I Tested Every New Hario Dripper. Here's What I Learned. — Transcript
Full transcript
- 0:00This video is brought to you by
- 0:02Squarespace.
- 0:04This is a brewer that you all definitely
- 0:06recognize.
- 0:07>> [music]
- 0:07>> It is the Hario V60, one of the most
- 0:09beloved drippers in all of coffee. It is
- 0:12the very thing which pushes a lot of us
- 0:14into the deep rabbit hole of making
- 0:16coffee at home.
- 0:18More recently, however, there were three
- 0:20new drippers that have been dropped over
- 0:22the past year and a half or so, and that
- 0:24is what I want to go over in today's
- 0:26video.
- 0:27This dripper, the Wren, was developed in
- 0:30collaboration with Yasuo Suzuki, who
- 0:32created the Origami dripper of Trunk
- 0:34Coffee. So, Hario Shanghai collaborated
- 0:38with, essentially, Trunk Coffee or the
- 0:40Origami guy, in order to make this
- 0:43product.
- 0:45The next one is the Hario Alpha. Neither
- 0:47was this one created by Hario Japan.
- 0:50This one was developed by Hario Taiwan.
- 0:53Then finally, we have the Hario Neo.
- 0:57This one was developed in Japan, and it
- 1:00is, I guess you could say, part of their
- 1:01legacy group, because it was designed by
- 1:04that team there. That being said, they
- 1:06all are still Hario.
- 1:08We'll be taking a look at these three
- 1:09drippers. We're going to do some testing
- 1:11with them, some tasting with them, and
- 1:12I'll talk about what I perceive as
- 1:15>> [music]
- 1:15>> what they kind of offer in the cup
- 1:17outside of something like a standard
- 1:18V60. The Alpha.
- 1:21>> [snorts]
- 1:21>> So, first off is the Hario Alpha. Now,
- 1:23there's not a ton of information online
- 1:26as to why the Hario Alpha was designed
- 1:28this way. We can infer some things based
- 1:30off of the design, which is what we're
- 1:32going to do. So, the first thing to note
- 1:33is how very much different it is from
- 1:36the plastic V60. So, if we take a look
- 1:38at the inside, obviously, the geometry
- 1:40is different. There's, you know, a
- 1:41double kind of sword-looking, like the
- 1:43old school kind of sword-looking designs
- 1:45at the bottom, where two kind of
- 1:47converge into one near the top. So, you
- 1:49have more flutes near the bottom, less
- 1:50flutes near the top. Whereas here, it's
- 1:52kind of flopped. You have more ribs at
- 1:54the top, less ribs near the bottom. The
- 1:57other thing to note is you have flutes
- 1:59or channels in the Alpha, whereas you
- 2:00have ribs in the V60. So, that's a huge
- 2:03difference. A rib is going to keep the
- 2:06paper off of the wall. So, where it
- 2:08touches the rib and the wall, there will
- 2:10be an air gap between them, and they can
- 2:12be inconsistent because of that. Now,
- 2:14this does help with air flow. It helps
- 2:16promote some sort of bypass, which gives
- 2:18you a really unique cup with high
- 2:19clarity in a V60. There's nothing wrong
- 2:21with that, but that's what it is doing.
- 2:23So, it can give you much more
- 2:24inconsistent cups, which I do believe is
- 2:26why so many people find maybe flat
- 2:28bottom brewers a bit more consistent
- 2:30than something like the V60. Even if you
- 2:33were to maximize the thermal equilibrium
- 2:35of each of a ceramic, a glass, a metal,
- 2:38and a and a plastic V60, the designs are
- 2:40also slightly different, which we'll do
- 2:42a quick looksy at right now.
- 2:44As you can see, the metal V60 is
- 2:46entirely different than the than the
- 2:48plastic one. We have much wider slots,
- 2:51as well as much longer top ribs. So,
- 2:54you're going to have much more
- 2:55separation near the top than you do in
- 2:56the plastic V60, and also more
- 2:58separation in general. Because these are
- 3:00big humps, you're not going to have much
- 3:02contact with the wall at all. Whereas
- 3:03with the plastic V60, if you blast water
- 3:06in there, you can actually get it stuck
- 3:07against the walls pretty decently. We go
- 3:10over to
- 3:11the ceramic V60, and we see that the the
- 3:13the fins are a bit more narrow in here,
- 3:16a little bit similar, kind of in between
- 3:18the plastic and the metal. And we have
- 3:20similar length top fins as we do in the
- 3:22plastic. It's not quite as long as in
- 3:24the metal one. Then if we take a look
- 3:26where we have it to the glass V60, it is
- 3:29very similar to the the ribs of the
- 3:31ceramic one. It's maybe the top one's a
- 3:34little bit longer, but the thickness and
- 3:36the slope of it are very similar. Then,
- 3:38of course, the last thing to take a look
- 3:39at is the bottom, the exit. So, the
- 3:41exits are quite different, as well. We
- 3:43have very deep tips on the glass one,
- 3:46whereas they're much more shallow,
- 3:48comparatively speaking, on ceramic,
- 3:51and even more shallow and wide on the
- 3:54metal.
- 3:55But, they all have 12 fins. And then at
- 3:58the top you have an extra 12. So, you
- 3:59have 24 rims around the top where there
- 4:02is going to be a lot higher promotion of
- 4:05bypass. And then near the bottom you'll
- 4:07have a lot less fins with less promotion
- 4:09of bypass.
- 4:11When we look at the Alpha, however, we
- 4:13have
- 4:141 2 3 4 5 6 7 8 9 10 11 12 flutes just
- 4:20like the V60, 60° angle, but as it goes
- 4:22down, we get those other six flutes.
- 4:26Now, there is kind of a connection here,
- 4:28and this is to allow for an easier
- 4:31pathway of escape for the air, for the
- 4:33gases, for the water, whatever it might
- 4:35be. So, if this were just a little rib
- 4:37down here that wasn't connected to the
- 4:39main flute, then it would come up and it
- 4:41would kind of get stuck. We need to have
- 4:43an easy release for the pressure that's
- 4:45building up on the inside, and so I
- 4:47believe that's why they have this little
- 4:49groove that connects the two flutes
- 4:51together. So, again, down below we have
- 4:5324, up top we have the 12. So, it's kind
- 4:57of the opposite design of a V60.
- 4:59Everything is inverted. And because of
- 5:01this, you need to have a connection
- 5:03because some of this is to allow air to
- 5:04escape so you don't cause any type of
- 5:06seal. But in addition to that, there's
- 5:08different ideas about pressure release,
- 5:10expansion of the filter, and of the
- 5:11coffee, etc., etc. That seems pretty
- 5:13unique. There are precedents to this.
- 5:16Now, most recently, of course, we have
- 5:17something like the UFO, which is an 80°
- 5:19dripper versus a 60°. The idea with this
- 5:22though goes even before UFO by a few
- 5:23years. You have people like the
- 5:25Dragonfly Design Company, which made the
- 5:27CT62, and they released it in 2022,
- 5:30meaning they were mocking up designs for
- 5:32at least a year or two prior to that. In
- 5:34addition to that, Timemore had the B75
- 5:36was released in 2022 as well. And
- 5:39knowing Timemore, they probably spent a
- 5:40few years iterating that in addition to
- 5:42that of Dragonfly. So, this is a
- 5:44precedent that is not out of nowhere.
- 5:48The primary point of contact is the
- 5:49wall, and then there is a lacuna or a
- 5:52gap behind where those flutes are, so
- 5:54you have consistency across your pores.
- 5:56With the ribs, your primary point of
- 5:59contact is the rib, so you'll have
- 6:01inconsistent placement on the actual
- 6:03filter wall or the brewer wall every
- 6:05time you come in to brew. So, it's a lot
- 6:08less consistent, at least in theory,
- 6:09whenever you're placing the filter, and
- 6:11the dynamics of the points of contact
- 6:14between the filter paper and the brewer
- 6:15itself are of paramount importance
- 6:18whenever you're trying to brew
- 6:19consistent brews. You have more
- 6:21predictable bypass, which is something
- 6:23that is very much difficult to predict,
- 6:25and you'll just have overall a much more
- 6:26predictable approach. Now, one final
- 6:28thing to mention is while it does go to
- 6:3024, it's only for a small section. They
- 6:34converge back once more for 12 escape
- 6:36shoots. Now, the way that this is
- 6:38designed does help to decrease stalling,
- 6:41and it speeds up the flow just a bit,
- 6:43which we'll see here in a second. But
- 6:44anyway, that is the Alpha. Next up, we
- 6:47have the Hario Ran. So, again, this one
- 6:49was in collaboration with Shanghai and
- 6:51with Trunk Coffee. Again, the innovator
- 6:54or the inventor of the Origami Brewer,
- 6:56which so many of you love. So, this one
- 6:58has a similar idea with the internal
- 6:59shoots, but I do want to read a post
- 7:01that was made by the inventor because I
- 7:04think it does a nice pretty job of
- 7:06explaining what the point of this brewer
- 7:08is. Hario Shanghai and Yasuo Suzuki, the
- 7:11beloved Hario V60 leaping into the
- 7:13future, trusted by baristas around the
- 7:15world, the Hario V60 now takes the stage
- 7:17in Shanghai, inheriting tradition while
- 7:19boldly pioneering the next generation of
- 7:21coffee brewing. The newly born Hario
- 7:23Concave Dripper Ran Series is a
- 7:24collaboration led by Hario Shanghai,
- 7:27developed under the inspiration of the
- 7:28Eastern philosophy of Yin and Yang
- 7:31equals world. Guiding this project was
- 7:33the supervision of Yasuo Suzuki, a deep
- 7:36a master deeply versed in coffee
- 7:37philosophy and extraction culture. After
- 7:40more than a year and a half of
- 7:41experimentation and prototyping, the
- 7:43series finally reached completion. The
- 7:45greatest appeal lies in its precisely
- 7:47engineered concave angles and two
- 7:48distinct material options. Of course,
- 7:50here we have the Triton, lightweight,
- 7:52highly durable, and perfectly suited to
- 7:53modern lifestyles. Its transparency
- 7:55highlights the brewing process, making
- 7:56it ideal for everyday use. This model
- 7:58achieves a revolutionary form that
- 8:00pursues ultimate stability and
- 8:01efficiency in extraction. It allows
- 8:03complete control of water flow, enabling
- 8:05anyone to brew a perfect cup. This is
- 8:06more than just a dripper, it is a symbol
- 8:08of new coffee culture. And blah blah
- 8:10blah blah blah blah. Okay. Um which I
- 8:11think is really nice. But also, I love
- 8:13this. 12 converging streams, six orchid
- 8:16petals, Eastern philosophy captured in a
- 8:19corner of the V60. Water flows gather
- 8:22like a life's practice. A white orchid
- 8:24blooms in every coffee moment. So, that
- 8:27is the idea here is you have these 12
- 8:29rims, you have these little tulip
- 8:31petals, and the idea is that similar to
- 8:33the Alpha, you have water flowing
- 8:35through without being stalled up. The it
- 8:37The difference is The big difference is
- 8:39you don't have the increased kind of
- 8:41bypass potential in speed that's going
- 8:43through this middle section or I guess
- 8:45low section on the Alpha. So, very
- 8:47similar, slightly more narrow channels
- 8:50than on the Alpha, all right? And then
- 8:52that you don't have that increased to 24
- 8:54and decrease back down to 12. The ones
- 8:56in the Alpha have an intense angle that
- 8:59cut in and then a 90° angle that cut
- 9:02out. Whereas this one has kind of 45°
- 9:05angles on both sides that cut in and cut
- 9:07out. So, the flute shapes themselves are
- 9:09quite different. The idea is to give you
- 9:11a complete control over the extraction.
- 9:13The idea is to give you more even
- 9:15extraction. The idea is to help you
- 9:16bolster extraction and to give you more
- 9:18consistent brews than your normal V60.
- 9:25Oh, hey, this is Lance from the future.
- 9:26We're at the end of the video. I know
- 9:27it's a long one. Please use the time
- 9:28cues down below. It'll help you a lot to
- 9:30get through it. But, I just want to say
- 9:33I'm stoked you're watching this video
- 9:34and there's some really fun things
- 9:35coming up. But, I do want to note that,
- 9:37you know, we have essentially four
- 9:38drippers here. So, it's really important
- 9:40to like pay super attention cuz with
- 9:41four drippers with the reference being
- 9:43the V60, four when you when you put them
- 9:46all like this, they create a square
- 9:47square space, which is the sponsor of
- 9:49today's video. Squarespace is an
- 9:50incredible online resource that will
- 9:52allow you with your cool entrepreneurial
- 9:54spirit to put what you're doing or what
- 9:56you find cool out into the world to
- 9:57those around you.
- 9:59Through Squarespace, you can not only
- 10:01get your domain, you can not only design
- 10:03your website, but you can also build a
- 10:04shop and you can build a community there
- 10:06where you're going back and forth with
- 10:07people who are interested in the things
- 10:08that you are doing. Now, I've been using
- 10:10Squarespace for many years and I think
- 10:11it's something that you might really
- 10:12enjoy. It's very easy, it's very
- 10:14seamless. You can take any of the cool
- 10:16aesthetic templates and you just got to
- 10:17drag drop photos on there. You can click
- 10:18the fonts. They've done all the cool
- 10:20design work for you. You just have to
- 10:21choose what vibes with your own
- 10:23branding. In addition to that, you can
- 10:25set the whole shop there. So, you can do
- 10:27all in one place and it's very very
- 10:28simple that even a caveman can do it
- 10:30like those old commercials.
- 10:32If you're interested in this, you can
- 10:33get 10% off your first domain purchase
- 10:35or your first website purchase by using
- 10:37the code down below, which is
- 10:38www.squarespace.com/lancehedrick.
- 10:40Click that link, helps channel, helps
- 10:42me, helps you. Go try a free trial and
- 10:44get your first domain rolling today.
- 10:46Now, let's continue on with video. Now,
- 10:49the last one we're taking a look at is
- 10:50the Hario Neo. Now, this one has 72 ribs
- 10:53that converge into one. These are more
- 10:54like ridges really than ribs, but this
- 10:57one is really interesting and comes
- 10:58again from Hario Japan. So, there is
- 11:00something to kind of take a look at.
- 11:02Obviously, coming from the headquarters,
- 11:04the
- 11:04the birthplace of the V60, this is the
- 11:07one that they're kind of fashioning as
- 11:08the next evolution. They talk about how
- 11:10it's evolved the V60 philosophy has
- 11:12evolved for modern extraction. And so,
- 11:15it inherits the V60 brewing philosophy
- 11:17while adapting it to modern preferences
- 11:19for fast and uniform extractions. They
- 11:22say that the 72 fine ribs that converge
- 11:24into nine ribs near the outlet are a
- 11:27unique rib geometry that creates stable
- 11:29flow paths, reduces clogging, and
- 11:31enables faster, more even extraction.
- 11:34Their starting point for creating the
- 11:36Stripper was faster and cleaner, so they
- 11:38wanted you to be able to grind a bit
- 11:40more finely without sacrificing brew
- 11:42time. They wanted more consistent brews
- 11:44without ever having a chance of
- 11:45clogging, and they wanted you to be able
- 11:47to extend your ratios, which this
- 11:49definitely allows you to do. Now, of
- 11:51course, you could get a filter that will
- 11:54more naturally increase the speed of
- 11:56your brew, meaning all things equal, the
- 11:59pour speed, the grind size, everything,
- 12:01you will get a faster brew simply
- 12:02because the paper allows it. When it
- 12:04comes to brewers, what they are doing is
- 12:06having a different connection to the
- 12:08paper filter and the bed of coffee as it
- 12:10expands and are allowing certain
- 12:12dynamics of the water, the flow
- 12:14mechanics through that bed. The Neo and
- 12:17the way that the walls are designed
- 12:18allow for a heightened amount of bypass
- 12:21from top to bottom. So, with all of
- 12:23these ribs, all of these contact points,
- 12:25you're having water capable of getting
- 12:27through and going past it, allowing it
- 12:29to be faster without stalling. So, this
- 12:31allows much finer grind sizes without
- 12:33sacrificing a quick brew.
- 12:36Of course, bypass can sound bad. I used
- 12:38to make it sound bad some 5 years ago,
- 12:39but it's not a bad thing and you can do
- 12:41fantastic things with a little bit of
- 12:43bypass, if not a lot of bypass, as long
- 12:45as it's controlled.
- 12:47Setting the filter paper is so important
- 12:50if you want consistency. I understand
- 12:52there are people out there who preach
- 12:53you don't need to wet your paper filter,
- 12:54you don't taste the paper. That's not
- 12:55what I'm even arguing. I'm saying you'll
- 12:58have more consistent results whenever
- 13:00you set your paper filter by wetting it.
- 13:02So, for example, you can take something
- 13:04like a pitcher or you can use your sink,
- 13:06but for camera purposes, we'll use a
- 13:08pitcher. We're going to dump quickly.
- 13:10And as you'll see, it can build up and
- 13:12then
- 13:14it sit fits flat against those walls.
- 13:19Now we have the filter wetted, we can
- 13:20kind of see all these different designs
- 13:22that are going on inside, which is
- 13:23really cool to look at, honestly. It's
- 13:25very cool. Uh it and it kind of tells
- 13:27you where your bed height should not
- 13:28really exceed. So, you want to keep it
- 13:30below these kind of sword these old
- 13:32school looking swords down here and uh
- 13:34then you're you're good to go.
- 13:42Now as water is in there, it's really
- 13:43pushing the papers against the walls
- 13:44helping it get really flat. But as you
- 13:46can see the the flutes here nowhere near
- 13:48as wide as in that often. You can also
- 13:51see if you look really closely you can
- 13:52see kind of like bubbles forming near
- 13:54the bottom at the escape and that's
- 13:56because it's having a little turbulence
- 13:58where it is the the ribs are ending and
- 14:01the filter no longer has any contact
- 14:03with the walls for the most part. So,
- 14:04down there you'll see a little bit of a
- 14:06slow down because there is no there's no
- 14:08contact. So, there's no real possibility
- 14:10for the water to escape the filter and
- 14:12bypass. So, it can kind of slow down
- 14:13near the end just like that.
- 14:18Now, lastly we'll do the Neo.
- 14:24So, you get your filter set and we just
- 14:28dump a full thing of water on.
- 14:33The idea of this many contact points is
- 14:35really going to speed up your brew. If
- 14:36you if you double that, you'd have even
- 14:38faster brews. Well, you may get to a
- 14:39point where it's essentially a solid
- 14:41wall, but in theory that's what would be
- 14:42going on. The more contact points, the
- 14:44more kind of chopped up wall you have
- 14:46against the filter, the more you're
- 14:48going to have a quick speed a quick
- 14:50drawdown. What's really interesting is
- 14:52here you can kind of see actually after
- 14:54those 72 ribs, you see the nine ridges
- 14:57down at the bottom where it is making
- 14:58contact with those walls. So, you have
- 15:01contact all the way through 72 down to
- 15:04nine allowing that quick process.
- 15:06Whenever it just no longer touches
- 15:07anything on the sides near the bottom is
- 15:09where you're going to have a bottleneck.
- 15:11So, on the Rane as you see, the flutes
- 15:12continue on and take up the bulk of what
- 15:15is down below. The sides of the wall are
- 15:17what kind of go away. And then we do
- 15:19have little bitty ribs kind of at the
- 15:21very end which allow for a pushing off
- 15:23of the paper filter. And then with the
- 15:25Alpha again, as you see, you see all of
- 15:27those ribs near the bottom, which is
- 15:28going to allow for that faster drawdown.
- 15:57Typically on drains, the fastest is the
- 16:00Neo, and in this case, it was still the
- 16:02fastest. Now, of course, this isn't the
- 16:04only test I've done because you could
- 16:06say, "Oh, the pour speed, blah blah blah
- 16:07blah blah." I understand that. This is
- 16:08based off of lots of testing and doing
- 16:10more controlled testing with things like
- 16:12drip assist in order to measure this.
- 16:14The Neo is consistently the fastest,
- 16:16just depends on the amount of how fast
- 16:18it is depends on how you're brewing, of
- 16:20course. But with this in my typical
- 16:22style of brew, I'm normally getting
- 16:23about 8 to 12 seconds faster across the
- 16:26board with the Neo. So, this one brewed
- 16:29in about 1 minute and 40 seconds. Both
- 16:31the Ran and the Alpha brewed in about
- 16:331:47. So, they're about the same speed
- 16:36in this setup. Typically, they can go
- 16:38either way, though. Sometimes the Ran
- 16:40can brew maybe a little faster, but I
- 16:42would say most of the time the Alpha is
- 16:43just a wee bit faster than the Ran. Both
- 16:46are slower than the Neo, but all three
- 16:48have been faster for me than a V60 with
- 16:50the way I set the filter. Now, if you
- 16:52were to set the filter by just using
- 16:54your kettle and allowing a lot more gaps
- 16:56that are a lot more erratic, then
- 16:58potentially you can have a faster V60,
- 17:00but whenever I'm doing it to be as
- 17:02consistent as possible and I use maybe a
- 17:04sink to blast the filter into a V60 and
- 17:06set it in a similar way that I set the
- 17:08filters in these three, you have a
- 17:10slower brew than the three of these. So,
- 17:13just to repeat that cuz that can be a a
- 17:15confusing. Whenever you're putting a
- 17:16filter in and you just use a kettle, so
- 17:19you're not putting a lot of water in at
- 17:20once to allow the weight of the water to
- 17:22settle the filter, you're going to have
- 17:24a faster brew because it's going to have
- 17:26a lot more air gaps and a lot less kind
- 17:28of contact throughout. So, you're able
- 17:30to get a faster brew with that. So, if I
- 17:32were to just toss a filter in, not even
- 17:34wet it, we'll likely even see faster
- 17:36times than what we're seeing currently.
- 17:38When we put a lot of water in and allow
- 17:40that weight to settle the filter against
- 17:42the walls as flush as possible, it helps
- 17:45us improve extraction efficiency, but
- 17:47even more importantly, because what does
- 17:48that even mean, it allows us to have
- 17:50more consistency so that we know where
- 17:53the air gaps are in each one. They're
- 17:54very specific, especially in these two,
- 17:57and it's pretty consistent in this due
- 17:58to the fact that there are so many ribs.
- 18:00There's only a certain amount of places
- 18:01it can really touch. It stays pretty
- 18:03consistent. You can see how the Neo is
- 18:05most efficient at catching fines up near
- 18:07the top, and that is because of all
- 18:09those contact places. I've found that
- 18:11when you have more of that contact,
- 18:12you're able to get more of those fines
- 18:14to kind of stick. With these, because
- 18:16higher up you have less flutes, 12, the
- 18:18same on both of these, you tend to have
- 18:20a bit less fines kind of accumulation.
- 18:23Now, you can tell, however, in the
- 18:25Alpha, when it doubles the amount of
- 18:27fins, you can see that more fines are
- 18:30collected in that area. So, our bed
- 18:32depth is to here, but those doubled fins
- 18:34come up a little bit higher, and that's
- 18:36where we start seeing an accumulation of
- 18:37fines against the filter. The Ran,
- 18:40however, just has the single all the way
- 18:41down, so you don't really see it nearly
- 18:43as effectively as you do in the other
- 18:45but most importantly in the Neo because
- 18:47we have multiple fins all the way up or
- 18:49multiple ribs.
- 18:54Now, obviously, with the different
- 18:56drawdowns, with the different dynamics
- 18:57in play, with the different geometries,
- 19:00they're going to be behaving
- 19:01differently, and you want to dial in
- 19:02slightly differently for each one, which
- 19:04we'll talk about as we're going through
- 19:06each taste. So, let's go ahead, pour
- 19:08them up, and I'll talk about taste as
- 19:09I'm I'm
- 19:10but just remember, the reason it's not
- 19:13blind is not because I don't do blind
- 19:15testing. All that's done off camera with
- 19:17different approaches. Whether I'm doing
- 19:19all of them with same extraction, all of
- 19:20them with same TDS, all of them with
- 19:22same particle peak, all of them dialed
- 19:24in to where they taste the best. There's
- 19:26different ways of doing that approach.
- 19:27Can't do them all on camera cuz that
- 19:28would be really boring. So, we do that
- 19:30off camera and then we only show
- 19:32refinement on camera.
- 19:35Okay, so with the Alpha, what I tend to
- 19:37get here
- 19:40is the one with the most kind of
- 19:41articulation of acidity as well as the
- 19:43most clarity. So,
- 19:45the Alpha typically against the V60 as
- 19:47well as these two newer designs, this
- 19:50one gives me kind of the the for me the
- 19:52best cup. It has a nice effervescence
- 19:54about it. It gives you a really nice
- 19:55complex kind of presentation of
- 19:57florality and it really gives you a nice
- 19:59articulated acidity that I quite enjoy.
- 20:02The Ran, as I sit through it,
- 20:04>> [snorts]
- 20:06>> tends to be just a bit sweeter. It seems
- 20:08that the extraction might be a bit more
- 20:09even on this one. This one allows
- 20:11consistently a more bolstered kind of
- 20:13sweetness about it. So, it is not as
- 20:15high in the highs as the Alpha is,
- 20:18meaning those top points of your coffee
- 20:20though that the acidity that you may be
- 20:22looking for, the structure within the
- 20:23acidity, the the panoramic kind of
- 20:25display of florals, you're not getting
- 20:27it as much in the the Ran. It tends to
- 20:30kind of just boil that down to kind of a
- 20:31more sweet kind of ripe fruit
- 20:33presentation for you. So, it's a bit
- 20:35more akin to what people describe I
- 20:37guess flat bottom brewers as being. That
- 20:40being said, I still think it is a nicer
- 20:42presentation of the coffee as far as
- 20:44that acidity presentation than something
- 20:46like a flat flat what a lot of flat
- 20:48bottom brewers tend to give you with the
- 20:50typical approaches. Of course, you can
- 20:51do different things with something like
- 20:53the Orea V1, but when we're talking
- 20:54about typical approaches to flat bottom
- 20:57brewers, this gives you, relative to
- 21:00these, a more flat bottom style of
- 21:02approach.
- 21:03Now, the Neo is interesting.
- 21:05>> [snorts]
- 21:06>> To be honest, it's probably my least
- 21:08favorite of the three.
- 21:10And I think the reason for that is
- 21:12because it allows for so much of that
- 21:13kind of bypass approach to the brew that
- 21:16you get a more rounded cup, but that's
- 21:19not necessarily
- 21:21but it doesn't necessarily bring along
- 21:23with it some of those more special
- 21:24attributes that your coffee could be
- 21:26giving. So,
- 21:28with this it does kind of want you to
- 21:29grind maybe a little bit finer or to
- 21:30pour a little bit more aggressively in
- 21:32order to slow the drawdown or you can
- 21:34just let it fly through really quickly.
- 21:37But when you let it fly through really
- 21:38quickly, it actually is less effective
- 21:39at extraction. Across the board
- 21:41typically the most effective are these
- 21:43two, the Wren and the Alpha, whereas the
- 21:45Neo tends to suffer a bit from that
- 21:47extraction due to the heightened bypass.
- 21:49Now, I do have the TDS's for these which
- 21:52we can just quickly measure right now.
- 21:55And as expected, these two were
- 21:56relatively similar with the Wren being a
- 21:58little bit higher than the the Alpha
- 22:01right here. However, the Neo was the
- 22:02lowest by not by a lot, but by about
- 22:040.04 TDS. So, in this with how I was
- 22:08doing quick pretty quick brews, you have
- 22:09reflected what I found consistently in
- 22:11my own testing, which is these two tend
- 22:13to extract more than the Neo at a given
- 22:15grind size and at a given flow and at a
- 22:17given pour structure. Those are these
- 22:19are things we have to keep in mind
- 22:20whenever we're looking at drippers. It's
- 22:22kind of difficult to give a review of a
- 22:23dripper because there's so many things
- 22:25to take into account. But with my
- 22:27different approaches off camera, I do
- 22:29find that you tend to have to go finer
- 22:31if you want to bolster the extraction or
- 22:33a TDS to a place where you tend to enjoy
- 22:35it, but it gives you more rounded cups
- 22:37that are for me a little bit more
- 22:38boring. I think it's kind of ideal if
- 22:40you want to do a darker roast. I found
- 22:42the most success doing darker roasted
- 22:44coffees and actually getting pour-overs
- 22:45that are enjoyable, whereas with these
- 22:47or with even a V60, darker roasted
- 22:49coffees for me are not nearly as
- 22:51drinkable. So, I think this does a great
- 22:53job with maybe more medium or darker
- 22:55roasts or if you do like going really
- 22:57fine because that's your style of
- 22:59brewing pour-overs and you're a light
- 23:00roast fanatic, I think this can do a
- 23:03really nice job. You just have to be
- 23:05okay with the effects of what go on when
- 23:07you have a little heightened bypass.
- 23:08Especially the finer you go, the more
- 23:11that bypass will be enacted. The coarser
- 23:13you go, the less that bypass is even
- 23:15going to happen. When you're brewing sub
- 23:172 minutes, even if you have a high
- 23:18bypass capable brewer, you're not going
- 23:20to get nearly as much bypass as you
- 23:22would if you ground finely enough to go
- 23:24to 2 and 1/2 or 3 or more than that in
- 23:26the time of the total drawdown.
- 23:29Now, what's interesting is these flutes,
- 23:31I think do a really good job of
- 23:33disallowing a lot of the bypass and
- 23:34forcing water to be drawn by gravity
- 23:37through that bed. So, with these two, I
- 23:38think you have a lot more of that
- 23:40happening. Even with the heightened kind
- 23:41of potential bypass through the center
- 23:44region of this portion, I do think that
- 23:46it does force a lot of that water to go
- 23:48through the bed. I do think this one,
- 23:49the RAN, is a bit more effective at
- 23:51doing that. I just don't think it
- 23:53necessarily helps with the cup in the
- 23:55end. My favorite between these is the
- 23:57Alpha because I do think it gives me the
- 23:59most
- 24:00of everything that I'm wanting in a cup,
- 24:02which if you know what my preferences
- 24:03are in a V60 or in a pour-over in
- 24:05general, is I want nice clarity. I want
- 24:07to have a more kind of floral
- 24:09presentation. I want to have really
- 24:10structured acidity where there's no like
- 24:13out of balance acrid notes. I want it to
- 24:15be just
- 24:16a floral bouquet with nice acidity
- 24:18presentation and fruits that are
- 24:19structured. I don't want it to be like
- 24:21overly ripe fruit. I don't want it to be
- 24:23you know, sweet and nothing else really
- 24:25in the cup, which I know a lot of you
- 24:27like. And for those of you, maybe the
- 24:28RAN would be a bit better. And then for
- 24:30the Neo, again, I think that is going to
- 24:31do a good job for things like natural
- 24:33coffees that might have too intense of
- 24:35flavor sometimes and is difficult to
- 24:37kind of get out the sourness. If you
- 24:39have problems with sour coffees, I think
- 24:40the Neo can be good for that. But in the
- 24:42end, I think all three of these are are
- 24:45cool additions to the market. I think
- 24:47that probably the biggest step up for me
- 24:49would be the Alpha versus something like
- 24:52the normal V60. So, I still love the
- 24:54normal V60. I don't think that any of
- 24:56these are something that you need to
- 24:58rush out and buy immediately. I don't
- 25:00think any of them are going to give you
- 25:02such an a massive step up that you're
- 25:03going to see, you know, the the light of
- 25:05heaven come shine above you because you
- 25:08found some sort of God type of
- 25:09pour-over. That's not what's happening
- 25:11here. There are minor differences
- 25:13throughout, minor things that can be,
- 25:15you know, exemplified through the
- 25:17geometry of each of these brewers, but I
- 25:19still think that the original V60 is
- 25:21fantastic. And they actually now have a
- 25:23Triton V60, which I would recommend over
- 25:25the normal plastic. This one is way more
- 25:27resistant, way more durable. As you can
- 25:29see with the normal V60, mine have
- 25:30cracks all in it. So, Triton would be my
- 25:33preference when it comes to plastic
- 25:35ones, but of course, you have ceramic,
- 25:36you have metal, you have glass as well
- 25:37that you can kind of go with. The Alpha
- 25:39does also come in ceramic.
- 25:42The Neo, to my knowledge, is only in the
- 25:44Triton right now, and the Ran, I
- 25:46believe, is only in Triton as well. I've
- 25:48not yet seen one in ceramic, but I
- 25:50wouldn't be surprised if one is
- 25:51available somewhere or they're coming
- 25:53out with one in ceramic. But as for now,
- 25:55these are the kind of options. Out of
- 25:57these, if you want ceramic, the Alpha is
- 25:58really the only one that has that
- 26:00capability.
- 26:02My favorite
- 26:03is the Alpha. I think it is my new
- 26:06go-to. I think that the V60, for the
- 26:08most part, will not be used unless this
- 26:10is just I've lost it or something. I
- 26:13absolutely love what the Alpha has given
- 26:14me for my style of brewing, which is,
- 26:17again, more florality, more clarity,
- 26:19more flavor separation, more of that
- 26:20acidity presentation be balanced and to
- 26:22be rounded, and I think the Alpha does a
- 26:24great job. It allows for a faster
- 26:26drawdown without stalling. Same with the
- 26:28other two, though. So, if you're someone
- 26:29that has found issues stalling in a V60
- 26:32with these thin ribs that are pushing it
- 26:33off the wall, well, these two are not or
- 26:36these three, really, are not going to be
- 26:37giving you as much stalling. Let's say
- 26:39that you're a single grinder person,
- 26:40which is the majority of you, and you
- 26:42bought a grinder that's best for
- 26:43espresso, and you find that you have
- 26:45trouble making V60s, they stall or they
- 26:47taste bad. I think that is a perfect use
- 26:49case for the Neo. If you have a grinder
- 26:51that produces a lot of fines or doesn't
- 26:53do the kind of, you know, low fines brew
- 26:55or low fines kind of uni- more unimodal
- 26:57distributions that some people kind of
- 26:59go on about for their high clarity
- 27:01filters, I think the Neo can help clean
- 27:03up your brew quite a lot. I still don't
- 27:06think it'll be obviously as good as a
- 27:07grinder that's more filter focused with
- 27:09something that allows for a bit of a,
- 27:11you know, naturally brighter cup, but I
- 27:13think the Neo can help a lot of people
- 27:15who have lower quality grinders or have
- 27:17issues with stalling or use darker
- 27:19roasted coffees. So, I think this one is
- 27:21actually more of an incentive to be
- 27:24bought, even though it's my least
- 27:25favorite, for a wider majority of
- 27:27people, if that makes sense. So, to be
- 27:30clear there,
- 27:31I don't think anyone needs to rush out
- 27:32and buy any of these
- 27:34at all. I think that the least incentive
- 27:36for me would be the Ran. I think it does
- 27:38a good job, but I think what it does the
- 27:40Neo does better. I think if you're
- 27:42wanting that medium or medium dark, I
- 27:44think the Neo has a bigger,
- 27:46I guess, cost opportunity for someone to
- 27:49have a big increase in the quality of
- 27:51their brews. Seeing at the Neo or the
- 27:53Ran as a switch, and I think both of
- 27:55these do a really nice job using
- 27:57switches. We won't take a lot of time
- 27:58here because we're this is already a
- 27:59long video, but as you can imagine, both
- 28:02of these, I think, do better than a V60.
- 28:04The reason is because they allow for a
- 28:05faster drawdown, especially the Neo. I
- 28:08think this is kind of an ideal one for
- 28:10the switch base because you're not
- 28:12relying on the ribs for the actual
- 28:14extraction. You're doing mostly
- 28:16immersion when you're using a switch,
- 28:18especially well, if you're using kind of
- 28:19more standard recipes that call for a
- 28:212-minute wait, steep, and release. This
- 28:23allows for a much quicker drawdown than
- 28:26the V60 or even the Ran. The Ran also, I
- 28:29think, is a step up over the V60 for the
- 28:31switch because you're never really going
- 28:33to have that stalling issue. You have a
- 28:34lot more of that depressurization due to
- 28:36these flutes. I think it's a really
- 28:38unique option as well. I think both of
- 28:40these
- 28:41I think it's six and half one dozen of
- 28:42the other. It's one of those things
- 28:44where I think you're going to have a
- 28:45great time either one if you're a switch
- 28:47type of person, switch is not my main
- 28:49go-to. I much prefer the clarity and the
- 28:52florality and the flavor separation of a
- 28:54just normal pour-over.
- 28:56But, that is something to consider if
- 28:58you are a switch fan. Maybe we can do
- 28:59deeper into that if we do end up doing a
- 29:01full Hario video. But, anyway, that is
- 29:03my presentation of the three new
- 29:04drippers from Hario.
- 29:06I hope that you enjoyed it. Hope that
- 29:07you learned something. Of course, what I
- 29:09say is not final
- 29:11ever. This is my my point [music] of
- 29:13view, what I think, what I and I'm
- 29:15trying to you know, describe it to the
- 29:17best of my ability. So, I hope this is
- 29:19helpful. I hope you enjoyed it.
- 29:21And if you did, please consider hitting
- 29:22the like and subscribe down below. Helps
- 29:23a lot. Um and that's that's that's about
- 29:26it. Thanks for watching. Hope that you
- 29:28brew something tasty today.
- 29:30And cheers.
About this transcript
This page contains the full transcript of I Tested Every New Hario Dripper. Here's What I Learned. by Lance Hedrick, generated from the public captions YouTube serves with the video. The transcript has 6,198 words across 876 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.