Get the job done right, quickly, and efficiently with Ubbink’s Aerflux Configurator — Transcript

Full transcript

1. 0:09Click on create a new project.
2. 0:13Enter the project details and give it a
3. 0:15name.
4. 0:17Assign a name to the calculation.
5. 0:56Add any relevant files.
6. 0:58Ready? Click on room planner to
7. 1:00continue.
8. 1:03Tip, want to calculate the ventilation
9. 1:05needs for an entire project? You can
10. 1:07catch up multiple calculations under the
11. 1:10same project.
12. 1:12Add rooms by floor.
13. 1:18Define the room type and enter the
14. 1:19surface area.
15. 1:24Repeat this step for each room.
16. 1:27Tip, you can rename rooms and floors.
17. 1:30The program automatically assigns the
18. 1:32correct function to each room.
19. 1:36If a house consists of multiple floors,
20. 1:38you can add floors.
21. 2:15>> Added all the rooms.
22. 2:17Then, click on flow rates.
23. 2:20Here, you'll see the ventilation needs
24. 2:22for each room.
25. 2:24The values are automatically adjusted
26. 2:26according to legal standards.
27. 2:31The flow rates can be manually adjusted.
28. 2:40Satisfied with the result? Then, click
29. 2:42on components.
30. 2:44Select the distribution box which you
31. 2:46would like to use.
32. 2:58Then, select which Air Excellent duct
33. 3:00you would like to use.
34. 3:03Fill in its length from the distribution
35. 3:05box to the value.
36. 3:12Click on the pencil icon to add other
37. 3:14ventilation system components.
38. 3:22Click on go to component pages.
39. 3:27On the unit page, click add unit.
40. 3:33Select the unit that suits your system
41. 3:34and click save.
42. 3:37Go to the terminal page.
43. 3:39Click on add terminal.
44. 3:41Select a terminal that meets your needs.
45. 3:58>> Go to mass flow.
46. 4:00On this page, you can see the air flow
47. 4:02for each component.
48. 4:38Ready? Click on bill of materials to
49. 4:41continue. You'll receive a list of the
50. 4:43required materials, including their
51. 4:45codes.
52. 4:59Use the search bar to search for and add
53. 5:01additional materials.
54. 5:10Adjust the quantities as needed.
55. 5:22Have you completed the design?
56. 5:25Click on reports to review all
57. 5:27calculation details.
58. 5:30Select the files which you would like to
59. 5:32download.
60. 5:38And click on export selection.
61. 5:55>> You can also download the bill of
62. 5:57materials in an Excel file.
63. 6:04Click on project to return to the
64. 6:05general overview.