Material Type Configuration and Number Range in SAP MM explained — Transcript
Full transcript
- 0:00Hey everyone, welcome back to my
- 0:01channel. So in today's video, we learned
- 0:03about the material master configuration
- 0:05in SAPMM. In our last video, we learned
- 0:08about the material master maintenance
- 0:10from an end user perspective. In today's
- 0:13video, we'll learn about the material
- 0:15master configuration. And in this first
- 0:17part, we'll understand about the
- 0:19material type configuration and the
- 0:22number range assignment. We'll see what
- 0:24is material type in detail and we'll see
- 0:26how we can define and assign the number
- 0:29ranges to each material type. So let's
- 0:32start. So to go to material master
- 0:33configuration we'll go to SPRO
- 0:36SAP reference img
- 0:39logistics general
- 0:41material master and here you can see we
- 0:44have basic settings and under the basic
- 0:47setting the first configuration that
- 0:48we'll see is the material type
- 0:50configuration. So to see the material
- 0:53types configuration we have to go to
- 0:54define attributes of material types. So
- 0:57let's go to this link.
- 1:00So you can see here you have all the
- 1:02list of material types which is existing
- 1:03in the system. So to see the standard
- 1:06material type we'll click on this
- 1:07position. We'll enter RO.
- 1:10So you can see material type Ro is the
- 1:13standard material type for raw
- 1:14materials. In our previous video we
- 1:16already have discussed the significance
- 1:18of material types. what all different
- 1:20standard material types are there in the
- 1:22system and what all control functions
- 1:24are there for material types. In today's
- 1:26video we are seeing the details of those
- 1:28configurations.
- 1:29So to see the detail of any material
- 1:31type either we can select it and click
- 1:33on this particular icon here or you can
- 1:35double click on that particular material
- 1:37type. So let's click on this icon. So
- 1:39you can see in this screen you have all
- 1:42the control functions of a particular
- 1:44material type. You can see the material
- 1:46type key is ro here and the description
- 1:49of the material type is mentioned here.
- 1:51Then you have a field called product
- 1:53type group. Now this particular field
- 1:55basically tells the system that whether
- 1:57this particular material type
- 1:59corresponds to a material or a service.
- 2:01In S4 HANA you can use something called
- 2:03as lean service procurement. In that
- 2:05process we use this particular field
- 2:07called product type group. So you can
- 2:09see if you take a drop-down if you
- 2:11select blank or one it corresponds to
- 2:13material and entry two is for service.
- 2:17So for the particular material type
- 2:18which is for service procurement you
- 2:20will find this particular product type
- 2:22group as two. Let's first see that. So
- 2:24we'll go back and if you enter material
- 2:27type as strv
- 2:29and if you double click here you can see
- 2:31forv the product type group is two. And
- 2:34this particular special material type is
- 2:36used for lean service procurement. Okay,
- 2:38this is a special functionality which is
- 2:40available in S4 HANA. Here you have to
- 2:42maintain this product type group S2 and
- 2:45then you can use this in that particular
- 2:47process. Okay, so let's go back and
- 2:50again we'll open Ro.
- 2:55So you can see in this particular
- 2:57configuration screen you have multiple
- 2:59sections. You have a section for general
- 3:01data. Then special material types, user
- 3:04departments, internal or external
- 3:07purchase orders, classification,
- 3:10valuation, quantity or value updating
- 3:13and retail specific fields. Now all
- 3:16these sections correspond to specific
- 3:18configuration for any material type. So
- 3:20we'll see all these sections one by one.
- 3:22So you can see you have first section
- 3:23for general data. So here you have
- 3:26something called as field reference and
- 3:28screen reference. Now what is a field
- 3:30and screen reference? The field
- 3:31reference basically is used to control
- 3:34the field selection of your material
- 3:36master. Okay, you'll have multiple
- 3:38fields in the material master which you
- 3:40can control by using this field
- 3:43reference. That is you can make any
- 3:44field as optional, mandatory, display or
- 3:47hidden. That particular control is
- 3:49configured through this field reference
- 3:52for material type. Then you have
- 3:54something called a screen reference. Now
- 3:56whenever you will be creating your
- 3:57material master multiple screens will
- 4:00come up. So what all screens are
- 4:01presented to the end user and in which
- 4:04sequence those screen will come is
- 4:06controlled by this screen reference for
- 4:08material type. Okay. So we'll see these
- 4:10two configuration in detail when we'll
- 4:12learn about the field selection and
- 4:14screen sequence settings. There we'll
- 4:16see how these fields control your field
- 4:18selection and screen sequence settings.
- 4:20Okay. Then you have a field called
- 4:22authorization group. So you can control
- 4:24through particular authorization objects
- 4:26that whether a user will be authorized
- 4:28to create a particular material or not.
- 4:31So based on this particular entry in
- 4:33this authorization group, you will allow
- 4:36or disallow a user to create material
- 4:38with this material type. Okay. So this
- 4:40is that authorization group. Then you
- 4:43have crossplant material status. So
- 4:45we'll see this configuration later that
- 4:46how you can assign statuses to a
- 4:48material master and that particular
- 4:51status can either be at plant level or
- 4:54at crossplant level that is at client
- 4:56level. So this particular field will be
- 4:58defaulted in your material master if you
- 5:00create material through this material
- 5:02type. You can see you'll have multiple
- 5:03inputs in this crossplant material
- 5:05status field. Here if you maintain any
- 5:07entry then that entry will be defaulted
- 5:10to your material master. Then you have
- 5:12item category group. This is also a
- 5:14master data which is used in the ST
- 5:16process. So you can default this item
- 5:18category group through this material
- 5:20type configuration. So whenever you
- 5:22create any material with this material
- 5:23type, this item category group will be
- 5:26defaulted. Okay. Then you have something
- 5:28called as quantity structure. This
- 5:30particular setting is used for costing
- 5:32purpose that whether your costing will
- 5:33be with quantity structure or without
- 5:35quantity structure. So that particular
- 5:38setting is controlled here. Then you
- 5:40have initial status for batch and
- 5:42external number assignment without
- 5:44check. Now if you activate this checkbox
- 5:46then if you enter any number externally
- 5:49then system will not check whether it is
- 5:51lying within your allowed number range.
- 5:53Then you see you have a special section
- 5:55for special material types. So as we
- 5:57discussed in our previous video we have
- 6:00material types created for special
- 6:02business transactions or special
- 6:04business functions. So those business
- 6:06functions can only be utilized if you
- 6:09have activated these settings here. So
- 6:11for example, you have settings for
- 6:13configurable material, pipeline
- 6:15material, then manufacturer part
- 6:17material and so on. So if you want to
- 6:19use for special business transaction,
- 6:22then you must activate this checkbox. So
- 6:24for example, if you see the material
- 6:26type for pipeline, let's go to that
- 6:27particular material type. So the
- 6:29material type is pipe. Here we'll press
- 6:31enter. And if you select this particular
- 6:33material type and go to the details, you
- 6:35can see for material type pipe, this
- 6:37particular checkbox has been activated.
- 6:40So all these check boxes are for special
- 6:42business functions which you can assign
- 6:44to special material types. Okay. So this
- 6:47pipe material type is a special material
- 6:49type which is used for pipeline material
- 6:51process. There we have this checkbox
- 6:54activated. We already have video on this
- 6:57particular process that is pipeline
- 6:58procurement. You can see that video and
- 7:00find out about the pipeline procurement
- 7:02process in detail. Okay. Now let's go
- 7:05back again and go to this RO material
- 7:07type.
- 7:14Now we have understood about this
- 7:16section. Now let's see this particular
- 7:18section. Now as we discussed in our
- 7:20previous video, whenever you will be
- 7:22creating the material code, first thing
- 7:24that you will have to enter is industry
- 7:26sector and the material type. And in the
- 7:28next screen system will present you with
- 7:30a list of all the views which you have
- 7:32to select against which you have to
- 7:34maintain the material master record.
- 7:37Those views basically correspond to
- 7:39multiple departments. And for a
- 7:42particular material type what all views
- 7:44will be proposed on the screen is
- 7:47configured in this particular section
- 7:49here. And you can see the name of this
- 7:50section is user departments. And
- 7:52whatever user departments or views you
- 7:54select here will only be proposed on the
- 7:57screen. So you can see the production
- 7:58resources or tools has not been
- 8:00selected. Warehouse management has not
- 8:02been selected. So these views will not
- 8:04be presented on the screen when we
- 8:07create material master with material
- 8:09type ro. Let's see that. So we'll go to
- 8:12mm01 first
- 8:16and we'll enter here ro
- 8:20and we'll press enter.
- 8:22Now you see you do not have warehouse
- 8:24management view available here. If we
- 8:26scroll down also you can see the
- 8:28warehouse management view is not
- 8:30available in this particular window.
- 8:33Okay. Now why that particular view is
- 8:35not available? Because if you go to the
- 8:37material type configuration you can see
- 8:39the warehouse management has not been
- 8:41selected. Also the production resources
- 8:44or tools has not been selected here. So
- 8:46if you again go to this particular
- 8:48screen you will not find that particular
- 8:50view appearing here. If you go up also
- 8:52you will not find that particular view
- 8:54that is production resources or tools.
- 8:56So depending upon the type of material
- 8:59which you are creating you can select or
- 9:01deselect the views which will be
- 9:03presented on the screen through this
- 9:05particular configuration. Okay. So
- 9:08whatever views are presented to you when
- 9:10you create a material master with this
- 9:12material type is configured in this
- 9:14particular section. Okay. Then you have
- 9:17this section internal or external
- 9:19purchase orders. So as we discussed in
- 9:21our previous video also material type
- 9:23control the internal or external
- 9:25procurement for the particular material
- 9:28master. Now what is internal and
- 9:30external procurement? Internal
- 9:31procurement means that whether you can
- 9:34create production order or not. External
- 9:36procurement means whether you can create
- 9:39purchase orders or not and you can see
- 9:42that particular configuration is
- 9:44available here. So you can see for
- 9:46external purchase order the setting is
- 9:48two that means external purchase orders
- 9:50are allowed. Now if you go to this
- 9:52internal purchase order you can see
- 9:54internal purchase orders are also
- 9:56allowed. So for material type ro you can
- 9:59also create a production order and a
- 10:02purchase order. Okay. So this is how
- 10:05this particular setting has been done.
- 10:07We'll create a custom material type and
- 10:09see how this particular setting affects
- 10:11your creation of purchase order. Okay.
- 10:14Then you have something called as
- 10:16classification. So whenever you create a
- 10:18material master, you can assign class
- 10:20and characteristic to that particular
- 10:22material master. Let's say that you want
- 10:25to create a material master and enter
- 10:27specification of that material master
- 10:29through class and characteristic
- 10:30methodology. Then you can enter a class
- 10:34type and class here which will be
- 10:36defaulted whenever you will create the
- 10:38material master through this particular
- 10:40material type. So this is to default the
- 10:43class type and class in your material
- 10:45master. Whenever you create that
- 10:47material master through this material
- 10:49type then you have this very important
- 10:52section here which is called valuation.
- 10:55Now as we discussed earlier also
- 10:57material type plays a very important
- 10:59role in the material valuation that is
- 11:03what is the price control what is the
- 11:05account category reference and whether
- 11:07this price control is mandatory or not.
- 11:10Now let's understand all these three
- 11:12fields here. So the first field is price
- 11:14control. Now what does this field mean?
- 11:16This field basically controls what type
- 11:19of valuation will be there for your
- 11:21material. And you can see you have two
- 11:23options available here. One is the
- 11:24standard price and another one is the
- 11:27moving average price. Now what is the
- 11:29difference? Standard price means that
- 11:32you will enter a price in the material
- 11:34master. Whenever you do any goods
- 11:36receipt, system will not take the price
- 11:38from your purchase order. System will
- 11:41always post the material inventory at
- 11:44the standard price that you have entered
- 11:46in the material master. Okay. So let's
- 11:48say that you have entered a standard
- 11:50price as 100 rupees and you have created
- 11:52a purchase order for 120 rupees. If you
- 11:55do goods receipt system will post the
- 11:58inventory value considering 100 rupees
- 12:00only that is the material master
- 12:02standard price and the differential
- 12:04value system will post to something
- 12:06called as price difference account.
- 12:09Okay. But if you have maintained the
- 12:12price control as moving average price
- 12:14then what system will do? system will
- 12:17consider the PO price and will adjust
- 12:19the price of the material accordingly.
- 12:22Basically, system will keep on
- 12:23calculating the average price every time
- 12:26you do a goods receipt or if you do a
- 12:28invoice receipt and change the value
- 12:31during that particular invoice receipt
- 12:33process. We'll see both these price
- 12:35control in detail in our subsequent
- 12:37videos when we learn about the material
- 12:40valuation in detail. But at this stage,
- 12:42you can understand that you have two
- 12:43options for price control. Either you
- 12:46can keep the price control as moving
- 12:48average price or standard price.
- 12:51Normally for raw material we keep this
- 12:53price control as moving average price
- 12:55and for finished good we keep the price
- 12:57control as standard price. We'll see
- 13:00this in detail in our subsequent video
- 13:02when we learn about the material
- 13:04valuation. Then you have something
- 13:06called as account category reference.
- 13:09Now every material type will be assigned
- 13:11to something called as account category
- 13:13reference. In our previous video also we
- 13:16saw that when we were maintaining the
- 13:18accounting view of the material we were
- 13:20given with a list of drop-down for the
- 13:23valuation class field. Let's see that
- 13:25again. So we'll go to mm01.
- 13:30We'll press enter and let's select basic
- 13:32data 1 and accounting one
- 13:37and we'll press enter. Let's enter our
- 13:39plant.
- 13:42Let's enter some description here,
- 13:46unit of measurement
- 13:49and material group.
- 13:51And let's press enter again. So you can
- 13:54see we are in the accounting view and we
- 13:56have a field called valuation class. If
- 13:58we take a drop-down, you can see this
- 14:00list of valuation class which is coming
- 14:02up on the screen. Now this list is
- 14:05controlled by this particular field
- 14:07which is called account category
- 14:09reference. Okay. For any material type,
- 14:12you are not supposed to enter the list
- 14:14of valuation classes which are
- 14:16applicable for that material type. What
- 14:18you will do? You will only enter
- 14:20something called as account category
- 14:22reference and at a separate
- 14:24configuration we will enter what all
- 14:26valuation class lie under this account
- 14:30category reference. I'll just show you
- 14:32that also. We'll go to SPRO
- 14:36SAP reference img materials management.
- 14:40We'll go to valuation and account
- 14:42assignment.
- 14:43We'll go to account determination
- 14:46and here you can see define valuation
- 14:48class. Now if you go to account category
- 14:51reference, you will find the list of all
- 14:52the account category references which
- 14:54are there in your system. And if you go
- 14:56to this material type configuration, if
- 14:59you take a drop-down, you will get all
- 15:01those account category references. So
- 15:03the standard account category reference
- 15:05for RO is triple01. Okay. So this is for
- 15:08reference for raw material. You can see
- 15:10the description is reference for raw
- 15:12material. Now if you again go back to
- 15:14that configuration and if you go back
- 15:16from here now if you go to the valuation
- 15:19class option you can see here you can
- 15:22assign the valuation class to account
- 15:24category reference. Okay. So to filter
- 15:26out this account category reference
- 15:28triple01 we'll go to selection by
- 15:30contents. We'll select account category
- 15:33reference. We'll click on okay. And here
- 15:35we'll enter triple01
- 15:38and we'll click on select. So you can
- 15:41see under account category reference
- 15:43triple01 you have these valuation
- 15:46classes mapped here. And these are the
- 15:49valuation classes which we are getting
- 15:51in the drop-down when we are creating
- 15:53the material master with material type
- 15:55ro. If we again go back to that screen
- 15:58of material creation. Let me just close
- 16:00this again and let me again take a drop
- 16:02down here. You can see this is the list
- 16:04of valuation classes which are presented
- 16:06to the end user. And this list of
- 16:09valuation class is configured here
- 16:11against the account category reference.
- 16:13You can see here and this account
- 16:15category reference is entered in the
- 16:17material type configuration. You can see
- 16:21we have entered account category
- 16:22reference as triple01 here. And that is
- 16:25why in the valuation class field we are
- 16:27getting that list of valuation classes.
- 16:29And this configuration we can do from
- 16:31here also. If you go back you can see
- 16:34you have a material type account
- 16:36category reference combination
- 16:38configuration here. If you click on this
- 16:40particular button system will again send
- 16:42you to that material type configuration
- 16:44only. And that's why you can see system
- 16:46is telling me that data is locked. If
- 16:48you click on yes you can see this
- 16:49particular setting can be done from here
- 16:52also. And this is basically the setting
- 16:54which is available in the material type
- 16:56also. You can see here in the material
- 16:58type you can assign this account
- 17:00category reference. Okay. Then we have
- 17:03this third option available which is
- 17:05price control mandatory. Now what does
- 17:07this checkbox do? Basically for a
- 17:09material type you enter a price control
- 17:12and then select this checkbox. Then if
- 17:14you create a material with this material
- 17:16type system will not allow you to change
- 17:19the price control on the material
- 17:21creation screen. Let us see that. So
- 17:24again if you go to the material creation
- 17:26screen you can see here you are creating
- 17:28the material. You can see this price
- 17:30control field is grayed out. I cannot
- 17:33change this field here. And why this
- 17:36field is grayed out because I have
- 17:38selected this checkbox telling the
- 17:40system that price control is mandatory.
- 17:43That is whatever price control you have
- 17:46entered in the material type
- 17:48configuration will be defaulted in the
- 17:50material master during material master
- 17:52creation and that price control you will
- 17:56not be able to change on the material
- 17:58creation screen that is the end user
- 18:01will not be able to change the price
- 18:03control field in the material master and
- 18:06you can see when I'm creating this
- 18:07material master I cannot change this
- 18:10price control field here okay so this is
- 18:13the significance of this particular
- 18:15checkbox. Then you have this particular
- 18:17section available here. Now this section
- 18:20basically tells the system whether your
- 18:23material is evaluated or nonvaluated or
- 18:27non-stock material that is whenever you
- 18:30will do a goods receipt or a goods issue
- 18:33whether system will update the quantity
- 18:36or the value or both. This particular
- 18:39setting we have discussed in detail in
- 18:41our valuated, nonvaluated and non-stock
- 18:44material video. I will keep the link in
- 18:46the description of this video. You can
- 18:48watch that video to find out the detail
- 18:51about this quantity and value updating
- 18:53control. And you can see for each of
- 18:55these updating you have three options
- 18:58for quantity updating and value updating
- 19:01you have in all valuation areas, in no
- 19:03valuation area and by valuation area.
- 19:06Now the valuation area configuration
- 19:08also I have discussed in that video that
- 19:10how you can configure your valuation
- 19:12area as a plant or a company code. Now
- 19:15in almost all the organizations the
- 19:17valuation areas are configured as plant
- 19:20only. So you can understand here that
- 19:22valuation area basically stands for
- 19:24plant. Okay. So for quantity updating
- 19:27you have in all plants, in no plant and
- 19:30by plant. And for value updating also
- 19:33you have in all plant in no plant and by
- 19:36plant. And if you have selected by
- 19:38valuation area or by plant then you have
- 19:41to enter for each of the plant or the
- 19:43valuation area what is this
- 19:45configuration. So if you have selected
- 19:47this checkbox then you have to go to
- 19:49this particular folder here and you can
- 19:51see for each valuation area or for each
- 19:54plant you can have this particular
- 19:57setting available here. So you can have
- 19:59quantity and value updating
- 20:01configuration based on plant also. And
- 20:04for that you have to select this
- 20:06particular checkbox here. You can see
- 20:08this checkbox is by valuation area. That
- 20:10is for each valuation area you can have
- 20:13configuration for quantity updating and
- 20:15value updating. And if you see the
- 20:17standard material type or nonvaluated
- 20:19material then you will find this
- 20:22particular setting changed there. Let's
- 20:24see that. So we'll go back and we'll
- 20:27select the material type UNBW.
- 20:30You can see UNBW is for nonvaluated
- 20:32material. If you double click this you
- 20:34will see quantity updating is by
- 20:36valuation area but value updating is in
- 20:39no valuation area. That is if you create
- 20:42a material with this material type then
- 20:44it will be treated as a nonvaluated
- 20:47material. When you will create the GR
- 20:49system will update the quantity but
- 20:51system will not update the value. And if
- 20:53you go to the configuration of non-stock
- 20:55material that is material type NL A
- 20:59and if you double click here you will
- 21:01find that this quantity and value
- 21:02updating has been configured that this
- 21:05quantity and value updating will not
- 21:07happen in any valuation area. So you can
- 21:09see quantity updating is selected in no
- 21:12valuation area and value updating also
- 21:14is selected in no valuation area. So if
- 21:17you create a material with material type
- 21:18NLAG and if you do GR then system will
- 21:21not update the quantity and the value
- 21:24both. Okay. Now if you want details on
- 21:26this valuated, nonvaluated and non-stock
- 21:29material then I'll highly recommend you
- 21:31to watch that video on our channel where
- 21:33I have discussed all these three
- 21:35materials in detail. Okay. Now let's go
- 21:37back and again let's go to the ro
- 21:39material type.
- 21:44So we have discussed all these sections
- 21:47that is general data, special material
- 21:49types, user departments, internal or
- 21:51external purchase orders,
- 21:52classification, valuation and quantity
- 21:55and value updating. So in this way we
- 21:57discussed all the major configurations
- 21:59which are available for the material
- 22:00type. Now you can verify other material
- 22:02types also and see what all changes
- 22:04happen when we change the material type.
- 22:07So if you go to the finished good.
- 22:10So we'll go to fert. So you can see fit
- 22:13is the standard material type of
- 22:14finished code. If you double click here,
- 22:16you can see here that external purchase
- 22:18order has an entry one here. If you take
- 22:20a drop-down, you will find one is for
- 22:22external purchase orders allowed but
- 22:24warning issued. That is if you are
- 22:26creating a purchase order for finished
- 22:28good then system will give you a warning
- 22:31message that this is a finished good.
- 22:33Normally it is produced within the
- 22:36organization but if the end user is
- 22:37creating a purchase order then system
- 22:40will give a warning. And for internal
- 22:42purchase order you can see this will be
- 22:44allowed. That is you can create
- 22:46production orders and then receive this
- 22:48material in your inventory. And you can
- 22:50see in the valuation section price
- 22:52control is selected as standard price.
- 22:55Okay. So as we discussed earlier raw
- 22:57materials are managed at moving average
- 22:59price and finished goods are managed at
- 23:02standard price because finished good you
- 23:04will be producing inhouse and you will
- 23:06be deciding the price of that material.
- 23:09Okay. And that particular price will be
- 23:11maintained as a standard price. And you
- 23:13can see the account category reference
- 23:15is also different from what was
- 23:17maintained in the material type ro that
- 23:19was for raw materials. So if you take a
- 23:21drop down this09 stands for reference
- 23:24for finished products and this
- 23:26particular account category reference
- 23:28will be attached to a different set of
- 23:30valuation classes. And if you create a
- 23:33material with this material type, then
- 23:35if you take a drop-down in the valuation
- 23:37class field, you will be presented with
- 23:39a different set of valuation class.
- 23:43Let's see that. So let's go to mm01
- 23:45again.
- 23:52And this time we'll select fert here.
- 23:56We'll press enter. We'll select basic
- 23:58data one and accounting one.
- 24:04We'll press enter. Let's enter the
- 24:06plant. Let's again press enter.
- 24:10Let's enter some description here,
- 24:16unit of measurement and the material
- 24:19group. And let's press enter again. Now
- 24:22you see you have price control as S
- 24:25here. Now why this price control S is
- 24:28coming? Because if you go to the
- 24:30material type configuration, you can see
- 24:32this price control has been selected as
- 24:35standard price here. And because of
- 24:37this, when we are creating the material
- 24:39code with material type fertm01
- 24:48screen also. Now why this is happening?
- 24:51Because again if we go to this material
- 24:53type configuration, this price control
- 24:55mandatory checkbox has not been
- 24:57selected. So the end user has the option
- 25:00to change the price control field while
- 25:03creating the material with this
- 25:05particular material type. Okay. So you
- 25:07can see here when I'm creating this
- 25:09material, I can change this price
- 25:11control from S to V also. Okay. And you
- 25:14can see if we go to this valuation class
- 25:16and take a drop-down, you will find a
- 25:18different set of valuation classes. If
- 25:21you again go back to the mm01 for raw
- 25:23material
- 25:26and if you take a drop-down here you can
- 25:28see you had these valuation classes and
- 25:31if you go to the finished good creation
- 25:33screen you can see you have this list of
- 25:36valuation class. So why you are getting
- 25:39a different list of valuation classes
- 25:41because for this material type the
- 25:43account category reference is different.
- 25:46You can see here the account category
- 25:47reference is triple09
- 25:50and earlier for raw material the account
- 25:52category reference was triple01. And if
- 25:54you again go to the configuration for
- 25:56valuation classes if you go back from
- 25:58here we'll go to the valuation class
- 26:00button here and again we'll go to
- 26:02selection by content and here we'll
- 26:04enter triple09.
- 26:07We'll click on select. So you can see
- 26:09this list of valuation class which is
- 26:10mapped to the account category reference
- 26:12triple09 is coming in the drop-down when
- 26:15I'm creating material for material type
- 26:18fert. Okay, you can see here 09 is
- 26:22assigned to these valuation classes and
- 26:24this triple09 is entered in the material
- 26:27type configuration here. So you can see
- 26:30how different material types are
- 26:32associated to different control
- 26:34functions through this material type
- 26:36configuration and how during material
- 26:39master creation all these control
- 26:41functions play a vital role in deciding
- 26:44the fields of your material master
- 26:47record. So in this way we have covered
- 26:48this whole configuration of material
- 26:50type. Now let's create a custom material
- 26:53type and see how we can change these
- 26:55settings and how the material master
- 26:57creation screens are changed. Okay. So
- 26:59now let's see how we can create our own
- 27:02custom material type. So let's say that
- 27:04we have to create a custom material type
- 27:06for our raw materials. So what we'll do,
- 27:08we will copy the configuration of the
- 27:10standard material type and then we'll
- 27:12make changes to that particular
- 27:14configuration. So always remember that
- 27:16whenever you have to create a custom
- 27:18material type, you have to select
- 27:21appropriate standard material type and
- 27:24copy the configurations from there.
- 27:26Okay. So what we are doing now, we are
- 27:28creating a custom material type for our
- 27:30raw materials. So we'll go back from
- 27:32here.
- 27:34We'll go to the ro standard material
- 27:36type. We'll select this material type
- 27:39and we'll click on the copy button here.
- 27:42Now we'll enter the key for our custom
- 27:44material type. So we'll enter Y R H
- 27:48and we'll enter raw materials custom.
- 27:57We'll click okay.
- 27:59Now again we'll go to yoh
- 28:02and let's say that for this material
- 28:04type I do not want the sales related
- 28:07views to come up on the screen. That is
- 28:09this is a raw material type which I'll
- 28:11not be selling to anyone. So for that
- 28:13what we have to do we have to deselect
- 28:16this sales view here or this sales
- 28:18department here. Okay. So what we have
- 28:20done we have deselected this user
- 28:23department sales from here and let's
- 28:25save this material type
- 28:29and now let's create a material master
- 28:31through this new material type. So we'll
- 28:33go to mm01
- 28:37and we'll select material type as y.
- 28:40Okay. So you can see y ro is the custom
- 28:43material type which we have created. Now
- 28:45if we press enter you will see that the
- 28:48sales related views are not coming on
- 28:50the screen. If you scroll down also you
- 28:53can see the sales related view are not
- 28:55appearing. Okay. If you again go to the
- 28:57ro material master creation screen
- 29:01let's go back from here
- 29:04and again let's go to mm01
- 29:07and let's select ro and let's press
- 29:10enter. You can see we have these three
- 29:12views appearing on the screen that is
- 29:14for sales that is sales organization
- 29:15data 1, sales organization data 2 and
- 29:18sales general or plan data. These three
- 29:21views are coming because in the material
- 29:23type ro configuration the sales user
- 29:26department has been selected. But in our
- 29:29yoh we have deselected that user
- 29:31department. So if you go to this create
- 29:33material screen for our new material
- 29:35type you can see you are not finding
- 29:38those three views appearing here which
- 29:40are applicable for sales related
- 29:43activities. Okay. So through this user
- 29:46department configuration you can control
- 29:48what all views are coming on the screen.
- 29:51So now let's save this configuration.
- 29:53Now let's create a custom material type
- 29:55for our finished good and we'll change
- 29:57the configuration in this particular
- 29:59section. So again we'll go back
- 30:02again we'll go to the material type
- 30:04configuration. We'll select fert
- 30:08and we'll select this and we'll click on
- 30:10copy and let's enter y here
- 30:16and we'll enter finished good custom.
- 30:20We'll press enter.
- 30:26And now we'll open this YERT
- 30:28configuration.
- 30:30And here for external purchase order,
- 30:32let's select zero here. So this is for
- 30:34no external purchase order allowed. So
- 30:37we'll select zero here. And we'll save
- 30:38this material type. Now let's create a
- 30:40material with this material type. So
- 30:42we'll open a new screen. We'll go to M01
- 30:47and we'll select YERT here and we'll
- 30:50press enter. We select basic data 1
- 30:54purchasing
- 30:56storage one and accounting one. We'll
- 30:59enter our plant
- 31:02and the storage location.
- 31:04We'll press enter.
- 31:06Let's enter a description.
- 31:13Let's enter unit of measurement
- 31:17and a material group.
- 31:19Let's press enter. Let's press enter
- 31:22again.
- 31:24And again we'll press enter. And we'll
- 31:26go to accounting one. And here we'll
- 31:28enter the valuation class.
- 31:30And let's enter a standard price here.
- 31:37And let's save this material master. So
- 31:40you can see we have created this
- 31:42material code with material type Y A R.
- 31:45Now let's create a purchase order and
- 31:47see how system behaves. So we'll go to
- 31:49ME21N.
- 31:54We'll enter a vendor
- 31:56and we'll enter the material code that
- 31:58we just created now. And we'll press
- 32:00enter.
- 32:04Let's enter our plant.
- 32:09Now you can see system gives me an error
- 32:12that external procurement not defined
- 32:14for material 206. Now why this error is
- 32:17coming? Because in the material type
- 32:20configuration I have entered that
- 32:23external purchase orders are not allowed
- 32:25for the material which belongs to this
- 32:28material type. If you again go to this
- 32:30configuration, you can see for y I had
- 32:33selected external purchase order as zero
- 32:36here. that stands for no external
- 32:38purchase orders allowed and hence when
- 32:40I'm creating the purchase order system
- 32:43is giving me this error that external
- 32:45procurement not defined for material
- 32:48206. So in this way you understood that
- 32:51for a material type you can allow or
- 32:53disallow internal procurement and
- 32:56external procurement. Internal
- 32:58procurement means creation of production
- 33:00order. External procurement means
- 33:02creation of purchase order. Okay. One
- 33:05more thing we'll do, we'll go to this
- 33:07material type configuration and we'll
- 33:09select this checkbox also. And now let's
- 33:12save this material type configuration.
- 33:14Now let's again create a material with
- 33:16this material type. So we'll go to mm01.
- 33:20And we have this material type selected
- 33:22here. Let's press enter. Let's select
- 33:24basic data one and accounting one only.
- 33:26This time
- 33:30let's enter plant.
- 33:33We'll enter some description,
- 33:35unit of measurement and material group
- 33:40and we'll press enter. And you can see
- 33:42this time for this material type I
- 33:45cannot change the price control entry
- 33:47here. That is I cannot change this price
- 33:49control from S to V. You can see here S
- 33:51is for standard price and V is for
- 33:53moving average price. But I cannot
- 33:56change it here. Now why this is
- 33:57happening? because for this material
- 33:59type I have selected this particular
- 34:01checkbox here. Okay. So in this way we
- 34:04saw how you can create the custom
- 34:06material types and how you can change
- 34:08the configuration as per your
- 34:10requirement. Now let's see what is the
- 34:12meaning of number range and how we can
- 34:15create and assign number ranges for
- 34:17various material types. So let's see
- 34:19that. So before we see the configuration
- 34:21for number ranges first let's understand
- 34:24what is the meaning of number range. So
- 34:26as you saw that when we were creating
- 34:28the material with these material types
- 34:30system was automatically assigning a
- 34:33number to our material master. Let's see
- 34:35that again. So again we'll go to MM01.
- 34:43We'll go to MM01
- 34:46and we'll select material type as Ro and
- 34:48let's press enter. We'll select basic
- 34:51data one and let's press enter again.
- 34:54And you can see system assigns a number
- 34:57to my material master. You can see
- 34:59automatically this number was assigned.
- 35:02Now this number is starting with digit
- 35:04three and it has 10 digits in its
- 35:06material number. So this auto assignment
- 35:09of this number and this particular range
- 35:12for this number is configured through
- 35:14something called as number range. Okay.
- 35:17So in the system we have two types of
- 35:19number ranges. One is called internal
- 35:22number range and another one is called
- 35:24external number range. Now what is the
- 35:27difference between these two? And
- 35:28internal number range means that system
- 35:31will automatically assign a number to
- 35:34your material master and this number
- 35:37will always be numeric in nature. That
- 35:40is each character of this number will be
- 35:44numeric. You can see all these 10
- 35:45characters in this particular material
- 35:47number is numeric. So this internal
- 35:49number range means that system will
- 35:51assign a numeric entry to your material
- 35:55number. Okay. Now for external number
- 35:57range system will not assign any number
- 36:00to your material master. You will be
- 36:03entering that material number externally
- 36:06in the mm01 screen. Let's go to MM01.
- 36:12You can see you have a field for
- 36:13material. Now this field is basically
- 36:16for all the material types which are
- 36:19assigned to the external number range
- 36:21that is the end user will be entering
- 36:24the material externally and this time
- 36:26you can enter a numeric entry or a
- 36:29non-numeric entry also. So this
- 36:33particular number range is very
- 36:34important in your organization.
- 36:37If you want that the end user should
- 36:40enter its own material number in the
- 36:42material master record then you must
- 36:45have an external number range
- 36:47assignment. If you want that user should
- 36:50not enter any number and system should
- 36:53assign a material number to your
- 36:55material master then you must have a
- 36:57internal number range assignment. And if
- 37:00you want both these options that is user
- 37:03is also allowed to enter the material
- 37:05number in this screen or if user does
- 37:07not make any entry in this screen and
- 37:09simply press enter and then enter the
- 37:12details. System should assign a number
- 37:14range internally then that option is
- 37:17also available that is for any material
- 37:20type you can have internal and external
- 37:23number range both. We'll see how this
- 37:25configuration is done and how this
- 37:27internal and external lumber range
- 37:29assignment affects your material
- 37:31creation process. Okay. So let's see
- 37:34that. So we'll go back from here. We'll
- 37:35again go back and you can see under
- 37:38material types configuration you have
- 37:40this link for define number ranges for
- 37:43each material type. So you have to
- 37:45understand that number ranges are
- 37:48assigned to the material types. So
- 37:50whenever you select a material type
- 37:52system automatically understands what
- 37:55kind of number range assignment is there
- 37:57that is whether internal or external
- 37:59number range or both are allowed for
- 38:01your material type and what is the range
- 38:04under which the number is to be entered
- 38:06either by the system or externally by
- 38:09the end user. Okay, these two things
- 38:12system decides automatically when you
- 38:15select the material type. Okay. So let's
- 38:17go to this link here and you can see you
- 38:21have these three buttons available here
- 38:23that is display intervals, change
- 38:25intervals and change NR status that is
- 38:28change number range status and you have
- 38:32number range object as material NR that
- 38:35is for material master number range. Now
- 38:38this whole number range is a two-step
- 38:40process. As I told you a material type
- 38:42can be assigned to internal and external
- 38:45number range both. So first you create a
- 38:47number range group and then you can
- 38:50assign a internal number range and a
- 38:53external number range and that number
- 38:56range group you will assign to your
- 38:58material type. Now if you want your
- 39:00material type to only have internal
- 39:02number ranges then you have to create a
- 39:05group under which you must maintain only
- 39:08the internal number range interval. If
- 39:11you want your material type to have only
- 39:13the external number range then you must
- 39:15create a group and add only the external
- 39:18number range interval to that group. If
- 39:21you want both these internal and
- 39:23external number range for your material
- 39:25then you have to create a number range
- 39:27group where you will assign both these
- 39:30intervals that is internal number range
- 39:32interval and external number range
- 39:35interval. Okay. So to display all the
- 39:37number range intervals which are
- 39:39existing in the system we have to click
- 39:41on this button here that is display
- 39:42intervals and you can see for every
- 39:45number range interval you will have a
- 39:48number range number and you have from
- 39:51and to number. Okay. So you can see for
- 39:54number range 01 you have from number and
- 39:57a to number and whenever you will create
- 40:00a material master with a material type
- 40:03which is assigned to this number range
- 40:05system will automatically pick a number
- 40:07within this particular range. Okay. And
- 40:10you can see for each number range you
- 40:12have this particular column available
- 40:14which basically tells whether this
- 40:17number range interval is internal or
- 40:19external. So you can see the name of
- 40:21this column is external. So if you
- 40:23activate this checkbox against any
- 40:25number range interval then that
- 40:27particular number range will be
- 40:29basically for external number
- 40:31assignment. That is for this number
- 40:33range number 02 you have this number
- 40:36range available but you have to enter
- 40:39the number externally in the mm01 screen
- 40:43and system will check whether that
- 40:46number is lying in this particular range
- 40:49or not. Okay. So you can see these
- 40:51number ranges are basically external
- 40:53number range which if you assign to the
- 40:56material type then you will have to
- 40:58enter the number externally in the mm01
- 41:01screen. And you can see we also have a
- 41:03column for NR status. This basically
- 41:06tells that which number is currently
- 41:08assigned to the last material which you
- 41:11created with this number range. Now what
- 41:13we discussed earlier once you create
- 41:16these number range intervals you have to
- 41:18assign them into groups. So how we can
- 41:21assign that? So we have to go back from
- 41:23here and you can see we have this
- 41:25particular icon for change groups. Okay.
- 41:28So for any group you can assign a
- 41:31internal number range interval and
- 41:32external number range interval or you
- 41:35can only assign an internal number range
- 41:37or a external number range interval. And
- 41:40this number range group you assign to
- 41:43the material type. So what we'll do
- 41:45first we will verify what is the group
- 41:47which is assigned to the standard
- 41:49material type ro and then we'll come
- 41:51back to this configuration and see what
- 41:53all number ranges are assigned to that
- 41:56particular group. Okay. So we'll go back
- 41:57from here and you can see we have this
- 42:01particular icon available here to see
- 42:03the overview of this number range group
- 42:05assignments. So if you click this
- 42:07particular button here you can see first
- 42:09you have a group then you have these
- 42:12material types which are assigned to
- 42:14this group and you have this number
- 42:16range which has been assigned to this
- 42:18particular group and you can see for
- 42:20this group only one number range
- 42:22interval has been assigned which is
- 42:24external in nature. Okay. So you have
- 42:26this number range interval which is
- 42:28assigned with external number range
- 42:30assignment. And you can see this group
- 42:33one has both these number range
- 42:36intervals assigned. That is it has an
- 42:38internal number range also assigned and
- 42:41an external number range also assigned
- 42:43to it. Okay. So to see to which group
- 42:45our material type ro has been assigned.
- 42:48We'll click on this particular icon here
- 42:50that is for find. We'll enter ro here
- 42:53and we'll press enter. And you can see
- 42:55here we have our standard material type
- 42:57ro. We'll click this particular entry
- 43:00here. And if you scroll up you can see
- 43:02this ro has been assigned to this
- 43:05particular group and this particular
- 43:07group is assigned to only one number
- 43:10range interval which basically has
- 43:12internal number range assignment. And
- 43:15whenever we'll create a material code
- 43:17with this material type, first system
- 43:19will see that this material type is
- 43:22assigned to this group which has one
- 43:24number range interval which is internal
- 43:26in nature. And hence system will
- 43:29automatically assign a material number
- 43:31in this particular range. And hence when
- 43:34we creating our material with material
- 43:36type ro system was creating a material
- 43:39with 10 digits within this range only.
- 43:42Let's again see that. So again we'll go
- 43:44to mm01.
- 43:48We have selected ro here. Let's press
- 43:50enter. Let's select basic data 1. And
- 43:52you can see this particular material
- 43:53number has been assigned by the system
- 43:56internally. You can see this number is
- 43:58automatically generated. And this number
- 44:00is lying within this range which is
- 44:03assigned to our material type. You can
- 44:05see this number which was assigned
- 44:07automatically by the system is lying
- 44:09within this range here. And you can see
- 44:12you do not have assignment to any number
- 44:15range interval which is external in
- 44:17nature for this particular number range
- 44:19group. So if you try to enter any number
- 44:22externally system will give you error.
- 44:24Let's see that.
- 44:27So again we'll go to me01
- 44:31and let's enter a number externally here
- 44:36and let's press enter. You can see
- 44:38system gives me an error that no
- 44:40external number assignment possible for
- 44:42material type raw materials SAP
- 44:45standard. And why this is happening?
- 44:47Because our material type ro is assigned
- 44:50to this particular group which is
- 44:52assigned to this number range only. And
- 44:55this number range is internal in nature.
- 44:57And how you can verify that? So for that
- 45:00we'll have to go to this material number
- 45:02range group. So we'll go back.
- 45:05We can either click on this icon that is
- 45:07to display groups or we can click on
- 45:09this icon that is for change groups. So
- 45:11let's click on this icon here and here
- 45:13again we'll find our material type ro.
- 45:15So we'll click on this icon.
- 45:19Let's enter ro here and we'll press
- 45:22enter and let's select this particular
- 45:23entry here. So you can see our material
- 45:26type ro is assigned to this particular
- 45:29group. You can see this particular text
- 45:31is for group text and you have this
- 45:34number range interval which has been
- 45:36assigned to this particular group which
- 45:39is assigned to this material type. So
- 45:42let's see this number range interval 36.
- 45:44So we'll go back and we'll click on this
- 45:48button here. And if you scroll down,
- 45:52you can see number range interval 36 is
- 45:55for this number range and it has
- 45:57internal number range assignment because
- 45:59this external checkbox is deselected
- 46:02here. So whenever you create a material
- 46:06code with material type ro first system
- 46:09checks to which group this material type
- 46:12has been assigned. So we can check it
- 46:14from here also. If we again find ro
- 46:20you can see this ro is assigned to this
- 46:22particular group here and this
- 46:24particular group is assigned to this
- 46:26particular number range interval and
- 46:28through that number range interval your
- 46:31number range is decided by the system
- 46:34and this number range 36 corresponds to
- 46:37an internal number range interval. You
- 46:40can see here 36 is for this number range
- 46:42interval and hence when you try to
- 46:44create the material with material type
- 46:45ro system automatically try to assign a
- 46:49number within this range internally. Now
- 46:52let's see how you can assign both
- 46:54internal and external number range to
- 46:56any group and then assign it to your
- 46:59material type and then create the
- 47:01material with internal and external
- 47:04number range assignment both. Okay. So
- 47:06let's go back from here. We'll again go
- 47:08to the overview and you can see this
- 47:11group one is assigned to two number
- 47:14range intervals. First is the internal
- 47:17number range and second one is the
- 47:19external number range. You can see here
- 47:21this particular X is for external. So
- 47:24always remember that for any group you
- 47:27can assign exactly two number ranges.
- 47:30one is internal and another one is
- 47:33external or you can either assign only
- 47:36one internal number range interval or
- 47:38one external number range interval. So
- 47:41you have three options either you assign
- 47:44a single internal number range interval
- 47:46or a single external number range
- 47:48interval or one internal and one
- 47:52external number range interval. Okay.
- 47:54And in this case you can see this
- 47:56particular group has both these
- 47:58assignments. So now we'll assign our
- 48:01custom material type to this particular
- 48:03group and then we'll see how we can
- 48:05create the material with internal number
- 48:07range and external number range both.
- 48:10Okay. So how you can assign a particular
- 48:12material type to a given group. So for
- 48:14that we'll go back.
- 48:18We'll go to change groups here. We'll
- 48:20select our custom material type. So
- 48:21we'll click on this find icon here. And
- 48:24this time we'll enter Y R H here
- 48:28and we'll press enter. So you can see
- 48:30this is our custom material type. So to
- 48:32assign this to a particular group, we
- 48:34have to click on this icon here
- 48:37and we have to assign it to group one.
- 48:40And you can see this group one has two
- 48:42number ranges assigned to it. One is the
- 48:44internal number range and another one is
- 48:47the external number range. And we can
- 48:49verify these number ranges also. So
- 48:52let's first verify that. So we'll open a
- 48:54new screen.
- 48:59We'll again go to SPRO
- 49:02SAP reference img
- 49:04logistics general
- 49:06material master basic settings and again
- 49:09we'll go to define number ranges for
- 49:11each material type and we'll click on
- 49:13interval and you can see these two
- 49:15number ranges are there 01 and 02. 02 is
- 49:19an external number range and 01 is an
- 49:22internal number range. And this group
- 49:24one has been assigned to both these
- 49:27number ranges. This group one is
- 49:29assigned to 01 for the internal number
- 49:31range and 02 for external number range.
- 49:34So now let's assign our custom material
- 49:36type to this group. So we'll click okay
- 49:40and then we'll click on save.
- 49:44Now what we have done we have assigned
- 49:45our custom material type Y RO to group
- 49:48one which has both these number ranges
- 49:51available. If you again go to this
- 49:53number range setting we have 01 and 02.
- 49:56Now let's create the material master
- 49:58through this particular material type.
- 50:02So we'll again go to this mm01 screen
- 50:07and we'll select Y ro
- 50:10and this time we'll not enter any
- 50:12material number externally. We'll simply
- 50:14press enter. Here we'll select basic
- 50:16data one and again we'll press enter and
- 50:18you can see system assigned an internal
- 50:20number to this particular material
- 50:22master. And this number is lying within
- 50:25the range of your material number range.
- 50:27If you go here, we have number range 01
- 50:29for internal number range assignment and
- 50:32it is within this range and system
- 50:34assigned a number within this range
- 50:36only. If you go here, you can see this
- 50:39number has basically seven digits which
- 50:41is starting with 97. And if you go to
- 50:43this number range setting for 01, you
- 50:46have these seven digits which is
- 50:47starting from 97 and system has assigned
- 50:50a number within this particular
- 50:52interval. Okay. Now let's see how we can
- 50:55create a material master with external
- 50:57number with this material type only. So
- 51:00you can see our external number range is
- 51:0202. So we'll enter a number in this
- 51:04range and see how system behaves. So
- 51:06let's go to mm01 again.
- 51:15And for external number range assignment
- 51:17we'll have to enter number here. So
- 51:19we'll go to the setting
- 51:21and let's select this number here
- 51:25and let's enter it in the mm01 screen
- 51:27here and let's press enter. So now you
- 51:31see system allows me to enter number
- 51:33externally also and system will create
- 51:36this material master with this
- 51:38particular number which I entered in the
- 51:40mm01 screen externally. If I press
- 51:43enter, you can see now system will
- 51:44assign this external number range. But
- 51:46this number I must enter in the given
- 51:49range interval only. If I go back
- 51:56and again if you go to M01
- 51:59and if I enter four and all zeros and if
- 52:02I press enter you can see system will
- 52:04give me error that number not defined
- 52:06for material type raw materials custom
- 52:09because I'm not entering this number in
- 52:11this particular range here which is
- 52:13allowed for this external number range
- 52:15assignment. Now let's see how we can
- 52:17create a new number range interval and
- 52:20how we can create a group assign that
- 52:22number range interval to the group and
- 52:24then finally assign that group to the
- 52:26material type. So we can go through the
- 52:28SPR tree also or we can go to T-code
- 52:31MMR.
- 52:32This is for number range interval. So
- 52:34we'll go to T-code MMR. So first of all
- 52:36what you need to do is you need to
- 52:38create a number range group. So we'll
- 52:40click on this particular button here
- 52:42that is change groups.
- 52:44And now we'll click on this particular
- 52:46icon that is for create group. Now you
- 52:49can see you can give a description to
- 52:51this group and then assign a number
- 52:53range number with a number range
- 52:55interval. So we'll enter the group name
- 53:01and here you have to enter the number
- 53:03range number and the interval. Now as we
- 53:06saw earlier we have multiple number
- 53:08ranges already created in the system. So
- 53:11you have to understand that whenever you
- 53:12are creating a new number range
- 53:14interval, it should not overlap with the
- 53:16existing number range intervals. Okay.
- 53:18If you enter any number range interval
- 53:20which is overlapping then system will
- 53:23give you error. So to see what all free
- 53:24number range intervals are available in
- 53:26the system, you can click on this icon
- 53:28here that is for free intervals or you
- 53:30can go to interval and click on free
- 53:32intervals here. So you can see system
- 53:35will give you a information. If you
- 53:37click okay, you can see all these number
- 53:39ranges are free. That is no number range
- 53:42has been created with these intervals.
- 53:44So let us select this one and we'll
- 53:46click on okay. So you can see a new
- 53:50number range is assigned by the system
- 53:52with this number range interval and we
- 53:55are assigning it to this particular
- 53:56group. Now you can see you can add one
- 53:59more number range in this particular
- 54:01group. If you click this particular
- 54:03button here and if you scroll up you can
- 54:05see system has inserted one more line
- 54:07here with this particular checkbox that
- 54:09is external. So as we discussed earlier
- 54:12under a particular group you can create
- 54:14one number range interval for internal
- 54:16number range and another number range
- 54:18interval for external number range. And
- 54:20you can see I no longer have that plus
- 54:22icon here to add new number range
- 54:24interval. So as we discussed under one
- 54:26group you have the option to add one
- 54:29internal number range interval and one
- 54:32external number range interval. So for
- 54:34now what we'll do for this group we'll
- 54:36only use this internal number range. So
- 54:37we'll press enter and we'll save this
- 54:40particular group.
- 54:42So what we have done we have assigned a
- 54:45internal number range interval to this
- 54:48particular group. Now we'll go back
- 54:52and now what we need to do is we need to
- 54:54assign the material type to this new
- 54:57group. Okay. So we'll first go to our
- 54:59material type. So again we'll click on
- 55:00this icon and we'll enter p
- 55:04and we'll press enter. So we have this
- 55:07material type here. Now once we have
- 55:09selected this material type, we have to
- 55:11click on this icon here that says assign
- 55:13element to group. So we'll click on this
- 55:15icon here and here we'll have to select
- 55:18that group that we just created. Now now
- 55:21remember that the group that we created
- 55:22earlier had the number range interval as
- 55:2540. So we'll scroll down and you can see
- 55:27this is that group that we created just
- 55:29now that is the custom group. So we'll
- 55:31select this and we'll click on okay.
- 55:34And now our material type has been
- 55:36assigned to this new group. If we again
- 55:38click on this icon and click okay,
- 55:42you can see this Y ro has been assigned
- 55:44to this custom group. So now we'll save
- 55:46this assignment
- 55:48and now we'll create a material code
- 55:50with this material type and see how
- 55:53number ranges are picked by the system.
- 55:55So we'll go to mm01
- 56:00and we have selected material type as y.
- 56:02Let's press enter and we'll select basic
- 56:04data 1 and again we'll press enter and
- 56:07you can see system assigns this number
- 56:09as per the number range interval which
- 56:12has been assigned to this material type.
- 56:14Let's verify that. So again we'll go to
- 56:16that assignment and we'll go back. So
- 56:20you can see the number range 40 had this
- 56:22number range interval. So the first
- 56:24number that system assigned was 51 and
- 56:27all zeros. You can see here system
- 56:29automatically assigned this particular
- 56:31number here as per the number range
- 56:34interval that we have created and
- 56:36assigned to our material type by ro.
- 56:40Similarly, you can create another group
- 56:43and then assign a number range to that
- 56:45group and then assign that group to the
- 56:47material type and in a group you can
- 56:50have one internal number range interval
- 56:52and one external number range interval.
- 56:55Okay. So in this way we understood about
- 56:57the material type configuration and the
- 57:00number range assignment. In our next
- 57:02video we'll understand about the field
- 57:04selection and the screen configurations.
- 57:07We'll also see the configuration related
- 57:09to material length and how it is saved
- 57:12in the system and we'll also see the
- 57:15setting for key fields for a material
- 57:17master. So I hope that you have
- 57:18understood this concept of material type
- 57:20and number range assignment and I hope
- 57:22that you've liked this video. If you
- 57:24like my videos then please like and
- 57:26subscribe to my channel. Your likes and
- 57:28subscriptions really motivate me to
- 57:30create more content on SAPMM on this
- 57:33channel. See you in the next video. Till
- 57:35then thank you so much for supporting
- 57:36me. Thanks a lot.
About this transcript
This page contains the full transcript of Material Type Configuration and Number Range in SAP MM explained by SAP MM Learning Hub, generated from the public captions YouTube serves with the video. The transcript has 9,318 words across 1,424 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.