I Tried UV Printing... And Became Totally Obsessed — Transcript
Full transcript
- 0:00This is the coolest machine you've never
- 0:03heard of. And I've been genuinely
- 0:05obsessed with it for the last few
- 0:07months.
- 0:08>> Because this one machine with just a
- 0:10couple add-ons made this shirt, this
- 0:13magnet, this binder, this artwork, even
- 0:16this trading card.
- 0:17>> And I know what you're thinking. Hippeo,
- 0:19what? There's no way it can do any of
- 0:20those things.
- 0:21>> Those weren't even the coolest things.
- 0:23Because it's capable of so much more.
- 0:27>> But like what is it though?
- 0:29>> Well, if you're a bit of a nerd, then
- 0:30you've probably heard of stuff like 3D
- 0:31printing, where a machine makes things
- 0:33layer by layer. And at first, I thought
- 0:36this would be similar. But this is the
- 0:38XTool Omni O1. And genuinely, I kind of
- 0:42just want to show you guys all of the
- 0:43cool things I've been making with it.
- 0:45Because I have a really big problem. And
- 0:48it's that everyone with one of these
- 0:50machines sucks.
- 0:52>> Like what in the AI slop is this?
- 0:55>> And no, I'm not just going to punch down
- 0:57at smaller creators. I'm also really mad
- 0:59at the XTool team and the XTool website.
- 1:02>> Because even though they sent me this
- 1:05$2,500 printer and all of these
- 1:07accessories and all of these
- 1:09accessories.
- 1:10>> And you guys need to tell me if you feel
- 1:12this way as well, but their whole entire
- 1:14website, every single idea ever put out
- 1:17for this machine is AI slop. Now, I so
- 1:21badly want to tell you more about my
- 1:23cute frog shirt or my Nola trading
- 1:25cards. And trust me, I will. But as I do
- 1:28that, you might see some B-roll with
- 1:30some terrible awful AI slop. Because
- 1:33it's really hard to film this machine
- 1:34and I kind of have to use some of the
- 1:36content from XTool to show you just how
- 1:38freaking cool this machine is. Do you
- 1:39see how I'm really mad because this
- 1:41thing is so cool, but then the company
- 1:43and their practices and the people that
- 1:45they work with are so lame? But just
- 1:46know, if you see a clip with AI slop in
- 1:49this video, I don't support it and I
- 1:51think it's cringe. And I I made this
- 1:55to prove it. But yeah, it's 2026.
- 1:57There's a ton of amazing artists out
- 1:58there that you can work with very
- 2:00easily, and yet XTool decided to work
- 2:02with a bunch of creators that are
- 2:04shilling garbage slop. But, they also
- 2:06decided to work with me. And as you will
- 2:08very clearly tell, they did not sponsor
- 2:11this video. And all of these thoughts
- 2:13are my own.
- 2:15Now, the main reason why this machine is
- 2:17so obscenely cool is these UV and DT
- 2:21inks. But then also, these dual print
- 2:25heads because this bad boy is a UV
- 2:27printer. It uses these print heads with
- 2:30thousands of little nozzles to eject
- 2:33resin, and then a super high-powered UV
- 2:35light to cure it instantly in place,
- 2:38allowing you to do stuff like this. Now,
- 2:40the possibilities with this are kind of
- 2:42insane. And that is what I really want
- 2:44to show you here because it is so easy
- 2:47to make so many amazingly cool things
- 2:50with this machine. Now, when you first
- 2:52get this machine, it's a little bit
- 2:53scary because it arrives in a huge box
- 2:55and it's a little bit daunting. And I
- 2:57also didn't really record any of it, so
- 2:59I'm going to use footage from William
- 3:00Osman unboxing it to show you actually
- 3:03how easy the setup was. Now, all of this
- 3:05gave me a plan. I wanted to be able to
- 3:07print some things for me, some things
- 3:09for other people as gifts, and some
- 3:11things that theoretically I could sell
- 3:14or maybe turn into a little bit of a
- 3:15business. And not the AI slop at a
- 3:17farmers market kind, which led me to a
- 3:20few questions. And you at home are
- 3:21probably wondering, what is the point of
- 3:24a machine like this? It's really
- 3:26expensive at $2,500
- 3:29for just the base machine. Who is this
- 3:32for? Well, XTool would tell you that
- 3:34this is for people that want to start
- 3:35their own businesses or maybe artists.
- 3:38But, for some reason they decided not to
- 3:39work with any real artist. And they
- 3:42claim that you can print on basically
- 3:45anything from rigid to fabric to bottles
- 3:49to cards. Guys, that's going to be
- 3:50spicy. Now, at this point I had millions
- 3:53of different ideas, but I had to get the
- 3:54machine set up first. [music] Now, XTool
- 3:56sent me literally everything for this
- 3:59machine. They typically make laser
- 4:01cutters and a bunch of other machines
- 4:03that are quite cool and I've heard
- 4:04decent things about. And I've worked
- 4:06with some machines like 3D printers
- 4:08before, but this is definitely out of my
- 4:10scope. I felt a little bit unprepared,
- 4:13I'm not going to lie. So, when I opened
- 4:14the box and I saw this huge freaking
- 4:17machine and the fact that there were
- 4:19still like 10 other boxes sitting there,
- 4:21I was worried. But, it was actually
- 4:23disgustingly easy to get this machine
- 4:25going because they have video tutorials
- 4:27with embedded buttons that as you click
- 4:30it, it guides you through the setup. And
- 4:32before I knew it, I was already doing my
- 4:34very first print. Now, the very first
- 4:36print that they have you do is
- 4:38unfortunately also an AI slot picture.
- 4:40So, instead of that, I decided to make
- 4:42this guy who you probably saw earlier in
- 4:45the intro. This guy is one of my
- 4:46favorite designs from an artist that I
- 4:48hired called Leg Dad. We worked on a
- 4:50bunch of merch together and then we
- 4:51never actually shipped the merch, so I
- 4:52just kind of had this design sitting
- 4:54around. And already you might notice,
- 4:56wait, Hippeau, it has a raised texture.
- 5:00And that's the first of many very cool
- 5:02things about this machine. Because while
- 5:04you might think, okay, it's a printer,
- 5:06printer prints on paper. No, no, no, no,
- 5:08no. It can print layers and texture, but
- 5:12also we all have to talk about the
- 5:13shirt, too. But, how was printing this?
- 5:16How was the initial software experience
- 5:18as well? Also shockingly simple. Except
- 5:22for the fact that like installing the
- 5:24ink required you to put all of these
- 5:26cartridges in and shake them up
- 5:28violently and then use syringes to suck
- 5:31the ink through the machine to prime it.
- 5:34That part of the setup was actually kind
- 5:35of really daunting and they recommended
- 5:37you wear gloves and masks because it's
- 5:39resin and resin is bad if you inhale it.
- 5:42But then, you just drag the image into
- 5:44the software and tweak a couple
- 5:46settings. I tweaked the texture setting
- 5:48and gave this guy just a slight raised
- 5:51texture and like that, I hit print and
- 5:54that was that. Actually, there wasn't
- 5:56any weird calibration struggles. There
- 5:58wasn't any like, oh my god, why is this
- 6:01thing not working? I just dropped the
- 6:03design in, I tweaked some settings with
- 6:06the texture, and I hit print, and I got
- 6:08this. Now, this magnet, ceramic magnet,
- 6:12was provided by xTool, but then they
- 6:14also sell a bunch of different blanks
- 6:16for crafts and things on their website,
- 6:19which is pretty helpful if you don't
- 6:20have access to that near you. And some
- 6:22materials do require you to prime them
- 6:25with a special primer wipe, which this
- 6:27one I also had to prime. But then I felt
- 6:30supercharged. I felt freaking stoked. I
- 6:33was like, I just took a design that I
- 6:35had, or paid an artist for, plopped it
- 6:37in, and I was already making things.
- 6:39That's freaking incredible. Already, the
- 6:41possibilities were kind of flooding my
- 6:42mind. Like, I could make magnets as
- 6:45gifts for people. I could do some really
- 6:47stupid posting with them. Now,
- 6:49immediately, I had to try more things.
- 6:51Now, xTool provided circular magnets as
- 6:53well in their little tester kit, and I
- 6:55thought, "You know what? I can make an
- 6:57art." Meet Globglogabgalab. I love
- 6:59Globglogabgalab a lot, and you should
- 7:01love Globglogabgalab, too. Now, I then
- 7:03took Globglogabgalab, and I decided to
- 7:04plop him on basically every facet of my
- 7:07life. I made Globglogabgalab magnet that
- 7:10says "You tried." I made Globglogabgalab
- 7:12magnet that I have to censor. And you're
- 7:14also probably like, "Wait, but you also
- 7:16have Globglogabgalab on your shirt."
- 7:17We'll get to that. That's actually
- 7:19skipping way ahead. Now, already, I'm so
- 7:21freaking stoked. I've got
- 7:22Globglogabgalab on magnets. I put those
- 7:23on my freaking fridge. But then,
- 7:25Halloween is coming up, and I need a
- 7:27costume for that. Now, my friend Zamir,
- 7:29who runs the EggDog YouTube channel,
- 7:31shout out EggDog, was throwing a very,
- 7:34very cool party idea where you had to
- 7:36dress up like a mid-2000s or early 2000s
- 7:39smartphone app. And guys, at that time,
- 7:41all I played was RuneScape, so I was a
- 7:43bit out of my comfort zone. But one of
- 7:45them that I had done is Plants vs.
- 7:47Zombies. My girlfriend Kate really
- 7:49wanted to be a zombie for some reason.
- 7:52Don't really know why, but I was like,
- 7:54"Wait, I like plants. I have a terrarium
- 7:56full of plants, a house full of plants.
- 7:58I could be a plant." So, then I had my
- 8:00second mission. I need to make a
- 8:01Halloween costume. Now, in order to do
- 8:03that, we need a simple base. Who am I
- 8:05going to be? Well, probably Pea Shooter,
- 8:08one of the most beast plants out of all
- 8:10of the Plants vs. Zombies guys. And the
- 8:13xTool Omni can print on clothes,
- 8:17theoretically. So, in order to do that,
- 8:19I'm going to have to learn how to print
- 8:20on clothes. Now, this was actually so
- 8:22much easier than I thought. Like, look
- 8:24at this.
- 8:26Now, one of the best friends of the
- 8:28xTool Omni is the Wonder Press. And you
- 8:32kind of need this thing if you buy the
- 8:34machine, which is a little bit of a
- 8:35bummer because this bad boy is freaking
- 8:37expensive. But, it's a combination heat
- 8:41press, craft oven, sublimation vacuum
- 8:44thing. But, unfortunately, the
- 8:45sublimation vacuum thing did not work
- 8:47very well for me. I tried it a couple
- 8:49different times. I really don't
- 8:51recommend you buy that attachment
- 8:52because I only had bad things. I tried
- 8:55to make gummies for a little fun event
- 8:58with friends, and
- 9:00the vacuum thing just didn't vacuum
- 9:03keycaps. I tried to make keycap-shaped
- 9:05gummies, and I was like, "Okay, maybe I
- 9:07can try it with a keyboard." That didn't
- 9:08work. But, the heat press feature, the
- 9:10craft oven feature, very cool on this
- 9:12thing. Probably a necessity if you buy
- 9:15the O1. Let me just show you how easy it
- 9:17is to make a shirt with this thing. Now,
- 9:19my girlfriend made this really cute
- 9:21design with a goose on it. We love
- 9:22goose. And I want to surprise her with a
- 9:24shirt to see what she thinks. So, all I
- 9:26have to do is turn on this heat press.
- 9:27And there's already a mode for the shirt
- 9:29that we want to do, so it instantly
- 9:30detects it, sets the temperature, and
- 9:31sets the pressure. Then, we swap in the
- 9:33shirt module into the xTool Omni. And of
- 9:35course, you need a shirt to print on.
- 9:37So, I just picked up some Comfort Colors
- 9:38blanks from Amazon because if you didn't
- 9:40know, this is what a lot of YouTubers
- 9:42use as their merch shirts, like the
- 9:43nicer quality ones, I'm air quoting
- 9:45there. Then, we stick it in the heat
- 9:47press, and we do a little quick pass on
- 9:48it. This is a cheat code for ironing out
- 9:50the wrinkles. And you're probably
- 9:51wondering, "Hippo, how did you figure
- 9:53out all of this?" Well, xTool's
- 9:54tutorials were actually pretty good.
- 9:56Now, because we're using DTG, aka direct
- 9:58to garment, I need to shake up this
- 9:59magical mixture that I made, and then I
- 10:00spray it on the shirt, and I'm going to
- 10:02cure it. This is what will make the ink
- 10:03fuse to the shirt. Now, this point, the
- 10:05whole entire process has taken about a
- 10:07couple minutes total. So, I'm going to
- 10:08go get my design ready. The machine auto
- 10:10detected that the garment tray was in
- 10:12and swapped the settings because we're
- 10:13going to be printing flipped. Then we
- 10:15just drag in the design, scan the print
- 10:16file, and then load up the shirt into
- 10:18the garment tray. Then we hit print and
- 10:20we're good to go. Oh, that's so cute.
- 10:25No, already I was freaking stoked
- 10:26because I just printed a shirt. That's
- 10:28insane. But, we're not done yet. We have
- 10:30to move the shirt over to the heat press
- 10:32and give it one last press. This sets in
- 10:35the ink permanently and cures it. But
- 10:36then, it was the best part of this
- 10:38machine, giving gifts to others. I hope
- 10:40Kate likes it.
- 10:41>> Kate, look at it.
- 10:43>> Aw, cute. Aw, that's super cute.
- 10:46That's adorable.
- 10:47>> Now, with that new found superpower, I
- 10:49could experiment even more. Now, that
- 10:52was all DTG, direct [music] to garment
- 10:55printing. But, this thing can also print
- 10:57direct to film and heat press on, which
- 11:00lets you do a little bit more
- 11:02complicated things. And that was going
- 11:05to be the key to my Halloween costume.
- 11:07>> But, then I got really hopelessly
- 11:09distracted.
- 11:10>> Can I get a glove glove shirt, please?
- 11:15Glove glove!
- 11:17Oh my god, he's beautiful. Wow.
- 11:20You're You're an artist. This is a
- 11:22masterpiece.
- 11:23>> Thank you. Thank you so much.
- 11:24>> Now, do a Nola one.
- 11:30So cute.
- 11:31>> Look at that. That was also too easy.
- 11:33This is maybe go I can do too many
- 11:34things now.
- 11:35>> So, you're going to your Halloween
- 11:36costume, right?
- 11:38>> Do you want to see the cards that I
- 11:39made?
- 11:39>> Is that a Halloween costume?
- 11:40>> Do you want to Do you want to I made
- 11:41cards.
- 11:44Now guys, I'm having too much fun. I'm
- 11:46having way too much fun. I should be
- 11:47working on the Halloween costume, but um
- 11:50I'm a little bit into Riftbound, if you
- 11:52guys didn't know, a little bit into card
- 11:54games. I have a couple boxes. I have a
- 11:57whole cabinet full. And one of the very
- 12:00cool things that I think you can do on
- 12:03this is print some proper trading cards.
- 12:06Surely that's going to be super easy,
- 12:07right? Then I'm just going to take some
- 12:09cardboard, put it in on the plate, press
- 12:11the button,
- 12:13and then out comes a card, right? Okay,
- 12:16um then I got really distracted and made
- 12:21this 3D Nola magnet.
- 12:24Um don't ask me why she's so menacing,
- 12:28just subscribe or she's going to get
- 12:31you. Okay, sorry the cards. Well,
- 12:33actually in some ways, yeah. It was as
- 12:35easy as put my card in the software, set
- 12:37a couple settings, put cardboard in, and
- 12:41get a card out. But, this isn't
- 12:43holographic at all. That's kind of lame.
- 12:45It's just a Nola card. How can I get
- 12:47these super cool effects and then these
- 12:49very cool little resin raised effects?
- 12:53This sent me spiraling for weeks. But,
- 12:56it would become one of the most
- 12:58satisfying journeys I would ever
- 13:00undertake for this channel. Now,
- 13:01unfortunately, I'm very easily
- 13:03distractible. And in my process of
- 13:05making cards, I was like, "What else can
- 13:07I make now that I have this thing
- 13:09around?" Because as I told people that I
- 13:11got a printer that can print basically
- 13:13anything on anything, they started to
- 13:15ask for things. Somebody wanted a Grub
- 13:18Grub iPhone case, so I printed a Grub
- 13:21Grub iPhone case. I mean, who wouldn't
- 13:23want a Grub Grub iPhone case? Uh leave a
- 13:25comment and I might give one of these
- 13:26away. And then many of you know about
- 13:28Vault X binders. Like, this is where you
- 13:31store a bunch of Pokémon cards and
- 13:33various things. But, a lot of people get
- 13:35them custom painted. Now, I asked one of
- 13:37my favorite artists, Cassio Corlov, go
- 13:39check them out, please, if I could use
- 13:41one of their artworks to try and print
- 13:43on my binder to give it a handmade look.
- 13:46And this one I thought would be super
- 13:47duper hard. It's like a leathery
- 13:49texture. Certainly, it's uneven. There's
- 13:51no way it could print well on this
- 13:53binder.
- 13:54Boom. This looks absolutely
- 13:57amazing. This is the Alolan Vulpix art.
- 14:00It printed perfectly over the Voltex
- 14:02logo. It looks hand painted. The details
- 14:05are impeccable. I feel super powered.
- 14:07And not once did I have to hit the
- 14:09generate image button. Now, here's the
- 14:12thing. If you're a small business owner,
- 14:14if you're slaying, if you're trying to
- 14:16make money, you have to pay people for
- 14:18things. You have to pay employees, you
- 14:20have to pay staff. And if you have a
- 14:22business of selling things at a farmers
- 14:24market or something, you're going to
- 14:25need to pay an artist for art that
- 14:27people actually want. Oh my god,
- 14:29especially if you're a YouTuber with
- 14:30like 100,000 subscribers like a lot of
- 14:32these guys are, absolutely no excuse to
- 14:35be using AI slop. It's just uncreative
- 14:37and lazy on a machine that can create so
- 14:40much. Now, you guys are probably also
- 14:41wondering if it can print on keyboards
- 14:43or not. But, I have to work on my
- 14:44Halloween costume. So, I got this asset
- 14:47of pea shooter off of the internet. And
- 14:49then in Photoshop, I took all of his
- 14:52little bits and I put them out in a row.
- 14:54Now, at this point, I've made a goose
- 14:56shirt, a Nola shirt with a little rock.
- 14:59Shout out Pika who made that one. And of
- 15:01course, a glob glob shirt. But, all of
- 15:03these are DTG. And for this idea, I'm
- 15:06going to have to print these out on film
- 15:08and heat press them onto a hoodie. So,
- 15:10of course, I practiced with glob glob on
- 15:13my ceramics bag. And this was actually
- 15:15one of the more scuffed designs that I
- 15:16did because on this bag, I tried to
- 15:18print DTG and the whole entire thing
- 15:20just smeared into this weird mess. It
- 15:23was horrible, bad experience. This is
- 15:25one of the first fabric things that it I
- 15:27don't think it can really do DTG on
- 15:29because it was just way too uneven. But,
- 15:31that's where DTF saves the day. This is
- 15:34a roll of sublimation film and this is a
- 15:36CNC router, future video. And I'm going
- 15:38to use this, print on it in here, and
- 15:41then heat press it to make my costume.
- 15:44Ooh, but I think my holographic paper
- 15:45arrived. What if I work on that? Also,
- 15:47at this point, I've only been showing
- 15:49this thing with this tiny little bed,
- 15:50but it can also print on this full size
- 15:53sticky bed. Now, this is Proxy Jack's
- 15:55proxy cardstock. If you've ever seen a
- 15:57holographic card before, you'll know
- 15:59that they usually have some kind of holo
- 16:02layer that cards are printed on. And
- 16:05these are called reverse holos, where
- 16:07there's a part that isn't holographic
- 16:09and then the background is holographic.
- 16:11Sometimes, it's foiled on top, but in
- 16:13general, you actually print the design
- 16:15onto the holographic paper to get the
- 16:18really cool holo design. Now, your
- 16:20standard printer can't really do this
- 16:22because standard printers can't print
- 16:24non-transparent white ink. You'll get
- 16:26designs like this Mewtwo or this
- 16:29Chikorita where the whole entire thing
- 16:31is holographic, but you can't have this
- 16:32really cool look like this Persian or
- 16:35the Snorlax. And if you're trying to get
- 16:37absolutely crazy with it like some of
- 16:39those professional cards, that's where
- 16:41this printer comes in. So, with this
- 16:43fancy holographic paper, I can print out
- 16:45the card directly on it and anything I
- 16:47want to be holographic, I don't add
- 16:49white ink. Sounds simple, right? Not so
- 16:52much actually. But over the last few
- 16:54weeks, I have been doing trial and
- 16:56error, trial and error, trial and so
- 16:58much error because a lot of these
- 17:00settings and specific things are things
- 17:02that most people don't really even tell
- 17:04you about. And then I learned the
- 17:05machine has a water bottle function.
- 17:08What? Well, for a couple hundred dollars
- 17:11more if you buy the rotary attachment,
- 17:14you can insert water bottles into them
- 17:16and then print around the whole entire
- 17:18surface of the bottle as it rotates it.
- 17:21All you have to do is prime the bottle,
- 17:23load it up in the software, and then it
- 17:26auto detects and tracks the bottle's
- 17:28diameter, and you can do some crazy
- 17:30stuff. Like I made a Glub Glub bottle.
- 17:33Of course I made a Glub Glub bottle. Who
- 17:35doesn't want Glub Glub on a bottle? Oh,
- 17:38NO.
- 17:40>> [laughter]
- 17:42>> OH, NO. It looks so bad.
- 17:48Now, at this point, the Halloween party
- 17:49was coming up really quick, so I had to
- 17:51get back to working on the Halloween
- 17:53costume. I set the printer to DTF mode
- 17:55and I printed out two sheets of these
- 17:58leaves. I cut all of them to size and
- 18:00then pretty jankily heat pressed on a
- 18:04bunch of leaves onto a green hoodie as
- 18:06well as eyes. Now, I'm not the most
- 18:09artistic person in the world, but I've
- 18:11got ideas. Now, it's a little bit lame,
- 18:15but just like that, my costume is done.
- 18:18Kate also made me like a little snoot,
- 18:20which I think really ties it together.
- 18:22But, we've got the eyes, we've got the
- 18:24leaves. I printed little pocket leaves.
- 18:27I think the leaves on this turned out
- 18:29super duper sick, and you can see that
- 18:30it's got kind of a different texture.
- 18:32Cuz the way that you make this, you
- 18:34actually heat press the film onto it,
- 18:37which kind of gives it that more
- 18:38vibrant, glossier look. Now, sure,
- 18:40Kate's zombie costume turned out better
- 18:42than mine, but that's because she's very
- 18:44talented, and I just jankily threw this
- 18:46together. But, the fact that you could
- 18:48just make cool like designer in air
- 18:51quotes clothes and just have decals
- 18:53wherever you want, that already is so
- 18:55sick. I also got some really amazing
- 18:57pixel art done by Eager Sprout, who does
- 19:00my pixel art desk mats, and I just
- 19:02printed this with like a 3D texture on a
- 19:06canvas and put it up on the wall. This
- 19:08is just full-blown artwork on my
- 19:10ArtSprout wall. Absolutely awesome. I
- 19:12also printed this one and plopped it in
- 19:14the closet. Looks stellar. Now, at this
- 19:17point, I just had a few more goals left.
- 19:19I needed to print my cards, and I also
- 19:22really wanted to print a keyboard. How
- 19:24do I print a keyboard? Well, first, can
- 19:26you even print on a keycap? Okay, well,
- 19:28let's see.
- 19:32Oh, yeah, you can totally just print on
- 19:34a keycap. Now, this is just another
- 19:35pixel art desk mat that I had that I
- 19:37decided to plop onto a keycap. And like
- 19:39this works, but I'm not super happy with
- 19:42it. I think the raised texture means
- 19:44that I can't go super far around the
- 19:45edges, and this would be nice for a
- 19:47one-off, but maybe not for a whole
- 19:49keyboard. What if I put a whole keyboard
- 19:51in there? Now, at this point, I have had
- 19:54my first real success with printing
- 19:57cards. I printed Nola with white ink,
- 19:59the background with just color ink, and
- 20:01you can see that I've got that reverse
- 20:03holo effect on her eyes, which is really
- 20:05super duper cool. I think the card
- 20:06printed okay, but I tried a varnish
- 20:08layer on it, and it kind of just ended
- 20:10up as droplets, which looks really ugly.
- 20:12Now, originally, that's because I tried
- 20:14a glossy varnish layer on top, and
- 20:17obviously, that didn't work. But, I was
- 20:19missing something really important about
- 20:21these normal Riftbound cards. They print
- 20:24them like a sandwich. They have a color
- 20:26layer, a white layer, and a UV varnish
- 20:29layer. Now, the UV varnish layer is how
- 20:31you get the really cool raised texture
- 20:33on cards, usually with like over
- 20:35numbered cards or the super rare
- 20:37collector cards. And you essentially
- 20:39have to make a design in like
- 20:41Illustrator with these really thin
- 20:43lines, and then you print that on top of
- 20:46the whole entire card as a matte varnish
- 20:49layer. Now, for the keyboard, that
- 20:52interesting. I decided to first test it
- 20:54on the Epomaker Hex 70, an ortholinear
- 20:57keyboard that was relatively flat, and I
- 21:01figured it would give me the best chance
- 21:03of being able just to print across a
- 21:05whole entire keyboard with maybe no
- 21:07issues. At this point, I kind of just
- 21:09wanted to test the limits of the
- 21:10machine. Like it was doing most things
- 21:12that I wanted to without really any
- 21:15hiccups whatsoever. So, I set it to
- 21:17print, and it was the moment of truth.
- 21:21Wait.
- 21:23>> [laughter]
- 21:26[gasps]
- 21:26>> No way. That's insane. What? At this
- 21:31point, I was also having so much success
- 21:33with the cards. I literally got an
- 21:36industrial card die cutter and this
- 21:40whole entire setup of different
- 21:42cardboards to try. Like with this thing,
- 21:44I could put a cardboard in, hit that,
- 21:46and then I've got card-shaped board.
- 21:48Yes, I had to order it from Alibaba.
- 21:51Yes, I'm proud of it. And after a while,
- 21:54I got this. This is the perfect first
- 21:58attempt. Not only is the edges super
- 22:01smooth and clean, you can see that
- 22:03fingerprint UV varnish layer. You can
- 22:05see the holographic coming through
- 22:07really nice. This looks like a
- 22:09professional card. I was so freaking
- 22:11excited, but I wasn't done yet. These
- 22:13aren't yet a full art. I wanted
- 22:15something like these. And with some more
- 22:18testing, tinkering, tweaking layers, I
- 22:21got this. What I would call a pretty
- 22:24darn perfect card. The Hollowing, the
- 22:27full art, I have selective foiling in
- 22:29the corners. All of these things were
- 22:31layers and choices that you had to make
- 22:33in the design file, and this was one of
- 22:35the most difficult things I made. It
- 22:37wasn't without its shortfalls because
- 22:39sometimes you just mess up and the white
- 22:40layer shows through and things didn't
- 22:43make me happy, but then I made a fat
- 22:45stack of them and started giving them
- 22:47out to people at competitions. And if
- 22:49you ever bump into me while playing
- 22:51Riftbound, just say howdy-hey and I will
- 22:53give you a Nola. And something really
- 22:55cool happened out of this because Kate
- 22:57was playing too and I gave her some
- 22:58Nolas to give away and she bumped into a
- 23:00Rioteur, which is like the people that
- 23:02make the game, and um they gave her a
- 23:05Riot buff in exchange for the Nola,
- 23:07which is so freaking sweet and
- 23:09wholesome. If you know anything about
- 23:10Riftbound, this is really cool. So
- 23:11already, this little silly journey of
- 23:14learning a new printer turned into a
- 23:16very fun hobby of making custom trading
- 23:19cards. These guys were the most fun I've
- 23:22had working on a video in a long time.
- 23:24But oh my god, the keyboard turned out
- 23:28so cool. It kind of did this like
- 23:31spray-painty pattern across the whole
- 23:33entire thing and it didn't really print
- 23:35fully cleanly, but this pixel art desk
- 23:38mat design from a distance, this is
- 23:40probably better than anything High
- 23:41Ground has done. But I feel like if we
- 23:43got a keyboard flatter, we could do
- 23:45better cuz already this is a fully super
- 23:47cool way to just print a custom keycap
- 23:50design. So then, I decided to try
- 23:53something different. I have these flat
- 23:54Noofy keyboards that came from a project
- 23:57that I'm actually working on. In
- 23:58December, I was pre-filming because I'm
- 24:01going to Japan. In fact, I'll be in
- 24:03Japan pretty soon, but I wanted to see
- 24:05if it's a totally flat keyboard with
- 24:07super flat keycaps, low profile even,
- 24:10can you print on it easier? So I put it
- 24:13in, I let it run, and holy freaking cow.
- 24:18Now this was the same pixel art that I
- 24:20had on my wall, but I put it on the
- 24:22keyboard and it turned out really,
- 24:25really amazing. Like this also feels
- 24:27super nice to type on and in general I
- 24:30was kind of blown away and it's not like
- 24:32these images look bad at all. This is
- 24:34like a regular all over print that you
- 24:37would get with dye sublimation except
- 24:39it's just right on the keycaps. Now it's
- 24:42still not fully perfect. The edges are
- 24:44still slightly airbrushy but most people
- 24:47would really like this thing. So with
- 24:49the same machine and a couple different
- 24:51attachments I was able to make a million
- 24:53different things, find a new hobby and
- 24:56have a great time at Halloween. But what
- 24:58do you guys think of this? Is this worth
- 25:00$2,500? Will you check it out with the
- 25:02link down in the description or is it
- 25:05just a little bit silly and you
- 25:06shouldn't even support them because of
- 25:07the AI slop thing? I don't know. I'm a
- 25:09bit on the fence because it's one of the
- 25:11coolest machines I've ever used. Like
- 25:13this thing has been so much fun. Like
- 25:15subscribing. You should subscribe.
About this transcript
This page contains the full transcript of I Tried UV Printing... And Became Totally Obsessed by Hipyo Tech, generated from the public captions YouTube serves with the video. The transcript has 4,921 words across 694 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.