How to Fix Shizuku Not Running Problem on Non-Rooted Devices | shizuku app is not working — Transcript

Full transcript

1. 0:00Hey guys, are you seeing the Shizuku is
2. 0:02not running error in the Shizuku app?
3. 0:04Don't worry, you're not alone and this
4. 0:06is easy to fix. In this video, I'll show
5. 0:09you two methods to fix the Shizuku not
6. 0:11running problem without root access.
7. 0:13Even if you are a complete beginner,
8. 0:15you'll be able to run Shizuku without
9. 0:17any errors. So, let's start with method
10. 0:19one, starting Shizuku using Wi-Fi, also
11. 0:22called wireless debugging.
12. 0:25First tap on the pairing option and
13. 0:27Shizuku will ask for notification
14. 0:29permission. Just go ahead and allow
15. 0:31notification permission for Shizuku.
16. 0:33This is required for the pairing
17. 0:35process.
18. 0:37Next, we need to enable developer
19. 0:38options on your phone. So, go to phone
20. 0:41settings and open about phone.
21. 0:44Here, look for build number and tap on
22. 0:46it seven times until you'll see a
23. 0:48message saying developer options are
24. 0:50enabled.
25. 0:52Once enabled, go back to the main
26. 0:54settings screen and open system
27. 0:56settings.
28. 0:58Here you will now see developer options.
29. 1:00Just open it.
30. 1:02After that, go back to the Shizuku app
31. 1:05and tap on the developer options
32. 1:06shortcut inside Shizuku
33. 1:09here. Scroll down and look for wireless
34. 1:12debugging. Make sure your phone is
35. 1:14connected to a Wi-Fi network because
36. 1:17this will not work without Wi-Fi.
37. 1:20Now open wireless debugging and tap on
38. 1:23pair device with pairing code. As soon
39. 1:25as you do this, you'll receive a
40. 1:27notification saying pairing device found
41. 1:30just like you can see here. Now simply
42. 1:32enter the six-digit pairing code shown
43. 1:34on the screen into that notification.
44. 1:36Then tap on send.
45. 1:40Once the pairing is complete, you'll see
46. 1:42a message saying pairing successful.
47. 1:45After that, go back to the Shizuku app.
48. 1:48Inside Shizuku, tap on the start button
49. 1:50to start the Shizuku service.
50. 1:53And yes, that's it. As you can see,
51. 1:56Shizuku is now running successfully.
52. 1:58Now, if Shizuku still says it's not
53. 2:00running, don't panic. Let's fix it using
54. 2:03method two. Running Shizuku using ADB
55. 2:06with the help of another Android phone.
56. 2:08As you can see on the screen, Shizuku is
57. 2:11not running. To fix this, we need to run
58. 2:13an ADB command using another phone.
59. 2:16Before we do anything, make sure USB
60. 2:18debugging is enabled on your main phone
61. 2:20from developer options.
62. 2:22Next, grab your second Android phone and
63. 2:26install the Reflash app from the link in
64. 2:28the description. This is an app that Oal
65. 2:31and I built together. It's an all-in-one
66. 2:33app for ADB and fast boot related tasks,
67. 2:36specially made for beginners, so you
68. 2:38don't need to type any confusing
69. 2:39commands manually. Now, connect both
70. 2:41phones using a USB cable.
71. 2:45Once you tap on scan device, you may see
72. 2:48a pop-up on your main phone. Just tap
73. 2:51allow to grant access. In my case,
74. 2:54permission was already granted. That's
75. 2:56why it didn't ask me again.
76. 3:00Here you will see two commands. You can
77. 3:03find both of them in the description
78. 3:04below. We only need to run one command,
79. 3:07but if the first one doesn't work, you
80. 3:09can try the second one. Let me copy the
81. 3:11first command and run it inside the ADB
82. 3:13terminal section.
83. 3:17As you can see, this command returns a
84. 3:19not found error, which means it didn't
85. 3:21work on this device. That's completely
86. 3:23normal. So, let's try the second command
87. 3:26instead. I'll copy the second command
88. 3:28and run it now.
89. 3:34And yes, this one works. Shizuku has
90. 3:38started successfully and the Shizuku is
91. 3:40not running error is now gone.
92. 3:44As Shizuku is now running, you can use
93. 3:46or authorize any app that requires
94. 3:48Shizuku. Just keep one thing in mind. If
95. 3:51you restart your phone, Shizuku will
96. 3:53stop again and you'll need to run the
97. 3:55same ADB command to start Shizuku again.
98. 3:58So, that's how you fix the Shizuku is
99. 4:00not running problem without root. If
100. 4:02this video helped you, make sure to like
101. 4:04the video and subscribe to the channel.
102. 4:07Thanks for watching and I'll see you in
103. 4:08the next one.