How to make 90s Atmospheric Jungle Pt.2 (Drum Break Layering) — Transcript
Full transcript
- 0:00okay so now let's have a little look at
- 0:01the drum brakes and really the key to
- 0:03getting these brakes to roll nicely is
- 0:06to leave some of the natural offset or
- 0:07the natural swing in the drums and this
- 0:10means we're not going to quantize stuff
- 0:11too heavily and there's really two
- 0:13techniques I want to show you of how we
- 0:15can achieve this and the first one I've
- 0:17got here is actually to put longer
- 0:20slices in so you can see I've got this
- 0:22aiming break here but rather than
- 0:23chopping it at all the individual slices
- 0:25I've put in slightly kind of longer
- 0:28sections or phrases of where I put my
- 0:30slices in this break and there's also
- 0:32two settings I've turned on and one of
- 0:34them is play to end which is going to
- 0:35mean the slices are going to play
- 0:37through one another to the end of the
- 0:39whole sample
- 0:41[Music]
- 0:42and the next one is mono so I'm going to
- 0:45make the break uh have one voice and
- 0:47that means whenever I trigger a new
- 0:49slice it's going to cut the previous one
- 0:50off
- 0:51[Music]
- 1:01and the way this is really working is we
- 1:04can program quantized in MIDI so we can
- 1:07always program on the grid in MIDI and
- 1:09that's going to mean our kicks and
- 1:10snares whenever we program them in
- 1:12they're going to be quantized but then
- 1:14by dragging out the midi notes we can
- 1:16bring in some of the natural groove of
- 1:18the drummer and so your kicks and snares
- 1:20are going to be mainly quantized but
- 1:22then all of the rest of the hits are
- 1:23going to be left a bit more natural
- 1:25[Music]
- 1:32[Music]
- 1:34thank you
- 1:36this is how it start start doing the
- 1:38bikes if you listen to this line here
- 1:40that's just the one straight upright as
- 1:43it was
- 1:47just the kick kick drum here and this is
- 1:49the snow so you can split it
- 1:52and you can you know you can do whatever
- 1:53you want with it really just those
- 1:55stupid
- 1:58laughs
- 2:01so that's the that's the main
- 2:04sort of jungle technique of making the
- 2:06Drone okay so the second technique I
- 2:08want to show you is actually something
- 2:09called gate to Tempo and what we've got
- 2:11to do is slice the break up but all the
- 2:13hits this time
- 2:14and then in logic I would right click
- 2:16and convert to new sampler track so I'm
- 2:18converting the audio to MIDI
- 2:20and then one other thing I have to do is
- 2:22slice this new midi region to fit
- 2:25perfectly with the size that the
- 2:27original break was and then what I can
- 2:29do is actually warp the midi to fit this
- 2:32is a one bar break and so I can walk the
- 2:34midi to one bar at my project tempo
- 2:37and what's actually happening here is I
- 2:40can get this break to roll around at my
- 2:42new drum and bass speed and I haven't
- 2:45time stretched it and I haven't um
- 2:47pitched it up but I'm actually just
- 2:48gating all the hits so if I kind of move
- 2:51these audio regions around this is
- 2:53what's really happening is I'm just
- 2:54chopping
- 2:56um the break off all these different
- 2:57points to make it actually retain its
- 3:00Groove at the project tempo
- 3:02but what happens when you do this is you
- 3:04get all the kind of original Groove
- 3:06comes through in the midi here and so
- 3:08what I would usually do is quantize some
- 3:10of these uh
- 3:12those are the kicks this is the snare
- 3:15and then I know this is all the shuffly
- 3:16stuff
- 3:17and that's kind of music so I don't need
- 3:20all the music so this is all the part of
- 3:22the break that I can really use and then
- 3:25I would take this little phrase or
- 3:27section and then move the whole thing
- 3:28along so the snares quantize within all
- 3:30these hits even though they've been
- 3:32moved along they're still retaining some
- 3:35of that natural Groove and Shuffle
- 3:37and so then I can come and program my
- 3:40break but I would always retain the hits
- 3:42having this uh this Shuffle in them so
- 3:44whenever I programmed this section I
- 3:46would drag it along like this and make
- 3:48sure that all these hits were still
- 3:49retaining that Groove and so that's the
- 3:52basic premise for how I did the brakes
- 3:53in this project and the real advantage
- 3:56to doing it this way is you have control
- 3:58over all the hits and so when you're
- 4:01doing your brake layering like I've done
- 4:03here you can see I've got these shuffles
- 4:05I'm having to offset them in this
- 4:07layered break to match with my um
- 4:10original break and so as I'm building up
- 4:13these layers in order to get the
- 4:14layering tight you have to really match
- 4:16up the hits and get the grooves of both
- 4:18the layers to sound good together
- 4:20[Music]
- 4:28for this telegram base it's really
- 4:30common to layer lots of breaks together
- 4:31and I've actually done six breaks in my
- 4:33track and some of them are more tight
- 4:35and snappy and some are more tonal and
- 4:38I've got some with writing so you want
- 4:39to find a mix and blend of lots of
- 4:41different breaks to give you lots of
- 4:42options
- 4:43um when you're doing this layering
- 4:52and then I have two more tonal breaks
- 4:55here so I have this uh funky Nassau
- 5:05foreign
- 5:10each other exactly They're all playing a
- 5:13similar Groove and they're really
- 5:15following
- 5:16um this primary break so I kind of
- 5:18matched all of those breaks to this one
- 5:19and that's just to make things sound
- 5:21cohesive because it can get really crazy
- 5:23when they're doing multiple breaks if
- 5:25you've got too many different
- 5:26conflicting ideas going on so I think
- 5:28even though there will be little bits of
- 5:30variation happening keeping kind of the
- 5:32core rhythm is important
- 5:34[Music]
- 5:40thank you
- 5:45so we're break layering the choice of
- 5:47breaks is really important and also
- 5:49getting the hits to align and getting
- 5:51everything to sound tight is also really
- 5:53important but there's a few other things
- 5:55you can use to help make everything
- 5:56sound more cohesive and one of them is
- 5:59actually tuning the brakes around SO
- 6:00pitching certain breaks up
- 6:03will make them sound a little bit
- 6:04tighter more Snappy
- 6:06um and sometimes they just need to be
- 6:08pitched around a little bit to make
- 6:09certain breaks work together
- 6:22and then the next most important thing
- 6:24is actually just to use EQ and I have
- 6:26tonally shaped every single one of these
- 6:28breaks to fit with each other and to
- 6:31bring the most of them out or just shape
- 6:33them for their purpose in this uh brake
- 6:35layer so you can see with these ride
- 6:36breaks I don't really need any of the
- 6:39low energy from those brakes because I'm
- 6:40just taking the rise in the crashes with
- 6:43these ones I'm pulling out annoying
- 6:45resonances and boosting the highs and
- 6:47just molding everything to really fit
- 6:49nicely together so it's really important
- 6:52to use EQ to tonally shape your brakes
- 6:55is probably the most useful tool in Your
- 6:57Arsenal there the final one for me is
- 6:59actually to program a 16 Bar Loop right
- 7:01from the beginning now lots of you will
- 7:04probably start just doing maybe a four
- 7:06bar or an eight bar Loop of the drums
- 7:07and then you'll move on to other
- 7:09instruments but I think it's really
- 7:10important to stick with the drums and at
- 7:13the very least do a full 16 Bar
- 7:16um cycle with lots of variations and
- 7:18interesting if I play this break this is
- 7:21how I started this project is
- 7:22programming this first 16 bars of this
- 7:24top break and then I laid in my new
- 7:26brakes one by one following this same
- 7:28rhythm
- 8:14and the whole point is you put in all
- 8:16this effort at the start of your project
- 8:18and build up all these layers and then
- 8:19when you actually come to the
- 8:21arrangement stage of making the track
- 8:22you can see all I've had to do here to
- 8:25build up this entire drum sequence is
- 8:26just mute things and bring them in and
- 8:28out at different times and so it makes
- 8:30it really easy when you get to the
- 8:32arrangement stage and I can show you
- 8:33here just in this little section of the
- 8:35track what's going on with these drums
- 8:37[Music]
- 8:40foreign
- 8:51[Music]
- 9:22foreign
- 9:26[Music]
- 10:03foreign
- 10:16[Music]
About this transcript
This page contains the full transcript of How to make 90s Atmospheric Jungle Pt.2 (Drum Break Layering) by Groovin in G, generated from the public captions YouTube serves with the video. The transcript has 1,422 words across 214 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.