YouTube2Text

Introduction to Operational Amplifier: Characteristics of Ideal Op-Amp — Transcript

by ALL ABOUT ELECTRONICS · 2,210 words · 186 segments · language en · Watch on YouTube

Full transcript

  1. 0:19Hey friends, welcome to the Youtube Channel ALL ABOUT ELECTRONICS.
  2. 0:22So, in this video, we are going to talk about the basics of the operational amplifier.
  3. 0:28And in the upcoming videos, we will talk more about this operational amplifier.
  4. 0:32And we will see, how we can design the different circuits using this operational amplifier.
  5. 0:36So, as its name suggests, this op-amp is basically amplifier.
  6. 0:41And the basic job of an amplifier is to amplify the input signal.
  7. 0:46Now, let's understand why it is known as the operational amplifier.
  8. 0:50So, in early days when digital computers were not evolved, at that time the different mathematical
  9. 0:56functions like addition, subtraction, integration, and differentiation were performed using this
  10. 1:02operational amplifier.
  11. 1:03So, just by connecting few resistors and capacitors, it is possible to perform the different mathematical
  12. 1:09operations.
  13. 1:11And that is why this amplifier is known as the p[erational amplifier.
  14. 1:15So, now if you see this circuit symbol of the operational amplifier, it can be represented
  15. 1:20by this symbol.
  16. 1:21So, it consists of two inputs and one output.
  17. 1:26And most of the operational amplifiers consist of two power supplies.
  18. 1:29The positive and the negative power supply.
  19. 1:31But there are many op-amp IC's which runs on the single power supply.
  20. 1:36So, now in this operational amplifier, the input terminal which is marked by this positive
  21. 1:41sign is known as the non-inverting input terminal and another input terminal which is marked
  22. 1:46by this negative sign is the known as the inverting input terminal.
  23. 1:50And it will get cleared to you very shortly why it is known as the non-inverting as well
  24. 1:55as the inverting input terminals.
  25. 1:57So, now if you see this operational amplifier, it is one kind of differential amplifier with
  26. 2:01the signle output.
  27. 2:03It means that this amplifier amplifies the difference between the two input signals.
  28. 2:08So, let's say V1 and V2 are the input signals which is being applied to this operational
  29. 2:13amplifier and let's say the gain of this operational amplifier is A, then the output will be equal
  30. 2:19to A times the V1 minus V2.
  31. 2:23So, let's say if we have applied the single input to this operational amplifier and we
  32. 2:28have grounded another input terminal then at the output you will get A times V1.
  33. 2:34Where A is the open loop gain of this operational amplifier.
  34. 2:39The reason it is being known as the open loop gain is that it is the gain of the operational
  35. 2:44amplifier when there is no feedback from the output to the input side.
  36. 2:48So, suppose if you are applying the sinusoidal signal over here, then at the output that
  37. 2:53sinusoidal signal should be get multiplied by the factor of this gain and at the output,
  38. 2:59you should get the amplified sinusoidal signal.
  39. 3:02Now, here the phase of this output voltage will be the same as the input voltage.
  40. 3:07Likewise, whenever we are applying input to this negative terminal, and we are grounding
  41. 3:13another terminal then the output of this amplifier will be equal to minus A times the V2 because
  42. 3:20the difference between these two input terminals will be equal to 0 minus V2, that is equal
  43. 3:26to minus V2.
  44. 3:27So, suppose let's say if we are applying the sinusoidal signal at the input then at the
  45. 3:32output we will get the amplified sinusoidal signal which is having a 180-degree phase
  46. 3:37with respect to the input signal.
  47. 3:40That means the output will be get inverted by 180 degrees.
  48. 3:43And that is why this input terminal is known as the inverting terminal.
  49. 3:48Because the output will be get inverted with respect to the input.
  50. 3:52So, now here suppose if we apply the input signal between these two positive and the
  51. 3:57negative terminals then at the output we will get A times this differential input signal.
  52. 4:03Where here this A represents the open-loop gain of this operational amplifier.
  53. 4:08Now, this operational amplifier is a very high gain amplifier.
  54. 4:12And the value of gain used to be in the range of 10 to the power 5, to the 10 to the power
  55. 4:176.
  56. 4:18So, let's say, even if we apply the 1 mV of a signal between these two terminals, and
  57. 4:24let's say if the gain of this op-amp is 10 to the power 5, then at the output theoretically
  58. 4:28we should get 1 mV signal that is multiplied by the 10 to the power 5.
  59. 4:35That is equal to 100V.
  60. 4:38Or let's say if we apply 1V of a signal, then theoretically, we should get the output as
  61. 4:4410 to the power 5 volts.
  62. 4:46But that is not possible.
  63. 4:48And the output of this op-amp is restricted by the biasing voltages that are being applied
  64. 4:54to this op-amp.
  65. 4:55So, the output voltage will be between these biasing voltages.
  66. 4:59So, if you see the voltage transfer curve of op-amp then it will look like this.
  67. 5:05So, here this X-axis represents the differential input that is applied to this operational
  68. 5:11amplifier. and the Y-axis represents the output voltage
  69. 5:15of the amplifier.
  70. 5:16And here the slope basically represents the gain of the amplifier, which used to be in
  71. 5:22the range of 10 to the power 5 to the 10 to the power 6.
  72. 5:25Now, here let's say if the gain of the op-amp is 10 to the power 6.
  73. 5:29And let's say we are applying 1 microvolt of a signal.
  74. 5:33Then at the output, we should get 1V of a signal.
  75. 5:36Likewise, let's say if we apply 10 microvolts of a signal, then at the output, we will get
  76. 5:4110 V of output.
  77. 5:43But as we increase this input signal, then we will find that after some value of input
  78. 5:50signal, the output will get saturated to the value +Vsat, which used to be less than the
  79. 5:55positive biasing supply.
  80. 5:57So, in this way, as soon as the input voltage goes beyond some certain value, the output
  81. 6:02will be get saturated to the plus saturation voltage.
  82. 6:06And same is true for the negative input voltages.
  83. 6:09So, as soon as the input voltage goes beyond some threshold value at the output you will
  84. 6:15get minus saturation voltage.
  85. 6:17So, whenever this operational amplifier is used in open loop configuration that means
  86. 6:22there is no feedback from the output to the input side, at that time even if we apply
  87. 6:27small input signal between these two input terminals, then also you will find that the
  88. 6:32output will be get saturated towards the positive or the negative biasing voltages.
  89. 6:37So, this particular characteristic of the op-amp is particularly useful when we use
  90. 6:42this op-amp as a comparator.
  91. 6:43So, this is one of the applications in which this op-amp can be used.
  92. 6:47But if you see this op-amp, this op-amp can also be used in som any other applications.
  93. 6:52Like, in designing the active filters, oscillators, waveform converters and analog to digital
  94. 6:57and digital to analog converters.
  95. 6:59And if we count the list, then the list will go on.
  96. 7:03So, basically this op-amp is very versatile IC and you will find this op-amp in so many
  97. 7:08applications.
  98. 7:09Now, the reason this op-amp is used in so many application is because of its different
  99. 7:14characteristics.
  100. 7:15So, let's see the different characteristics of the op-amp because of which it is so versatile
  101. 7:20and it is being used in different applications.
  102. 7:22So, before we see that let's see the equivalent circuit of the op-amp.
  103. 7:26So, as you can see here, this Ri is the input impedance of this op-amp.
  104. 7:31Likewise, this Ro represents the output impedance of this op-amp.
  105. 7:35And the output voltage of the op-amp will be the open-loop gain multiplied by the difference
  106. 7:40between the input signals V1 and V2.
  107. 7:43So, now before we see the different characteristics of the op-amp, let's see the different characteristics
  108. 7:48of the ideal op-amp.
  109. 7:49So the ideal op-amp should have this input impedance Ri that is equal to infinity.
  110. 7:54So, that whatever input that is being applied between the input terminals will directly
  111. 8:00get applied to the op-amp.
  112. 8:02Similarly, the output impedance of this op-amp should be equal to zero.
  113. 8:07That means whenever we are applying the output load to this op-amp then the output voltage
  114. 8:13should directly come across this output load.
  115. 8:16Then if you see the bandwidth of the ideal op-amp, the bandwidth of the ideal op-amp
  116. 8:20should also be equal to infinity.
  117. 8:22It means it should support all the frequencies starting from the zero Hertz to the infinite.
  118. 8:28Similarly, the gain of the ideal op-amp should also be equal to infinite.
  119. 8:33Apart from that whenever these two input terminals are zero, that means the input to this op-amp
  120. 8:39is zero, at that time the output of this ideal op-amp should be equal to zero.
  121. 8:43Now, apart from these characteristics, there are few more characteristics of the ideal
  122. 8:49op-amp that is slew rate and the common mode rejection ratio.
  123. 8:55So, will see more about these different characteristics in detail in separate videos.
  124. 9:01But let's see the basics of this different characteristics.
  125. 9:04So, in a simple way, if I say, the slew rate is basically how fast the op-amp is able to
  126. 9:10reach its final value.
  127. 9:12In that is particularly useful when we are applying a square wave to the op-amp.
  128. 9:17So, let's say we have applied the square wave to the input of this op-amp and at the output,
  129. 9:23we are getting this output waveform.
  130. 9:26That is varying from zero volts to the V saturation voltage.
  131. 9:31So, the ideal op-amp should be able to reach from the zero volts to the Vsat volt in zero
  132. 9:36time.
  133. 9:37So for the ideal op-amp, the slew rate should be equal to infinity.
  134. 9:41Generally, this slew rate is defined in the unit of Volt per microseconds.
  135. 9:47That means the how fast the op-amp is able to respond to the output voltage.
  136. 9:52Then there is another parameter, which is known as the common mode rejection ratio.
  137. 9:57So, let's understand very briefly what do we mean by this common mode rejection ratio.
  138. 10:02We will talk more about it in a separate video.
  139. 10:05So, let's say if we are applying the same input voltage to this V1 and V2 then the difference
  140. 10:10between these two voltages will be equal to zero and at the output, we should get zero
  141. 10:15volts.
  142. 10:16Likewise, when we are applying different input voltages V1 and V2 to this op-amp then at
  143. 10:22the output the difference between these two voltages will be get amplified by certain
  144. 10:26amplifier gain.
  145. 10:27So, this common mode rejection ratio basically defines how well the op-amp is able to reject
  146. 10:33the common input voltages that are being applied to both its input terminals and how well it
  147. 10:39is able to amplify the difference between the two voltages.
  148. 10:42And it is generally defined as the ratio of differential gain divide by the common mode
  149. 10:48gain.
  150. 10:49So, for the ideal op-amp, the value of this common mode rejection ratio should be equal
  151. 10:53to infinity.
  152. 10:54So, here is the list of different ideal op-amp characteristics.
  153. 10:58So the ideal op-amp has infinite input impedance, zero output impedance, infinite open loop
  154. 11:04gain and infinite bandwidth and slew rate.
  155. 11:08And in this ideal op-amp, whenever the input is equal to zero then at that time the output
  156. 11:14is also zero.
  157. 11:15And this ideal op-amp has infinite common mode rejection ratio.
  158. 11:20But if you see any practical op-amps, they used to have finite input as well as the output
  159. 11:25impedance.
  160. 11:26Generally, this input impedance is in the range of megaohms, while the output impedance
  161. 11:31is in the range of few ohms.
  162. 11:33Similarly, the open loop gain of the op-amp is not infinity but it used to be in the range
  163. 11:39of 10 to the power 5 to the 10 to the power 6.
  164. 11:42Likewise, for the practical op-amps, when the input is equal to zero, at that time also
  165. 11:47you will get some output at the op-amp.
  166. 11:50Generally, it used to be in the range of few mV.
  167. 11:54That is known as the offset voltage.
  168. 11:56And we will talk more about it in the separate video.
  169. 11:58So, here is the list of different parameters and the values of different parameters for
  170. 12:02the general purpose 741 op-amp IC.
  171. 12:05So, now if you see the different op-amp ICs, they are optimised for the different parameters.
  172. 12:10So, let's say if one op-amp is optimised for the very high slew rate, while another op-amp
  173. 12:16is optimised for the very high open loop gain.
  174. 12:19And if you see some other IC, you might find that it is optimised for the very low offset
  175. 12:24voltages.
  176. 12:25So, depending upon your application you need to decide which parameter is critical for
  177. 12:30your application and based on that you can decide which op-amp is suitable for your particular
  178. 12:36application.
  179. 12:37Now, so far we have seen this op-amp in open loop configuration.
  180. 12:41That means, there was no feedback from output to the input.
  181. 12:45Now, in the next video, we will see what happens when we provide the feedback from the output
  182. 12:50the input side.
  183. 12:51So, I hope in this video you understand the different characteristics of this op-amp.
  184. 12:56So, if you have any questions or suggestion do let me know in the comment section below.
  185. 13:00If you like this video hit the like button and subscribe to the channel for more such
  186. 13:07videos.

About this transcript

This page contains the full transcript of Introduction to Operational Amplifier: Characteristics of Ideal Op-Amp by ALL ABOUT ELECTRONICS, generated from the public captions YouTube serves with the video. The transcript has 2,210 words across 186 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.