Inside the HiBrew H10 — Transcript
Full transcript
- 0:01What's up everyone? Lance Hedrickk here
- 0:03and today on the unfiltered channel.
- 0:05Don't mind the mess in here. Uh I I I'm
- 0:08showing you the insides of the Hibbru
- 0:09H10. So I just filmed uh my video for
- 0:12the main channel, the full review on it.
- 0:14Um which will be out once this is out.
- 0:17But um anyway, in that video, because
- 0:20of, you know, the price point of the
- 0:22machine, etc., I didn't want to mess
- 0:23around taking it apart and screwing
- 0:25around too much with it on that video.
- 0:27So I'm doing it now. So, that's kind of
- 0:28a compliment to the main video. But
- 0:30anyway, um this is a heavy hitter
- 0:33machine for the price point. It's like
- 0:35$270 and it's got P controller. It's got
- 0:39uh pressure gauge. It's got an OPV um
- 0:41and and built-in pre-infusion and
- 0:43different things like that. So, pretty
- 0:45neat little machine that's quite cheap.
- 0:48Anyway, I wanted to open it up to Uhoh.
- 0:52My my phone's making noise. That's
- 0:53unprofessional. We're unfiltered here.
- 0:56I have my live pulled up so I can see
- 0:58the chat. Okay. Um, for those wondering,
- 1:00this is live for people in my Patreon.
- 1:02But anyway, let's get to the machine.
- 1:04So, I went ahead and pulled off the top
- 1:05panel. There's six screws in order to
- 1:07get that off for y'all to see the
- 1:08machine. I guess it's the Hibbrew small.
- 1:11There's a water reservoir that goes
- 1:13here, but I went ahead and removed it.
- 1:14Um, but yeah, for those for the majority
- 1:17watching this, you will have already
- 1:18seen the main video, I imagine. But
- 1:20anyway, we have the top off and it's
- 1:22because I wanted to show some things
- 1:23inside that I talk about in my main
- 1:25video which includes the thermal block
- 1:28and the group head uh and the material
- 1:30of the group head. Now, this is not shot
- 1:32like normal with Ugo. This is just me on
- 1:34a laptop and that's why it's on the
- 1:36unfiltered channel. But anyway, here's
- 1:37what the insides look like. So, as you
- 1:40can see, let's get a light right on
- 1:42this.
- 1:44Boom. All right. So, what you can see in
- 1:46here is down here we have the group
- 1:48head. Now, the group head is made of
- 1:50some sort of composite material with
- 1:51plastic and glass. Um, so it has really
- 1:54great heat resistance, but obviously
- 1:56that's a pretty cheap uh a pretty cheap
- 1:58cheap like polymer that they're using
- 2:00there. Uh, which will obviously be a
- 2:02turnoff for a lot of people. But I
- 2:03thought it was important to kind of
- 2:04point that out because as many positives
- 2:06as this machine has, that can be seen as
- 2:08a downside for lots and lots of people,
- 2:11especially with the growing fear of
- 2:12microplastics and different things like
- 2:14that. But this is something that's used
- 2:15in a lot of prototyping. It's obviously
- 2:17food safe. Um, but it's it's it's pretty
- 2:20resistant and I can't imagine it wearing
- 2:22down anytime soon. And a big part of
- 2:24that is because the thermal block is
- 2:26here. So all the heat radiating.
- 2:30So all the heat radiating off of that is
- 2:32not it should not be affecting the group
- 2:34head which is sunk lower into the
- 2:35machine than the thermal block itself
- 2:37which is right here and made of
- 2:38aluminum.
- 2:40So we have that group head down there.
- 2:42We have the thermal block over there.
- 2:43Then of course we have our power board
- 2:45right here.
- 2:47All right. And then back here we have
- 2:48some of the electronic boards for the
- 2:50front screen which on the front screen
- 2:53we have these four buttons which have
- 2:54different uh different combinations in
- 2:57order to control all the different
- 2:58features of this machine. But what I was
- 3:00wanting to do in this video is I don't
- 3:02uh I have not actually taken the full
- 3:04top off in order to see where the OPV
- 3:06is. But I am considering
- 3:08uh you can see the OPV from the top and
- 3:10it's housed right here in the video. I
- 3:12said here I was wrong. It's actually
- 3:14right back here. Um, in the first video
- 3:15I saw where someone was disassembling
- 3:17it, I just got a little confused on
- 3:18which side they were holding it. But
- 3:20anyway, I think there's a way you could
- 3:22drill a hole here in order to change the
- 3:24OPV manually. So, I'm going to try to
- 3:26take off this top part, see which screws
- 3:29uh allow for that, and then maybe we'll
- 3:30have a little fun and drill a hole in
- 3:32here and play around with the OPV. Uh,
- 3:34and that cuz that hole will be hidden by
- 3:35the water tank, the water reservoir
- 3:36anyway. And it's just a little piece of
- 3:38plastic back here. The rest of this
- 3:40casing is a thin piece of stainless
- 3:41steel. Um, so it's, you know, I I show
- 3:44in the video, but we'll we'll show
- 3:45again. Uh, like it has some magnet
- 3:48magnet properties about it. See that?
- 3:52Fun. Okay. Uh, but it's not very strong,
- 3:54which leads me to believe it's
- 3:55incredibly thin. But, um, yeah. So,
- 3:58we're being chaotic here. This it's a
- 4:00chaotic day. So, I'm going to see which
- 4:02screws are needed in order to take this
- 4:04part off of here because, like I said,
- 4:07the OPB is down in here. And you can
- 4:09actually see it right. Ah, it's hard to
- 4:11point from this angle. You can see it
- 4:14right down there. That's the OPV. I'm
- 4:18trying to get that light on it. So,
- 4:20right down there, you can kind of see
- 4:21it,
- 4:23maybe. But now, you'll see it here in a
- 4:24second anyway, regardless. Okay. Okay.
- 4:28There's Is that all of them? Yep. Okay.
- 4:31So, there is a water cord. I need to
- 4:33disconnect this one right here. Okay.
- 4:39Okay. But the issue is is I do need the
- 4:41needlense for this. I cannot get that
- 4:43with my fat sausage fingers.
- 4:46Where did my needle pliers go?
- 4:50I do not know. I do not know.
- 4:54Ah, you son of a gun.
- 4:59Where are my needles pliers? Where are
- 5:00my needles pliers? I know I have a pair
- 5:02in the basement, but that's a I don't
- 5:04want to go down there. I should have one
- 5:05up here, and I don't know where they
- 5:07are. Oh, I have tweezers. That'll work
- 5:09just fine. Why do I have tweezers in
- 5:11here? I don't know. I don't know. But
- 5:13the mother father. Okay, it looks like
- 5:14we did it without needing to take that
- 5:16out. I hope I didn't rip any
- 5:19We're good. We're good. Thinking of just
- 5:22making a hole there regardless and then
- 5:24figuring it out once I can actually
- 5:26access it a bit easier. So, again, to
- 5:27show people, we got the machine open.
- 5:29OPV sitting right down here. And uh I've
- 5:32seen from this uh guy in Russia had his
- 5:38video and he showed that once it comes
- 5:40once you get to it there's a screw to
- 5:42turn but again where the screw should be
- 5:44there's like a cap that's blocking me
- 5:46and it's really frustrating me
- 5:50you little toot. So the the the
- 5:52vibratory pumps down here below the OPV.
- 5:54I don't know if you can see it. Uh let's
- 5:56get that angled. I don't know if you can
- 5:58see it. Let's get my phone camera light
- 6:00thing. Okay. Oh, shiza.
- 6:04This is hard to balance and do on my
- 6:06own.
- 6:08Inception
- 6:10right down there. Can y'all see that?
- 6:12Maybe.
- 6:16There you go.
- 6:17Okay. If y'all couldn't see that, you're
- 6:19not going to. Uh, but that's where the
- 6:21vibratory pump is. So, you could do the
- 6:23dimmer mod on this, but I tell you what,
- 6:25I Well, I guess you could take the
- 6:27screws out of the bottom and the bottom
- 6:28would lift off. Maybe I should have done
- 6:29that. Uh, I can see where the pump is
- 6:32screwed into the bottom. Pretty pretty
- 6:35easy to get to. The issue is this top is
- 6:37going to stop your fingers. And it's
- 6:39like molded like this. So, there's no
- 6:41real way to access it without maybe
- 6:43breaking something. No, this is just
- 6:44clamped in. Okay. You know what? I think
- 6:47if I peel back gingerly enough,
- 6:51these are just okay. The the the the
- 6:54stainless steel is just clamped around
- 6:55this back panel. I think actually I
- 6:57could get that out if I
- 7:01No, that'll break the plastic.
- 7:05Those little those little turds really
- 7:09wanted to make this difficult to open,
- 7:12which I get. I get it.
- 7:14But, uh, I'm not very happy about it.
- 7:18No, I'm not. I'm a little peeved.
- 7:22All right.
- 7:25Well,
- 7:29I'm going to get in there and I may just
- 7:32take my drill out to do it.
- 7:35God, that's so thin pl such thin
- 7:37plastic. I may not even need a drill,
- 7:38honestly. What people say in the chat?
- 7:41There's Hungarian shop that sells the
- 7:42same machine. And they call it AVXDB1.
- 7:45The you're talking about the legato
- 7:48thing. I'm prepar U uh get in there. Get
- 7:50in there. I mean,
- 7:52it really doesn't matter cuz that's
- 7:53where the water reservoir sits. So,
- 7:54it'll be hidden. So, when I do end up
- 7:56giving it away, the person shouldn't be
- 7:58that mad. It's not like it's doing
- 7:59anything. I mean, I guess technically
- 8:01it's not allowing water from the tank to
- 8:03get in here, but there should that
- 8:04shouldn't be an issue. The water goes
- 8:06down into a plunger or into a little
- 8:08valve right down here. Beep beep. And
- 8:11then it go sucks down up through a tube
- 8:13here through the pump and then up into
- 8:14the the head of the machine. So it
- 8:17shouldn't be a big deal. And if it is,
- 8:18they could always just, you know, put a
- 8:19little something something there. Little
- 8:20duct tape never hurt nobody. Uh
- 8:24yeah, this is really peeing me. Let's
- 8:27see if I can get enough strength of this
- 8:31to pop that off. Ha. I just need those
- 8:34pliers. That's all I needed. Now what's
- 8:36in there? Do you have the candy I'm
- 8:37looking for? I think it does.
- 8:41Let's see.
- 8:43Let's pop all the sides off.
- 8:47Yep, there it goes.
- 8:50Is this what I'm looking for?
- 8:54Yes.
- 8:56Yes, I do believe it is. Okay, so yes, I
- 9:00am going to
- 9:03I'm drilling a hole.
- 9:07Good thing I had the boss right on the
- 9:08ground, baby.
- 9:10Y'all, this is this is chaotic.
- 9:13For people who are like proper engineers
- 9:15and whatever, don't judge me. No one
- 9:18likes any. It's unplugged. I can do what
- 9:20I want. Take that piece out. All right.
- 9:22Now, I'll show you. It's a little hot in
- 9:24here. Porto summer. What can I say? All
- 9:26right. So, here we go. This what we've
- 9:30done.
- 9:31Put a hole right there, which is right
- 9:33where that OPV is. So, I can just shove
- 9:35this right in. And boom. I'm in there to
- 9:37twisty turny. So, that's fun. Um, the
- 9:40thing is is after you do the OPV though,
- 9:43after you change it, you have to put
- 9:44this back on. So, it looks like you will
- 9:46need to take this part off, but at least
- 9:47getting to the screw is going to be much
- 9:50easier now. Um,
- 9:53kind of stinks though, that there. See,
- 9:55now if I did have a bigger area cut out,
- 9:57now I'm thinking if I had a bigger area
- 9:59cut out, I wouldn't have to take this
- 10:00apart at all. I could just take the
- 10:02water tank off, plop that out, screw,
- 10:04screw, screw, plop it back in. Now I'm
- 10:07I'm going to do it. Yeah, I'm going to
- 10:10do it.
- 10:12I'm going to do it.
- 10:14Take the big boy off. We'll take the
- 10:16little one and we'll just make little
- 10:20Yeah, I'm definitely going to edit a lot
- 10:21of this out before I post this video. A
- 10:23lot of this is like we'll just say next
- 10:26time you see the video or when I snap my
- 10:29fingers, the back panel will be chopped
- 10:31up. Well, I do with a serrated edge. I
- 10:32just don't know where it is.
- 10:34I have a few of them actually. Isn't
- 10:36there one in here?
- 10:39Could have sworn.
- 10:45Where is it?
- 10:48Where are you? And I'm so sorry. I
- 10:52cannot sleep. I cannot dream tonight.
- 10:57For future editing, Lance,
- 11:00we're back. All right. So, we've got
- 11:02everything off.
- 11:04Look at that. Look how Look how
- 11:06beautiful it is.
- 11:09It's gorgeous. But I can now get right
- 11:11on in. It's hard to There we go. I pull
- 11:13that little bad boy out. And then right
- 11:15inside there goes the pop goes the
- 11:18weasel. Now I'm going to need to pop
- 11:20this back out. I forgot to try this
- 11:22while the lid is off. Yep, there we go.
- 11:26Sweet. So now all you got to do pop this
- 11:29cutie off. And look at that. Look at
- 11:31that access right there. It's lovely.
- 11:34It's lovely. And honestly, I can we, you
- 11:36know,
- 11:39I still have this wrecked piece of
- 11:41plastic. I can make a little door if I
- 11:42wanted to. You know, that's what we do
- 11:44in the uh, you know, the in the
- 11:46renovation world like I'm in. We
- 11:49repurpose like little little Hello
- 11:51little door. That'd be really cute, I
- 11:52think. Um, it's probably going in the
- 11:55trash. Uh, but yeah. So, what we'll do
- 11:58now is I
- 12:00am deaf.
- 12:02Needing to clean a little bit more
- 12:03probably. I'm going to put it back
- 12:04together cuz yolo. We will
- 12:09shop. All right. Where's the port
- 12:10filter? Port filter's here.
- 12:15What basket am I going to use?
- 12:17I don't want to use one of their stock
- 12:19ones. Their stock ones are fine, though.
- 12:21Like, that's fine. Not bad.
- 12:23Um, but we'll use like uh we'll use this
- 12:28decent 18 gram basket. I think I used
- 12:30that in the video. Should probably warm
- 12:31this up. So,
- 12:33uh, actually a better way to heat it up.
- 12:35Whatever. We'll just heat it up like
- 12:36this. It's fine. It's not going to heat
- 12:38up that quickly. So, we'll just we get
- 12:41the rest of this out.
- 12:45Just take this cup, that cup. We'll call
- 12:48it a day. All right. We got our coffee
- 12:51right there. Let me just heat this up a
- 12:53little bit.
- 12:57That's probably good enough.
- 12:59Probably good enough. Take this out left
- 13:02over in there.
- 13:04All right.
- 13:07Good. Now, where is the lid to my
- 13:10shaker? I just had it. Did I drop it?
- 13:13What did I do?
- 13:16What' you do?
- 13:19Yeah. What we do is we improvise.
- 13:23There we go. Good enough. Got about uh
- 13:28half grand on my hand. It's okay.
- 13:31All right. Here we go.
- 13:38There's that. Oh, here's the tamper.
- 13:40Boom. Get on the table. Here we go. All
- 13:44right. Let's see how we're doing.
- 13:47All right. We got that on good. so y'all
- 13:50can see a little bit better.
- 13:53All right.
- 13:55And here we go. I have no idea where
- 13:58this pressure is going to be. I remember
- 13:59I turned it. I don't even remember which
- 14:01direction. I just know I turned it and I
- 14:02don't want to turn it again. So, what
- 14:03I'm going to do is I'm going to saturate
- 14:05the puck and I'm going to turn it off.
- 14:08Um, and I'll turn it back on. So, it's
- 14:10going to reset the clock up here. So,
- 14:11I'm gonna use the Kaya clock. But, yeah.
- 14:14Here we go.
- 14:16The pressure is going up. Once it gets
- 14:18to the red or when I see drops, I'll
- 14:20stop it. There we go. Okay. So, that's
- 14:24the bloom. There we go. You see those
- 14:25drops coming out? Yeah, baby. All right.
- 14:28So, we're blooming it. We're at 16
- 14:30seconds. I'll give it a 25 second.
- 14:35Oh, this is going to be nice. Nice
- 14:37bloom. It still has pressure in the puck
- 14:39when it gets to the white.
- 14:42So, at 30 seconds. There we go. Boom. We
- 14:44restart. Okay. So, I set the OPV a
- 14:47little higher than it was,
- 14:50but not much. No, I didn't. Yes, I did,
- 14:53cuz it peaked a little into the red. It
- 14:55doesn't usually It didn't do that at
- 14:56stock. Um, but anyway, all right. I'm
- 15:00going to stop this to let the pressure
- 15:01just kind of cascade right about now.
- 15:06Let it cascade a bit. Get a little few
- 15:08drops, and then I'm going to take it
- 15:09out. There we go. So, that was a 55
- 15:11second shot. 44 g output. Um, yeah,
- 15:15doing a blooming style shot. And the
- 15:17other thing I showed my video, but you
- 15:19can you can relieve uh some of the flow
- 15:20near the end with opening the steam
- 15:22wand. So, there's a lot of fun hacky
- 15:24things you can do with this machine. Um,
- 15:27and it pulls nice espresso. And
- 15:29honestly, if you keep it at like 92, the
- 15:31temperature is pretty good.
- 15:36That's nice.
- 15:39I'm pulling just like a modern style of
- 15:42a traditional blend. Um, so it's got
- 15:45like whiny acidity, some uh graham
- 15:47cracker, some chocolate. It's nice. But
- 15:50then another trick I show in the video,
- 15:51but we'll show again here is you see how
- 15:53the pressure gauge so shows some
- 15:54pressure. I don't believe there's
- 15:56pressure there. I think it's all gone.
- 15:57So what I'm going to do is I'm going to
- 15:59faux release the pressure by just barely
- 16:01opening the steam one. And watch the
- 16:02pressure gauge. Don't watch the steam.
- 16:04You ready?
- 16:06There's no pressure in there when it's
- 16:08in that wide area. It's not actually
- 16:09measuring pressure. There's some sort of
- 16:10valve system going on where it's not
- 16:12reading it till about five bar. But it's
- 16:14depressurized even with no solenoid cuz
- 16:17I made the puck uh resistance go down so
- 16:20low. But anyway, we're off camera. We're
- 16:22off camera. But we're we're rocking it.
- 16:24Anyway, that is uh I could go in and
- 16:26play with the the thing more, but I'm
- 16:28not going to. We're right now where I
- 16:30need to edit down a lot of this and I
- 16:31don't want to make my job harder than it
- 16:32is. Uh but anyway, thank you all for
- 16:35joining live. Thank you for those who
- 16:36are watching this after the video on my
- 16:38main YouTube. Uh please hit the like and
- 16:41subscribe on this video. If you enjoyed
- 16:42this uh this content, this isn't how it
- 16:44always is. In fact, this is the first
- 16:46time I've done something like this. If
- 16:47you enjoyed it, please let me know. Um
- 16:50bit more chaotic, a bit more raw, you
- 16:52know, but uh I enjoy it. It makes my
- 16:54life a little easier because I don't be
- 16:56so polished and I can do this without
- 16:57having to make Ugo drive across town to
- 16:59film me. Um
- 17:02um yeah, I think that's it. I think
- 17:05that's it. I'm going to enjoy this
- 17:06espresso because it is quite nice. Um
- 17:09yeah, I'll read a few more comments from
- 17:11chat and then uh we'll we'll we'll we'll
- 17:13calm it down. Um I haven't fully
- 17:15seasoned a CV2 with it. Oh, we're
- 17:16talking about burrs. I love it. 25
- 17:18degrees. I'm skeptical of the cold bur
- 17:19espresso. Yeah. So, this I showed in the
- 17:21main video. It doesn't actually go all
- 17:22the way down to 25. And if you have it
- 17:24finely ground enough, it will heat up
- 17:25because it's a thermal block. But
- 17:28something I show in the video is you can
- 17:29simo bloom with it. If you do a minute
- 17:31long bloom, you can start at 25 and in
- 17:33reality it's like 50 or 55. You can turn
- 17:35it off after you saturate the puck. You
- 17:37can quickly change the temperature up to
- 17:39your normal brew temp. Start the shot
- 17:40once it's at temperature.
- 17:43Fun stuff. So, it's a very hacky
- 17:44machine. I mean, in both sense of the
- 17:46term. Uh, but yeah, it's a lot of fun.
- 17:48So, thank you so much again. I hope that
- 17:51you brew something tasty today. And
- 17:54cheers. Now is the awkward time. I have
- 17:56to come up and click in stream. But I
- 17:58love you anyway. Bye-bye.
About this transcript
This page contains the full transcript of Inside the HiBrew H10 by Lance Hedrick Unfiltered, generated from the public captions YouTube serves with the video. The transcript has 3,382 words across 477 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.