Material Master Maintenance in SAP MM | Complete Guide on Creation, Change and Extension — Transcript
Full transcript
- 0:00Hey everyone, welcome back to my
- 0:01channel. So in today's video, we'll
- 0:03learn about the material master in SAPM.
- 0:06In our last video, we understood the
- 0:08concept of master data in SAP MM. We
- 0:10learned about the concept of master data
- 0:12and why it is required in SAP. And in
- 0:14today's video, we learn about the first
- 0:16master data that is the material master
- 0:18in SAP MM. We learned what is material
- 0:20master, how you can create the material
- 0:21master and how you can maintain it in
- 0:24SAP. So let's start. So first of all,
- 0:26let's understand what is material
- 0:28master. So as discussed in the earlier
- 0:30video also material master is the
- 0:32central source of material specific data
- 0:34for any organization. If your
- 0:35organization is dealing with materials
- 0:38then you need to store the data of that
- 0:39material in some entity. That entity or
- 0:42that resource is called material master.
- 0:45It will basically hold all the data
- 0:47which is relevant for your material and
- 0:49that data you will be able to use
- 0:51repeatedly in all your purchasing
- 0:53documents. So you can see here it is
- 0:56used across various areas in logistics.
- 0:58It eliminates the problem of data
- 1:00repetition and data redundancy and you
- 1:02can use one material master multiple
- 1:04times in multiple documents in SAP. And
- 1:07finally the material master is also
- 1:09useful in maintaining inventory and for
- 1:12searching the historical documents such
- 1:14as purchase requisition, purchase order,
- 1:17material documents etc. So now let's see
- 1:19how a material master is structured in
- 1:21SAP and how you can maintain the
- 1:23material master. So to understand the
- 1:25structure of material master in SAP MM
- 1:28first we need to understand what is
- 1:29called a view of a material master. So
- 1:32whenever you'll be creating a material
- 1:33master, it will be used across SAP in
- 1:36various modules. Let's say that you have
- 1:38created a material master for purchasing
- 1:40related activities. Then your purchasing
- 1:42department will be utilizing that
- 1:44particular material master. Or let's say
- 1:46that you have created a material master
- 1:48for sales related activities. So your
- 1:50sales department will be utilizing that
- 1:52particular material master. So depending
- 1:55upon what kind of activity you're going
- 1:57to do with a material master, you have
- 1:59to create what is called as views for a
- 2:02material master. These views will
- 2:04basically represent department of your
- 2:06organization which will be maintaining
- 2:09their specific data against the material
- 2:12master. Okay. So you can see here you
- 2:15have a material master record. This
- 2:18material master record contains various
- 2:20views that is various user departments
- 2:23will be maintaining their data which is
- 2:26relevant to them as per their usage. So
- 2:28you can see here a material master
- 2:29record will contain the basic data that
- 2:32is the data which will be used across
- 2:33the organization that is every module
- 2:36will use this basic data. Then you have
- 2:38purchasing data which will be used by
- 2:40the purchasing department. Then sales
- 2:42data will be used by the sales
- 2:43department. The work scheduleuling will
- 2:45be used by the production planning
- 2:47department. Then quality management,
- 2:49forecasting, classification. Then you
- 2:51have MRP data which will be used by MRP
- 2:54controller. Then you have stocket plant
- 2:56or storage location data which will be
- 2:58used by the warehousing manager. Then
- 3:00you have accounting data which will be
- 3:02used by the accounting department. Then
- 3:04you can see you have storage data and
- 3:06warehouse management. So you can see
- 3:08every department will be utilizing this
- 3:10material master record for its own
- 3:12activities. So whenever you are
- 3:15maintaining the material master you must
- 3:17maintain your relevant data and that is
- 3:20why the first screen that SAP will
- 3:22propose you will be the views for a
- 3:25material master record. You will select
- 3:28your specific views and you will
- 3:31maintain those views as per your
- 3:33requirement. Let's say that you are from
- 3:35purchasing department then you will
- 3:37maintain the purchasing related data. If
- 3:39you are from finance or accounting
- 3:41department then you will maintain the
- 3:43accounting related data. So in this way
- 3:45you can see a material master record
- 3:47contains multiple department related
- 3:50views and if you have a central person
- 3:53who is maintaining every data then he
- 3:56has to collect the relevant data from
- 3:58all these departments and then feed it
- 4:00into the material master record. Okay.
- 4:04Now to create certain documents, you
- 4:06must have minimum views for a particular
- 4:09material code. Let's say that you want
- 4:11to create purchase order. Then you must
- 4:14have basic data, purchasing data and
- 4:17accounting data. Let's say that you want
- 4:19to create GR for a purchasing document.
- 4:22Then you must have basic data,
- 4:24purchasing data, accounting data, and
- 4:27storage data. Let's say that you want to
- 4:29do warehouse management. Then you must
- 4:31have the warehouse management data. Then
- 4:33let's say that you want to use your
- 4:34material for MRP related processes. Then
- 4:37you must have your MRP data. Okay. So
- 4:40these views basically represent the
- 4:42department which will be doing
- 4:44activities with the help of material
- 4:46master and hence they will have to
- 4:48maintain the relevant data against each
- 4:51view. Okay. So this is the first thing
- 4:53that you have to understand in the
- 4:55structure of material master that it
- 4:57contains multiple views based on each
- 5:00department of your organization. So you
- 5:03can see here the material master is
- 5:05maintained at two levels. One is the
- 5:07main work level and another one is the
- 5:10additional data level. Now what is the
- 5:11main work level? It is basically the
- 5:13combination of all these views. You can
- 5:15see here purchasing, work,
- 5:16scheduleuling, sales, accounting, MRP,
- 5:19forecasting all these are basically
- 5:21departments which will be utilizing the
- 5:23material master. Now once you have
- 5:25maintained these data, you also may
- 5:27required to maintain some additional
- 5:29data. Let's say that you have maintained
- 5:31a unit of measurement for a material but
- 5:33that material is also maintained with
- 5:35various other unit of measurements also.
- 5:38So where you can maintain those
- 5:39additional unit of measurements that you
- 5:41can maintain in the additional data
- 5:43levels. Okay. So you have two data
- 5:46screens that will come up on the screen.
- 5:48One will be for the main work level and
- 5:50another one will be for additional data
- 5:52level. And you can see in this
- 5:53additional data level you have multiple
- 5:56additional data also which you can
- 5:58maintain like you can maintain text for
- 6:00a material then multiple unit of
- 6:02measurements you can maintain then
- 6:03document data consumption data and
- 6:05additional EN. So in SAP also we'll see
- 6:08where this main work level and
- 6:10additional data level comes on the
- 6:11screen. But whenever you are maintaining
- 6:13the material master you can maintain at
- 6:15both these levels. you can maintain in
- 6:17the main work level also and the
- 6:20additional data you can maintain in the
- 6:22additional data level. Okay. Now let's
- 6:24understand what is the organizational
- 6:26levels which are there in the material
- 6:28master. So in our previous video also we
- 6:31have seen that any master is connected
- 6:33to multiple organizational element of
- 6:36your organization and for material
- 6:37master two organizational entities are
- 6:40very important that is plant and storage
- 6:43location. So you can see whenever you
- 6:46will be maintaining material data, you
- 6:48will be maintaining that data at three
- 6:50levels. One is the general data that you
- 6:52will maintain at the client level. That
- 6:54is the data which will be applicable
- 6:56across your organization. Then there
- 6:59will be plan data that you will maintain
- 7:01at the plant level and that data will
- 7:04contain the plant relevant information
- 7:06and then you will have the storage
- 7:08location data which will be maintained
- 7:10at storage location level. That is for
- 7:12each storage location under a plant you
- 7:14can maintain this storage location
- 7:17specific data. So you have these three
- 7:19levels that is the client level then the
- 7:21plant level and the storage location
- 7:23level and you can see at the client
- 7:25level you maintain the material code the
- 7:27short text and this short text you can
- 7:29maintain in multiple languages then you
- 7:31maintain material groups then unit of
- 7:33measurements and other details which are
- 7:35applicable for the whole organization.
- 7:37Then at the plant level you maintain the
- 7:38purchasing data, MRP data, forecasting
- 7:41data etc. And at the storage location
- 7:43level you maintain the storage location
- 7:45relevant data that is the storage bin,
- 7:47picking area etc. So you can see for any
- 7:50material master you have these three
- 7:52levels. When you will be selecting the
- 7:54views which we discussed in our previous
- 7:56slide, those views will come up with
- 8:00various organizational elements. Let's
- 8:02say that you're maintaining purchasing
- 8:03view. then system will ask you to enter
- 8:06the plant code because the purchasing
- 8:08data is maintained at plant level. If
- 8:11you select the storage location view
- 8:13then system will ask you to enter the
- 8:15plant and the storage location both
- 8:17because the storage location view will
- 8:19contain data which is relevant to the
- 8:21storage location. Okay. If you select
- 8:24the basic data only then system will not
- 8:26ask you to enter any organizational
- 8:28element because you will be maintaining
- 8:30the basic data at client level. So these
- 8:32views and these organizational levels
- 8:35combined together will basically create
- 8:37your material master. You will be
- 8:39presented with multiple views. When you
- 8:41select those views, system will ask you
- 8:44to enter the relevant organizational
- 8:46elements and based on that entry only
- 8:49you will be maintaining your material
- 8:51master record. So now let's understand
- 8:53how system will give you the screen
- 8:54sequence when you will be maintaining a
- 8:57material master record. So as we
- 8:59discussed we have multiple views for a
- 9:01material master that is we have basic
- 9:03data purchasing accounting storage and
- 9:06other views. Then with these views we
- 9:09have organizational levels. So once you
- 9:11select your views system will ask you to
- 9:13enter the organizational levels that is
- 9:15plant or storage location. Then once you
- 9:18enter the organizational levels then
- 9:20system will give you multiple data
- 9:22screens that is with each data screen
- 9:25you will be presented with multiple
- 9:27fields which are relevant for that view
- 9:30and that organizational level and in
- 9:32those fields you will maintain your
- 9:35material master data. Okay. So you can
- 9:37see this sequence. First you have to
- 9:39select the views. Then you have to enter
- 9:41the organizational levels and finally
- 9:43you will be presented with data screens
- 9:46which will have multiple fields which
- 9:48you will enter and save in the material
- 9:51master record. But in your organization
- 9:54you will deal with multiple kind of
- 9:56materials. So for each material you
- 9:58cannot have the same data screens. Let's
- 10:00say that you're creating master for your
- 10:02raw materials. Then you do not need the
- 10:06sales related data because raw materials
- 10:08will not be selling to anyone. you'll
- 10:10just be purchasing. Similarly, let's say
- 10:12that you're maintaining master record
- 10:13for finished goods. Then for finished
- 10:16goods, you do not require purchasing
- 10:17data because finished goods is something
- 10:20which you will be producing. So you will
- 10:22require sales data and the production
- 10:24data also. So depending upon the kind of
- 10:27material that you are creating, you must
- 10:29have some filtering technique so that
- 10:31you are presented with your relevant
- 10:33data screens and that filtering criteria
- 10:36is your material type and industry
- 10:39sector. So you can see the first screen
- 10:41that will be presented to you will
- 10:43basically contain inputs for material
- 10:46type and industry sector. So you can see
- 10:49we have two factors based on which your
- 10:51views will change and hence your data
- 10:54screens will change. Okay. And these two
- 10:57factors are material type and industry
- 11:00sector. And in the input you'll also
- 11:02have a reference field where you can
- 11:04enter a reference material code from
- 11:06which you want to copy to your new
- 11:08material code. Okay. So basically you
- 11:11have these three fields which will come
- 11:12up on the screen when you will try to
- 11:15create a material master and these
- 11:17fields are industry sector material type
- 11:19and reference material. Okay. And unless
- 11:23you select material type and industry
- 11:25sector you will not be able to create
- 11:28any material code. So now let's
- 11:30understand the meaning of this material
- 11:31type and industry sector. So now let's
- 11:34understand the meaning of material type.
- 11:36So you can see materials are segregated
- 11:38under various material types based on
- 11:41their properties. So whenever you'll be
- 11:43creating any material first you need to
- 11:46select what kind of material you are
- 11:48creating. Let's say that you're creating
- 11:49a raw material then you must select a
- 11:52different material type. If you're
- 11:53creating a finished goods then a
- 11:55different material type is to be
- 11:57selected. And this material type has
- 12:00multiple control functions and it is
- 12:02configured based on the properties of
- 12:05the material that you want to create.
- 12:06The configuration of material type we'll
- 12:08see in detail in our next video. In this
- 12:11video we'll see what is the meaning of
- 12:12material type and how we have to decide
- 12:15on what material type we have to select
- 12:18while creating the material master.
- 12:20Okay. So you can see these material
- 12:23types are basically categorized in two
- 12:25ways. One is the general business
- 12:27application and another one is the
- 12:29special business application. So you can
- 12:31see here we have these four major
- 12:33material types which are used in general
- 12:36business application and these are raw
- 12:39material, semi-finished good, finished
- 12:41good and trading goods. So your raw
- 12:43materials are basically inputs which you
- 12:45will use to create your semi-finished
- 12:47and finished good. The semi-finish good
- 12:49is basically the material which is
- 12:51produced in between. That is a material
- 12:53which you will not be selling to your
- 12:55end customer but you'll have to keep it
- 12:56in your inventory and then process it to
- 12:59create the finished good. Now the
- 13:00finished good is something which you
- 13:02will be selling to your customers. And
- 13:04this trading goods are basically used by
- 13:06traders where they will purchase the
- 13:07material and then sell it to the end
- 13:09customer. So you can see based on the
- 13:11type of material you are dealing with
- 13:13your views will change and the fields
- 13:15that you have to maintain in your
- 13:16material master will also change and you
- 13:19can see these are the standard material
- 13:21types which are given by SAP for these
- 13:24kind of materials. Then you can see we
- 13:26have special business applications also
- 13:28that is we have multiple special
- 13:31business scenarios where we need to
- 13:33create special material codes and for
- 13:36them we have to use these material
- 13:38types. So you can see we have
- 13:40nonvaluated material, non-stock
- 13:42material, pipeline material, returnable
- 13:44transport packaging material, then
- 13:47manufacturer part number materials and
- 13:49services. All these are special
- 13:51materials and for them we have to use
- 13:54their special material types. Okay. Now
- 13:57always remember that these are the
- 13:59standard material types which you can
- 14:01use in your organization. the
- 14:03configuration might be in such a way
- 14:05that custom material types are available
- 14:08which will basically be a copy of these
- 14:10standard material types. Okay. So you
- 14:13have to understand what type of material
- 14:15you are creating and you have to see the
- 14:17description of the material type that
- 14:19you are selecting and based on that
- 14:21material type only you have to verify
- 14:24what all views are coming on the screen
- 14:27and based on those views only you will
- 14:29be maintaining the material master. So
- 14:31you have to basically decide for which
- 14:34business transaction you are creating
- 14:36the material code and accordingly you
- 14:39have to select the material type. If you
- 14:41have custom material types in your
- 14:43organization then you have to either
- 14:46refer to your standard operating
- 14:47procedures or you have to see the
- 14:50description of that material type and
- 14:52decide upon which material type you have
- 14:55to select while creating your material
- 14:57master. Okay. So selection of material
- 15:00type is very important and is the first
- 15:02step in creating the material master. So
- 15:04you can see here the material type has
- 15:06multiple controls. The material type
- 15:08basically decides whether the number
- 15:10assignment will be internal or external.
- 15:13That is when you create the material
- 15:15code system will either assign a
- 15:17automatic number to your material master
- 15:19or will ask you to enter the number
- 15:21manually. So when you will be asked to
- 15:24enter the number manually then it means
- 15:26that that material type is configured
- 15:29for external number assignment. Okay. If
- 15:32the system automatically assigns a
- 15:34number then that particular material
- 15:36type will have configuration with
- 15:38internal number assignment. So external
- 15:40number assignment means you will have to
- 15:42feed the number externally in the
- 15:43screen. Internal number assignment means
- 15:46that system will automatically assign a
- 15:48material number to your material master.
- 15:51Okay. Then this material type also
- 15:53controls the permissible number range.
- 15:54You will see that for certain material
- 15:56type you get a different number range
- 15:58and for another material type you get a
- 16:00different number range. So basically
- 16:01this material type controls that what
- 16:04type of number is to be generated by the
- 16:06system. That is in which range that
- 16:08particular material number should lie.
- 16:10Okay. Then you can see as we discussed
- 16:12the material type controls the
- 16:14department specific views which are
- 16:15proposed to you on the screen. Then you
- 16:17can see the material type also controls
- 16:19the procurement type. Now what is a
- 16:21procurement type? Some materials are
- 16:24procured internally. What does internal
- 16:26procurement mean? Basically internal
- 16:28procurement means production of the
- 16:30material through production order. Okay.
- 16:33So a material can be procured internally
- 16:35and externally. Internally means you
- 16:38have to create production order.
- 16:39External procurement means you have to
- 16:41create a purchase order and then the
- 16:43vendor will supply you that material. So
- 16:46this procurement type is also controlled
- 16:49through the material type. So let's say
- 16:51that you have raw material then the
- 16:52procurement type will be external that
- 16:55is you will purchase that material from
- 16:56the vendor. If your material type is
- 16:58finished good then the procurement type
- 17:01will be internal that is you will be
- 17:02producing that material internally
- 17:04through production order. So this
- 17:06procurement type also is controlled by
- 17:08your material type. Okay. Then finally
- 17:11you can see the value and quantity
- 17:13control is also managed through the
- 17:16material type. On our channel, we
- 17:17already have a video on valuated,
- 17:20nonvaluated and non-stock item. You can
- 17:22check out that video and understand how
- 17:24material type controls the value and
- 17:26quantity update. So these are some basic
- 17:28material type controls which are there
- 17:30in the system. We'll see in detail about
- 17:32material type configuration in our next
- 17:34video. Now let's understand the meaning
- 17:36of industry sector. So as we saw that in
- 17:39the input screen, you have to select a
- 17:41material type and industry sector also.
- 17:44Now what does industry sector field do?
- 17:46Basically this controls which screens
- 17:48are displayed and in which sequence and
- 17:51which industry specific fields are
- 17:53displayed on each screen. Let's say that
- 17:56you're creating a raw material. But that
- 17:58raw material specifications may change
- 18:00based on the industry for which you are
- 18:03creating the raw material. So whenever
- 18:05you will be entering the material type,
- 18:08you also have to tell the system for
- 18:10which industry you are creating that
- 18:12material and based on that system will
- 18:14basically give you multiple screens in a
- 18:17given sequence and multiple fields which
- 18:19are applicable for that industry. So
- 18:22let's understand this with an example.
- 18:24So you can see here we have these two
- 18:26material types. We have raw materials
- 18:28and finished goods. And we have these
- 18:30two industry sectors. we have mechanical
- 18:32engineering and food industry. So for
- 18:35mechanical engineering a raw material
- 18:37can be a bearing and a finished good can
- 18:39be a machine. And for food industry a
- 18:41raw material can be a cocoa bean and a
- 18:44finished good can be a chocolate. So you
- 18:46can see for a given material type based
- 18:48on the industry sector the fields will
- 18:50change. That is if you're maintaining
- 18:52for food industry the fields will be
- 18:54different than if you're maintaining for
- 18:56mechanical engineering. So the material
- 18:58type is same that is raw material only
- 19:00but the fields will be different and the
- 19:03screens also may be different. Okay. So
- 19:06based on this industry sector you can
- 19:08configure what all screens are displayed
- 19:11in which sequence those screens are
- 19:13displayed and which fields are also
- 19:15displayed for maintaining the material
- 19:17master. Okay. So you can see this
- 19:20industry sector basically controls the
- 19:22screen and field selection. So we have
- 19:25understood these two fields that is
- 19:26industry sector and material type. Based
- 19:29on these two entries you will be given a
- 19:32list of views. When you select the views
- 19:34then you will be asked to enter the
- 19:36relevant organizational element. And
- 19:39once you enter those relevant
- 19:40organizational elements then data
- 19:43screens will come up and you will have
- 19:45to enter the relevant data for the
- 19:47material master. Okay. So it is a
- 19:50four-step process. First you have to
- 19:52enter the industry sector and the
- 19:53material type. Then you have to select
- 19:55the views. Then you have to enter the
- 19:58relevant organizational elements. And
- 20:00finally you have to enter the material
- 20:03master data records. We'll see this
- 20:05whole process in SAP and then it will be
- 20:07become more clear to you. Now let's see
- 20:09what is a material extension process. So
- 20:11till now we saw how we can create a
- 20:13material. But let's say that you have
- 20:15created a material and then you want to
- 20:18extend that material to a different
- 20:20organizational element then how you can
- 20:23do this process. So let's say that you
- 20:25have material M01 and you have
- 20:27maintained the purchasing data for plant
- 20:301000. Okay. So you have created this
- 20:32material you have entered the client
- 20:34data and you have entered the purchasing
- 20:36data. Now let's say that you want to
- 20:38extend this particular material with the
- 20:41accounting data also. As we saw that we
- 20:44have different views for purchasing and
- 20:46accounting. So you have already created
- 20:48for purchasing but now you want to
- 20:50extend the view for accounting. So how
- 20:52you can do that? So basically in this
- 20:54extension process you will have to
- 20:56create a particular view for this
- 20:58material. Okay. So this extension
- 21:01process is basically a creation only.
- 21:03But this time what you're doing you're
- 21:05not creating the whole material master
- 21:07record. You are basically creating
- 21:09individual views for that material
- 21:11master. Okay. So you can see here we are
- 21:14creating the accounting view for this
- 21:16material. We already had purchasing view
- 21:19and the basic data view. Now what we are
- 21:21doing is we are basically creating a
- 21:23accounting view. And this process is
- 21:25basically called material extension.
- 21:27That is you're extending the material to
- 21:29another view of that material master. So
- 21:32now you can see we have created two
- 21:34views that is purchasing and accounting
- 21:36view for plant 1,000. Now let's say that
- 21:39you have to extend this material to an
- 21:42another organizational element. Let's
- 21:44say that you have another plant where
- 21:47you have to extend this material with
- 21:49the purchasing view and the accounting
- 21:51view. So now you can see you want to
- 21:53extend this material to plan 2000 with
- 21:56purchasing and accounting view. So what
- 21:58does this mean? This basically mean
- 22:01creating these views for plant 2000. So
- 22:04you can see here this is also a creation
- 22:06process and once you create these views
- 22:09for plant 2000 then you will also have
- 22:11these two views available for this
- 22:13particular material. So now this
- 22:15material M01 has purchasing and
- 22:18accounting view for plant 1000 and
- 22:20purchasing and accounting view for plant
- 22:222000. So the creation of a material will
- 22:26happen once only. When you create a
- 22:28material, you will select those views
- 22:30and enter those organizational elements.
- 22:32Once you create the material, then for
- 22:35extending that material with another
- 22:37view or to another organizational
- 22:39element, you will basically be in
- 22:41creation mode only. But this time you
- 22:43will be creating new views or you will
- 22:45be entering new organizational element
- 22:48for the existing views. Okay. So in this
- 22:50case we saw in the first step what we
- 22:52did we extended this material to a new
- 22:54view that is accounting view for plan
- 22:561000 and in the next step what we did we
- 22:59extended this material in a new plan
- 23:01that is plan 2000 with purchasing and
- 23:03accounting view. So whenever you hear
- 23:05this word extension of material it
- 23:07basically means creation of new views or
- 23:11creation of data for new organizational
- 23:13element for existing views. Okay. So in
- 23:17this way we saw how you can create and
- 23:18extend a material. Now let's move on to
- 23:21SAP and see everything in action. So
- 23:23first of all let's create the material
- 23:25master. So we'll go to logistics
- 23:27materials management
- 23:29material master material. And here you
- 23:32can see you have two folders. One is for
- 23:35create special and another one is create
- 23:37general. So first of all let's go to
- 23:39this folder. So we'll go to create
- 23:41general. And you can see to create the
- 23:43material master you have decode mm01.
- 23:47Now this is the most important t-code as
- 23:49far as material master is concerned.
- 23:51Whenever you have to create a material
- 23:53you can use this decode mm01 to create
- 23:55the material master. So we'll double
- 23:57click on this mm01.
- 23:59So you see in the input screen you have
- 24:02these three fields that is the material
- 24:04number, industry sector and material
- 24:06type. and you have a field for reference
- 24:09material that is if you want to copy
- 24:11data from your existing material master
- 24:14then you can enter in this field and
- 24:16then you can copy from that particular
- 24:18material master. So now why you have an
- 24:20input field for material number also. So
- 24:23based upon your material type settings
- 24:25either your material will have an
- 24:27external number range or an internal
- 24:29number range. Now if your material
- 24:32number has external number range then
- 24:34you will have to feed the material
- 24:36number manually in this particular field
- 24:38in this screen here. If your material
- 24:41type is configured such that the
- 24:43material code is to be generated
- 24:45internally by the system then you are
- 24:47not supposed to enter any number here.
- 24:50Okay. Then you have to select this
- 24:52industry sector and the material type.
- 24:54So as we discussed this material type
- 24:56will be responsible for putting all the
- 24:59views on the screen which are applicable
- 25:01and this industry sector will be
- 25:03responsible for deciding that in which
- 25:06sequence those views are presented on
- 25:08the screen and which all fields are to
- 25:10be shown on the screen. So let's first
- 25:12create a raw material. So we'll select
- 25:15material type as ro. So let's enter ro
- 25:18here.
- 25:20So you can see ro is for raw material
- 25:22and let's enter industry type as
- 25:24manufacturing.
- 25:26So you can see we have selected industry
- 25:28sector as manufacturing and material
- 25:30type as raw materials. Now if you're not
- 25:32able to see this keys for the material
- 25:34type and industry then you have to go to
- 25:36this option here that is for customize
- 25:38local layout. If you click on this
- 25:40particular icon here, you'll go to
- 25:41options and here if you go to
- 25:44interaction design and visualization
- 25:46one, you can see you have this
- 25:48particular checkbox here that is show
- 25:50keys within drop-down list. So if you
- 25:52select this checkbox, then system will
- 25:55also show you the keys against the
- 25:57particular material type and the
- 25:59industry. So in each of the drop-downs
- 26:02which are available in your SAP for
- 26:04every field system will also show you
- 26:06the keys there. Okay. So you can see
- 26:08system is showing me this ro because I
- 26:11have selected this particular checkbox
- 26:13here. Okay. So we'll click on okay here.
- 26:17So now once you have entered the
- 26:19material type and industry let's press
- 26:21enter.
- 26:23So you see system gives a popup where
- 26:26system asks you to select the views. So
- 26:29as we discussed earlier what are views?
- 26:31Views are basically different
- 26:33departments which will be maintaining
- 26:35data against a material master or they
- 26:38represent multiple activities which will
- 26:40be done with the material master. So you
- 26:42can see you have views for basic data
- 26:44classification sales then purchasing
- 26:48then MRP related views. Then if you
- 26:50scroll down then you will find views for
- 26:52general plan data or storage one general
- 26:54plan data or storage two. Then you have
- 26:57quality management. Then you have
- 26:59accounting views and if you scroll
- 27:00further down you'll find that you have
- 27:02views for costing also. So in this way
- 27:04you can see you have all these views
- 27:07depending upon the material type which
- 27:09you have selected in the input screen.
- 27:11So this material type basically is
- 27:13configured in such a way that you will
- 27:15get all these views on the screen where
- 27:18you can maintain data against your
- 27:20material master. So as we discussed
- 27:22earlier for doing purchasing and
- 27:24inventory management related activities
- 27:26the minimum view that you have to select
- 27:28is first you have to select basic data
- 27:31one then purchasing
- 27:35then if you scroll down you have to
- 27:36select general plan data or storage one
- 27:38view and the accounting one view. So
- 27:41these four views are the minimum views
- 27:44that you have to select for enabling
- 27:47your material for purchasing and
- 27:49inventory management related activities
- 27:51because for purchasing related
- 27:53activities you have to maintain the
- 27:54purchasing view. For inventory
- 27:56management related activities you have
- 27:58to enter the general plan data or
- 28:00storage one view and for the accounting
- 28:03related activities you have to maintain
- 28:05the accounting one view. And to enter
- 28:07the basic data of the material that is
- 28:09the basic information of the material
- 28:12you have to enter that in the basic data
- 28:14one view. Okay. Now let's press enter
- 28:17and see what happens. So if I click on
- 28:19this continue button here you can see
- 28:22now system asks me to enter the
- 28:24organizational levels. You can see here
- 28:27system asks me to enter the
- 28:29organizational levels which is
- 28:31applicable to the views which I selected
- 28:34earlier. Okay. Earlier I selected four
- 28:37views that were basic data one,
- 28:40purchasing storage one and accounting
- 28:43one. So for all those views collectively
- 28:46I must enter these two organizational
- 28:49levels that is the plant and the storage
- 28:51location. The plant has come up because
- 28:54I selected the purchasing and accounting
- 28:56one view and the storage location has
- 28:59come up because I selected the storage
- 29:01one view. Okay. Now to verify this,
- 29:04let's close this window first. And again
- 29:06let's press enter and let's select basic
- 29:09data one only and let's press enter. So
- 29:12now you see system did not ask me to
- 29:15enter any organizational level. Now why
- 29:17this happened? Because the basic data
- 29:20one is the client level data and the
- 29:22client information is already there in
- 29:24the system from my login information. So
- 29:27system did not ask me to enter the
- 29:29client. Now let's go back and select the
- 29:31purchasing view also. So we'll go back
- 29:34and let's again double click on mm01 and
- 29:38let's press enter. And now let's select
- 29:40basic data 1 and purchasing and let's
- 29:42press enter. Now you see system asks me
- 29:46to enter the plant code. So for
- 29:49maintaining the purchasing view I need
- 29:51to enter the plant code for which I am
- 29:54maintaining this purchasing view. So the
- 29:56moment I selected the purchasing view
- 29:58also along with basic data one system
- 30:01first asks me to enter the planned code
- 30:04against which I am going to maintain the
- 30:06purchasing data. Now let's close this
- 30:08window and let's again press enter and
- 30:11this time I'll select basic data one
- 30:13purchasing and I'll select the storage
- 30:16one view also
- 30:18and now let's press enter. Now you see
- 30:21system asks me both these data that is
- 30:24the plant code and the storage location.
- 30:27Now why this is happening because I have
- 30:29selected purchasing view storage one
- 30:32view and basic data one view. So for
- 30:35purchasing view planned code is required
- 30:37for storage one view storage location is
- 30:40required. So as and when you keep on
- 30:43selecting the views system will give you
- 30:45popup for all the applicable
- 30:47organizational levels. Now let's again
- 30:49close this particular window and let's
- 30:52press enter. And now let's select basic
- 30:54data one view, sales view, purchasing
- 30:57view,
- 30:59storage one view and the accounting
- 31:01view. And let's press enter. Now you see
- 31:05the list of organizational level have
- 31:08increased. Now what extra levels system
- 31:10is asking you to enter? along with plant
- 31:12and storage location system is also
- 31:15asking you to enter the sales
- 31:17organization and the distribution
- 31:19channel. Now why this has happened?
- 31:21Because we have selected the sales view
- 31:23also and to maintain the sales related
- 31:26data you must enter the sales
- 31:28organization and the distribution
- 31:30channel against which you are
- 31:32maintaining the sales related data.
- 31:35Okay. So depending upon the views that
- 31:37you select system will give you all the
- 31:39applicable organizational levels which
- 31:41you must enter first and then only
- 31:43system will send you to the data
- 31:45screens. Okay. So as we discussed this
- 31:48is a four-step process. First you have
- 31:50to select the industry and the material
- 31:52type. Then if you press enter you have
- 31:54to select the views. So let's select
- 31:56again these views.
- 32:03And then in the third step you have to
- 32:05enter the organizational levels. So
- 32:07let's enter our plant code
- 32:12and we'll enter the storage location and
- 32:15let's press enter. So you see system
- 32:18first sends me to this basic data one
- 32:20view. You can see this particular tab is
- 32:22selected currently and there is a
- 32:24particular icon appearing here. Okay. So
- 32:26currently I'm in the basic data one
- 32:28view. Now this view will be maintained
- 32:30at client level and what all data I have
- 32:33to maintain in this particular view.
- 32:35Basically I have to maintain the
- 32:37descriptions, unit of measurements,
- 32:38material groups and other details of the
- 32:41materials which are related to the
- 32:43specification of the material. Okay. So
- 32:46let's say that I am creating the
- 32:47material code for bearings. So I'll
- 32:49enter bearing here as the description.
- 32:53Then you can see system asks me to enter
- 32:55the unit of measurement. So let's enter
- 32:57each here.
- 32:59And then you can see system asks me to
- 33:02enter the material group. Now what is a
- 33:04material group? Basically this is a
- 33:06broad category under which I can define
- 33:08a material based on its specifications.
- 33:11And this particular material groups will
- 33:13be created through the configuration
- 33:15route. The mm consultant will create all
- 33:18the applicable material group which is
- 33:20there for your organization and then you
- 33:23have to select the appropriate material
- 33:25group in this particular field here.
- 33:27Normally material groups are used for
- 33:29reporting purpose and are also used for
- 33:32account determination purpose. But you
- 33:35have to understand that this material
- 33:37group is basically to show that for what
- 33:39kind of material you are creating the
- 33:42material master. Okay. So if you take a
- 33:44drop-down, you will find the list of all
- 33:46the material groups which have been
- 33:48created in your system. So let's select
- 33:50this particular material group here.
- 33:51Then you can see you have other fields
- 33:53like old material number, authorization
- 33:56groups and then dimensions of the
- 33:58particular material. So all these fields
- 34:00are basically client level fields that
- 34:02is the fields which will be applicable
- 34:04throughout the organization. Now you can
- 34:07see you have a button for additional
- 34:10data. Now as we discussed earlier
- 34:12whenever you are maintaining the data
- 34:14for a material master you have the
- 34:16option to maintain the main data that is
- 34:19the main views that you have selected
- 34:21and you also have the option to maintain
- 34:24the additional data. Now what is an
- 34:26additional data? Let's say that you have
- 34:28entered the base unit of measurement as
- 34:30each that is numbers but this particular
- 34:32material is also managed in other unit
- 34:35of measurements. Then how you can enter
- 34:37those additional unit of measurements in
- 34:39the material master. So to enter those
- 34:41additional information you have this
- 34:43particular section here. So once we have
- 34:45entered the client level data let's
- 34:47press enter. And now you can see system
- 34:50sends you to this purchasing view. So in
- 34:53the same sequence in which you selected
- 34:55the views in the first screen system
- 34:57will send you in all those views. So
- 35:00first system sent you to the basic data
- 35:02one view and we enter the basic data of
- 35:04the material. Now system has sent you to
- 35:07this purchasing view and you can see
- 35:08this icon appearing here which says that
- 35:11currently you are maintaining the
- 35:12purchasing related data and you can see
- 35:15the plant code has appeared here.
- 35:17Earlier in the basic data one view you
- 35:19were not seeing the plant code field. If
- 35:22you again go to the basic data one view
- 35:24if I select here you can see the plant
- 35:26code field is not there because this
- 35:28basic data one view we are maintaining
- 35:30at the client level. But if we go to the
- 35:32purchasing data, you can see for
- 35:34purchasing you must have a plant code
- 35:37here. And this is the plant code which
- 35:39we entered in the input screen. Okay. So
- 35:42you have plant code M00001 for which you
- 35:45are maintaining the purchasing data. And
- 35:47you can see there are multiple fields
- 35:49which are relevant for purchasing like
- 35:51purchasing group, material status, tax
- 35:53indicator, material freight group. Then
- 35:56you have order unit, automatic PO
- 35:58indicator and you have purchasing value
- 36:00keys related data. So all these data are
- 36:03purchasing related data which you
- 36:05maintain at plant level. Okay. So let's
- 36:08enter a purchasing group here and then
- 36:11we'll press enter. And now you can see
- 36:13system has sent to this view plant data
- 36:16or storage one view. And now you can see
- 36:18along with plant you have storage
- 36:20location also being shown on the screen.
- 36:24And why this is happening? Because now
- 36:26we are maintaining the storage location
- 36:29data. Okay. So for storage location data
- 36:33the storage location entry is mandatory
- 36:36and system is telling you that we are
- 36:38creating the storage location data for
- 36:40plant M00001 and storage location01
- 36:45and here in this particular screen you
- 36:47will find the storage location data
- 36:50which you have to enter like you have
- 36:52storage bin temperature conditions
- 36:54container requirements unit of issue
- 36:57picking area all these fields are
- 36:59basically related to your storage
- 37:00location data. Now if you again press
- 37:03enter, now you see system sends you to
- 37:06the accounting view and here you can see
- 37:09you have planted code available. Now for
- 37:11accounting view you maintain data at
- 37:14valuation area level and normally
- 37:17valuation area is maintained as planned
- 37:19code only. So here you will maintain at
- 37:22the planned code level and you can see
- 37:24two most important fields which are
- 37:26there in this accounting one view is the
- 37:29valuation class and the price control.
- 37:31We'll see these two fields in detail in
- 37:34our subsequent videos. Basically this
- 37:36valuation class connects your material
- 37:38master to the financial document posting
- 37:41part. That is whenever you will post any
- 37:43material document against your material
- 37:45master system will automatically pick
- 37:48GL's in the background while posting the
- 37:50accounting documents and those GLS will
- 37:53be determined automatically through a
- 37:56automatic account determination process
- 37:59in which this valuation class plays a
- 38:02crucial role. We'll understand this
- 38:04concept when we discuss the material
- 38:06valuation and automatic account
- 38:07determination. But this valuation class
- 38:10is basically a bridge between MM and FI.
- 38:14Okay. And you can see you have another
- 38:15field called price control. Basically in
- 38:18this particular field you have two
- 38:19options. Either your material can have a
- 38:22standard price or moving average price.
- 38:24We'll discuss the concept of standard
- 38:26price and moving average price in our
- 38:28subsequent videos. And you can see I
- 38:30cannot change the price control here.
- 38:32Now this is controlled through the
- 38:34material type configuration. We'll see
- 38:36the material type configuration in
- 38:37detail in our next video. So for now
- 38:40what we'll do we'll enter a valuation
- 38:42class here. So let's take a drop-down
- 38:44and you can see system gives you a list
- 38:46of valuation class which is applicable
- 38:48for this material. Now this particular
- 38:51drop-down also comes from the material
- 38:53type configuration. Okay. So let's
- 38:55select 3,00 here.
- 38:58And now let's press enter. So now you
- 39:01see system is asking you to enter a
- 39:03moving average price. So let's enter a
- 39:05moving price here.
- 39:08And now if you press enter what system
- 39:09will do? Remember that we had selected
- 39:11four views earlier that is basic data
- 39:14one view, purchasing view, story
- 39:16location view and accounting one view
- 39:18and we have gone through all these views
- 39:21in this particular screen and now we are
- 39:23in the last view. So if we press enter
- 39:26system will basically create your
- 39:27material master. So let's press enter
- 39:30and you can see system tells you that
- 39:32you are about to exit and why this has
- 39:34happened because last data screen has
- 39:37been reached. Okay. So whatever views
- 39:39you selected you have already gone
- 39:42through all those views and you have
- 39:44maintained your applicable data and now
- 39:46you are in your last screen. So if you
- 39:49about to exit whether you want to save
- 39:51your data. So if you click on yes,
- 39:53system will create the material master.
- 39:56And before clicking on yes, you can see
- 39:58system has already assigned a number in
- 40:01this particular material number field.
- 40:03And why this is happening? Because for
- 40:06this particular material type, the
- 40:08configuration is such that system will
- 40:11internally assign a number. That is
- 40:13system will automatically assign a
- 40:15number to your material master. And this
- 40:17is the number which system has already
- 40:19assigned to your material master. And if
- 40:22we click on yes, system will create this
- 40:24material master with this particular
- 40:26material number. Okay. So let's click on
- 40:28yes.
- 40:30And you can see system tells you that
- 40:32material number has been created. Okay.
- 40:35Now how I can display this material
- 40:37master. So let's go back and again we'll
- 40:40go to logistics materials management
- 40:44material master.
- 40:48We'll go to display and mm03 is for
- 40:52displaying a material master. Okay. So
- 40:54to display any material code you have to
- 40:56go to tcode mm03 and you can see this is
- 40:59the material code that we created just
- 41:01now. Now if I press enter you can see
- 41:04again system will give me a list of all
- 41:06the applicable views. So if I select
- 41:08basic data one purchasing general plan
- 41:10data storage one and accounting one. And
- 41:13if I press enter I'll have to enter all
- 41:16those organizational levels. So I'll
- 41:17enter the plant code and the storage
- 41:20location.
- 41:22And you can see one more field system is
- 41:24asking me to enter that is the valuation
- 41:26type. Now this is applicable for
- 41:28materials with split valuation. We'll
- 41:30understand this particular topic in our
- 41:32subsequent video when we understand
- 41:34about the split valuation functionality.
- 41:36For this material we do not have the
- 41:38split valuation functionality. So we'll
- 41:39not enter anything in this valuation
- 41:41type field. We'll simply press enter.
- 41:44And you can see system will show you all
- 41:46that data which has been maintained
- 41:48against all these views. So you have
- 41:50basic data one. Then if you press enter
- 41:52system will send you to the purchasing
- 41:54view. Then again if you press enter
- 41:56system will send you to the plan data or
- 41:58storage one view. And if you again press
- 42:00enter system will send you to the
- 42:02accounting one view. Okay. So in this
- 42:05way we have created the applicable views
- 42:08for purchasing and inventory management.
- 42:11Now let's understand the meaning of this
- 42:12create special folder. So we used mm01
- 42:15under this particular folder. You can
- 42:17see mm01 is there in the create general
- 42:19folder. Now let's go to this create
- 42:22special folder. And you can see you have
- 42:24multiple key codes for creating
- 42:26individual material master for various
- 42:29material types. So you can see mm r1 is
- 42:32for creating raw material. Mm1 is for
- 42:35creating semi-finish product. Mm f1 is
- 42:38for creating finished product and so on.
- 42:40So if you double click on this MMR1 that
- 42:42is if you go to this decode MMR1 system
- 42:45will automatically select the material
- 42:48type as raw material and system will
- 42:50select the industry which you selected
- 42:52in your earlier transaction. Okay. So
- 42:54you can see system automatically
- 42:56defaults the material type to ro that is
- 42:59raw material. Now if you go back and if
- 43:03you open mm1 you can see system
- 43:05automatically selects the material type
- 43:07as h a lb. So basically these T- codes
- 43:10are special T- codes for creating
- 43:12material for a particular material type.
- 43:15That is if you do not know the key for a
- 43:18particular material type then you can
- 43:20directly go to these T- codes and system
- 43:22will automatically select the
- 43:24appropriate material type. Let's say
- 43:26that you want to create material for
- 43:28trading goods then you can double click
- 43:30on mm-1 and you can see system
- 43:32automatically selects the material type
- 43:35as H AA that is for trading goods. If
- 43:38you go back and let's say that you want
- 43:40to create a nonvaluated material then
- 43:42the t-code is mmu1 and if you go to this
- 43:44t-code system will automatically select
- 43:47the material type as unbw.
- 43:49So these T codes are specifically
- 43:52designed to create materials for a
- 43:54particular material type and MM01 is
- 43:58basically for creating the material
- 43:59master from scratch. That is you will
- 44:02have to select the industry and the
- 44:04material type and then you will be
- 44:06creating the material codes. These are
- 44:08specialty codes which are there for
- 44:11particular material type which if you
- 44:13open system will default the material
- 44:15type to the particular transaction which
- 44:18you're using. Now let's see how we can
- 44:20change a material master. So to change
- 44:22the material master, we'll go to this
- 44:24folder and you can see mm02 is for
- 44:27changing the material code. So if we
- 44:29double click on mm02, we'll go to the
- 44:31change material screen. Now let's enter
- 44:33the material code. So this is the
- 44:36material code we created just now. Now
- 44:37let's press enter. And now we have to
- 44:39select all the applicable views. So now
- 44:41let's say that we have to change
- 44:42something in basic data 1. So we'll
- 44:44select basic data 1 and we'll press
- 44:46enter. And here you can see you can
- 44:48change all those details which you
- 44:50entered earlier. So I can change the
- 44:52base unit of measurement, the material
- 44:54group, the description and I can also
- 44:56enter details which I did not enter
- 44:58earlier. Now for some fields you have
- 45:00certain restrictions like if you have
- 45:03already created a purchasing document or
- 45:06if you have stock then you cannot change
- 45:08the base unit of measurement. Okay. So
- 45:10to change the base unit of measurement
- 45:12you must delete all the purchasing
- 45:14documents and you should not have stock
- 45:16against your material. Then only you
- 45:18will be able to chain this base unit of
- 45:20measurement. Okay. So this mm02 you can
- 45:23use to chain the data against all the
- 45:25views which you have already maintained.
- 45:28So if I go to the purchasing view, I'll
- 45:30have to enter the plant code first and I
- 45:33can change the purchasing related data.
- 45:35Okay. If I go to the storage one view,
- 45:37then I'll have to enter the storage
- 45:39location also.
- 45:41And then for this combination of plant
- 45:43and storage location, I can change the
- 45:44data which I entered earlier or I can
- 45:47enter new data also. If I go to the
- 45:49accounting one view, I can change the
- 45:51valuation data. But here also for
- 45:53valuation class you have multiple
- 45:55prerequisites based on which you can
- 45:58change the valuation class. So through
- 45:59tcode mm02 you can change a material
- 46:02master. Now let's see how we can
- 46:05maintain the additional data for a
- 46:07particular material. Okay. So you can
- 46:09see we have a button here called
- 46:12additional data. Let's say that for a
- 46:14material you have entered base unit of
- 46:16measurement as each but that material is
- 46:19managed in other unit of measurements
- 46:21also. Okay. Let's say that these
- 46:23bearings are also supplied in cartons.
- 46:26So how you can maintain that unit of
- 46:28measurement? So this new unit of
- 46:30measurement is basically an additional
- 46:32data for this material. And to enter
- 46:34this additional data, I have to go to
- 46:37this particular button here. And if I
- 46:39click on this button here, you can see
- 46:40system will send you to another screen
- 46:43here. And this screen contains different
- 46:46tabs. Earlier we had all the tabs for
- 46:49the applicable views for the material.
- 46:51Now you have tabs related to the
- 46:53additional data for the material. And
- 46:56you can see you have tabs for
- 46:57description, unit of measurement,
- 46:59additional ENS, document data, basic
- 47:01data text, inspection text and so on. So
- 47:04you can see in this description tab, you
- 47:06can enter the description of this
- 47:08material in multiple languages. For our
- 47:11current case, we have entered beering in
- 47:13the English language. You can select any
- 47:16other language and then enter the
- 47:18description of this material in that
- 47:20particular language. Let's say that you
- 47:22select German here. then you can enter
- 47:24the German description of this
- 47:26particular material in this particular
- 47:28field. So basically these tabs are to
- 47:31maintain the additional data against the
- 47:33main data that you have maintained in
- 47:35the material master. Okay. So you had
- 47:38maintained a description of this
- 47:39material in the basic data one tab. Now
- 47:41additional data against that description
- 47:44that is description in multiple
- 47:46languages you can enter in this
- 47:48particular additional data screen. Okay.
- 47:50Then if you go to units of measure, you
- 47:53can enter the additional unit of
- 47:54measures which are applicable for this
- 47:56material code. And you can see this is
- 47:58the base unit of measurement that we
- 48:00entered in the basic data one tab. In
- 48:03this particular table, I can enter other
- 48:05unit of measurements also which are
- 48:07applicable for this material. So let's
- 48:09say that this material is also managed
- 48:11in cartons. So what I can do? I can
- 48:13enter the unit of measurements in
- 48:15cartons here and here I can maintain the
- 48:18conversion ratio between these two unit
- 48:20of measurements that is let's say that
- 48:22in a carton you have 10 bearings so you
- 48:25can enter 10 here and if you press enter
- 48:28you can see one carton is equal to 10
- 48:30each okay so in this way you can enter
- 48:34multiple applicable unit of measurement
- 48:36in this particular additional data tab
- 48:39okay then if you go to the basic data
- 48:42text you can Enter the additional data
- 48:44for this particular material. Let's say
- 48:46that you have entered a description as
- 48:48bearing and you want to enter the
- 48:50specification of this bearing. Then that
- 48:52specification you can enter in this
- 48:54basic data text tab. Okay. Then you have
- 48:57inspection text. Here you can enter the
- 48:59inspection related text that is the
- 49:02inspection instruction which is there
- 49:03for this material. You can enter in this
- 49:05particular box here. Then you can see
- 49:08you have internal comment where you can
- 49:10enter some internal comments for this
- 49:11material. And finally you have this
- 49:13consumption tab where you can maintain
- 49:15the consumption data of this particular
- 49:18material. So in this way you saw that in
- 49:21this particular additional data section
- 49:23you can enter the additional data which
- 49:25is applicable for your material. And if
- 49:29you want to go to the main data then you
- 49:31can click on this button here and again
- 49:33system will send you to this particular
- 49:36list of all the views. Okay. So you can
- 49:38see we have all these views here. Basic
- 49:40data one, purchasing, accounting one and
- 49:43storage one. And if you want to go to
- 49:45the additional data then you have to
- 49:47click on this button here. Okay. So now
- 49:49let's save this material code.
- 49:52Now let's see how we can extend a
- 49:54material master. Now as we saw earlier
- 49:57what is the meaning of extension?
- 49:59Basically extension means creation of
- 50:02new views for a material or creation of
- 50:06the existing views for new
- 50:08organizational elements. Okay. So let's
- 50:11say that you have created this material.
- 50:13Now let's say that you have created this
- 50:15material and you want to maintain the
- 50:18MRP views also. So what this will mean?
- 50:21This will mean basically extending this
- 50:23material code with the MRP views and how
- 50:26I can do that. So whenever you are
- 50:28extending a material basically you are
- 50:30creating a material in a particular
- 50:33view. So what we have to do again we
- 50:35have to go to T-code mm01
- 50:38and we have to enter the material code
- 50:40that we created just now. So we'll enter
- 50:43this material code. We'll have to press
- 50:45enter and this time we'll select the MRP
- 50:48views here. So what we are doing we
- 50:51already have a existing material master
- 50:54but we are creating new views for this
- 50:56material master. Okay. So this creation
- 50:59of new views basically amounts to
- 51:02extension of this material for these
- 51:04activities. Okay. So let's press enter.
- 51:07And you can see now system asks you to
- 51:09enter the planned story location and MRP
- 51:12profile and the planned code is
- 51:14mandatory for these views. that is at
- 51:16least you have to enter the plant code
- 51:18to maintain the views. So let's enter
- 51:21m001 here and let's press enter and you
- 51:24can see system sends you to this
- 51:27particular screen of mRP1 and what
- 51:29system tells you here system tells you
- 51:32that material already exists and will be
- 51:35extended. Now why system is telling you
- 51:37this because this material already has
- 51:40data against multiple views. This
- 51:42material already has data against basic
- 51:44data one view purchasing accounting and
- 51:47storage location view and now you are
- 51:50entering new views for this material
- 51:52that is MRP 1 2 3 and four. So basically
- 51:55system tells you that material already
- 51:58exist and will be extended with these
- 52:00views. Okay. So let's enter the relevant
- 52:02data. So we'll enter MRP type here.
- 52:06We'll enter the lot sizing procedure
- 52:08here.
- 52:11We'll enter MRP controller here. Let's
- 52:14press enter. And you can see now system
- 52:17sends you to the MRP 2 view. Let's press
- 52:19enter again. Now we are in MRP 3 view.
- 52:21Let's press enter again. And finally we
- 52:24are in MRP 4 view. And now if you press
- 52:26enter, system will tell you that we have
- 52:28reached the last data screen. And if you
- 52:30click on yes, now system will extend
- 52:33this material with all those four views
- 52:35that is MRP 1, MRP 2, MRP 3 and MRP 4.
- 52:40So in this way we extended an existing
- 52:43material code to four new views. Now
- 52:46let's see how we can extend this
- 52:48material to a new organizational
- 52:51element. That is let's say that we have
- 52:53this material created against a plant
- 52:55and a storage location. Now let's extend
- 52:57this material to another plant and
- 53:00storage location. Okay. So how we can do
- 53:02that? Again we'll have to create the
- 53:04views for our new organizational
- 53:07element. And this time what we can do we
- 53:09can copy the existing data which is
- 53:12there in our previous plant code and
- 53:14storage location. So let's do that. So
- 53:17we'll enter the material code here and
- 53:19we'll enter the material code here also.
- 53:22So you can see I am entering the
- 53:23material code here for which I want to
- 53:25create views for new organizational
- 53:27element and I am entering the same
- 53:30material code here in the reference
- 53:32field also. And let's press enter. And
- 53:35let's again select basic data one,
- 53:38purchasing storage one and accounting
- 53:41one. And let's press enter. Now you see
- 53:44system gives me two sections here. One
- 53:46is organizational levels for which I
- 53:48have to create the material code and the
- 53:51organizational levels from where I have
- 53:53to copy. Okay. Now when I am saying that
- 53:56I have to create basically I am doing
- 53:59the activity of extension because this
- 54:02material code already exist in the
- 54:04system. I am extending it to a new set
- 54:07of plant and storage location
- 54:09combination and I want to copy the data
- 54:13from an existing plant and storage
- 54:15location combination. So let's do that.
- 54:17So let's enter our new plant code here.
- 54:19So we'll enter the plant code and we'll
- 54:22enter the new storage location here
- 54:26and here we'll enter the plant code and
- 54:29storage location from where we want to
- 54:31copy. Okay. Okay. So we'll enter the
- 54:33existing plant code and the story
- 54:35location.
- 54:37So we already have material master
- 54:40maintained against this plant and story
- 54:42location combination and we are
- 54:44extending those views to this new plant
- 54:46and storage location combination. That
- 54:49is we are basically creating these views
- 54:52for this plant and storage location
- 54:54combination and we are copying data from
- 54:57this combination. Okay. So let's press
- 54:59enter. And now you can see system tells
- 55:03you that the material already exists and
- 55:05will be extended and extended where
- 55:08extended to the new plant and storage
- 55:10location. Okay. And you can see system
- 55:13will copy the data from the existing
- 55:15material master record. So you can see
- 55:17the purchasing group has been copied. If
- 55:19we press enter, if you had entered any
- 55:22data in the storage one view also, then
- 55:24that data also would have been copied
- 55:26here. Then if we press enter finally in
- 55:28the accounting one view you can see the
- 55:30valuation class and the moving price has
- 55:33been copied from the existing data which
- 55:36lies against plant m001. Okay. So the
- 55:39data which was existing in the earlier
- 55:41plant and story location combination is
- 55:43copied here on the screen and now you
- 55:46are creating this material master for
- 55:48the new combination of plant m002 and
- 55:51storage location02.
- 55:54Okay. So always you have to remember
- 55:56that whenever you are extending a
- 55:58material you are basically creating new
- 56:01views for the material or you are
- 56:03creating the existing views for new
- 56:06organizational elements. Okay. So now if
- 56:09you press enter you can click on yes and
- 56:11now system will extend this material to
- 56:14this new plant and storage location
- 56:16combination. To verify this, we'll go to
- 56:19MM03
- 56:22and we'll enter this material code and
- 56:24we'll press enter. We'll select basic
- 56:26data one, purchasing storage one and
- 56:29accounting one. We'll press enter. And
- 56:32this time we'll enter the new plant and
- 56:34storage location. So we'll enter M00002
- 56:37and storage location02.
- 56:40And if we press enter, you can see
- 56:42system has created this material master
- 56:45for this new plant and storage location
- 56:47combination or system has extended this
- 56:50material to this new plant and storage
- 56:52location combination. So if we press
- 56:54enter, you can see the purchasing view
- 56:56has been created for plant M002. If you
- 56:59again press enter, you can see the
- 57:00storage one view has been created for
- 57:03combination of M002 and triple02. If you
- 57:06again press enter, you can see the
- 57:08counting one also has been created for
- 57:11plant M00002.
- 57:13Okay. So in this way we saw how we can
- 57:15extend the material with new views or
- 57:18with new organizational elements. Now
- 57:21let's say that you have to extend your
- 57:24material to multiple storage locations.
- 57:26Let's say that under your plant you have
- 57:28multiple storage locations and you have
- 57:31to extend your material to all those
- 57:33storage locations. So how you can do
- 57:35that? You can do that activity by using
- 57:38a special transaction code that is MMSC.
- 57:42So if you go back, if you go to this
- 57:44other folder, you can see you have MMSC
- 57:47for enter storage location. Now if I
- 57:50double click this, you can see system
- 57:52asks you to enter a material code and a
- 57:54plant code. And you have two selections
- 57:57here. List all existing storage
- 57:59locations or list extendable storage
- 58:02locations only. Now what is list all
- 58:04existing story location? Here system
- 58:06will show you the existing story
- 58:08locations also where this material is
- 58:10extended and you will have the option to
- 58:12enter new storage locations. In this
- 58:14option system will not show you the
- 58:16existing storage location. System will
- 58:19only give you a screen where you can
- 58:20enter the new storage locations. So
- 58:23let's select this option and let's press
- 58:24enter. So you can see system gives you
- 58:26the storage location where this material
- 58:28is already extended. So you can see this
- 58:30material is already extended to
- 58:31triple02. Now if you want to extend this
- 58:34material to another story location then
- 58:37you can simply enter that storage
- 58:38location here and you can enter the
- 58:41storage bin here which will be entered
- 58:43in the material master for that
- 58:45particular storage location. So if you
- 58:47take a drop-down system will give you
- 58:49list of all the storage locations which
- 58:51are attached to this plant. So if we
- 58:54select triple01 and let's enter a bin
- 58:56here
- 58:58and let's press enter. So you can see if
- 59:00we save this particular data then system
- 59:03will extend this material to this
- 59:05storage location and we'll enter this
- 59:08bin details in the particular field in
- 59:11the material master. So let's save this
- 59:13particular data and now let's verify by
- 59:16going to mm03.
- 59:19Let's press enter and we'll go to
- 59:22storage one view.
- 59:24We'll enter the plant and we'll enter
- 59:27the storage location01 here and let's
- 59:30press enter. So you can see the storage
- 59:32bin has been updated here. So through
- 59:34this mm SCT code you can maintain the
- 59:37storage location data in mass that is
- 59:39you can enter all the storage locations
- 59:42against which you want to extend this
- 59:44material. Now if you select this
- 59:45particular option then system will not
- 59:48give you the list of storage location to
- 59:50which the material is already extended.
- 59:52So you can see now you have a blank
- 59:53table here. So system does not show you
- 59:56to which storage location the material
- 59:58is already extended. You can select new
- 1:00:01storage locations here. So let's select
- 1:00:02this storage location and this one. And
- 1:00:06if you want you can enter the storage
- 1:00:08bins here. And if you save this system
- 1:00:10will extend this material to these two
- 1:00:12storage locations. Okay. So in this way
- 1:00:15you can extend the material to storage
- 1:00:16locations in mass. Okay. So now let's go
- 1:00:19back and you can see you have another
- 1:00:22T-code mm50 for extending material
- 1:00:25views. Now what is this T-code? Now as
- 1:00:28we discussed that against each view you
- 1:00:31maintain the data in a material master.
- 1:00:34So let's say that you have maintained
- 1:00:36the purchasing view and you want to
- 1:00:38maintain the accounting view for that
- 1:00:40material. So how you can do that? Either
- 1:00:42you can go to mm01 and create the
- 1:00:44accounting one view or you can go to
- 1:00:47this tc code mm50 and from there you can
- 1:00:50extend that material with this new view.
- 1:00:53Okay. So let's see that. So what we'll
- 1:00:55do let's first create a material code.
- 1:00:57So we'll go to mm01.
- 1:01:00We'll press enter. We'll select basic
- 1:01:02data 1 and purchasing.
- 1:01:05We'll enter the plant code here.
- 1:01:08And let's press enter. And you can see
- 1:01:11the description has been copied. The
- 1:01:12unit of measurement and material groups
- 1:01:14have been copied. Now let's go to the
- 1:01:16purchasing view. And let's save this
- 1:01:18material master. So you can see our new
- 1:01:21material code has been created. Now
- 1:01:24let's say that I want to extend this
- 1:01:26material with accounting one view. So
- 1:01:28how I can do that? So either I can go to
- 1:01:31mm01 and create the accounting one view
- 1:01:33or I can go to this mm50 and then extend
- 1:01:37this material to the new view. So let's
- 1:01:39do that. So we'll go to this T code mm50
- 1:01:42and here we'll enter our new material
- 1:01:44code. And you can see we have a field
- 1:01:47called maintenance status. Now what is
- 1:01:49maintenance status? Whenever you
- 1:01:51maintain a view for a material master
- 1:01:54system updates the material data with a
- 1:01:56particular maintenance status. If you
- 1:01:59take a drop-down you can see for each
- 1:02:01view you have a maintenance status given
- 1:02:04here. So if you maintain the purchasing
- 1:02:06view, system updates the material master
- 1:02:08with maintenance status E. If you
- 1:02:11maintain the accounting view, then
- 1:02:13system updates the maintenance status as
- 1:02:16B. Here you can see. So all these views
- 1:02:19basically correspond to this maintenance
- 1:02:21status. So whenever you maintain a
- 1:02:23particular view for a material, system
- 1:02:25updates that material master with these
- 1:02:27views. So now we have already maintained
- 1:02:30data against purchasing view and we want
- 1:02:32to maintain data against the accounting
- 1:02:34view. So if you take a drop-down for
- 1:02:37accounting you have maintenance status B
- 1:02:39here. So let's select B and let's
- 1:02:41execute. So you can see system gives you
- 1:02:44this particular line here that you want
- 1:02:47to extend this material with the
- 1:02:49accounting view. Okay. So let's select
- 1:02:51this and we'll click on maintain
- 1:02:52materials and you can see system will
- 1:02:55send me to the accounting one view. So
- 1:02:57we'll enter the valuation class here.
- 1:03:00We'll enter the moving price here. And
- 1:03:03if we press enter, so you can see now
- 1:03:05system has maintained this particular
- 1:03:07view for this material. Now let's
- 1:03:09understand the meaning of default values
- 1:03:11in this material master creation
- 1:03:13process. Now we saw that whenever we are
- 1:03:16creating the material master, we have to
- 1:03:18first select the views and then we have
- 1:03:20to enter the organizational levels. Now
- 1:03:23let's say that every time you have to
- 1:03:24select the same views and enter the same
- 1:03:26organizational levels. So how you can
- 1:03:29default that data every time you create
- 1:03:31a material master. So to default that
- 1:03:34data you have to save the default views
- 1:03:37and the default organizational levels.
- 1:03:40So let's see how we can do that. So you
- 1:03:42can see you have an option for defaults
- 1:03:44here. And if you click on industry
- 1:03:46sector, you can see you can select an
- 1:03:49industry sector which will be defaulted
- 1:03:51each time you open mm01. Okay. And you
- 1:03:55also have a check box telling that hide
- 1:03:58industry sector on initial screen. So
- 1:04:01what will happen? You select an industry
- 1:04:03sector and you select this checkbox.
- 1:04:06Then every time if you open mm01 system
- 1:04:09will not show you the industry sector
- 1:04:12input field. system in the background
- 1:04:14will automatically select the industry
- 1:04:16which you have entered here and every
- 1:04:19time we'll create the material with this
- 1:04:21industry. So let's see that. So we'll
- 1:04:23select an industry here.
- 1:04:26We'll select manufacturing here and
- 1:04:28we'll click on this checkbox and we'll
- 1:04:30press okay. So now you see the industry
- 1:04:33is removed from this input screen. So
- 1:04:36whenever you are creating a material
- 1:04:37master now you will not be entering the
- 1:04:39industry sector. system will
- 1:04:41automatically select the industry sector
- 1:04:43as manufacturing which we have already
- 1:04:46maintained in the default values. And if
- 1:04:49you want to verify the default values
- 1:04:50then again you can go to default and
- 1:04:52click on industry sector and you can see
- 1:04:54this manufacturing has been selected and
- 1:04:57again if you want to activate this
- 1:04:58industry sector then you can deselect
- 1:05:01this checkbox and click okay and you can
- 1:05:03see this industry is now available in
- 1:05:05the input screen. Now let's again go to
- 1:05:07this defaults option and let's select
- 1:05:10views here. So you can see in this
- 1:05:12dialogue box you can select what all
- 1:05:14views you want to default when you are
- 1:05:17creating the material master. So we saw
- 1:05:19that for purchasing and inventory
- 1:05:21management we had four important views.
- 1:05:23Those are basic data one purchasing
- 1:05:26storage one and accounting one view. So
- 1:05:28let's select them. So we'll select basic
- 1:05:30data one purchasing
- 1:05:35storage one
- 1:05:38and accounting one and let's press
- 1:05:41enter. So now you see we have maintained
- 1:05:45these four views as default views. Now
- 1:05:48let's press enter in this screen. So you
- 1:05:51can see system automatically selects all
- 1:05:53these four views. So you can see system
- 1:05:56selected basic data one purchasing one
- 1:05:59storage one and accounting one and this
- 1:06:01has happened because I have maintained
- 1:06:04this default setting here for the views.
- 1:06:06You can see for the views I have
- 1:06:09selected these four views as default
- 1:06:11selection. So whenever I'll press enter
- 1:06:14after entering the industry sector and
- 1:06:17material type system will automatically
- 1:06:19select these four views. And this
- 1:06:22setting I can also do by clicking this
- 1:06:24particular button here. So if you select
- 1:06:26views on this dialog box and click on
- 1:06:28this default setting system will
- 1:06:30basically save in its memory what all
- 1:06:33default views you have to select while
- 1:06:36creating the material master. Okay. Now
- 1:06:39let's see how we can enter the default
- 1:06:41values for organizational levels also.
- 1:06:43So again we'll go to this defaults and
- 1:06:45you can see the organizational levels
- 1:06:47are available here. Now let's select
- 1:06:49this particular option and here you can
- 1:06:52enter all the organizational elements
- 1:06:54which you want to default in the input
- 1:06:57screen. So you can see you can enter
- 1:06:59plan, story, location, valuation, type,
- 1:07:01sales organization and other fields and
- 1:07:04you can also enter fields from where you
- 1:07:06want to copy. Okay. So these are the
- 1:07:09default values which you can enter. So
- 1:07:11let's enter a plant code here
- 1:07:14and let's enter a story location here
- 1:07:17and let's press enter. So now again
- 1:07:20let's press enter on this screen. So you
- 1:07:22can see system automatically selected
- 1:07:24these four views
- 1:07:26and now let's again press enter. So you
- 1:07:29can see system defaulted these
- 1:07:31organizational levels also. So in this
- 1:07:34way you can save the default values for
- 1:07:36your views and default values for your
- 1:07:39organizational levels. Now let's again
- 1:07:42go to these default values. So if you
- 1:07:44select views here you can see there are
- 1:07:46two check boxes available here. One is
- 1:07:49for view selection only on request and
- 1:07:51second is create views selected. So now
- 1:07:54what is the meaning of these two
- 1:07:55checkboxes. Now if you select this
- 1:07:57checkbox then system will not give you a
- 1:08:01pop-up of views. system will simply send
- 1:08:03you to the next screen. Let's see that.
- 1:08:06So, we'll select this checkbox. Click
- 1:08:08okay. And now, let's press enter on this
- 1:08:11screen. Now, you see system did not give
- 1:08:14me a pop-up of views. System directly
- 1:08:16sent me to this organizational levels
- 1:08:19dialogue box. Now, why this has
- 1:08:21happened? Because in my default setting,
- 1:08:23I have selected that display views only
- 1:08:26on request. So if the end user request
- 1:08:28then only the views will be shown on the
- 1:08:30screen otherwise system will directly
- 1:08:33send you to this organizational level
- 1:08:35dialogue box. Now you can see there's
- 1:08:37another checkbox here which says
- 1:08:39organizational levels or profiles only
- 1:08:42on request. So these organizational
- 1:08:44levels also you can activate in such a
- 1:08:47way that system does not give you this
- 1:08:49dialogue box also. So again if you go to
- 1:08:52this default settings and if you go to
- 1:08:55organizational levels you can see we
- 1:08:57have this checkbox here that is
- 1:08:59organizational levels profiles only on
- 1:09:01request. So let's select this checkbox
- 1:09:03and click okay. And now in this screen
- 1:09:06if I press enter you can see system
- 1:09:09directly sends me to the material master
- 1:09:12maintenance screen. So system did not
- 1:09:15ask me to select the views and system
- 1:09:17did not ask me to enter the
- 1:09:19organizational level and this has
- 1:09:21happened because I have entered the
- 1:09:23default values for both these entities
- 1:09:26and I have also selected the check box
- 1:09:28where I'm telling the system that the
- 1:09:30organizational levels and the views will
- 1:09:33only be shown if the end user requests
- 1:09:36for that. If the end user does not
- 1:09:38request then you have to directly send
- 1:09:39the user to the material master
- 1:09:42maintenance screen. Okay. So how we can
- 1:09:45request that? So if we go back
- 1:09:49and again if you go to mm01
- 1:09:52now if I press enter again system will
- 1:09:54send me to the same screen but I want to
- 1:09:56enter new views here. So how I can
- 1:09:59override the default values. So for that
- 1:10:02I'll have to click on this select views
- 1:10:04here. So this button is basically to
- 1:10:06request the additional views. So let's
- 1:10:10click on this button. And now you can
- 1:10:12see all these default views are already
- 1:10:14selected and I can select more views if
- 1:10:17I want. Okay. So in this way you can see
- 1:10:21I can save default values for these
- 1:10:23views and the organizational levels. Now
- 1:10:26let's understand the meaning of this
- 1:10:27checkbox that is create views selected.
- 1:10:30Now this particular checkbox is
- 1:10:31important when you're creating a
- 1:10:33material by copying from another
- 1:10:35material master. So let's say that you
- 1:10:37have selected some views in which you
- 1:10:39want to copy the data but you do not
- 1:10:42want to navigate to each of those views
- 1:10:44while creating the material master. So
- 1:10:46if you select this checkbox then system
- 1:10:48will not ask you to navigate to each of
- 1:10:50those views. System will simply save the
- 1:10:53material code by copying the data from
- 1:10:55your existing material code. So let's
- 1:10:58see that. So now let's first go to our
- 1:10:59default settings. So we'll go to
- 1:11:00defaults and we'll go to organizational
- 1:11:02levels. And here we'll enter the
- 1:11:04reference plant and storage location.
- 1:11:06Now since we are creating the new
- 1:11:07material code, so we'll enter the same
- 1:11:09plant and story location as reference
- 1:11:11here. Okay. So what system will do?
- 1:11:14System will copy the data in this
- 1:11:16particular plant and story location
- 1:11:17combination from our existing material
- 1:11:19code to the new material code. Okay. So
- 1:11:22let's press okay. Now let's enter a
- 1:11:24material code here as a reference
- 1:11:26material and let's press enter. So you
- 1:11:29can see system copy data from our
- 1:11:31reference material to this new material
- 1:11:33code. And now I am not going to navigate
- 1:11:36to each of those views. That is I'm not
- 1:11:38going to go to the purchasing view,
- 1:11:40accounting view and story location view.
- 1:11:42I am in the basic data one view only.
- 1:11:45And I'll simply click on this save
- 1:11:46button. Now because I have selected the
- 1:11:48checkbox, so system will not ask me to
- 1:11:51go to each view. System will simply copy
- 1:11:53the data and create all those views
- 1:11:56which I have selected. So let's click on
- 1:11:58this save button. And you can see system
- 1:12:01has created this material code with all
- 1:12:03those views which I selected earlier.
- 1:12:06And this happened because in my defaults
- 1:12:09data I have this particular checkbox
- 1:12:11selected that is create view selected.
- 1:12:14So all these views which I already
- 1:12:16selected system created automatically by
- 1:12:20copying from the reference material and
- 1:12:22I did not have to go to each view and
- 1:12:25then verify that data and then save the
- 1:12:28material code. Okay, so this is the
- 1:12:30significance of this checkbox. Now let's
- 1:12:32see how we can change the material type
- 1:12:34for any material code. Let's say that
- 1:12:36you created a material with material
- 1:12:38type raw materials that is material type
- 1:12:39ro and later you found that this
- 1:12:42material type was selected wrongly. So
- 1:12:45how you can correct the material type?
- 1:12:47So for that you have code mm AM. You can
- 1:12:50see here for change material type the T
- 1:12:52code is mm AM. So if you double click
- 1:12:54this T-code you can see you can enter
- 1:12:56the material code here and you have to
- 1:12:59enter the new material type. Now always
- 1:13:02remember that if you want to change the
- 1:13:04material type then all the purchasing
- 1:13:06document must be in the deleted state
- 1:13:09and you should not have any stock
- 1:13:11available against your material code.
- 1:13:13Okay. So now let's enter the material
- 1:13:15code here
- 1:13:18and let's select a new material type
- 1:13:20here. So we'll enter finished good here.
- 1:13:23and let's press enter. So you can see we
- 1:13:25had created this material with material
- 1:13:27type ro. So the old material type is ro
- 1:13:30here and we want to change this material
- 1:13:33type to fert. So you can see new
- 1:13:35material type is fert. Now let's execute
- 1:13:38this.
- 1:13:41Let's press enter. And now you can see
- 1:13:44system will ask you to enter the
- 1:13:46valuation class because the valuation
- 1:13:48class list will change based on the
- 1:13:51material type. So here you'll have to
- 1:13:53enter the valuation class which is
- 1:13:55applicable for this new material type
- 1:13:57fert. You can see here system tells you
- 1:14:00check whether for the new material type
- 1:14:02ft the valuation classes proposed are
- 1:14:05correct or not. So system will
- 1:14:06automatically propose a valuation class
- 1:14:08which is applicable for this new
- 1:14:10material type. You can take a drop-down
- 1:14:12and you can see all the valuation class
- 1:14:14which are applicable for your new
- 1:14:16material type. So let's select any of
- 1:14:18these valuation classes and let's press
- 1:14:21okay.
- 1:14:23And you can see material type change
- 1:14:25successfully. Okay. Now where I can see
- 1:14:28the material type. So to see the
- 1:14:30material type I have to go to mm03
- 1:14:36and we'll press enter. We'll go to basic
- 1:14:38data 1. And you can see we have a icon
- 1:14:42here that is information on material.
- 1:14:45Now this is also a very important button
- 1:14:47which is there in your material master.
- 1:14:49If you click on this button you can see
- 1:14:51system will give you the administrative
- 1:14:54data which is there for this material
- 1:14:56code. You can see system will tell you
- 1:14:58the material code. The description the
- 1:15:00industry sector that you selected while
- 1:15:03creating this material code. Then the
- 1:15:05material type. Now you can see this
- 1:15:07material type has been changed to fert.
- 1:15:09Earlier this material type was RO when
- 1:15:12we created this material. Now we have
- 1:15:14changed this material type and the new
- 1:15:16material type is fert. Then it will tell
- 1:15:18you when this material was created and
- 1:15:20when it was last changed. Then it will
- 1:15:22tell you whether there is any deletion
- 1:15:24flag or logs in the material. And
- 1:15:27finally it will tell you all the
- 1:15:28statuses which are created for this
- 1:15:30material and when they were created and
- 1:15:33through which user ID these views were
- 1:15:35created. Okay. So this I button is very
- 1:15:38important. From this I button only you
- 1:15:41can see what is the material type for
- 1:15:44your particular material code. Now let's
- 1:15:46finally see how you can take a list of
- 1:15:49material for your particular plant. So
- 1:15:52to take the list of material you have
- 1:15:53tode mm60. You can see here you have
- 1:15:56this tode mm60 for material list. If you
- 1:15:59double click this, you can see you can
- 1:16:01enter material code, plant, material
- 1:16:04type, material group created by and you
- 1:16:07have this checkbox for valuated
- 1:16:09materials only. Now if you select this
- 1:16:11checkbox then system will only give you
- 1:16:14materials which are valuated. Materials
- 1:16:16which are nonvaluated or non-stock will
- 1:16:19not be given if you select this
- 1:16:21particular checkbox. If you switch off
- 1:16:23this checkbox then system will give you
- 1:16:25the nonvaluated and non-stock materials
- 1:16:27also. So you can see we have entered
- 1:16:29this material code. Now if you execute
- 1:16:31this system will give you a report
- 1:16:33containing the material code, the plan
- 1:16:35code, the description, when it was last
- 1:16:37changed, the material type, the material
- 1:16:40group, the unit of measurement and you
- 1:16:41have valuation details also like the
- 1:16:43valuation class, the price control, the
- 1:16:45price of the material and other detail.
- 1:16:48So you can see through this MM60 you can
- 1:16:50take a report for your material master.
- 1:16:52So if you go back and let's enter the
- 1:16:54plant code only
- 1:16:58and if we execute
- 1:17:01you can see in this particular plant we
- 1:17:04have all these material existing. So
- 1:17:06this MM60 is very useful if you want to
- 1:17:08take a list of all your material master
- 1:17:11in a tabular format. Okay. So in this
- 1:17:13way we discussed the whole material
- 1:17:15master maintenance process. We discussed
- 1:17:17how you can create a material, how you
- 1:17:19can change a material and how you can
- 1:17:22extend a material. We understood the
- 1:17:24meaning of multiple views for a material
- 1:17:27master and what is the meaning of
- 1:17:30maintenance status for a material
- 1:17:31master. We also understood what is the
- 1:17:34meaning of organizational levels and how
- 1:17:36they are triggered when you select a
- 1:17:38particular view. Okay. In our next
- 1:17:41video, we'll see the configuration of
- 1:17:44this material type, industry, sector,
- 1:17:46and we'll see other configurations also
- 1:17:49related to important fields of material
- 1:17:52master. So, I hope that you've
- 1:17:53understood this concept of material
- 1:17:55master maintenance. And I hope that you
- 1:17:57have liked this video. This video was
- 1:18:00specifically for end users which are
- 1:18:02working in SAP on day-to-day basis and
- 1:18:05maintaining the material master. In our
- 1:18:07next video, we'll cover the
- 1:18:09configuration part and that will be
- 1:18:11useful for MM consultants. So, see you
- 1:18:14in the next video with the configuration
- 1:18:16of the material master. Till then,
- 1:18:18please like my videos and share for
- 1:18:20maximum reach. And also, please
- 1:18:22subscribe to my channel if you haven't
- 1:18:24done yet. See you in the next video.
- 1:18:27Thank you so much for supporting me.
- 1:18:29Thanks a lot.
About this transcript
This page contains the full transcript of Material Master Maintenance in SAP MM | Complete Guide on Creation, Change and Extension by SAP MM Learning Hub, generated from the public captions YouTube serves with the video. The transcript has 13,488 words across 2,023 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.