YouTube2Text

How to make your Site Analysys Architecture Map look 3D in Illustrator — Transcript

by Show It Better · 2,435 words · 338 segments · language en · Watch on YouTube

Full transcript

  1. 0:00In this video, I want to show you how I
  2. 0:01take one base plan and turn it into four
  3. 0:04different site analysis maps, [music]
  4. 0:06each one answering a different question.
  5. 0:08So, let's start with the site data. Now,
  6. 0:10there are tons of videos out there on
  7. 0:12where to get your site data, so I won't
  8. 0:13bore you with all the options. I'll
  9. 0:15[music] just tell you what I actually
  10. 0:17use. It's called Remaps. It's free. You
  11. 0:20don't need to sign up, and it gives you
  12. 0:22something most other tools won't, which
  13. 0:24is a full site analysis with separate
  14. 0:26layers already organized for you. So,
  15. 0:29let me show you how it works. [music]
  16. 0:31So, if you open Remaps, you can go to
  17. 0:32your site and draw a rectangle around
  18. 0:35the area you want a map of, like for
  19. 0:37example, right here. And here's a small
  20. 0:39tip that will save you a lot of pain
  21. 0:41later. Try to keep your main site as
  22. 0:43close to the middle of the rectangle as
  23. 0:46possible, please. I beg you. This is so
  24. 0:48important. This is going to matter a lot
  25. 0:50when we start composing styling our
  26. 0:53image. And as soon as you select your
  27. 0:54area, Remaps shows you how the map will
  28. 0:57look. It gives you some extra info and
  29. 0:59asks for confirmation. A few seconds
  30. 1:02later, this is what you get. You can
  31. 1:03either open it directly in Remap Design,
  32. 1:05like this, or you can export it as a CAD
  33. 1:08file. Again, all of this for free. I
  34. 1:11haven't signed up for anything at all.
  35. 1:13Below, you can see site metrics, area,
  36. 1:16number of buildings, built footprint,
  37. 1:19green coverage. Then, it gives you two
  38. 1:22map options, feature breakdown and
  39. 1:24program breakdown. Depending on which
  40. 1:27one you download, you can have very
  41. 1:28specific information about your site. As
  42. 1:31always, double-check this against the
  43. 1:34info you have of the project, but these
  44. 1:36two maps are the most common ones we
  45. 1:39tend to create when we're doing site
  46. 1:40analysis. So, having them almost ready
  47. 1:43is a huge time-saver. Now, what I really
  48. 1:45want to show you is how to take these
  49. 1:47maps to another level. How to adjust the
  50. 1:50color, the line, the story, how to
  51. 1:52basically show it better. So, I'll do
  52. 1:54most of this in Illustrator, and later
  53. 1:56in the video, I'll show you how the same
  54. 1:58thing can be done inside of Rayon
  55. 2:00Design. That way, you can choose
  56. 2:02whatever program fits your workflow
  57. 2:04best. So, I'll import the DXF into
  58. 2:07Illustrator and select original size.
  59. 2:09Now, if you wanted to adjust the scale
  60. 2:10of the paper, you'd have to modify the
  61. 2:13unit and change it to either centimeters
  62. 2:15or inches. But now comes the most
  63. 2:17important but underrated part of any
  64. 2:20site analysis, the dirty work, the work
  65. 2:22that nobody wants to do, which is the
  66. 2:25cleanup, the cleaning up your file.
  67. 2:27Because if you look closely layer by
  68. 2:29layer at our current map, you can see
  69. 2:31things like, for example, the water
  70. 2:33layer is not closed off. There's a layer
  71. 2:35called road surfaces that isn't really
  72. 2:37useful for us, and it's better to just
  73. 2:40delete it, of course. And the road
  74. 2:42layers are just a bunch of lines. There
  75. 2:44are no actual fills or regions that
  76. 2:46distinguish one road from the
  77. 2:48background. Now, I won't bore you with
  78. 2:50every single fix, but just know this,
  79. 2:52this file, or any file for that matter,
  80. 2:55does not look perfect from the start 99%
  81. 2:58of the time. You have to clean up, and
  82. 3:01this is how the file looks like before,
  83. 3:03and this is how it looks like after the
  84. 3:05cleanup. I haven't added anything, I
  85. 3:07just cleaned it up, and honestly, this
  86. 3:09step alone already makes your map look
  87. 3:12more intentional than 90% of the site
  88. 3:15maps out there. Now, we got to the best
  89. 3:17part, which is color. It's the most
  90. 3:20satisfying step, but if you don't choose
  91. 3:23your colors well, it can also fall apart
  92. 3:25really fast. Now, I'll even go further,
  93. 3:27I think the real secret to [music] a
  94. 3:29good-looking site map is the color
  95. 3:31choice, not necessarily the detail or
  96. 3:33not the line work, but the color. And
  97. 3:35because I'm going to create several maps
  98. 3:38from the same file, I need a palette
  99. 3:40that makes all of them feel like they
  100. 3:42belong to the same series without making
  101. 3:44them look identical. So, I'll use this
  102. 3:47palette right here, you can screenshot
  103. 3:49it if you want or save it for later, and
  104. 3:52once you have it, just [music] paste it
  105. 3:53inside of your Illustrator file and use
  106. 3:56the color sampler to pull the colors
  107. 3:58into each layer and into each object.
  108. 4:00So, I'll start by turning off some
  109. 4:02layers like the nature layer. I'll add a
  110. 4:04background layer and make it a sort of
  111. 4:05grayish off-white like this one. Then,
  112. 4:08I'll grab the main streets, the ones I
  113. 4:11I've drawn separately, and make sure
  114. 4:13their fill is completely white. And for
  115. 4:16the buildings, I'll select all of them
  116. 4:18and change the fill to dark gray [music]
  117. 4:20and turn off the stroke. Now, here's a
  118. 4:23small trick that I I always use with
  119. 4:25buildings. First, let's get this layer
  120. 4:27and let's duplicate it. If you hold Alt
  121. 4:30and drag the layer down, you create a
  122. 4:32copy. Then, with the arrow keys, move it
  123. 4:35down and a bit to the left. Finally,
  124. 4:38darken the fill of this duplicated
  125. 4:40layer. And now, it looks like the
  126. 4:42buildings are casting shadows. It's a
  127. 4:44tiny detail, but it really makes a huge
  128. 4:46difference if you want to add, you know,
  129. 4:48some some depth to this
  130. 4:51site plan. Now, for the water, I'm going
  131. 4:53to use another trick that makes it look
  132. 4:56way more layered and technical than just
  133. 4:58a flat blue shape. First, let's change
  134. 5:01the color to a more muted pale blue,
  135. 5:03like for example, this one. Then, with
  136. 5:06the shape selected, I'm going to go to
  137. 5:08object, path, offset path. And we want
  138. 5:11to create an inner offset. So,
  139. 5:13type something like for example, -20, or
  140. 5:17you know, let's put -30 and let's press
  141. 5:20okay. Then, with the second shape
  142. 5:22selected, go to the color window and
  143. 5:25drag the color picker down and to the
  144. 5:28right diagonally. This makes the color
  145. 5:30darker and more saturated, but it keeps
  146. 5:34it within the same tone. And you have to
  147. 5:36repeat this step at least two or three
  148. 5:38more times. And now, the water doesn't
  149. 5:40look like a flat surface. It feels like
  150. 5:42it has depth, like there's [music]
  151. 5:44something to actually look at. And
  152. 5:46honestly, this is one of those tricks
  153. 5:47that takes 30 seconds and it makes the
  154. 5:50whole map look 10 times better. I'll
  155. 5:52make sure my main building is in a
  156. 5:53different color than the rest, of
  157. 5:55course. This case, a darker gray, and
  158. 5:57I'll manually draw a shadow layer for it
  159. 6:00so it really stands out and makes it
  160. 6:02obvious that this is the site, of
  161. 6:03course. And to finish off this style,
  162. 6:05I'll create a layer called text, draw a
  163. 6:08rounded rectangle, color it dark gray,
  164. 6:11and place some [music] white text on
  165. 6:13top. I'll name my main site and group
  166. 6:16everything together. Then I'll copy this
  167. 6:18label to other important places like,
  168. 6:20for example, parks, train stations,
  169. 6:22public buildings, etc. And now we have
  170. 6:25our first site analysis map. It didn't
  171. 6:27take that long, but if you compare it to
  172. 6:29what we started with, the difference is
  173. 6:30huge. I'll save this one as a separate
  174. 6:33file just in case I need it and move on
  175. 6:36to the next. Now, for the second map,
  176. 6:38I'll do it in three really simple steps.
  177. 6:41First, let's change the main building
  178. 6:43color to red. I like to use this red.
  179. 6:46It's not too bright, but it's well
  180. 6:48saturated. You know, sometimes I feel
  181. 6:50like I talk a lot about colors, and
  182. 6:54honestly, this is just how I think I am
  183. 6:56in real life. When we were getting
  184. 6:57coffee at some point, I probably end up
  185. 7:00talking about colors. Anyway, first, you
  186. 7:02know, change your building to red.
  187. 7:03Second, change the [music] rest of the
  188. 7:05buildings to dark gray, not black, but
  189. 7:08dark gray. There's a huge difference
  190. 7:10between both of these colors. And third,
  191. 7:12let's turn off the shadows. And voila,
  192. 7:15now we have our figure ground analysis
  193. 7:18map or our nolly map, whichever way you
  194. 7:21want to call it best. We have two maps
  195. 7:23now. It's looking really, really good.
  196. 7:26Now I know what you're thinking. You
  197. 7:27probably need to show more stuff,
  198. 7:28vegetation, program, access, right?
  199. 7:31Well, that's what the next two maps will
  200. 7:33do. So for map three, I'll change the
  201. 7:35buildings to white and add a black
  202. 7:37stroke around them. Then I'll turn the
  203. 7:39vegetation layer back on, and here's
  204. 7:41where I to add some texture [music] and
  205. 7:43depth because a flat layer of green is
  206. 7:46one of the things that makes the site
  207. 7:48maps feel kind of cheap. And first, I'll
  208. 7:51select all the vegetation [music] and
  209. 7:53change the color to this one, a more
  210. 7:55saturated, colorful green. But, there's
  211. 7:58a problem. A single tone of green
  212. 8:00doesn't actually represent [snorts]
  213. 8:01what's in the site. If you open the
  214. 8:03location in Google Earth, you can see
  215. 8:05the site isn't uniformly green at all. I
  216. 8:08mean, it's obvious. So, what we want to
  217. 8:09do is start varying the green to
  218. 8:11actually represent that. So, for
  219. 8:13example, I'll go to the train tracks and
  220. 8:14change those to a grayish green because
  221. 8:17obviously we know train tracks are not
  222. 8:19actually green. For example, for the
  223. 8:20public park here, I'll also change that
  224. 8:23to darken it to another green. The
  225. 8:25important thing here is to stay within
  226. 8:27the same hue and just adjust the
  227. 8:29saturation and brightness. Remember the
  228. 8:31diagonal line that we talked about. So,
  229. 8:33I'll alternate between the three hues of
  230. 8:35green and start coloring different areas
  231. 8:37depending on their use, scale, or their
  232. 8:40character. Then, I can turn on the tree
  233. 8:42layer, select all the trees, and shift
  234. 8:44the hue so they sit nicely within the
  235. 8:47rest of the green areas. And this is how
  236. 8:49the map looks like in its third style.
  237. 8:51Finally, to add the program data to our
  238. 8:53map, here's a small trick that saves a
  239. 8:56[music] lot of time. Go to your layers
  240. 8:58options in the top right corner and make
  241. 9:00sure the paste remembers layers is on.
  242. 9:03Then, go to your program file, select
  243. 9:05all the layers, press control C, and
  244. 9:08back in our base file, press control V,
  245. 9:11and select create a new color swatch and
  246. 9:14apply to all. And now, I have all of my
  247. 9:16program layers inside of my main file.
  248. 9:19Now, to color them, I'll use a tool
  249. 9:22nobody really talks about, which is the
  250. 9:24built-in color libraries in Illustrator.
  251. 9:27So, for this, let's go to window, let's
  252. 9:29[music] go to swatch libraries, and
  253. 9:31let's select landscape. Then, I'll pick
  254. 9:34this specific color palette. I'll click
  255. 9:36on the office layer and click on the
  256. 9:38first color. I'll click on the
  257. 9:39commercial layer now and now pick the
  258. 9:41next color and so on and so forth until
  259. 9:44all of your layers look like this. And
  260. 9:46finally, I'll change the stroke of the
  261. 9:48building layer to a darker
  262. 9:50reddish-brown. And there you have it,
  263. 9:53four site analysis maps, one base file.
  264. 9:56Now, here's what I want you to take away
  265. 9:57from this. The reason most site maps
  266. 10:00don't work is not because they're
  267. 10:02missing detail. It's because every
  268. 10:04element in them is fighting for
  269. 10:06attention. In a good site map decides
  270. 10:08what you should look at first. And the
  271. 10:09way you make that decision is mostly
  272. 10:12through color. Well, at least that's
  273. 10:14what I think. Now, everything I just
  274. 10:16showed you in Illustrator, you can also
  275. 10:17do inside Rayon Design. And honestly, in
  276. 10:20some ways, it's even faster. Rayon is
  277. 10:22sponsoring this segment of the video and
  278. 10:24I want to take a moment to show you how
  279. 10:26the same workflow works inside of their
  280. 10:29platform. So, we go back to Rayon Maps,
  281. 10:32but this time instead of exporting to
  282. 10:34CAD, we'll select open in Rayon. You can
  283. 10:37create a Rayon account completely for
  284. 10:39free and when the file opens, you can
  285. 10:41modify the colors of each field
  286. 10:42directly. So, I'll change the building
  287. 10:44colors, change the water color, and add
  288. 10:47a background color. It's really
  289. 10:49straightforward, but the big advantage
  290. 10:51here is that [music] I can create sheets
  291. 10:54that are ready to print or present. So,
  292. 10:56once you have all of your site maps
  293. 10:58ready, like for example, these, you can
  294. 11:00go to your canvases and create a new
  295. 11:02one. I'll select paper canvas [music]
  296. 11:05and click on create page. Then, I'll
  297. 11:08select create view from import and
  298. 11:10adjust the view of my main map inside
  299. 11:13the paper canvas. I'll create three
  300. 11:16smaller circles next to the main map.
  301. 11:19I'll select them, I'll click convert to
  302. 11:21view, and define the view for each one.
  303. 11:24Next, I'll adjust the scale and framing
  304. 11:27until they all look right. Then, I'll go
  305. 11:29to the Rayon block library, which has
  306. 11:31hundreds of really useful blocks, and
  307. 11:34type in title block, and I'll pick the
  308. 11:37one that fits this plan [music] best.
  309. 11:38Like for example, this one. I'm going to
  310. 11:40download it. I'm going to drop it into
  311. 11:42my drawing. I'm going to adjust the
  312. 11:45scale and modify things like for
  313. 11:48example, the project info, the name, the
  314. 11:50scale, all of that. I can also add extra
  315. 11:53text to each drawing. I can swap in my
  316. 11:55logo and add a north symbol and add any
  317. 11:58other important details that I want. And
  318. 12:00just like that, I have a really
  319. 12:02impressive site plan that's ready to
  320. 12:04present and ready to export. I want to
  321. 12:07thank Rayon for sponsoring this video
  322. 12:08and helping us make more content like
  323. 12:12this. There's a link in the description
  324. 12:13to sign up for Rayon completely for free
  325. 12:16if you want to try it. So, out of the
  326. 12:17four maps I showed you, which style did
  327. 12:20you like the most and why? And what
  328. 12:22other site analysis tutorials do you
  329. 12:24want me to make? Let me know in the
  330. 12:26comments. I actually read them and I'm
  331. 12:28eager to continue the conversation down
  332. 12:29there. If you want to see how I apply
  333. 12:31this same thinking to floor plans with
  334. 12:33three different levels of complexity,
  335. 12:36you can watch this video right here.
  336. 12:38Now, that's all for this video. Thank
  337. 12:40you all for watching and I'll see you in
  338. 12:42the next one. Bye.

About this transcript

This page contains the full transcript of How to make your Site Analysys Architecture Map look 3D in Illustrator by Show It Better, generated from the public captions YouTube serves with the video. The transcript has 2,435 words across 338 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.