YouTube2Text

Gas Laws part 3 — Transcript

by Chemistea Time · 1,227 words · 104 segments · language en · Watch on YouTube

Full transcript

  1. 0:00[Music] ChemisTea Time
  2. 0:15Hello and welcome back to ChemisTea time!
  3. 0:17For today’s lesson we will be continuing on with our discussion on gases and begin
  4. 0:22talking about gas mixtures.
  5. 0:23Up until now we have only been dealing really with pure gases with single species.
  6. 0:28As we learned in previous lessons the ideal gas law assumes that all gasses behave identically
  7. 0:33and they do not exhibit intermolecular attractive or repulsive forces.
  8. 0:37As a result, ideal gas equation does not take into account the nature of gases, only the
  9. 0:44amount.
  10. 0:45With this in mind let's suppose we have a three gasses that are all present in equal
  11. 0:50amounts at the same conditions.
  12. 0:52If we mixed these together what would be the total pressure of the mixture?
  13. 0:56Well let’s think this through.
  14. 0:58Pressure of a gas is dependent on how much gas is present so if we mixed these gasses
  15. 1:04together the total pressure of the system should be sum of pressures of the individual
  16. 1:10gasses.
  17. 1:12This is known as Dalton’s law of partial pressure, where the partial pressure is in
  18. 1:16reference to the individual gases present in a gas mixture.
  19. 1:20This law written mathematically is as followed: The total pressure is equal to the sum of
  20. 1:26all the partial pressures of gases in a gas mixture.
  21. 1:30Let’s try calculating the partial pressure of a gas in a mixture.
  22. 1:34Imagine we have gas A and B in a container at a known Temperature and Volume.
  23. 1:39We can solve for the partial pressure of gas A by setting up the following expression:
  24. 1:45Pressure of gas A is equal to the moles of gas A times the gas constant times temperature
  25. 1:51all divided by volume.
  26. 1:53As you can see we can use the ideal gas law to solve for a partial pressure of a gas in
  27. 1:58a mixture.
  28. 2:00We can do the same thing to find the partial pressure of Gas B.
  29. 2:03If we were to add these partial pressures together we can determine the total pressure
  30. 2:08of our system.
  31. 2:09Now one last thing to point out in the ideal gas law equation will give you moles, this
  32. 2:15can be written as the total moles in your system.
  33. 2:19So in the previous example for gas A and B if we added the moles of each gas together
  34. 2:24this would be equal to the total number of moles in your system.
  35. 2:27I know this is a lot of information to soak in so lets do an actual example where we are
  36. 2:32applying dalton's law of partial pressures.
  37. 2:36Deep-sea divers must use special gas mixtures in their tanks, rather than compressed air,
  38. 2:41to avoid serious problems, most notably a condition called “the bends.”
  39. 2:46At depths of about 350 feet, divers are subject to a pressure of approximately 10 atmospheres.
  40. 2:52A typical gas cylinder used for such depths contains 51.2 grams of Oxygen and 326.4 grams
  41. 3:00of Helium.
  42. 3:01The tank also has a volume of 10.0 Liters.
  43. 3:05What is the partial pressure of each gas at 20.00 degrees Celcius, and what is the total
  44. 3:09pressure in the cylinder at this temperature?
  45. 3:12The first thing you should always do when approaching a problem is highlight or write
  46. 3:16out the information you are given and what you looking for.
  47. 3:20In this example they provide us with the mass of oxygen and helium along with the volume
  48. 3:25of the tank and temperature.
  49. 3:28They are asking us to calculate the total pressure in the tank.
  50. 3:32They also gave us information that is not necessarily important to solving the question
  51. 3:36also which was the depth and pressure of the diver.
  52. 3:40Now that we have identified the important components of this problems lets go ahead
  53. 3:44and approach this problem.
  54. 3:47We know we will be using the ideal gas law in order to determine the partial pressure
  55. 3:51for each gas.
  56. 3:54Lets go ahead and write these equations out.
  57. 3:57We are provided with temperature and volume and they gave us a way to find the moles of
  58. 4:02oxygen and helium because they gave us mass of each gas.
  59. 4:07We can use molar mass to convert grams to moles which we end up with 81.54 moles of
  60. 4:13helium and 1.60 moles of oxygen.
  61. 4:17The next step is to plug the number of moles of each gas into the equation to determine
  62. 4:22the partial pressure of each gas.
  63. 4:25We end up calculating for Helium 196.2 atm and for oxygen is 3.85 atm.
  64. 4:32The next part of the problem asks us to determine the total pressure of the system which is
  65. 4:37dalton's law of partial pressures and we just simply add them together and we end up calculating
  66. 4:42a total pressure of 200.1 atm.
  67. 4:46Another way we can describe the composition of a gas mixture is using percentages, or
  68. 4:50more commonly referred to as a mole fraction, which is denoted by the greek letter Chi.
  69. 4:56This is simply the ratio of gas A in a mixture.
  70. 4:59The equation that you can use to calculate the mole fraction is by either dividing the
  71. 5:04moles of gas A by the total number moles or by taking the partial pressure of gas A divided
  72. 5:10by the total pressure of the system.
  73. 5:13These expressions can then be rearranged to the following which states that the partial
  74. 5:18pressure of gas A or the mols of gas A is equal to the mole fraction multiplied by the
  75. 5:23total pressure or total moles.
  76. 5:25Lets try a practice calculating mole fractions: A 12.5 Liter scuba diving tank contains a
  77. 5:32helium-oxygen gas mixture made up of 24.2 grams of Helium and 4.32 grams of oxygen at
  78. 5:39298 Kelvin.
  79. 5:41Calculate the mole fraction and partial pressure of each gas in the mixture and the total pressure
  80. 5:46of the system.
  81. 5:47Well let's first identify what they gave us: They told is mass of each gas, volume, and
  82. 5:50temperature.
  83. 5:51Looking at the ideal gas law they provided us everything to determine pressure.
  84. 5:54We have 2-ways we can solve this problem.
  85. 5:56We can either determine partial pressure of each gas by using moles of each gas or we
  86. 6:01can calculate the total number of moles to determine the total pressure and use mole
  87. 6:06fractions to calculate partial pressure of each gas.
  88. 6:10First off lets calculate the number of moles for Helium and Oxygen.
  89. 6:12The problem said the gas mixture was comprised of 24.2 grams of Helium and 4.32 grams of
  90. 6:13Oxygen.
  91. 6:14We can use molar mass to convert to moles of each gas.
  92. 6:17This equates to 6.05 moles of Helium and 0.135 moles of oxygen.
  93. 6:24Next let's calculate the mole fractions of each gas by using the equation.
  94. 6:29The mole fraction of Helium calculates to be 0.97817
  95. 6:34and for oxygen is 0.021827.
  96. 6:39We can calculate the total pressure by using the total moles of our system which we get
  97. 6:43by adding moles of Helium and moles of oxygen together which equates to 6.185 moles.
  98. 6:51We plug can this into the ideal gas equation and the total pressure calculates to be 12.099
  99. 6:57atmospheres.
  100. 6:58In order to find the partial pressure of Helium and oxygen we must multiply the total pressure
  101. 7:04by each mole fraction.
  102. 7:06The partial pressure for helium is 11.8 atmospheres and for Oxygen it is 0.264 atmospheres.
  103. 7:14It is important to review the concepts covered in this lesson and practice the problems.
  104. 7:19Thank you for joining me on ChemisTea Time and I will you see you next time.

About this transcript

This page contains the full transcript of Gas Laws part 3 by Chemistea Time, generated from the public captions YouTube serves with the video. The transcript has 1,227 words across 104 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.