about 30 seconds or so.
- 8:41That will help with bonding as well.
- 8:43But, there it is. Mothers Ceramic Spray
- 8:45and Rinse Touchless Quick Coat. Folks, I
- 8:48like it. I like the fact that I can walk
- 8:50into AutoZone and get it. And kind of
- 8:52have a nice touch-up on let's say I had
- 8:54a ceramic coated vehicle or I had a
- 8:56ceramic wax on the car. This stuff is
- 8:59great. The fact that we can all buy it
- 9:00at AutoZone. Mothers, thanks for making
- 9:02this available on a retail level. Again,
- 9:04all of you guys are just going to need
- 9:06to wait a little bit to for it to cure.
- 9:08Maybe you want to let it sit on the
- 9:10paint for about 10, 15, 30 seconds
- 9:12before you rinse it off. That's going to
- 9:13help. But, you're going to get something
- 9:15from it, and I think it's worth the
- 9:16money. It's at AutoZone. Go check it
- 9:18out.
About this transcript
This page contains the full transcript of Mothers Ceramic Spray & Rinse: Don't Judge Too Quickly! by Dallas Paint Correction & Auto Detailing, generated from the public captions YouTube serves with the video. The transcript has 1,670 words across 231 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.