HOW TO ALIGN YOUR GRINDER: Shim Alignment Tutorial — Transcript
Full transcript
- 0:00What's up everyone? Lance Hedrickk here.
- 0:02Today I'm going to tell you how you can
- 0:05align your Flatbird grinder.
- 0:08Boom.
- 0:11[Music]
- 0:15So, today, like I said, we're going to
- 0:17look at aligning grinders with just a
- 0:19few simple tools. Pair of scissors, Expo
- 0:22marker, permanent marker, Phillips head
- 0:25screwdriver, and some aluminum foil. and
- 0:28obviously your grinder. Now, before we
- 0:30continue, I would like to ask if you've
- 0:32been enjoying my videos, if you're going
- 0:33to use this video, please consider
- 0:35liking and subscribing. Uh there's still
- 0:37the hefty majority of you that watch my
- 0:38videos are not subscribed, not a huge
- 0:40deal, you know, just click that button.
- 0:42If it's not a big deal for you, I would
- 0:43really appreciate it. Uh anyway, let's
- 0:45continue with this video. Um this is
- 0:47going to really help you elevate your
- 0:48coffee game at home. And thanks. So, one
- 0:51of the biggest things that people
- 0:52neglect to do when they get flat
- 0:54grinders is to align them. Most
- 0:57companies, unless you're buying the
- 0:59really expensive in-game style grinders,
- 1:01are not going to come aligned. In fact,
- 1:03there are varying tolerances that
- 1:05manufacturers have built in their
- 1:07grinders. So, that means that some of
- 1:09them will have tighter tolerances, which
- 1:11means from the bur carrier to the
- 1:12chamber to the augur, etc., all have
- 1:15certain distances that they are created
- 1:16to be from each other. Obviously, the
- 1:18less tolerance, the more difficult it
- 1:19is. So, the cheaper the machine likely,
- 1:21the bigger the tolerances. But there is
- 1:24a way that you can tighten your
- 1:27alignment. Now, what do I mean by
- 1:28alignment? Let's go ahead and get into
- 1:29that. Actually, first things first, what
- 1:31do I mean by flat burr? Some of you
- 1:33watching this pro may not even know that
- 1:35distinguishing bit. So, I want to ensure
- 1:37you do. When I say flat burr, I mean
- 1:39literally that a burr set that is flat.
- 1:43Okay. Now, there are if you have like a
- 1:45Bratza Encore or a Sete or if you've
- 1:47seen the Niche grinder or things like
- 1:48that, those are what are called conicle
- 1:50burr grinders. So you have like a cone
- 1:52burr and then you have a kind of a
- 1:55collar that rotates around it. So that's
- 1:56called a conicle burr. These however are
- 1:59flat burrs. Okay. So I don't really know
- 2:02of a way to align conicle burrs but for
- 2:05flat birds I'm going to show you how to
- 2:06do this today. So before continuing I do
- 2:09want to explain two different styles of
- 2:11misalignment. One of them is co-planer
- 2:14and that is this. So what you want are
- 2:16two parallel burrs. co-planer would mean
- 2:19that one is slightly a skew like so.
- 2:23Okay. The other would be if it's off
- 2:25radially. So that means they should be
- 2:27lined up perfectly. That means whoop
- 2:29it's off like this. Now obviously these
- 2:31are huge. I'm showing you like massive
- 2:33things. They're never that big. It's
- 2:34normally just like you can't even see it
- 2:36with your eye really. So there are two
- 2:38essentially two main ways of
- 2:39misalignment for for the radial. You
- 2:42know what a lot of people try to do is
- 2:43feel with their hand as they're putting
- 2:45the burrs back in. you know, just trying
- 2:47to make sure that they're lined up from
- 2:48side to side. We're not going to really
- 2:49get into that in this one. We're going
- 2:51to talk about co-planer misalignment,
- 2:52which is those alignments, misalignments
- 2:54that are like this. Now, obviously,
- 2:56what's the issue with that? Well, think
- 2:58about it. As we're grinding coffee, we
- 3:00think we're at this grind size, right?
- 3:03But really, we're at this grind size.
- 3:05So, where that hinge is in the middle,
- 3:07we're here instead of here. So, what's
- 3:08going to happen is grounds coming out of
- 3:10one side of those that bur set are going
- 3:12to be bigger. Burs out grounds out of
- 3:14the other are going to be smaller.
- 3:15you're going to produce a lot more
- 3:16fines. You're going to produce a lot
- 3:17more boulders. You're going to have a
- 3:18much more uneven particle distribution.
- 3:21So, our idea here, what I'm going to
- 3:24show you today is what's called a shim
- 3:25alignment. We're going to use aluminum
- 3:27foil. We're going to shim behind the
- 3:29burrs in order to make them more
- 3:32aligned. So, take that crazy
- 3:34misalignment and make it more like so.
- 3:36So, essentially what we're going to do
- 3:38and all and a lot of these flat burr
- 3:39grinders that are vertically mounted,
- 3:40they're going to look something like
- 3:41this. Obviously, not with thumb screws.
- 3:44I brought this one because it's easier
- 3:45to take apart. But I'm taking out these
- 3:48screws on the side. Then behind it,
- 3:51we've got the burr carrier. So, I take
- 3:53that out. Oops, there's no burr cuz I've
- 3:55already taken them out. So, we have the
- 3:56burr carrier. Then, you have the spring
- 3:58around the augur, which is what gives us
- 4:00the tension to change our grind size.
- 4:02And then you have the back bur, which is
- 4:04normally on this plate right here. Okay.
- 4:06So, we have the augur here, which is the
- 4:08thing that spins. In fact, I can show
- 4:10you. This is dangerous.
- 4:12There's like no safety on these uh
- 4:14grinders. So, I can show you how that
- 4:16that augur spins. So, just for people
- 4:18who don't know what's going on, that
- 4:20burr will sit back here and then when
- 4:23you turn the augur to spin it, it's
- 4:25connected to this burr and that's how
- 4:26you're making your ground coffee. It
- 4:28drops straight down. Now, there are
- 4:29obviously grinders like the Bratzavario
- 4:31that are horizontally set. Same process
- 4:34on shimming. We're just going to shove
- 4:35aluminum foil behind uh and and go go
- 4:39for it like that. Now, the way I like to
- 4:40do it is obviously you want to be safe.
- 4:42So, the first thing we're going to do is
- 4:44unplug our grinder. All right,
- 4:46unplugged. Now, what I like to do is
- 4:49take it, put it on its back. All right,
- 4:52so now what we're going to do is we're
- 4:54going to take we're going to do the
- 4:55initial marker test. Okay, this is how
- 4:57we're going to see how aligned or
- 4:58misaligned our grinder is. So, I'm going
- 5:00to I'm going to tap these together and
- 5:02uh it's going to be all reassembled. And
- 5:06and now we have the burrs reinstalled.
- 5:08Now, what I'm going to do is I'm going
- 5:09to take my trusty Expo marker. Retake.
- 5:13Okay, one more time. I promise I'm good
- 5:16at catching stuff. I'm going take my
- 5:17trusty Expo marker. And then here's what
- 5:18I'm going to do. On the edge of these
- 5:20burrs, what you're going to see is a
- 5:22flat edge at the very tip. So, when you
- 5:24saw me put them together, they were
- 5:26sandwiched together to where you
- 5:27couldn't see anything. This is a flat
- 5:29edge. So, what I'm going to do is I'm
- 5:31going take my Expo marker and just on
- 5:33the outer burr carrier, we're going to
- 5:34do one at a time. on just this outer bur
- 5:36carrier. I'm going to take my marker.
- 5:41I'm just going to
- 5:44draw on the flat edge.
- 5:47Okay.
- 5:49Now, why am I doing this? The reason I'm
- 5:52doing this, the reason I'm drawing on
- 5:54this flat edge is because that flat edge
- 5:56is going to touch the flat edge of the
- 5:58other burr. Okay? So, what I'm going to
- 6:00test is where it's touching this burr.
- 6:04So whenever it's down, if it were
- 6:06completely flush, right when I touched
- 6:08the burrs at the zero point, right when
- 6:10I touched, all of the markers should be
- 6:12wiped off if they were perfectly
- 6:13aligned. But what's going to happen is
- 6:15likely this burr is just slightly a skew
- 6:17this bur itself. Okay? Because the burr
- 6:19carrier is probably just a little off.
- 6:21And so if that's the case, what's going
- 6:23to happen is maybe one side will be
- 6:25wiped off or one segment will be wiped
- 6:26off. And then the what we're going to do
- 6:28in order to make sure that it's aligned
- 6:30is we're going to take a little bit of
- 6:32aluminum foil and we're gonna poke it
- 6:34behind the burr wherever the uh marker
- 6:37has not been wiped off. Okay. So, we're
- 6:39taking that, put the marker around it,
- 6:42and we're going to do our first marker
- 6:43test. Okay. So, I'm just going to
- 6:45replace it. Make sure you have your
- 6:46spring in there. I almost forgot. Make
- 6:48sure you have your spring. That's very
- 6:49important, obviously. Then, you're going
- 6:51to push that in. We're going to replace
- 6:53everything.
- 6:56All right. So, now we're going to do the
- 6:58test. Make sure you're not at zero to
- 7:00start. Then we're going to turn it on.
- 7:03All right. And I'm going to slowly go
- 7:04down till the burrs start to chirp. You
- 7:07ready? Let's listen for it.
- 7:14Uh-oh.
- 7:16There it is.
- 7:18You hear that? You could tell how
- 7:20misaligned that was. You could hear it
- 7:22going.
- 7:24The chirping was way off, meaning these
- 7:27burrs are hella misaligned. Okay, so I'm
- 7:30going to unplug it again and then we're
- 7:32going to take this back apart and we're
- 7:33going to check where that marking that
- 7:34stripe is. And we're back. All right, so
- 7:37let's take a look at this and look real
- 7:39close. Can you see that dry erase? Okay,
- 7:42so you see right where' it go? Right
- 7:45here, it's wiped off. You see that? Just
- 7:49this section though, all of this still
- 7:52has its dry erase marker. See that? So,
- 7:55this is pretty horribly misaligned. That
- 7:57means just this part touched. Which
- 7:59means if we had it like so, if we had it
- 8:02like this, this is the part that
- 8:03touched. That means this burr carrier
- 8:05has it just tilted like so. So, as it's
- 8:07spinning, this is the only side that's
- 8:09hitting. Okay? So, as it's spinning,
- 8:13zoop z. So, as you see, this side is
- 8:16wiped off, which means as it was down
- 8:18here, the bird hair was just off. And
- 8:20so, it's kind of following that same
- 8:22path. So, this is the only part that is
- 8:24hitting. So, what we need to do in order
- 8:26to compensate is we need to shove some
- 8:28shims right underneath the burr carrier.
- 8:30Now, why aluminum foil? Well, because
- 8:32aluminum foil, this is going to be
- 8:34shocking to you, but it's the most
- 8:35consistent household thing you can find
- 8:38as far as the thickness. I believe it's
- 8:39I'll probably be I'm probably wrong
- 8:41here, but it's I believe it's six
- 8:42microns thick. um six microns thick. So
- 8:46um yeah. So what we're gonna do is we're
- 8:48gonna take just a piece of aluminum
- 8:49foil. I you don't have to go this big.
- 8:51In fact, I'm not going to. I'm gonna
- 8:52just cut a little bit off. I'm gonna
- 8:53take off some aluminum foil.
- 8:56This what I'm going to do.
- 9:00I'm going to cut here.
- 9:02I'm going to make a little piece like
- 9:03so. I'm going to make a couple of pieces
- 9:05like this. So I'm going to just cut cut.
- 9:11So, as you see what I'm doing, I'll show
- 9:12you the size in a second. I'm just
- 9:14making myself a lot of little shims.
- 9:16Okay, so I'm making my shims this size.
- 9:21Okay, that way I can fold it in two. And
- 9:24now I've got 12 microns thick. Okay, and
- 9:28there we have just a simple little shim.
- 9:30Now that we got those shims ready, take
- 9:32a permanent marker. Okay, take the lid
- 9:34off. Now, what I'm going to do is just
- 9:36to be sure we always know how to get
- 9:38back to where we were is I'm going to
- 9:39mark on the burr and the burr carrier so
- 9:42I know where to always align it. Okay,
- 9:44this is where it's always going to be.
- 9:46So, whenever I make shims and I take
- 9:47things apart, I know how to put it back
- 9:49on because also the burr could be off.
- 9:50Anything could be off. So, what we want
- 9:52to do is since we're uh aligning based
- 9:55off of this format, we're going to use a
- 9:59permanent marker to ensure we know how
- 10:00to get back to where we're going. Then
- 10:02what else you can what you can also do
- 10:03is wherever it's wiped off, you can mark
- 10:06the opposite side to help you know where
- 10:07to shim. I'm I I'm going to keep it with
- 10:09the markings on there and I'm going to
- 10:12just barely lift this up. So I'm going
- 10:14to just barely unscrew it.
- 10:17Barely unscrew.
- 10:19I'm going to do is on the opposite side,
- 10:20I'm going to lift up this burr and I'm
- 10:22going to take two shims. Since it was
- 10:24such a small spot that was hit, I'm
- 10:26going to do it here.
- 10:30I'll show you here in a second. I'll
- 10:31point to where I did it and why. I'm
- 10:33going take another shim and I'm going to
- 10:34take this one and I'm going to shove it
- 10:36right there. Okay.
- 10:39So, now we've got shims on both sides.
- 10:40I'm going to push it back down. Hold it
- 10:42tight. And this is where I'm talking
- 10:44about radial alignment. You want to make
- 10:46sure you're feeling and squeezing the
- 10:47sides to make sure that the burr is up
- 10:50against the burr carrier as evenly as
- 10:52possible on all sides. So, if you feel
- 10:54this side is is sloping over more, make
- 10:57sure you pop it back with a screwdriver
- 10:58or something once it's getting tight.
- 10:59You want to make sure that all sides are
- 11:01as equal as possible. Now, what you're
- 11:03going to do, or what I did is, so here's
- 11:06where the marker rubbed off. So, I put a
- 11:09shim here and a shim here to lift up
- 11:12this whole side. So, hopefully we can
- 11:14get a full wipe on our next attempt.
- 11:16Okay. So, now what I'm going to do is
- 11:18I'm going to wipe all this marker off.
- 11:19I'm going to redraw a circle and we're
- 11:20going to do the marker test again. All
- 11:22right. So, we've got it up. I plugged it
- 11:24back in cuz remember, keep it unplugged
- 11:25whenever you're playing inside of it.
- 11:27And I'm going to click it on. All right.
- 11:29Now, let's make it touch.
- 11:31All right, we're going to go until it
- 11:32just barely touches. So, listen for it.
- 11:35There it went. Okay, you just want to
- 11:37barely touch. If you if you go hard past
- 11:39touch point, it's going to wipe
- 11:40everything off. You're going to have a
- 11:41false wipe. So, you want to make sure
- 11:44that you just barely touch those burrs
- 11:46for just a second. Especially on
- 11:47something that spins around 2,2500 RPM,
- 11:50you just barely let it touch. Okay? If
- 11:51you go too tight or you let it spin too
- 11:53much, it can give you a false reading.
- 11:55So, unplug and check the wipe once more.
- 11:59And this never happens. My first try, I
- 12:03got it right. So, let's take a look at
- 12:04this.
- 12:06So, really, really nice. Really nice
- 12:08marking here.
- 12:10Can you see that pretty well? Oh, yeah.
- 12:13So, you see? Okay. So, there's a little
- 12:15marker on the front of this edges of
- 12:16this teeth here. But if you see the
- 12:19outside of it is wiped clean. Okay. So,
- 12:21it's just a little bit on the inside,
- 12:22but I'm calling that a full wipe. That's
- 12:24a freaking delicious wipe right there.
- 12:26I'm very happy with that. Um I'm sure
- 12:28memes will be made for me saying
- 12:30delicious wipe, but um that's a great
- 12:33wipe. Okay, so uh yeah, that's
- 12:36fantastic. I'm keeping that. I'm not
- 12:38going to move it. Uh now, now the next
- 12:40thing you would do, I'm not going to do
- 12:41it because you understand. But the next
- 12:43thing you would do is now that we have
- 12:44this one aligned and good to go, we
- 12:46would do it to the stationary burr as
- 12:48well. And we would figure out where the
- 12:50alignment is wrong there. and we'd start
- 12:51to throw shims in until you found where
- 12:53it was for a flint clean wipe on both
- 12:55burrs. This is um uh the easiest way to
- 12:58do it. It's also the most labor
- 13:00intensive because you have to that I
- 13:01mean, like I said, this is probably the
- 13:02first time that's ever worked first try.
- 13:04I'm very stoked about that. Um but yes,
- 13:08try this out. Let me know your results.
- 13:10You can do it on any flatburg grinder.
- 13:12Just shim it up. Good to go. Um yeah,
- 13:15try that out. Let me know how it goes in
- 13:17the comments below. If you enjoyed the
- 13:18video, please consider liking and
- 13:20subscribing. Um,
- 13:22yeah, join my Patreon. It's in the
- 13:24caption below. That helps me get things
- 13:25like this. I'm actually going to be
- 13:26giving this grinder away to someone in
- 13:29my Patreon, as well as all the grinders
- 13:31in my previous video linked right here,
- 13:32which is about budget grinders.
- 13:34Everything that I buy with Patreon
- 13:35funds, I give right back to Patreon. So,
- 13:37consider hopping in there. That would be
- 13:39fantastic. Um, other than that, thank
- 13:41you. Like, subscribe, do the stuff,
- 13:43share with your friends, whatever it is.
- 13:45Help align your friends grinders. Uh,
- 13:47you're going to hate me for this, but
- 13:48you're also going to love me because I
- 13:49do think you'll probably notice a
- 13:51difference on sweetness and clarity.
- 13:53Anyway, that's my time for today. Thank
- 13:55you very much. Hope you enjoyed and
- 13:57cheers.
About this transcript
This page contains the full transcript of HOW TO ALIGN YOUR GRINDER: Shim Alignment Tutorial by Lance Hedrick, generated from the public captions YouTube serves with the video. The transcript has 2,943 words across 406 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.