How To CORRECTLY Go Breakeven (FULL GUIDE) — Transcript
Full transcript
- 0:00Yo, how's it going everyone? Welcome
- 0:02back to another video. In today's video,
- 0:04we're going to cover how to properly go
- 0:06break even in your trades, how to
- 0:08actually be informed based on high
- 0:10resistance liquidity pools against you,
- 0:13and how to actually use break evens as a
- 0:15tool to give you a profitable edge in
- 0:17the market. I know break evens are a
- 0:19difficult topic, especially if you are
- 0:21unaware about how to be informed about
- 0:24utilizing them. So, the main common
- 0:26misconception with break evens is you're
- 0:29using it because you're scared of
- 0:30losing, or that you're scared of
- 0:32drawdown. Break evens are actually meant
- 0:35to remove risk, they're meant to secure
- 0:37a winning trade, and it's a tool to
- 0:39guarantee profits. So, the easiest way
- 0:42to determine if you actually correctly
- 0:44went break even, and something that you
- 0:46can note in your journal, is if a break
- 0:48even results in a loss. This is a good
- 0:51thing. If a break even results in a win,
- 0:54this is a bad thing. So, an example of
- 0:56this, right? We're going to draw it on
- 0:57the charts. Let's say we're taking a
- 0:59long like this, and then we had to go
- 1:01break even. If you actually see us go
- 1:04BE, and then we get stopped out right
- 1:06here, this is a good thing, right?
- 1:08Because you avoided a loss. By going
- 1:11break even, you actually did an informed
- 1:13thing, you did the right thing, which
- 1:15gives you a profitable edge in the
- 1:17markets because you're actually aware
- 1:19when to go break even and when to
- 1:21protect yourself in a trade. A bad break
- 1:24even is if you're taking a long like
- 1:25this, you get break even by like a wick
- 1:28or a tick, and then we instantly run to
- 1:31your TP. This is most likely assuming
- 1:33that you are going break even
- 1:35incorrectly, and we're going to cover
- 1:37the two biggest reasons why people fail
- 1:40to actually use break evens correctly,
- 1:42and we're going to cover a bunch of
- 1:43scenarios on top of that with trade
- 1:46examples as well. Now, going into what
- 1:48makes break evens incorrect, there are
- 1:51two main categories that this falls
- 1:53under. It's either going to be emotional
- 1:55or mechanical break evens. We're going
- 1:57to first cover emotional break-evens.
- 1:59Now, typically this happens when you
- 2:01manually close a position because of
- 2:04fear in the market and because you're
- 2:06afraid that you're going to lose
- 2:08profits, afraid of losing profits. This
- 2:11is the most the biggest killer in your
- 2:13progression as a trader and to give you
- 2:16a profitable edge, right? Because I
- 2:18teach and a lot of you guys watching me
- 2:20trade one to one, trade one to two,
- 2:22trading PO3, you're cutting yourself
- 2:24loose when you actually close your
- 2:26position early because now you're
- 2:28trading negative RR and you're not
- 2:30capitalizing off of your actual RR that
- 2:33you would have gained out on a
- 2:35profitable edge. So, manually closing
- 2:37your position is one of the worst things
- 2:39to do and typically this happens when
- 2:41price is fluctuating. So, when a lot of
- 2:44people see price is fluctuating or
- 2:46consolidating as soon as they enter
- 2:48their trade, this is when a lot of
- 2:50people close it out because they don't
- 2:52think we're actually going to run to
- 2:53their TP. I want you to understand this,
- 2:56right? When you apply all of these
- 2:58confluences, when you're entering with
- 3:00confidence, when you're entering based
- 3:02on your discretion and what you know
- 3:04from your trading system, whatever price
- 3:07does afterwards, that has nothing to do
- 3:09with you, right? I other than that,
- 3:11other than being an informed break-even,
- 3:13you should not emotionally go break-even
- 3:15because your trade you cannot predict
- 3:17every single candle what happens from
- 3:19your entry to your TP. Anything can
- 3:22happen, right? So, the biggest thing and
- 3:24the biggest killer is to close your
- 3:26position emotionally and then seeing it
- 3:28run, right? Now, going into the second
- 3:30category of incorrect break-evens, this
- 3:33is going to be mechanical break-evens.
- 3:35And when do I not want you guys to do
- 3:37this? This is going to be going
- 3:38break-even at random unfilled 5-minute
- 3:42gaps.
- 3:44Don't do this. And going break-even at
- 3:47any intermediate high and intermediate
- 3:49low. So, these are the two main killers
- 3:52of going mechanical break even. And I'm
- 3:54going to going to show you trade
- 3:55examples why. But, as an example, right?
- 3:58Let's use this as an example. If we
- 4:00randomly go break even at any unfilled
- 4:035-minute gap, you have to understand
- 4:05when you enter a trade, nine times out
- 4:08of 10 your low, if we're taking a long,
- 4:10is more high resistance than any
- 4:13unfilled 5-minute gap right here. So, if
- 4:16we're taking a trade, right? And we tap
- 4:17into a unfilled 5-minute gap, sure we
- 4:20may consolidate, sure we may enter some
- 4:22drawdown, but you have to understand
- 4:25that your low is more protected than
- 4:27that unfilled 5-minute gap. So, nine
- 4:29times out of 10 we will beat this
- 4:315-minute gap. So, going break even when
- 4:34you see any unfilled five is the most
- 4:37incorrect way of thinking. This is the
- 4:39biggest common misconception to trading
- 4:41IFV's, to trading PO3. And the second
- 4:45thing is just going break even as soon
- 4:47as we take out any single intermediate
- 4:48high and intermediate low. And we're
- 4:51going to go actually into specific
- 4:53examples when this actually can harm
- 4:55your trading. But, these are the two
- 4:57main ways that people incorrectly go
- 4:59break even. Now, going on to correct and
- 5:02informed break evens, I want you guys to
- 5:04start understanding break evens as a
- 5:07part of trading. When you are taking
- 5:09entries, when you are trading, you're
- 5:10not mechanical, you're not emotional,
- 5:13and this also applies when you're being
- 5:15informed, and when you're actually
- 5:17properly going break even. So, what do
- 5:19you have to do? You have to outweigh the
- 5:21pros versus cons in your trade and
- 5:23understanding risk. Break evens are
- 5:26meant to secure winning trades. They're
- 5:28meant to remove risk and guarantee
- 5:30profits. And the main ways and the three
- 5:33things I look for in order to make an
- 5:35informed decision is if there's a high
- 5:37time frame gap against your trade. So,
- 5:40if this is a 15-minute gap or above
- 5:42during your trade, then I will also go
- 5:44break even. So, let's say we're taking a
- 5:46long on NQ and then price taps into a
- 5:4915-minute gap right here. We are then
- 5:52forced to go break even because our
- 5:54protected low and that high-time frame
- 5:56gap is equally high resistance. The
- 5:59second thing I identify is if the major
- 6:01GL is taken on the opposing correlated
- 6:06asset. Now, what do I mean by that,
- 6:08right? So, let's say we're taking an
- 6:10entry on NQ and by using a correlated
- 6:13asset such as ES, if I see ES taking a
- 6:16major draw on liquidity or a major
- 6:19intermediate high, that being a
- 6:2015-minute or above, and if we see ES
- 6:23taking it before NQ, then I will have to
- 6:26go break even because NQ can potentially
- 6:29reverse off of that, right? If you see
- 6:31us starting to slow down, if you see us
- 6:33reversing the low-time frame structure,
- 6:36then I will make an informed decision of
- 6:38going break even. And finally is if a
- 6:41high-time frame gap opens at our stop
- 6:43loss. So, if we're during in our trade,
- 6:46usually if we start chopping, we may
- 6:48open a new 15-minute gap and we could
- 6:51potentially get re-swept before price
- 6:54actually delivers. So, identifying PO3,
- 6:57identifying the 15-minute candle, and if
- 7:00we actually see a new high-time frame
- 7:02gap open, this is when I'll go break
- 7:04even and this is how you should properly
- 7:06outweigh the pros versus cons, right?
- 7:08Notice in this list, all of this is high
- 7:11resistance. High resistance opening
- 7:13below, high resistance during my trade,
- 7:16high resistance getting taken out and
- 7:18potentially reversed. So, that's how I
- 7:20manually and correctly go break even.
- 7:22Now, we're going to hop into some trade
- 7:24examples so I can showcase to you guys
- 7:26when to correctly go break even and when
- 7:29to not. Now, going into our first trade
- 7:32example, we're going to look at a
- 7:33reversal scenario that happens at 10:00
- 7:36a.m. This is essentially a mechanical
- 7:38model. So, this is a completely valid
- 7:41trade to take. You can see that we
- 7:43displace higher. We now have sell side
- 7:45as well as low resistance sell side
- 7:47liquidity at the leg. We then get our
- 7:50entry trigger right here. So, you're
- 7:52entering off this inversion treating
- 7:54this as an inversion for a fair value
- 7:56gap and holding for a one to one RR.
- 7:59Now, let's hop onto the 15-minute time
- 8:02frame and you can see with this wick, we
- 8:04actually sweep out an internal high
- 8:06right here and we're manipulating out of
- 8:09a 15-minute for fair value gap. So,
- 8:11understanding that, our stop loss is
- 8:13currently high resistance and we just
- 8:16had an internal sweep of the high which
- 8:18makes this high way more protected,
- 8:20right? So, understanding that this is
- 8:23high resistance, this high right here,
- 8:26let's hop onto the 5-minute chart. You
- 8:28can see that we have a 5-minute gap
- 8:30right here. I'm going to mark it out
- 8:32first. You guys can see we have a
- 8:335-minute fair value gap. But, why would
- 8:36you not go break even here? The reason
- 8:39being is because this high resistant
- 8:41high is way stronger than this 5-minute
- 8:44gap and this is because we just had an
- 8:46internal sweep. We just reacted out of a
- 8:4915-minute gap. So, understanding this,
- 8:52right? The 5-minute gap loses to the
- 8:555-15-minute gap that we're actually
- 8:57trading out of. So, understanding time
- 9:00frames, understanding high resistance,
- 9:02we should not go break even right here.
- 9:04See, when we actually react out of this
- 9:065-minute gap and you go break even, you
- 9:09will actually get stopped out of your
- 9:10trade. You'll get a break even. Then, if
- 9:13we continue to play out price, you can
- 9:14see we run lower and displacing. So,
- 9:17this break even results in a win, which
- 9:20is also not a good thing. Now, on the
- 9:23low time frame, I want you guys to
- 9:25actually look at price, right? Looking
- 9:27at these PD arrays, you have a fair
- 9:29value gap right here. We also have an
- 9:32order block right here. We also generate
- 9:35a bearish low time frame fair a rally
- 9:37gap right here. So, throughout price
- 9:39action towards this 5-minute gap, we're
- 9:42generating defensive bearish PD arrays
- 9:45and defensive bullish PD arrays to
- 9:47support price and the idea that we are
- 9:50still continuing lower. And also,
- 9:52understanding, right? This is adding all
- 9:54the context together because that's how
- 9:57you want to actually utilize break
- 9:58evens. So, the easiest way to actually
- 10:00understand this is usually your stop
- 10:03loss is more protected, more high
- 10:05resistance, than that 5-minute gap that
- 10:08you're currently trading in. And you
- 10:10don't have to worry about being in
- 10:11consolidation, being in drawdown,
- 10:13because your stop loss is way more
- 10:15protected. Now, if we actually identify
- 10:17the pros versus cons in utilizing our
- 10:20break evens, this is how I want you guys
- 10:22to see it, right? Understand what you
- 10:24have going for you. You have a 15-minute
- 10:26gap that we're reacting out of. You have
- 10:29sell-side LRL. You can start making a
- 10:31list in your head and understanding that
- 10:33this 5-minute gap holds no meaning
- 10:36because the draw on liquidity is way
- 10:38more significant. If we hop also onto
- 10:40the high time frame during this trade,
- 10:43you guys can see that we're displacing
- 10:45currently on the 1-hour candle lower
- 10:47after sweeping out this external wick,
- 10:50and now we're displacing towards the
- 10:52sell-side. So, all of these confluences
- 10:54together, you're able to adjust and
- 10:56actually understand you do not need to
- 10:58go break even in every single trade that
- 11:00has a 5-minute gap. Now, going into how
- 11:03to correctly utilize break evens, we're
- 11:06going to jump into this example right
- 11:08here. So, let's say we're taking a short
- 11:10off of this inversion targeting the
- 11:12sell-side low resistance liquidity, but
- 11:14we just opened up a new freshly made
- 11:1715-minute gap. So, because we understand
- 11:20that this, although reacted out of a
- 11:22high time frame PD array, and that we
- 11:25are displacing lower, this 15-minute gap
- 11:28is a high time frame gap that can
- 11:30actually stop us out. Price can actually
- 11:32reverse and prevent us from actually
- 11:34taking this sell-side LRL. So, if we
- 11:37were to take our entry at the inversion
- 11:40and we actually reacted out of this
- 11:4215-minute gap, you would have to go
- 11:44break even right here because price
- 11:46could potentially reverse because now
- 11:49this is a high resistance versus high
- 11:51resistance scenario. So, you have to
- 11:53protect yourself because both sides of
- 11:55the markets are dealing with high
- 11:57resistance. Now, if we actually play out
- 12:00price, you guys can see that price will
- 12:02run up higher. This was a valid break
- 12:04even. You guys can see that we actually
- 12:06swept out these highs. We got stopped
- 12:09out. So, this break even resulted in a
- 12:11loss that was avoidable because we made
- 12:14the informed choice about understanding
- 12:16that this high resistance is as equal to
- 12:19this high resistance and that we had to
- 12:21go break even since it is preventing us
- 12:24from taking this sell-side low
- 12:25resistance liquidity.
- 12:27Now, going into our next trade example,
- 12:30but I wanted to show you guys a trade
- 12:31where we have to go break even when a
- 12:33major DOL is taken on our correlated
- 12:36asset. So, let's say we're taking a
- 12:38short on NQ and we're using ES as a
- 12:41confluence. This is really good because
- 12:42ES is currently bearish as well as NQ.
- 12:45Now, if we hop onto the 15-minute chart,
- 12:48both assets are targeting this
- 12:49intermediate low right here. So, we have
- 12:52to monitor when the ES asset actually
- 12:55takes out that major DOL before NQ. So,
- 12:59if we hop onto price action again and we
- 13:01continue to play out price, what do you
- 13:04guys see? You guys see that ES actually
- 13:06takes out that major draw first while NQ
- 13:10is still trailing to this major draw.
- 13:12Now, you have to use your discretion in
- 13:14order to know when to informally go
- 13:17break even. Personally for me, when I
- 13:19see the sell-side LRL get taken out, the
- 13:22major DOL get hit on the other asset, I
- 13:25will normally go break even because this
- 13:27removes risk and the potential of a
- 13:29reversal. And if we actually hop onto
- 13:31the 15-minute chart, we are leaving this
- 13:33intermediate low and we're actually
- 13:35creating an SMT. You can see right here.
- 13:38And then if I mark it on yes, this is a
- 13:40lower low now. So this causes a little
- 13:42risk. Um it still is based on
- 13:45conviction, but I would personally go
- 13:46break even in this context. So if we
- 13:49play out price, you guys can see that we
- 13:51actually reverse and we take out the DOL
- 13:55but not before ES becomes uncorrelated
- 13:58with NQ, which is something you don't
- 14:00want to participate in the markets. So
- 14:03this is regarding break evens.
- 14:06Break evens on major DOLs. So when you
- 14:09see a 15-minute or higher intermediate
- 14:12high or low get taken, especially if
- 14:14it's in a major gap, you guys want to be
- 14:16going break even or just ensuring that
- 14:19price is not reversing because in this
- 14:21case ES was reversing before actually
- 14:24going break even. I also wanted to cover
- 14:27how do you properly go break even when
- 14:29you're taking a continuation trade and
- 14:31not a trade using AMD and taking that
- 14:34first inversion. So let's go into a
- 14:36trade example right now. So let's say
- 14:38we're generating liquidity and then we
- 14:40manipulate high time frame and then get
- 14:43that displacement, right? Using the leg
- 14:45that we just created, mark out your
- 14:48equilibrium if that's the case. Let's
- 14:50say we have a 5-minute sponsored gap
- 14:52right here and we're taking a
- 14:54continuation trade off of this high time
- 14:56frame PD array. We sweep out high time
- 14:58frame liquidity. We react out of a high
- 15:00time frame gap. And now this low is
- 15:03protected for us to continue the bullish
- 15:06trend. So let's say we're taking a trade
- 15:08like this. What I would need for price
- 15:10to do before I actually go break even is
- 15:13if we close above the current leg. So if
- 15:16we actually close above here, then I
- 15:19will go break even. And let's say I'm
- 15:20taking a trade like this and I'm
- 15:22targeting that major DOL. The only time
- 15:26I will go break even is if we actually
- 15:28close above the current leg and take out
- 15:31all of this low resistance liquidity
- 15:33because now I know that my stop is
- 15:36protected. There's no reason to return
- 15:38back to this low because we already
- 15:40closed above price and now we're
- 15:43actually targeting the major DOL. And
- 15:45that's how you should start
- 15:46understanding break evens, right? Break
- 15:48evens are meant as a tool to remove
- 15:50risk. They're meant to secure a trade
- 15:52idea. Now that you solidified that we
- 15:55are leaving this low, we're leaving this
- 15:58liquidity, you can then justify the idea
- 16:00of going break even instead of just
- 16:02going break even off a random
- 16:04intermediate high in this price action.
- 16:07Going into a little sauce in this video,
- 16:09this is also how I go break even
- 16:12discretionally and more informed during
- 16:14my trade using the low time frame. So
- 16:16let's say we're taking an inversion and
- 16:18we're targeting this major DOL. In this
- 16:21current price leg, I will go break even
- 16:23at the last inversion that actually
- 16:25prevents us from getting to the major
- 16:27DOL. So in this case, this is a 1-minute
- 16:30gap. I will wait for a closure above
- 16:33this gap and then go break even, right?
- 16:35This is because I'm removing the risk.
- 16:37I'm also guaranteeing the fact that
- 16:39we're going from bearish to now bullish
- 16:42order flow because we're continuing to
- 16:44disrespect these bearish gaps and it is
- 16:47confirmed at the last gap before the
- 16:49major DOL or before that sell-side or
- 16:52buy-side low resistance liquidity. Now I
- 16:55also want you guys to take note. If you
- 16:56want to trail or if you want to start
- 16:58learning how to actually trail your
- 17:00trades, start understanding the overlap
- 17:03of defensive PD arrays. You guys can see
- 17:05we have a fair value gap right here, an
- 17:07inversion right here, a order block
- 17:09right here. We also have another
- 17:11inversion right here. We have another
- 17:13bearish fair value gap right here. We
- 17:15have another fair value gap right here.
- 17:18And now look, right? There's so much
- 17:20overlap in price that you can
- 17:22understand, you can start trailing to
- 17:23this low, you can start trailing to this
- 17:25low, or this low, this body based on the
- 17:29overlap of defensive low time frame PD
- 17:31arrays that actually displace you higher
- 17:34in price. Now, that's how I properly go
- 17:36to for trailing. That's how I
- 17:37discretionally go break evens based on
- 17:40that 1-minute gap, based on overlapping
- 17:42low time frame gaps as well. So, I hope
- 17:45you guys enjoyed this video. Appreciate
- 17:47you guys so much. This was a long time
- 17:49in the making. So, if you did like this
- 17:50video, like, comment, sub. If you do buy
- 17:52props, use code token. Love you guys.
- 17:55I'll see you guys in the next video.
About this transcript
This page contains the full transcript of How To CORRECTLY Go Breakeven (FULL GUIDE) by tokennq, generated from the public captions YouTube serves with the video. The transcript has 3,244 words across 464 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.