Kowsi USB-C Power Meters — Transcript
Full transcript
- 0:00Hi there. Welcome to the lab. Today I'm
- 0:03going to have a look at these little
- 0:05USBC power meters that I picked up from
- 0:07AliExpress.
- 0:09Every time I was going on to AliExpress,
- 0:12I saw these three. There's a KWS2301C
- 0:16and a KWS2302C
- 0:18and a KWS2303C.
- 0:21And I was wondering to myself, what's
- 0:24different between all of these little
- 0:26things? They all look like they do
- 0:28pretty much the same thing. So, I
- 0:30decided to get all three of them, and I
- 0:32thought I'd make a video to show what
- 0:34they do. I'd like to ask that if you
- 0:36found this video to be helpful, please
- 0:38give it a thumbs up and subscribe to the
- 0:40channel. Questions and comments are
- 0:41always welcome. The feedback is
- 0:43appreciated, and it helps me figure out
- 0:45where to focus my activity.
- 0:50I've taken the three units out of the
- 0:52bag and at first blush
- 0:56they all look
- 0:58pretty much the same. uh they're
- 1:01successively larger in size and I'll
- 1:04rearrange them in a second so you can
- 1:06see that they seem to do more or less
- 1:09the same thing except the 2303 seems to
- 1:13also include a data graph page whereas
- 1:17the 2301 and 2302 don't have this graph
- 1:21page. We'll look at that in a minute.
- 1:24Then on the backs of these,
- 1:28there is a a button here that is used to
- 1:32change pages. But aides from that, they
- 1:35all have the same voltage
- 1:39uh range, which is from 4 to 30 volts.
- 1:42They all have the same current range
- 1:44from 0 to 12 amps. And they all have the
- 1:47same power range as a result from 0 to
- 1:50360 watts.
- 1:52There's one difference in terms of the
- 1:55total capacity. These two are said to be
- 1:59able to accumulate up to 99,999
- 2:05uh W hours. And this one is 666
- 2:12666 milliamp hours.
- 2:17I've stacked them one above the other
- 2:19and now you can see that each one is
- 2:21successively larger than the other. So
- 2:24the 2301 02 and 03.
- 2:31I have a little test setup.
- 2:33I've got the uh 2301 hooked up here with
- 2:37a power delivery trigger and this DL24
- 2:42electronic load will be the load that
- 2:44we'll use in order to test this unit
- 2:46out. Let's just turn the power on. It
- 2:50powers up and we see initially there's 5
- 2:54volts here, roughly the same voltage
- 2:57here, and there's no load here yet. A uh
- 3:02single click here will show these
- 3:04maximum values along the bottom,
- 3:08wattage, current, and voltage.
- 3:12And then I can take that away. And then
- 3:14a double click will flip the display
- 3:17over so that we don't have to
- 3:21necessarily see it the wrong way up. So
- 3:24we'll leave like that. Now,
- 3:28uh, one of the things that tends to
- 3:29happen, especially when changing modes
- 3:32here that I've noticed is that that'll
- 3:35often create a little bit of current
- 3:37draw, and it'll cause the timer here to
- 3:41advance. That may or may not be a big
- 3:44deal. If it's a short test, that might
- 3:45be a big deal. For a long test, it won't
- 3:47really be a big deal. Now, I'm going to
- 3:50start the DL24.
- 3:52Let's just make sure we've got good
- 3:54contact there. got the voltage.
- 3:57And so now we can see that there's some
- 4:00current here,
- 4:02roughly the same amount of current here,
- 4:03but it is a little high by about uh
- 4:08you know 30 or 40 milliamps.
- 4:11And as a result, the power that's
- 4:13reflected here is also a little high
- 4:16compared to what we would expect the
- 4:17power to be. We can see at the bottom
- 4:20the direction of current flow on the
- 4:23display here.
- 4:26and the accumulated values for capacity
- 4:28in millowatt hours.
- 4:32Now I'm going to take the voltage up.
- 4:38So now that's close to 9 volts. The same
- 4:42load. Uh that takes the power up. I'm
- 4:46going to take this up again. 12 volts
- 4:51again. 15 volts. and once more to 20
- 4:54volts.
- 4:57It does do a reasonable job of
- 4:59reflecting the voltage.
- 5:01The the current reading here tends to be
- 5:04a little high. I'm now just going to
- 5:06bump this up a little more. We'll take
- 5:09it to half an amp. The fan has come on
- 5:12to keep the unit cool.
- 5:15The current reading here now
- 5:19a little more accurate. Maybe, maybe
- 5:22not. Uh, not off by as much. I'm just
- 5:24going to take it damp to a full amp.
- 5:28And once again,
- 5:30it seems like the current is uh well,
- 5:34now it's pretty good actually.
- 5:36Well, now it's a little high, but we can
- 5:38see the runtime accumulating and the uh
- 5:42total power that is transited through
- 5:44the unit accumulating.
- 5:48And if I press that, we can see here
- 5:50that the the maximum
- 5:52wattage was 20.6, the maximum current
- 5:55was 104, and the maximum voltage uh was
- 5:5920.2.
- 6:02We'll go back to that display. Now, one
- 6:05of the really nice things about this,
- 6:09I'm just going to stop this for a
- 6:10second. So, that's stopped and it's no
- 6:13longer running. So, it's not tracking
- 6:14anymore. But one of the really nice
- 6:16things about this unit is I can turn the
- 6:18power off.
- 6:20Just remember that's showing two hours,
- 6:22sorry, 2 minutes of run time.
- 6:26So power's off there.
- 6:28And in case you're worried, I'll unplug
- 6:31it from the uh unit to make sure it's
- 6:34not getting c power from anywhere.
- 6:37And I turn it back on.
- 6:42the values here for runtime,
- 6:46uh, milliamp hours and millowatt hours,
- 6:48they're preserved. So, these values are
- 6:50preserved until I manually reset them,
- 6:54which is great if you're trying to
- 6:56figure out how much power is used in a
- 6:59charge cycle or how much power is used
- 7:00by a device.
- 7:02So, that's one of the really nice things
- 7:04about this meter because a lot of units
- 7:08that I've used don't preserve that
- 7:10value. And if you get a power
- 7:12interruption or if something gets
- 7:13disconnected for a second, you lose all
- 7:15of that data, which is a big hassle.
- 7:22Now, with the 2302,
- 7:24I'm going to turn the power on,
- 7:27and it announces itself. And we can see
- 7:30it's showing
- 7:325.03 volts.
- 7:35Uh, I've got the 200 milliamp.2 amp load
- 7:38there. The information shown on the
- 7:40display on the 2302 is pretty much the
- 7:43same as what we saw on the 2301 except
- 7:46it's now color.
- 7:49Uh, and we have the same single click to
- 7:52show these maximums
- 7:55and a double click flips the display
- 7:57over.
- 8:00Okay, I'm now going to start the load.
- 8:08And the current here seems to read a
- 8:12little more accurate than uh on the
- 8:152301. And as a result, the power seems
- 8:19to read a little more accurate. And
- 8:20there's a better correspondence
- 8:23with uh the DL24.
- 8:25I'm now just going to uh let's take the
- 8:28voltage up.
- 8:31Take it up to
- 8:35that's 9 volts,
- 8:3912 volts,
- 8:4315
- 8:47and 20.
- 8:51And once again, still good
- 8:52correspondence on the current. Let's
- 8:54take it up to half an amp.
- 8:57The fans come on
- 9:02and you can see as it settles in 0.5
- 9:05here
- 9:06pretty close to 0.5 there. The numbers
- 9:09of course jitter a little bit.
- 9:12So it seems that the 2302 is a little
- 9:15more accurate than the 2301.
- 9:18And then we see the accumulated values
- 9:20here, the temperature and the uh
- 9:24direction of current flow.
- 9:26And I think that the slightly larger
- 9:29display uh also in color of the 2302
- 9:33makes this a really nice uh choice.
- 9:37It it seems to work a little better, a
- 9:40little more accurately than the the
- 9:422301. Let's come up to one full amp now
- 9:45for a second.
- 9:53And so you can see it sort of takes a
- 9:55little bit of time.
- 9:58It is maybe off by uh a little bit here,
- 10:03but uh but pretty good overall. And just
- 10:06like the 2301, I'm just going to stop
- 10:09this and turn the power off for a
- 10:11second.
- 10:13So the power's off,
- 10:15power is back on, and the values are
- 10:18preserved across power cycles. So
- 10:20anything that you've been doing where
- 10:22you're trying to accumulate a result to
- 10:24know how much power was used during a
- 10:26session, you don't lose that if the
- 10:28power goes off.
- 10:33Now I've got the 2303
- 10:36set up. I'm just going to turn the power
- 10:37on here.
- 10:41There's no model announced here on the
- 10:432303.
- 10:45The display is bigger and so all of the
- 10:48information is shown at the display or
- 10:51on the display all at once. So we have
- 10:53all the maximums here. We don't need to
- 10:56sort of toggle in order to see those
- 10:58maximums.
- 10:59We have the accumulated values here. And
- 11:03even though we're not running, you can
- 11:05see something is making it think we're
- 11:07running. And so it's accumulating some
- 11:08runtime here or power on time, but no
- 11:12power is actually coming through here.
- 11:15One of the things that the 20303 has
- 11:17that the other two models don't have is
- 11:20it shows the voltage on the the D plus
- 11:22and the D minus lines.
- 11:26And uh we've got 5 volts. That's 5 volts
- 11:30coming through here. And now I'm just
- 11:32going to turn the power on.
- 11:38And so we can see the
- 11:40current here, the wattage, and a lot
- 11:44more digits of precision. It's not clear
- 11:47uh how accurate that is, but you can see
- 11:50that in terms of current, it's showing
- 11:5302 much more closely and much more
- 11:56reliably than we'd seen on the other two
- 11:58models.
- 12:00Couple of other things here that I can
- 12:02do. A single click brings me into this
- 12:05grid display.
- 12:08And the four here is the number, the
- 12:11volts per cell. The 0.1 is the current
- 12:14per cell. And uh 5 minutes is the
- 12:17overall time in this tracking display.
- 12:20We've got the uh actual voltage right
- 12:23now, the actual current right now, the
- 12:25actual wattage.
- 12:27One more click here brings us a very
- 12:30simple display where we don't have the
- 12:33density of information and so may be a
- 12:35little easier to read.
- 12:38And then another click brings us back to
- 12:40the very sort of informative, very dense
- 12:44display here.
- 12:46I'm now just going to bring the voltage
- 12:48up.
- 12:51Now, one thing to notice with this model
- 12:53as I bring the voltage up is the voltage
- 12:56doesn't
- 12:58uh rapidly transition. It sort of counts
- 13:01up. So, watch what happens. Five
- 13:06that sort of rises
- 13:08to 9
- 13:12and 12 and it rises to 12.
- 13:1715 and it rises to 15.
- 13:23And then similarly for 20. So the
- 13:27voltage transitions actually coming from
- 13:30the power supply are pretty abrupt. Uh
- 13:34this transition as it's sort of
- 13:36illustrated or animated on the 2303 is
- 13:40uh a simulation I guess for some
- 13:42purpose.
- 13:44Maybe for some internal tracking. Uh,
- 13:48now I'm just going to bring the current
- 13:49up wh half an amp.
- 13:57And so that seems to track much better
- 13:59at 499 than the other two models.
- 14:04Now a full amp.
- 14:11And it takes a while because of the way
- 14:13it transitions, but it's showing that
- 14:15full amp. And the value does correspond
- 14:18more closely to what we're seeing in the
- 14:21DL24.
- 14:23And then
- 14:25a single click there shows the graph.
- 14:30And that'll advance slowly.
- 14:34Double click flips that over.
- 14:38Another double click. Now, one of the
- 14:39things that we can do here that I tend
- 14:42to be reluctant to do is uh a long press
- 14:46will change the time
- 14:49uh interval on this graph. So, currently
- 14:52it's 5 minutes, but if I hold it down
- 14:55for a while, and it doesn't update until
- 14:59I release the button. So, when I release
- 15:01the button now, it's changed to 15minute
- 15:04interval. Although that doesn't seem to
- 15:07Oh, there. Now that's updated.
- 15:09Another long press.
- 15:16Okay. When I release it changes to a
- 15:1860-minute interval. And it's a little
- 15:20bit unnerving because the other thing
- 15:22that long presses do is they uh clear
- 15:25out all the accumulated data. And I
- 15:27don't want to clear out the data. Uh we
- 15:30can go from 60 minutes. I think there's
- 15:32one more interval.
- 15:37two hours
- 15:46and then back to 5 minutes. And I hope I
- 15:48haven't lost any accumulated data here.
- 15:51We'll see on the next update if I get my
- 15:53values back.
- 16:00So it looks like perhaps it doesn't
- 16:02preserve the uh accumulated data
- 16:07through those long press cycles which is
- 16:10a little bit disappointing. So it really
- 16:12means that you need to determine your
- 16:14resolution in advance in terms of when I
- 16:17say resolution the time resolution in
- 16:19advance
- 16:20because the one thing that it does do
- 16:23which I think is fantastic is it keeps
- 16:26track of all of this information like
- 16:28let's take the current down here
- 16:32so we can see the current line is
- 16:34dropping over here
- 16:39and the voltage line It's purplish here
- 16:42because it's current and voltage are up
- 16:44here. But we can see the blue voltage
- 16:46line there. But if I turn the power off
- 16:49now,
- 16:52okay, well DL24 thinks we're done.
- 16:56When I turn the power back on,
- 16:59all of that information is still there.
- 17:01It's still preserved. And I mean, it's
- 17:04true on all of these units. I just think
- 17:06it's fantastic that this um logging
- 17:09chart is preserved through power cycles
- 17:13and and so that makes these units really
- 17:15really useful for tracking data uh
- 17:19because an inadvertent power blip or
- 17:22something inadvertently getting
- 17:23disconnected is not going to cause you
- 17:25to lose all of that data.
- 17:28So that's
- 17:29really really nice. Now, of course, uh
- 17:32the um current dropped to zero, but
- 17:35let's turn this back on and the current
- 17:38will start to come back up.
- 17:42The simple display,
- 17:44the complex, very informative display.
- 17:49So, just a lot of information available
- 17:52here. Uh fairly sophisticated power
- 17:55meter. And so if you were tracking
- 17:57something like perhaps there was a a
- 17:59battery or a charge cycle you were
- 18:02running through and you wanted to sort
- 18:03of see what that charge cycle looked
- 18:05like, this graph is is just a fantastic
- 18:09way to get that information.
- 18:12And the only thing I wish it did is I
- 18:15wish that it would not lose the the data
- 18:19as you change the uh time resolution.
- 18:25Now, just for fun, I've got them all
- 18:28hooked up. I'm going to turn the power
- 18:30on.
- 18:35And we can see all three of them are
- 18:39in action, hooked up in sequence. I'm
- 18:42gonna turn the load on
- 18:51and we can see the load
- 18:54as the power flows through the the
- 18:57different units.
- 19:00Also, you can see and I didn't notice
- 19:02this before, but
- 19:05the 2301
- 19:07shows one digit of voltage, two digits
- 19:10on current.
- 19:11one digit on power. The 2302 is showing
- 19:15two digits on voltage, three digits on
- 19:17current, two digits on power, and then
- 19:20the 2303 is showing a lot of digits. I
- 19:23wonder if it really has that much
- 19:25resolution on the voltage, the current,
- 19:28and the power. So overall, these units
- 19:32are really nice for power metering
- 19:36if you want to find out what's happening
- 19:38if you're charging a a device and peak
- 19:42into what's really going on in that USBC
- 19:45cable.
- 19:47The accuracy
- 19:50sometimes seems to be a little bit
- 19:53questionable, but as the current uh sort
- 19:57of trends towards higher values, it does
- 20:00seem that the accuracy improves.
- 20:04And the 2303
- 20:08is uh very good in terms of its accuracy
- 20:11and this tracking chart is really
- 20:13fantastic. And then overall the fact
- 20:16that all of them preserve their values
- 20:20through power cycles just to me makes
- 20:22these all phenomenally useful uh power
- 20:25meters. Okay, well that's everything.
- 20:29If you found this video to be helpful,
- 20:31please give it a thumbs up and subscribe
- 20:33to the channel. Thanks for watching and
- 20:36until next time.
- 20:39[Music]
- 20:52Heat.
About this transcript
This page contains the full transcript of Kowsi USB-C Power Meters by JTech Labs, generated from the public captions YouTube serves with the video. The transcript has 2,639 words across 417 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.