YouTube2Text

Hosting a Dedicated Server | The Isle Evrima — Transcript

by StolidSnowGuides · 3,169 words · 499 segments · language en · Watch on YouTube

Full transcript

  1. 0:05So, let's begin by pressing [music]
  2. 0:06start and then typing in CMD.
  3. 0:11Then we're going to click run as
  4. 0:12administrator, and when the prompt pops
  5. 0:14up, click yes.
  6. 0:16Then in the command prompt, we're just
  7. 0:17going to type in IP config.
  8. 0:21This is where all the stuff's going to
  9. 0:22pop up that we're going to need to set
  10. 0:24up our server and set a static IP. We'll
  11. 0:26be needing the IPv4 address, the subnet
  12. 0:29mask, and the default gateway. The
  13. 0:30default gateway is what you'll be using
  14. 0:33to log in to your router later.
  15. 0:36The IPv4 address is going to be our
  16. 0:38static IP, and this is basically what
  17. 0:41people will be using to connect to the
  18. 0:42server.
  19. 0:43If we don't set this as our static IP,
  20. 0:45then the server will just
  21. 0:47not show up for people, or people won't
  22. 0:49be able to connect because the IP will
  23. 0:51be
  24. 0:52changing cuz it'll be a dynamic IP
  25. 0:54rather than static. And
  26. 0:57if it's static, then people can join. Uh
  27. 0:59if it's not, then people won't be able
  28. 1:01to join, most likely.
  29. 1:03Let's set up our static IP.
  30. 1:05So, I'm on Windows 11, so I'm going to
  31. 1:07right-click on the start menu
  32. 1:10and click settings.
  33. 1:12And then I'm going to go to network and
  34. 1:14internet. Then when I'm here, I'm going
  35. 1:16to click on properties
  36. 1:18because wherever you're on ethernet or
  37. 1:20if you're on Wi-Fi, you'll select that.
  38. 1:23And then you'll scroll down, and uh
  39. 1:25mine's already set up, but this will be
  40. 1:27on automatic. You want to change this to
  41. 1:29manual
  42. 1:31uh on the IP settings.
  43. 1:34And then you're basically going to enter
  44. 1:35in the details from the command prompt
  45. 1:38over to these settings. So, as you can
  46. 1:39see here, the IP address is the same as
  47. 1:42the one in the command prompt. The
  48. 1:44subnet mask is also the same, and so is
  49. 1:47the gateway.
  50. 1:49You'll need these set up because
  51. 1:51that's how you keep a static IP. Then
  52. 1:53the preferred DNS is a bit different.
  53. 1:55So, you can use any of the DNS's online.
  54. 1:59There's like Cloudflare, Google, and all
  55. 2:02sorts. So, you can pretty much just
  56. 2:04Google free DNS servers. I'm using the
  57. 2:06Google one here. So,
  58. 2:08uh you'll basically want to do 8 8 8 8
  59. 2:13uh all with dots in between.
  60. 2:15And then for the alternative DNS, you
  61. 2:16want to do 8 8 4 4.
  62. 2:19Uh these are the
  63. 2:21uh DNS
  64. 2:22stuff for Google. Save that, and
  65. 2:25everything's all set up. So, this is
  66. 2:26basically the other way you can do it if
  67. 2:28you click on start and go to control
  68. 2:30panel. Uh this is basically the same way
  69. 2:32that you can do it, but on a simpler
  70. 2:34way. So, you can see there's network and
  71. 2:35sharing there cuz I've got large icons
  72. 2:37on. But otherwise, you can go to
  73. 2:39category, network and internet,
  74. 2:42and then click on network and sharing
  75. 2:43center.
  76. 2:46And then you want to click on change
  77. 2:47adapter settings.
  78. 2:50And then you can choose between Ethernet
  79. 2:52or Wi-Fi. If you're hosting on Wi-Fi,
  80. 2:53obviously you want to do that, but I'm
  81. 2:54hosting on Ethernet. So, I'm going to
  82. 2:56right click on that,
  83. 2:58and click on properties.
  84. 3:00Then I'm going to scroll down to the
  85. 3:01Internet Protocol Version 4 TCP/IP v4.
  86. 3:06I'm just going to click properties.
  87. 3:08And these are the same settings here
  88. 3:10that you saw us do in the other one.
  89. 3:13Uh as you can see the IP v4 address, the
  90. 3:15subnet mask, the default gateway,
  91. 3:17and the preferred and alternate DNS
  92. 3:21servers are all still there. Either way,
  93. 3:23this will all be set up the same, but
  94. 3:25that these are just the two different
  95. 3:27ways you can do it if you can't find
  96. 3:30one or the other. Then you just tick
  97. 3:32validate settings and click okay.
  98. 3:34It'll pop up with a little
  99. 3:36troubleshooting thing, and it should say
  100. 3:39that there's no issues.
  101. 3:42Like this.
  102. 3:43Couldn't identify the problem.
  103. 3:45Then you can just close it,
  104. 3:47and that's your static IP set up.
  105. 3:57So, this is a very crucial step. If you
  106. 4:00want your server to be seen by others,
  107. 4:01you obviously want to uh make sure you
  108. 4:04do all this correctly. So, follow this
  109. 4:06thoroughly.
  110. 4:07So, as you saw before, we have a default
  111. 4:10gateway
  112. 4:11um and we're going to use this to log in
  113. 4:14to our router. So, we're going to
  114. 4:15control C this and paste this into our
  115. 4:18browser. You can use Edge, you can use
  116. 4:19Chrome, you can use whatever.
  117. 4:21And this should lead you to your modem.
  118. 4:24You'll obviously want to log in using
  119. 4:25your uh details that you can find in the
  120. 4:27manual or on the back of the modem or
  121. 4:29whatever.
  122. 4:30Then,
  123. 4:31uh everyone's modem's different. Uh mine
  124. 4:34says WAN services. That's where I'm
  125. 4:36going to be doing my port forwarding.
  126. 4:38Um
  127. 4:39yours might have different names for it.
  128. 4:43Um
  129. 4:45but yeah, port forwarding, port mapping,
  130. 4:48uh it's you know, they they should be uh
  131. 4:51the same. If it has
  132. 4:53kind of the similar setup, then they
  133. 4:55should be correct. So, obviously, mine's
  134. 4:57already set up, but uh you want to make
  135. 4:59sure it's TCP and UDP. Um if you can't
  136. 5:02do that, you'll just, you know, set them
  137. 5:04up separately.
  138. 5:05The ports are obviously going to be the
  139. 5:07ports that you want to use to forward. I
  140. 5:08just have mine in a in a certain range
  141. 5:11between 7777 and 7780.
  142. 5:15And obviously, the IP
  143. 5:17that we have uh from the hosting
  144. 5:20computer, uh which is the IPv4 address
  145. 5:23we saw in the command prompt earlier.
  146. 5:26So, you'll enter all that in, uh give it
  147. 5:29a name, make sure it's on, and uh click
  148. 5:32the tick to apply the settings. And that
  149. 5:34should be pretty much it. You shouldn't
  150. 5:36have to restart your modem, but some
  151. 5:37people might have to. Um but it should
  152. 5:40all be set up and ready to go.
  153. 5:44[music]
  154. 5:47So, now we need to do basically the same
  155. 5:49thing but on the computer. So we're
  156. 5:51going to click the start menu and we're
  157. 5:53going to type in Windows Defender
  158. 5:54Firewall with advanced security.
  159. 5:57Now you can just type in Windows
  160. 5:58Defender and it will probably pop up.
  161. 6:03And then we want to go to inbound rules.
  162. 6:06This is uh
  163. 6:07because incoming connections. So
  164. 6:10you know, you're getting an inbound
  165. 6:11connection.
  166. 6:13Uh so obviously again, I have mine set
  167. 6:15up already but I'm going to show you how
  168. 6:16to do it. So you go new rule
  169. 6:19and then you go to port
  170. 6:21cuz you're only going to be forwarding
  171. 6:22the port.
  172. 6:24And in this one you can only do either
  173. 6:26TCP or UDP. So you'll just put in the
  174. 6:29port that you put in earlier.
  175. 6:32So pretty much the same way. You do
  176. 6:347777-7780
  177. 6:36or whatever your ports are. You know,
  178. 6:38you can choose different ports but these
  179. 6:40are like pretty much the default.
  180. 6:42So then you'll click next, allow the
  181. 6:44connection. It'll probably default to
  182. 6:46block the connection. Just click allow
  183. 6:48the connection and then click next. Uh
  184. 6:50make sure all these are ticked. Give it
  185. 6:52a name, just whatever you'll recognize
  186. 6:53it by in case you need to change this in
  187. 6:55the future if you have to change the
  188. 6:57ports for whatever reason if the ports
  189. 6:59are being used by other things.
  190. 7:01Obviously you'll name it after TCP
  191. 7:03because you're using TCP. And then
  192. 7:05you'll basically do the same thing for
  193. 7:07UDP. New rule, port, next and then you
  194. 7:11tick UDP instead of TCP, specific local
  195. 7:13port and then
  196. 7:15the same ports as earlier.
  197. 7:19Next, allow the connection.
  198. 7:21All of the all of them ticked.
  199. 7:23And then name it. Then you can click
  200. 7:24finish. Obviously I already have mine
  201. 7:26set up so I don't want to do doubles.
  202. 7:28And just so you can see
  203. 7:30that's how it should look if you double
  204. 7:31click on it. Just showing you that.
  205. 7:34That's how mine are set up. That's how
  206. 7:36it all should work.
  207. 7:39And there you go. Your server should now
  208. 7:41be technically visible to everyone.
  209. 7:47[music]
  210. 7:52So, the link to this site will be in the
  211. 7:54description. This is basically
  212. 7:57uh what you'll need to download the
  213. 7:58server files required for the server.
  214. 8:02So,
  215. 8:03this is Steam CMD. This is how you
  216. 8:05download the server files.
  217. 8:08So, when you go to this site, you'll
  218. 8:09scroll down till you see uh download
  219. 8:12Steam CMD for Windows, the one next to
  220. 8:14it. You just click on that. It'll
  221. 8:15download a Steam CMD.zip.
  222. 8:19You'll just download that wherever you
  223. 8:21want. Um and then extract that to
  224. 8:24basically wherever you want. And once
  225. 8:25you've extracted the zip file, then uh
  226. 8:28you should be able to open the folder
  227. 8:30and scroll down to steamcmd.exe.
  228. 8:34Double-click on that.
  229. 8:36And you should see this window pop up.
  230. 8:38And you'll basically want to type in
  231. 8:41login anonymous.
  232. 8:43And that'll basically
  233. 8:45log you into the Steam stuff so [snorts]
  234. 8:48that you don't have to type in a
  235. 8:50password and all that each time that you
  236. 8:52want to update and stuff like that. Then
  237. 8:54you'll create a folder wherever you want
  238. 8:57your server to be. You probably won't
  239. 8:59want it on the C drive though because
  240. 9:01sometimes there's permission issues and
  241. 9:03server doesn't start up correctly and
  242. 9:04stuff like that. So, put it anywhere
  243. 9:06other than in the main C drive. And then
  244. 9:10uh copy the file path in the file
  245. 9:13explorer.
  246. 9:15And then type in force_install_dir.
  247. 9:20And then space and then paste in uh your
  248. 9:23file path. It'll tell you
  249. 9:26um to use that before log on, but it'll
  250. 9:28still work either way. But probably do
  251. 9:30it first in case they update in the
  252. 9:32future.
  253. 9:33Then you want to type
  254. 9:38-beta every month. This is obviously the
  255. 9:41app ID that holds all the server files.
  256. 9:44Obviously, mine's already done. It's
  257. 9:46already up to date cuz I've already got
  258. 9:47it installed, but it will start
  259. 9:49installing for you and eventually be
  260. 9:51completed.
  261. 9:54And that's it. You have the server files
  262. 9:55and you're ready to start your server
  263. 9:57up.
  264. 10:02Before we start it up though, there's a
  265. 10:03few things we need to set up.
  266. 10:06So, obviously, you're going to want to
  267. 10:08see the file extension. So, if you
  268. 10:09haven't already got it,
  269. 10:11go to your file explorer, click the
  270. 10:13three dots, click options, then you want
  271. 10:15to click on view.
  272. 10:17And then where it says hide extensions
  273. 10:20for known file types, make sure that's
  274. 10:22unchecked and then click apply.
  275. 10:25Then click okay.
  276. 10:26And now you should be able to see like
  277. 10:27.txt and .exe and all that stuff if you
  278. 10:32haven't already. Otherwise, you don't
  279. 10:34need to do this because you can already
  280. 10:36see it all.
  281. 10:37Next, you're going to probably want to
  282. 10:38configure your server so that you can
  283. 10:41actually
  284. 10:42get it up and running cuz without doing
  285. 10:44this, uh
  286. 10:46it'll either pop up with the default
  287. 10:48stuff or it just won't pop up at all.
  288. 10:51So, you want to go to the aisle, saved,
  289. 10:53config, Windows server.
  290. 10:55And then you should see game.ini,
  291. 10:57engine.ini, game user settings. If you
  292. 11:00don't see these, you can make these
  293. 11:02with text files and then obviously
  294. 11:05change the extension to .ini and edit
  295. 11:08these in notepad. You'll most likely
  296. 11:10have to create these because for some
  297. 11:12reason these don't get created
  298. 11:14automatically.
  299. 11:15But then you can go in here and in the
  300. 11:17game.ini, you can basically put in your
  301. 11:19admin Steam ID. So, whoever you want as
  302. 11:21admin, you can put in their Steam 64
  303. 11:23IDs. This is basically where you can
  304. 11:25change the name of your server as well
  305. 11:28and the max player count, if you want a
  306. 11:30password on the server. And eventually
  307. 11:33they're going to make this uh even more
  308. 11:35customizable in the future. So, there'll
  309. 11:38be more settings and stuff in the future
  310. 11:40that you can add and change in here at
  311. 11:43any time. And then engine.ini uh you can
  312. 11:45find all this stuff in the guide. You'll
  313. 11:48probably want to
  314. 11:49uh copy-paste all this. Uh I don't know
  315. 11:52if and if half of this needs to be in
  316. 11:54here,
  317. 11:55but I can guarantee you the Epic Online
  318. 11:57Services part definitely needs to be in
  319. 11:59this. Make sure you copy that in and put
  320. 12:01it in the bottom of your engine.ini
  321. 12:04file. You need the Epic Online Services
  322. 12:06thing cuz otherwise your server won't be
  323. 12:08seen properly or it won't be able to
  324. 12:10start up correctly. So, just make sure
  325. 12:12you have that in there. And that's uh
  326. 12:15the server setup. You can configure
  327. 12:17everything to your liking.
  328. 12:24[music]
  329. 12:26So, I don't know how you would apply
  330. 12:28this to any uh current information as
  331. 12:30this is no longer able to be used
  332. 12:33anymore, but I'm going to show you this
  333. 12:34anyway.
  334. 12:35So, if you right-click on the
  335. 12:37LServer.exe
  336. 12:39and then uh create a desktop shortcut,
  337. 12:41you can essentially edit the shortcut
  338. 12:44and instead of having to do uh what's
  339. 12:47coming up next, you could go into the
  340. 12:49properties of this
  341. 12:51and then this little window would pop up
  342. 12:53and you could change
  343. 12:54that target section to basically be the
  344. 12:59launch options. The issue with it now is
  345. 13:02that the Epic Online Services part is
  346. 13:05way too long. For some reason there's a
  347. 13:08limit on this target box.
  348. 13:11So, you can't really use this, but this
  349. 13:14is something that you used to be able to
  350. 13:16do,
  351. 13:17but not to worry, you can use the next
  352. 13:20step uh to start your server correctly.
  353. 13:23The best way to do this, however, is to
  354. 13:26find where you want to put this uh
  355. 13:29and then right-click
  356. 13:31and make a new text document a dot txt
  357. 13:35file.
  358. 13:36And you can name this whatever you want.
  359. 13:39I called it server start just for
  360. 13:41simplicity's sake and you can just leave
  361. 13:43it as is and make it a text and then
  362. 13:46like enter it in and then change it
  363. 13:47later.
  364. 13:48Or
  365. 13:49we can just change the extension now to
  366. 13:52a dot bat which means batch file.
  367. 13:55It'll pop up this dialog box. You just
  368. 13:57click yes cuz this will work.
  369. 14:00And then you can basically just edit it
  370. 14:02in notepad and basically you would enter
  371. 14:04in
  372. 14:05the stuff but obviously I already have
  373. 14:07mine set up. Here's the other way you
  374. 14:09can just do it through here. I'm on
  375. 14:11Windows 11 so you just do that. You can
  376. 14:13click edit or edit in notepad or you can
  377. 14:15just use the little
  378. 14:16drop-down thing. Either way
  379. 14:18this is all the stuff that you will need
  380. 14:21to put into your batch file and you'll
  381. 14:23basically want to change this to where
  382. 14:26you put your Steam CMD.
  383. 14:29And you'll want to change this to where
  384. 14:31your server is which is where you
  385. 14:34installed your server in the first place
  386. 14:36and you'll want to make sure you change
  387. 14:38this line specifically the F the L
  388. 14:41server to
  389. 14:42like the L server dot exe. That's where
  390. 14:44your exe is located. You'll copy it the
  391. 14:46same way we did before.
  392. 14:48You'll change the port to the port
  393. 14:50you're using the max players if you want
  394. 14:52to have different max players but I
  395. 14:53don't think that's configured in this
  396. 14:55anymore.
  397. 14:56But that's essentially it. Then you can
  398. 14:57just double click that and it will start
  399. 14:59your server up. So just to showcase
  400. 15:01what's going on here. I double clicked
  401. 15:02on the batch file the start file and it
  402. 15:05starts up Steam CMD. It checks for the
  403. 15:07updates. It says it's fully updated
  404. 15:11already. Now it says our server started
  405. 15:13and it should start up this here. The
  406. 15:15log window pops up. It says error map
  407. 15:16loaded. That's a new thing in this
  408. 15:18update. And as you can see it's going
  409. 15:21through all the things.
  410. 15:23Uh starting up the maps, basically.
  411. 15:27Uh goes through the title map, and then
  412. 15:28it goes to the actual map that you
  413. 15:31selected. In this case, it's Gateway.
  414. 15:33These errors are all just a bunch of
  415. 15:35engine errors, and they're nothing to
  416. 15:37worry about.
  417. 15:38Um the the yellow warnings about
  418. 15:40vertexes and stuff, you can just ignore
  419. 15:42all that. And then eventually,
  420. 15:45after some time,
  421. 15:47you should see successfully created
  422. 15:49session "Ktesha Rima". Uh obviously,
  423. 15:52that'll be the name of your server that
  424. 15:54you put in the key menu earlier. And it
  425. 15:56says "Session started successfully." So
  426. 15:57then, if I control C it uh
  427. 16:01in this log window specifically,
  428. 16:03uh it'll close the server. And then once
  429. 16:06it says "Game engine shut down",
  430. 16:08then you control C once more,
  431. 16:10and this countdown will begin.
  432. 16:12And then once it reaches zero, it'll
  433. 16:14repeat the process. This is for in case
  434. 16:17uh
  435. 16:17the server crashes,
  436. 16:19uh if if it ever crashes or anything
  437. 16:21like that, then it'll wait a minute, and
  438. 16:24then restart the server. It's also
  439. 16:27useful so that you don't have to go
  440. 16:29through to Steam CMD
  441. 16:31and type in all of that stuff again. You
  442. 16:34can just start this up anytime you want
  443. 16:36to update the server.
  444. 16:37Uh
  445. 16:38and yeah, you don't have to worry about
  446. 16:40a single thing. And then once again,
  447. 16:42there it is, "Session started
  448. 16:44successfully." If it says "Session
  449. 16:45started successfully" and there's no
  450. 16:47other warnings uh above that
  451. 16:50that mention anything about uh
  452. 16:51forwarding ports or binding IPs,
  453. 16:54then you should be good to go.
  454. 16:58So, I'm hopping into the game here just
  455. 17:00to show you um
  456. 17:03just by following all of these steps,
  457. 17:05uh if you go to the session filter, go
  458. 17:07to unofficial,
  459. 17:10and my server's obviously up here. I can
  460. 17:12see mine's got ping zero, it's got all
  461. 17:14the names name and stuff. Got the game
  462. 17:17mode. But you can also if you can't find
  463. 17:19your server, you can just type it in to
  464. 17:21the search bar here.
  465. 17:24And if you get scanning all frequencies
  466. 17:26just constantly loading like this, just
  467. 17:28delete one of the letters or just delete
  468. 17:30one of the letters and it should
  469. 17:33restart the scanning and actually find
  470. 17:35the server.
  471. 17:38Then you should be able to connect. And
  472. 17:40if this connecting screen stays up for
  473. 17:41too long,
  474. 17:43there's in the current update there's a
  475. 17:45bug in the game you need if you have the
  476. 17:48BQ system in the game any, just remove
  477. 17:52that.
  478. 17:53Um or just remove it from the game.ini
  479. 17:56and the connecting issue should go away.
  480. 17:59And that's pretty much it. That's how
  481. 18:01you set up your server. You can see I
  482. 18:04set myself as an admin here.
  483. 18:06Um obviously cuz it's my server. You can
  484. 18:09choose to be an admin or you can choose
  485. 18:10not to be. There's all a whole bunch of
  486. 18:13settings and stuff and they're
  487. 18:15apparently planning on adding more
  488. 18:17customer customization
  489. 18:20for your servers
  490. 18:22in the future. So be on the lookout for
  491. 18:25that.
  492. 18:26I'll be sure to mostly try and keep up
  493. 18:29to date
  494. 18:31on
  495. 18:32keep you guys up to date on everything
  496. 18:34that's happening. But that is going to
  497. 18:36be it. That's how you set up your
  498. 18:38server.
  499. 18:42Happy hosting.

About this transcript

This page contains the full transcript of Hosting a Dedicated Server | The Isle Evrima by StolidSnowGuides, generated from the public captions YouTube serves with the video. The transcript has 3,169 words across 499 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.