How to use N tool Set Constraint — Transcript

Full transcript

1. 0:01Okay guys, so hello. Today I'll teach
2. 0:04you how to use the O tool. Ah sorry N I
3. 0:08mean N
4. 0:09tool is um
5. 0:19is set constrain mode. Okay so basically
6. 0:23uh there are uh there are times that uh
7. 0:27you cannot just simply snap a panel. So
8. 0:30let's take this for example. Okay. So
9. 0:33there are times that um how much hard
10. 0:36you try you won't be able to snap this
11. 0:39panel. Okay? So that uh where uh our end
12. 0:43tool or set constraint tool comes in.
13. 0:46Okay. So basically it will force that
14. 0:49panel to snap uh with the with the area
15. 0:52that we want to snap it in. Okay. So
16. 0:55take this for example. So we press N.
17. 0:59Okay. So again M is for adjustment.
18. 1:01Correct. And N is for snapping. So we
19. 1:03press N and we select the area that we
20. 1:08want to be uh snapped on. So for example
21. 1:12this one I want to snap with this one.
22. 1:15So we need to make sure that this area
23. 1:17is glued or anchored okay so that it
24. 1:20will not move. So press N and we select
25. 1:23this area. Press O. It means this this
26. 1:28orange dot it means that this uh point
27. 1:32or um panel is glued or permanently
28. 1:36glued. It will not move whatever we do.
29. 1:39And this one we will attach to this one.
30. 1:42Okay. So what we do is okay so this one
31. 1:44is already set. Okay. It's anchored. So
32. 1:48we will select this one. Press Y and
33. 1:52then press Y to this point and press
34. 1:57space. Okay. So again,
35. 2:02so we need to make sure that this uh
36. 2:05area or this um
37. 2:09this uh area will not move because if we
38. 2:12don't uh we don't use um for example we
39. 2:15don't use um O. So if you press space
40. 2:18also this type it works but as you can
41. 2:20see uh
42. 2:22the panel moved from here. So see it
43. 2:26whereas uh we we do not want this area
44. 2:30or this point to move. So we need to
45. 2:33anchor this one. So press O. So orange
46. 2:36means it's it's um it's lock. Okay. So
47. 2:41press Y and then press Y and then space
48. 2:44to connect. As you can see, this area
49. 2:46did not move. Okay, so that's how we use
50. 2:49the O tool. It's very useful if we have
51. 2:51uh panels that basically won't uh snap
52. 2:54to each other.
53. 2:56So, thank