How To EASILY Find The Draw On Liquidity (DOL) | ICT Concepts — Transcript
Full transcript
- 0:00Yo, how's it going everyone? Welcome
- 0:02back to another video. In today's video,
- 0:05we're going to go over how I find my
- 0:06draw on liquidity. This is what I do
- 0:09every single morning to determine my
- 0:11bias for the day. You guys can also see
- 0:13me doing this in trade recaps. So, to
- 0:15identify your draw on liquidity, I use
- 0:18the higher time frames, that being the
- 0:20daily, the 4-hour, the 1-hour,
- 0:2230-minute, and 15-minute chart. This is
- 0:25where you can identify your possible
- 0:27DOLs. So, let's first understand what a
- 0:30draw on liquidity is. So, a draw on
- 0:33liquidity can be identified as external
- 0:35range liquidity or internal range
- 0:38liquidity, where price will tend to
- 0:40trend towards. So, for external range
- 0:42liquidity, you want to look for swing
- 0:44highs and lows that are above the
- 0:4615-minute chart. This will classify it
- 0:49as high time frame liquidity, and this
- 0:51is where the majority of sell or buy
- 0:53stops will be placed. Then, you have
- 0:55session highs and lows. This will be
- 0:57London lows, London highs, Asian lows,
- 1:00Asian highs. You also want to identify
- 1:02low resistance liquidity leading up to
- 1:05your main DOL, and we'll go further and
- 1:07explain that later on in this video. For
- 1:10internal range liquidity, you want to
- 1:12identify unmitigated fair value gaps
- 1:14that are 15 minutes and above, and a
- 1:17bonus is marking out time-based
- 1:19liquidity, that being midnight, 18,
- 1:229:30, and the 9:30 wick. I also use
- 1:25volume imbalances to identify possible
- 1:27draws. On the right-hand side, you can
- 1:30see that we have a proper checklist in
- 1:32order to identify the correct draws on
- 1:34liquidity going into every single day.
- 1:37So, first you want to identify the draw
- 1:39on liquidity based on the market maker
- 1:41buy or sell model framework. You want to
- 1:44be asking yourself, are we delivering
- 1:46from the buy side of the curve or buy
- 1:48side liquidity, or are we delivering
- 1:50from the sell side of the curve or sell
- 1:53side liquidity? Second, you want to
- 1:55identify high resistance versus low
- 1:57resistance. Third, you want to see are
- 1:59we disrespecting or respecting bullish
- 2:02or bearish fair value gaps. This is how
- 2:04you can set your high time frame
- 2:05scenarios. Fourth, we're going to go
- 2:07into premium and discount, and finally
- 2:10how we can take a low time frame
- 2:12confirmation entry towards the possible
- 2:14DOLs that we have identified throughout
- 2:17the day. Starting off with number one,
- 2:19identifying a draw on liquidity by using
- 2:22the market maker profile. You want to
- 2:24ask yourself, are we from the buy side
- 2:27of the curve or buy side liquidity or
- 2:30are we delivering from the sell side of
- 2:31the curve or sell side liquidity? You
- 2:34can see in the first example, we are in
- 2:36a market maker buy model where we
- 2:38generate buy side liquidity. Price will
- 2:41then sweep a high time frame low, which
- 2:44is sell side liquidity where we will be
- 2:46given the opportunity to reverse in
- 2:49order to be on the buy side of the curve
- 2:51to take out that buy side liquidity.
- 2:54Then in the second example, you can see
- 2:56we're delivering from buy side liquidity
- 2:58where we generate a market maker sell
- 3:00model in order to target the sell side
- 3:03liquidity below. So now moving on to the
- 3:06second step of the checklist, you want
- 3:08to identify where high resistance
- 3:10liquidity versus low resistance
- 3:12liquidity is being presented in these
- 3:14market maker frameworks. So you can see
- 3:17in the first example, we sweep sell side
- 3:19liquidity on the high time frame. You
- 3:21also want to identify do we react out of
- 3:24a high time frame fair value gap? That
- 3:27being the 15 minute and above. And if
- 3:30so, you can then classify this as high
- 3:32resistance. Then since we are in a
- 3:35market maker buy model profile, you can
- 3:37see to the left side of the curve if we
- 3:40have any low resistance liquidity built
- 3:43up. Onto the second example in a market
- 3:46maker sell model, you want to identify
- 3:48us sweeping high time frame buy side
- 3:51liquidity reacting out of a high
- 3:53timeframe PD array, that being a
- 3:5515-minute or above, then you want to see
- 3:58if on the left side of the curve, do we
- 4:01have low resistance liquidity built upon
- 4:03that? Then you would be able to take an
- 4:06entry for the buy side of the curve, you
- 4:08would take entries long. For the sell
- 4:10side of the curve, you want to be taking
- 4:12entries short. So, now moving to our
- 4:14chart example, we're going to apply how
- 4:17to identify the DOL using market maker
- 4:20profiles as well as high resistance
- 4:22versus low resistance liquidity. You can
- 4:24see right now the market is trending
- 4:26towards these highs. We're inside of a
- 4:28high timeframe market maker buy model,
- 4:31so you can assume that we're trending
- 4:32towards this buy side liquidity above.
- 4:35Now, I want you guys to apply that high
- 4:37resistance versus low resistance. To
- 4:39identify this, you want to see where did
- 4:41the market sweep liquidity? Well, you
- 4:44can see that we aggressively sweep the
- 4:45sell side liquidity on the 4-hour chart.
- 4:48Going on to the 1-hour chart, you can
- 4:50also see that we manipulate into a high
- 4:53timeframe PD array right here. If we
- 4:56drag it all the way out, you can see
- 4:57that price aggressively wicks inside of
- 5:00it and we immediately reject above it.
- 5:03So, in our high resistance criteria, you
- 5:06can see that we tap into a high
- 5:07timeframe PD array, we sweep liquidity,
- 5:10and we immediately displace higher,
- 5:12which is what you want to see. Then
- 5:14looking at the left side of the curve,
- 5:16if I draw a vertical line, you can see
- 5:18that we have stacked trendline liquidity
- 5:21and failure swings in order for us to
- 5:23target. So, going into the day and the
- 5:26daily profile, you can assume that we're
- 5:28in a market maker buy model and we're
- 5:31trending towards this buy side
- 5:32liquidity. So, ideally going into the
- 5:35day, you want to be taking continuation
- 5:37longs. After we have identified our
- 5:39possible draw on liquidity, in this
- 5:41example, this is our buy side objective
- 5:44on the high timeframe, and understanding
- 5:46that this is high resistance, if we just
- 5:48play out price, you can see that we do
- 5:50deliver to this buy side liquidity and
- 5:53taking out all the low resistance
- 5:54liquidity to the left side of the curve.
- 5:57Now that we've understood how to
- 5:59identify the draw on liquidity by using
- 6:01market maker profiles and high
- 6:03resistance versus low resistance
- 6:05liquidity, we now have to identify how
- 6:08to catch an entry or a continuation
- 6:11towards that correct draw on liquidity
- 6:13in order to catch a high probability
- 6:15trade. And this can be done by using the
- 6:18disrespect versus respecting framework
- 6:21and setting conditions for high time
- 6:23frame scenarios. So, in the first
- 6:25example, you can see that we are still
- 6:27in a market maker buy model assuming
- 6:30that we swept liquidity and reacted out
- 6:32of a high time frame PD array, we have
- 6:35low resistance liquidity built up. In
- 6:37this manipulation leg, you want to see
- 6:40us expand and displace higher and
- 6:42setting a high time frame condition that
- 6:45being the 15-minute fair value gap or
- 6:48higher. When price retraces into this
- 6:51fair value gap, you want to set an if
- 6:53this then that scenario. So, if we were
- 6:56to respect this 15-minute gap or above,
- 6:59we can expand higher and expect these
- 7:01draws above. Or if we disrespect and
- 7:05fail to displace higher outside of this
- 7:07fair value gap, we can then expect
- 7:09continuation lower. Moving on to the
- 7:12second example, you can see that we are
- 7:15in a market maker sell model and we
- 7:17displace and create a high time frame
- 7:19condition assuming that this is a high
- 7:22time frame fair value gap, we can then
- 7:24set an if this then that statement. If
- 7:27we react inside of this 15-minute fair
- 7:29value gap, we can then expect this low
- 7:31resistance liquidity to the sell side to
- 7:34be targeted and catching a trade where
- 7:37we take out that sell side liquidity.
- 7:39So, using the disrespect versus
- 7:41respecting framework, let's jump onto a
- 7:43chart example and see how we can use
- 7:45this in the live market. So, now moving
- 7:48to our next chart example, we're going
- 7:50to apply everything we learned as well
- 7:52as this disrespect versus respecting
- 7:54framework. So, as you can see on the
- 7:57high time frame, we distribute lower and
- 7:59then we suddenly have an expansion move
- 8:01higher where we print out this
- 8:03aggressive wick. Well, what did this
- 8:05wick actually do? You can see that we
- 8:08sweep liquidity on the high time frame
- 8:10and also react out of this 1-hour
- 8:13unfilled fair value gap. So, now you can
- 8:15assume that this is high resistance
- 8:18because we sweep liquidity and react out
- 8:20of a high time frame PD array and we're
- 8:22continuing to disrespect bullish fair
- 8:25value gaps while respecting bearish fair
- 8:28value gaps. So, you can see that we are
- 8:30still trending towards lower lows and
- 8:32we're in a market maker sell model. So,
- 8:35understanding this and understanding
- 8:37that we want to continue to take out
- 8:40price lower. We want to set a condition
- 8:42now of a disrespect versus respecting
- 8:45fair value gap. So, going onto the
- 8:4730-minute chart, you can see that we
- 8:49have an unfilled fair value gap right
- 8:51here that we can use as our if this then
- 8:54that scenario. So, as you can see price
- 8:57is also reacting out of this 30-minute
- 8:59fair value gap. So, if we were to assume
- 9:02if we were to trade inside of this
- 9:0430-minute fair value gap and respect it,
- 9:07we can then continue that idea that this
- 9:11is high resistance and we will continue
- 9:13the trend lower towards this sell-side
- 9:16liquidity to complete that market maker
- 9:18sell model. So, if we play out price,
- 9:21you can see that we trade into this
- 9:2330-minute fair value gap, but we respect
- 9:26the CE point right here of the midpoint
- 9:29of the gap. Now, scaling down to the
- 9:325-minute time frame, you can see that
- 9:34we're trading away from this fair value
- 9:36gap and if we mark out the low time
- 9:39frame imbalances, you can see that we're
- 9:41holding these bearish fair value gaps
- 9:43and sending price lower, right? Which is
- 9:46what you want to see if you want to
- 9:48continue that market maker sell model.
- 9:50And if we continue to play out price,
- 9:53you can see that we respect that
- 9:55scenario of that high time frame fair
- 9:57value gap, of that 30-minute condition.
- 10:00Not only that, we target that low time
- 10:02frame low resistance liquidity and
- 10:05continue the trend lower. So, using the
- 10:08framework of that disrespect versus
- 10:10respecting fair value gap, we can then
- 10:12find an entry where we respect these
- 10:15bearish PD arrays and we continue to
- 10:18flush lower towards this low resistance
- 10:20liquidity. So, now moving on to arguably
- 10:23the most important concept in trading,
- 10:25and that is understanding premium versus
- 10:28discount levels, because identifying the
- 10:30draw on liquidity isn't always going to
- 10:32be easy every single day, especially if
- 10:35we aren't a low resistance versus high
- 10:37resistance scenario. Premium versus
- 10:40discount can be especially used when the
- 10:42range high and the range low are both
- 10:45high resistance. What do I mean by this,
- 10:47right? Well, if the range high and the
- 10:49range low both sweep liquidity and react
- 10:52out of a high time frame PD array, then
- 10:55you have to identify what premium versus
- 10:57discount is and using what we learned
- 11:00from disrespecting versus respecting
- 11:02fair value gaps. So, in a premium, what
- 11:05you want to see is for bearish fair
- 11:07value gaps to be held. In a discount,
- 11:09you want to see bullish fair value gaps
- 11:11to be held. So, if we want to continue a
- 11:14market maker sell model and continue to
- 11:17target the range low, what you want to
- 11:19see is for us to complete this market
- 11:21maker sell model, for us to react out of
- 11:24this bearish premium fair value gap and
- 11:26respect it, as well as disrespect this
- 11:29bullish fair value gap in a discount,
- 11:32where we can confirm that we will take
- 11:34the range low and vice versa if we were
- 11:37to continue bullish. What you want to
- 11:39see is for us to react out of this
- 11:41bullish fair value gap in a discount and
- 11:44then disrespect this bearish fair value
- 11:46gap in a premium to then take a trade
- 11:49where we target the range high. I also
- 11:51want to note that when you take an entry
- 11:53where you trade inside of equilibrium
- 11:56and then catch a reversal trade, this is
- 11:58the most high probable trade you can
- 12:00take because you're trading into the
- 12:02most optimal point where you should take
- 12:04your entry, that being equilibrium and
- 12:07especially if we have low resistance
- 12:09built up on the opposite side. So now
- 12:12moving on to our next chart example,
- 12:14we're going to apply everything we have
- 12:16learned so far with premium versus
- 12:18discount levels. So as you can see on
- 12:21both sides of the market, we sweep out
- 12:23significant buy side and sell side
- 12:25liquidity while also reacting out of a
- 12:281-hour fair value gap. So you can assume
- 12:30now the range high and the range low are
- 12:33both high resistance and we're operating
- 12:35in HR versus HR conditions. So when we
- 12:39are in high resistant conditions, what
- 12:41you want to do is mark out the range low
- 12:43and the range high in order to identify
- 12:45what premium and discount levels are
- 12:48shown in the market and which gaps are
- 12:50being disrespected versus respected. So
- 12:53now going on to the 15-minute chart, we
- 12:55want to set our if-this-then-that
- 12:58with knowing our premium and discount
- 13:00levels. You can see that we do have a
- 13:0215-minute bearish fair value gap right
- 13:04here and if I play out price further, we
- 13:07do generate a bullish fair value gap
- 13:09that we can use for our
- 13:11if-this-then-that scenario. So if we
- 13:14were to remain bearish, what you want to
- 13:16see is for us to respect this premium
- 13:19bearish fair value gap for us to
- 13:22disrespect this discounted bullish fair
- 13:24value gap to then confirm the range low.
- 13:27If we were to remain bullish, what you
- 13:29want to see is for us to react out of
- 13:31this discounted bullish fair value gap
- 13:34to then disrespect this bearish premium
- 13:37fair value gap to then confirm the range
- 13:39high. So, these are the two scenarios
- 13:42that we can set with our premium versus
- 13:44discount conditions. And just playing
- 13:47out price, you can see that the price
- 13:49runs up, we respect this premium fair
- 13:52value gap, but disrespect the bullish
- 13:54fair value gap. So, seeing this, we can
- 13:57confirm that the market wants to go to
- 13:59the range low and we're actively being
- 14:01able to take out high resistance
- 14:03liquidity. So, if we play out price, we
- 14:06eventually take out that low, but also
- 14:09going on to the 1-minute chart, you can
- 14:11see on the low time frame, we are
- 14:13respecting premium fair value gaps as
- 14:16well on the low time frame, while also
- 14:18generating low resistance liquidity to
- 14:21the sell-side and the range low in order
- 14:24to confirm that trade. So, now moving on
- 14:27to our final concept, we want to
- 14:29identify our low time frame confirmation
- 14:31entries, that being an inversion or a
- 14:33change in state of delivery in order to
- 14:36catch a trade towards the identified
- 14:38draw on liquidity for the day. So,
- 14:40looking at the left-hand side, we are in
- 14:42a market maker buy model. You want to
- 14:45identify a bullish high time frame
- 14:47condition, that being a 15-minute fair
- 14:49value gap or above. You want to see us
- 14:51immediately displace out of this gap to
- 14:54then get our low time frame confirmation
- 14:56entry of an inversion to then target the
- 14:59draw on liquidity above and taking a
- 15:01continuation trade. You can also notice
- 15:03that we have low resistance liquidity
- 15:05being built up towards this draw on
- 15:07liquidity on the left-hand side of the
- 15:09curve. You want to identify a bearish
- 15:11high time frame condition in a market
- 15:13maker sell model for us to displace out
- 15:16of it and getting a low time frame
- 15:18inversion to then target the low
- 15:20resistance liquidity that is being built
- 15:22up towards that drawn liquidity. Now,
- 15:25going on to our final chart example,
- 15:26we're going to apply everything we have
- 15:28learned in order to catch an intraday
- 15:31trade towards that drawn liquidity. So,
- 15:33looking at the daily chart, we have been
- 15:35expanding higher and then the market
- 15:37fails to distribute higher and we
- 15:39consolidate and get a deeper retracement
- 15:42in the current price leg. You can see
- 15:43that we expand higher and now we're
- 15:46given the opportunity of being in a high
- 15:48time frame market maker buy model where
- 15:51we are given the opportunity to take out
- 15:53all of these failure swing highs. In the
- 15:55current price action, you can also see
- 15:57we do have a volume imbalance that we
- 16:00can use in our trade. This is really
- 16:02strong because price tends to trend
- 16:04towards this volume imbalance. You can
- 16:06also see that we have a daily high. So,
- 16:09these are the two draws on liquidity I
- 16:11want to see going into the day. Scaling
- 16:13down to the 30-minute chart in order to
- 16:16identify our if this then that
- 16:18statement, you can see that we do have a
- 16:2030-minute fair value gap right here that
- 16:22price is currently reacting off of and
- 16:25you can see that we do sweep liquidity
- 16:27in a high time frame. So, you can assume
- 16:29that this low that was being put in is
- 16:31now currently high resistance. So, now
- 16:34scaling down to the low time frame, we
- 16:36want to find our confirmation entry in
- 16:38order to take a trade towards our
- 16:40identified drawn liquidities above. You
- 16:43can see that this low is now high
- 16:44resistance because we sweep out
- 16:46sell-side liquidity as well as reacting
- 16:48out of this 30-minute high time frame
- 16:50fair value gap. Looking for our low time
- 16:52frame confirmation, we do have a change
- 16:55in state of delivery as well as a
- 16:571-minute inversion right here. So,
- 16:59taking this trade towards our identified
- 17:01drawn liquidities above, I'm extremely
- 17:04confident that this will play out based
- 17:06on what I know about disrespecting
- 17:08versus respecting high resistance versus
- 17:10low resistance and identifying our drawn
- 17:12liquidity above. So, just playing out
- 17:15price, you can see that we do deliver
- 17:17and eventually take out that objective.
- 17:19And yeah, I hope you guys enjoyed
- 17:21watching this video. This covers
- 17:22completely how to find your drawn
- 17:24liquidity going into every single day.
- 17:27And yeah, if you guys haven't already or
- 17:28need help regarding trading questions,
- 17:30feel free to join my completely free
- 17:32Discord server. It'll be linked at the
- 17:34bottom of the description. And I also go
- 17:37over my daily recaps as well as do
- 17:39weekly giveaways in there. So yeah, I
- 17:41appreciate you guys so much for the
- 17:43support. Like, comment, sub, and I'll
- 17:44see you guys in the next video.
About this transcript
This page contains the full transcript of How To EASILY Find The Draw On Liquidity (DOL) | ICT Concepts by tokennq, generated from the public captions YouTube serves with the video. The transcript has 3,188 words across 452 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.