Free CCNA | Interfaces and Cables | Day 2 | CCNA 200-301 Complete Course — Transcript
Full transcript
- 0:01Welcome to my complete CCNA, Cisco Certified Network Associate course.
- 0:06This is Jeremy’s IT Lab.
- 0:09This course aims to be a complete course for the CCNA, including everything you need to
- 0:13pass the exam, all 100% free.
- 0:17Stay tuned till the end of the video for the quiz to test your knowledge of the material
- 0:21in this video.
- 0:23Also, remember to download and use the Anki flashcards with the link in the description.
- 0:28Let’s get started.
- 0:31This second lesson is about interfaces and cables.
- 0:35In the last video we talked about some different kinds of devices you will find in networks.
- 0:40This lesson will focus on how we connect them, specifically how we connect them with cables.
- 0:47Wireless connections are also a topic we’ll cover, but that’s for later in the course.
- 0:53Take a look at this photo.
- 0:55This is the front of a switch.
- 0:58Notice the 24 interfaces, also known as ports.
- 1:02Remember, as we learned in the last lecture, one characteristic of switches is that they
- 1:07tend to have lots of interfaces to connect end hosts like PCs and servers to.
- 1:12Now let’s look at that those words above the interfaces.
- 1:15I’ll zoom in.
- 1:1910/100/100Base-T ports (1 – 24) – Ports are Auto-MDIX.
- 1:25Unless you’ve already studied this stuff, you probably have no idea what that means.
- 1:31Don’t worry, by the end of this video you’ll understand all of this and more.
- 1:38Now let’s focus on the interfaces themselves.
- 1:41I’ll zoom in again.
- 1:44Do you recognize this shape?
- 1:46If your computer is connected to a wired network, it’s surely using a port like this to connect
- 1:51to the network.
- 1:53These are called RJ-45 ports.
- 1:56RJ stands for Registered Jack, by the way.
- 1:59Let’s look at the RJ-45 connector at the end of a cable, I’m sure you’ve seen one
- 2:06before.
- 2:07These are all cables with RJ-45 connectors.
- 2:11As you can see there are some variations in design and color, but all of these connectors
- 2:16would fit into the ports we saw in the previous slide.
- 2:20The RJ-45 connector is used on the end of a copper Ethernet cable.
- 2:26There are Ethernet cables which do not use copper wiring as well, but we’ll get to
- 2:30that later.
- 2:32First of all though, what is Ethernet?
- 2:37Ethernet is a collection of network protocols and standards, rather than just a single protocol.
- 2:43So really Ethernet isn’t one single thing, making it difficult to define exactly what
- 2:48it is.
- 2:50For the purpose of this lesson, we will focus on types of cabling as defined by Ethernet
- 2:55standards.
- 2:57As said above there are many standards included in Ethernet, but the focus of this lesson
- 3:02is interfaces and cables, so that’s what we’ll focus on.
- 3:07However, we will learn other aspects of Ethernet in future lessons.
- 3:11Now, before we learn about Ethernet cable standards, I want to give a brief explanation
- 3:16of why we need network protocols and standards.
- 3:21If two people are talking to each other, and one only speaks English, and the other only
- 3:26speaks Japanese, there’s not going to be a much, or any, communication between them.
- 3:32What they need is some agreed upon system of communicating, like a common language between
- 3:37them.
- 3:39Network protocols serve that purpose for network devices.
- 3:42That’s why standards like Ethernet exist.
- 3:47Since we’re talking about interfaces and cables in this video, here’s a more relevant
- 3:52example.
- 3:54If you’re trying to connect to, for example, a network switch, but the maker of the cable
- 3:59and the maker of the switch haven’t agreed upon the size and shape of the connector and
- 4:04port, you won’t be able to connect them.
- 4:07That’s why there are industry standards that all vendors follow, both in terms of
- 4:12physical standards like connectors and cables like these, as well as logical standards,
- 4:16like IP, the internet protocol.
- 4:20Now, connections between devices in a network operate at a set speed.
- 4:27These speeds are measured in bits per second.
- 4:30What is a bit?
- 4:32Well it’s a value represented by either a 0 or a 1.
- 4:37This binary code is how computers work.
- 4:40YouTube, this video, your operating system, all of it just a series of 0s and 1s which
- 4:48your computer interprets.
- 4:51When communicating across a copper network cable, a variation in the electrical signal
- 4:56is interpreted by the receiving device as a 0 or a 1.
- 5:00So, that’s a bit, what’s a byte?
- 5:02Here we have a series of 8 bits.
- 5:098 bits is equal to 1 byte.
- 5:13Now, speed is measured in bits per second.
- 5:17Imagine a byte, 8 bits, of data being sent along a wire.
- 5:23It reaches the neighboring device one bit at a time like this.
- 5:28It doesn’t operate one byte at a time like this.
- 5:31So, remember, speed is measured in bits per second, for example kilobits per second, megabits
- 5:39per second, gigabits per second, and not bytes per second.
- 5:45Data on a hard drive for example is measured in bytes, however, so remember a Gigabyte
- 5:51is actually 8 times larger than a gigabit.
- 5:55So let’s review some of these measurements.
- 5:581 kilobit is equal to 1,000 bits.
- 6:02Add three zeroes to that
- 6:05And you get 1 megabit, which is 1 million bits.
- 6:09Add another three zeroes,
- 6:11And you get one gigabit, or 1 billion bits.
- 6:15Add another three zeroes to that
- 6:18and you get one terabit, 1 trillion bits.
- 6:21You’re not going to see larger units than this when it comes to network speed, and really
- 6:27you’re not going to see terabits either.
- 6:30Speeds are always increasing, however, so terabits-per-second speeds may be commonplace
- 6:34soon enough!
- 6:35Now, there are further units, here’s a snapshot from wikipedia.
- 6:41Beyond terabits there are petabits, exabits, zettabits, yottabits, and more.
- 6:47Don’t worry about memorizing all of these though, you’re not going to see network
- 6:50speeds like these anytime soon!
- 6:54Okay, finally lets talk about some Ethernet standards.
- 6:58These are all defined in the IEEE 802.3 standard.
- 7:04The IEEE is the institute of electrical and electronics engineers.
- 7:09You’ll notice all of these Ethernet standards begin with IEEE 802.3.
- 7:15Let’s take a look.
- 7:17So, here’s a table of some IEEE standards for copper Ethernet cables.
- 7:24We’ll also take a look at fiber optic cables later in this lesson, but I decided to split
- 7:29them up.
- 7:32We have one for each of the common network cable speeds, 10 megabits per second, 100
- 7:37megabits per second, 1 gigabit per second, and 10 gigabits per second.
- 7:44The next column lists the common names.
- 7:47These are the names we usually use when talking about different networks interfaces, cables,
- 7:52and their speeds, for example in a work environment.
- 7:56The next column lists the official IEEE standard in which they are defined.
- 8:01You would probably never use these names when talking with other network engineers about
- 8:05a cable, but you should be familiar with them.
- 8:10This next column lists informal standard names given to each standard.
- 8:1510 base-T, 100base-T, 1000base-T, and 10gbase-t.
- 8:22The numbers obviously refer to their speeds.
- 8:25How about base and T?
- 8:27Well, base refers to baseband signalling.
- 8:31That’s totally out of the scope of the CCNA, but just so you know the meaning.
- 8:37T refers to twisted pair cabling, and we’ll talk about that very soon!.
- 8:42Finally, the maximum cable length.
- 8:46Notice that all of them are 100 meters, that’s the maximum length for twisted pair cables
- 8:51as defined in Ethernet, for performance and technical reasons.
- 8:55So, that’s a lot of information, but I recommend you memorize these standards.
- 9:01It may seem difficult, but with the flashcards in the description, it’s actually quite
- 9:05easy!
- 9:06So, don’t forget to download and use the flashcards in the description, and also make
- 9:10your own if you want.
- 9:11Okay, now let’s continue and look in more detail at the physical cables themselves.
- 9:19The copper cables used in Ethernet standards are UTP cables.
- 9:23UTP stands for Unshielded Twisted Pair.
- 9:29Unshielded means that the wires have no metallic shield, which can make them vulnerable to
- 9:34eletrical interference.
- 9:37The Twisted pair part is easy to understand from this photo, as you can see there are
- 9:41four pairs of cables twisted together.
- 9:44The twist actually helps protect against eletromagnetic interference, or EMI.
- 9:49So, there are four pairs of wires twisted together, that makes eight wires in total.
- 9:55Let’s take a look at one of those RJ-45 connectors we saw earlier
- 10:01If you count the number of pins here, you’ll find that there are 8 pins, perfect for the
- 10:05number of wires we saw in the last photo.
- 10:08However, not all of the Ethernet standards we saw before actually use all 8 wires.
- 10:1510BASE-T and 100BASE-T, also known as Ethernet and Fast-Ethernet cables, use 2 pairs, or
- 10:224 wires.
- 10:241000BASE-T and 10GBASE-T, however, use all 4 fours, or 8 wires.
- 10:30Let’s focus on the first two for now, 10BASE-T and 100BASE-T.
- 10:35So, let’s say we’re connecting a PC to a switch with a FastEthernet connection.
- 10:44These numbers represent the pins on the RJ-45 on the PCs network interface card and the
- 10:49switch’s interface.
- 10:52There are 8, but we will only use 4, or 2 pairs, since this is a fastethernet, or 100base-t,
- 10:59connection.
- 11:01The first pair is at pin positions 1 and 2,
- 11:04and will connect to pins at positions 1 and 2 on the switch’s network interface.
- 11:11Although in this diagram the wires look straight, remember that in a UTP cable the pairs are
- 11:16twisted together, so in a real cable these two wires would actually be twisted together
- 11:21like in the photo we saw.
- 11:24The PC will use pins 1 and 2 to transmit data to the switch,
- 11:29which we can write as Tx.
- 11:32Because the PC is transmitting data on pins 1 and 2, the switch cannot transmit on those
- 11:38pins, it has to receive data
- 11:40which we can write as Rx, on pins 1 and 2.
- 11:44There’s an important point to remember here.
- 11:48The network interface card on a PC or server transmits data on pins 1 and 2, and the interfaces
- 11:55on a switch receive data on pins 1 and 2.
- 11:59Now, the next pair that is used in a 10BASE-T or 100-BASE-T cable is not 3 and 4.
- 12:05It’s 3 and 6.
- 12:07And, of course, the function of each pin is opposite of the pair on pins 1 and 2.
- 12:13On the switch,
- 12:15Pins 3 and 6 are used to transmit Data, and on the PC
- 12:19Pins 3 and 6 and used to receive data.
- 12:23This allows what’s called Full-Duplex transmission.
- 12:28Full-Duplex transmission means that both devices and send data at the same time, and no problems
- 12:35like collisions will occur because they use separate wires to transmit and receive data.
- 12:42Just like that, both devices send data at the same time and there are no problems.
- 12:46Let’s change the device on the left from a PC to a router.
- 12:52Just as a PC usually connects to a switch, a switch usually connects to a router.
- 12:58Once again, it’s a fastethernet, or 100BASE-T connection, so two pairs are used, 1 and 2, and
- 13:053 and 6.
- 13:06Now, which pairs on which side are used to transmit, and which are used to receive?
- 13:11Well, we know how a switch functions from the last slide.
- 13:16Pins 1 and 2 receive data,
- 13:19and pins 3 and 6 transmit data.
- 13:22How about a router?
- 13:23Well, the network interfaces on a router transmit and receive data on the same pairs that a
- 13:29PC’s network interface card does.
- 13:32A router transmits data on pins 1 and 2
- 13:36And receives data on Pins 3 and 6.
- 13:39Again, Ethernet uses full-duplex transmission
- 13:43So the two devices can send data at the same time with no issues.
- 13:47So remember this, Routers transmit data on pins 1 and 2, and receive data on pins 3 and
- 13:556.
- 13:56This is the same as a PC.
- 13:59Once again, switches are the opposite, they receive data on pins 1 and 2 and transmit
- 14:05data on pins 3 and 6.
- 14:08When connecting a PC to a switch, or a Router to a switch, this works fine.
- 14:15Because they transmit and receive on opposite pin pairs, a regular cable like this works
- 14:20well.
- 14:21This kind of cable, by the way, is called a straight-through cable.
- 14:26Remember, a copper Ethernet cable has two RJ-45 connectors, one on each end.
- 14:33This kind of a cable is called a ‘straight through’ cable because pin 1 on one end
- 14:38connects straight through to pin 1 on the other end.
- 14:41Pin 2 connects to Pin 2, Pin 3 connects to Pin 3, etc.
- 14:47Now, in networks we don’t always connect PC to switch, switch to router.
- 14:53What if we want to connect a router to another router?
- 14:56Or maybe a switch to another switch?
- 14:58Or maybe connect two PCs together?
- 15:01Now I’ve replaced the switch on the right with another router.
- 15:06What will happen if the router on the left sends data to the router on the right?
- 15:11Well, it’s simply not going to work.
- 15:15The right router isn’t prepared to receive data on pins 1 and 2 of its interface,
- 15:19so communication between the two routers just doesn’t happen.
- 15:23So, how can we successfully connect two routers together?
- 15:27Or perhaps two switches, or two PCs.
- 15:31The same thing applies to connecting a PC directly to a router, also, because they both
- 15:35transmit data on pins 1 and 2, and receive data on pins 3 and 6.
- 15:41Let’s take a look.
- 15:42I’ve replaced the two routers with two switches, just to demonstrate that the same thing applies.
- 15:49If the switch on the left tries to transmit some data to the switch on the right it doesn’t
- 15:55work.
- 15:56The answer to this problem is a different type of cable.
- 16:00A straight-through cable connects pin 1 to pin 1, pin 2 to pin 2, pin 3, to pin 3, etc.
- 16:08But there’s another type of cable, called a crossover cable.
- 16:13In a crossover cable, a pin on one end of the cable doesn’t connect straight to the
- 16:18same pin on the other end.
- 16:20Essentially, the pairs are reversed on each end.
- 16:23So, pin 1 on one side connects to
- 16:26Pin 3 on the other side.
- 16:28And pin 2 on one side connects to
- 16:31Pin 6 on the other side.
- 16:33As you can see, the two pairs, 1 and 2, and 3 and 6, are reversed.
- 16:39Then, pair 3 on the left side will connect to Pin 1 on the right side.
- 16:44And pin 6 on the left side will connect to pin 2 on the right side.
- 16:49The wires are ‘crossed over’ each other, hence the name ‘crossover cable’.
- 16:54The transmit pins on one side are connected to the receive pins on the other side, so
- 17:00now the two devices can send data to each other with no problems.
- 17:04Here’s another example.
- 17:07Again, the network interface card on a PC and the network interfaces on a router both
- 17:12transmit data on pins 1 and 2 and receive data on pins 3 and 6, however if you connect
- 17:19them together with a crossover cable, they will be able to exchange data with no issues.
- 17:25Here’s a chart reviewing different device types and the pins they use to transmit and
- 17:31receive data
- 17:34Routers transmit data on Pins 1 and 2, and receive data on pins 3 and 6.
- 17:40Firewalls are the same as routers, they transmit data on Pins 1 and 2 and receive data on pins
- 17:473 and 6.
- 17:50PCs also transmit data on Pins 1 and 2, and receive data on pins 3 and 6.
- 17:57Switches are the only different one of the group.
- 18:00Switches transmit data on pins 3 and 6, and receive data on pins 1 and 2.
- 18:06Try to remember these.
- 18:08The flashcards included in the description will help with this, so I recommend that you
- 18:11use them!
- 18:12While all of that is important information to know, and can cause issues in networks
- 18:19even in the modern day, the truth is that most modern networking devices have evolved
- 18:24beyond having to worry about straight-through or crossover cables.
- 18:28That’s because newer networking devices include a feature called Auto MDI-X.
- 18:35Previously, if two switches were connected with a straight-through cable like this, they
- 18:40would be unable to communicate.
- 18:43However, Auto MDI-X allows devices to automatically detect which pins their neighbor is transmitting
- 18:49data on, and then adjust which pins they use to transmit and receive data.
- 18:55They can then exchange data normally.
- 18:58So, unless you’re working with network equipment that is quite old, you don’t really have
- 19:03to worry about straight-through and crossover cables.
- 19:06But this is good information to be aware of, and it’s also good to learn about the concept
- 19:11of auto MDI-X, both for the exam and for real world networking.
- 19:16So, we’ve talked a lot about 10BASE-T and 100BASE-T, but what about the higher speed
- 19:22copper ethernet cables?
- 19:24Remember, I said before that for gigabit ethernet and 10 gigabit ethernet, all 8 wires are used.
- 19:32The last two pairs are 4 and 5, and 7 and 8.
- 19:38Again, there will be flashcards to help you remember these details.
- 19:41It may seem like a lot to memorize, but if you use the flashcards properly its amazing
- 19:46how easy it is to remember all of these things.
- 19:49Now, here’s another big difference between 1000baseT and 10GBASE-T, and 10base-t and
- 19:57100-base-t.
- 20:00In addition to using all four pairs of wires, in 1000base-T and 10Gbase-T, each pair is
- 20:06bidirectional, meaning each pair isn’t dedicated specifically to transmitting data or receiving
- 20:12data.
- 20:14This is part of the reason that they can operate at much faster speeds.
- 20:18Okay, we’ve covered a lot about connections using copper UTP cables.
- 20:24But there is a newer technology that is superior in many ways.
- 20:28For example, copper UTP wiring can be used for up to 100 meters.
- 20:33that’s usually plenty within a LAN, but how about for larger networks?
- 20:38Look at this Cisco switch here.
- 20:40Here it has 24 ports for RJ45 connectors.
- 20:46These are the ports you would connect a copper UTP cable to.
- 20:49But what about these four interfaces?
- 20:53Take a look at this Cisco router also.
- 20:56It only has four RJ45 ports.
- 20:59The rest of them look like those other four ports on the switch.
- 21:02In these interface you insert one of these
- 21:06It’s called an SFP transceiver.
- 21:10SFP means small form-factor pluggable.
- 21:14So you insert one of these into the device, but still things aren’t complete.
- 21:20What kind of cable connects to one of these?
- 21:23You connect one of these cables.
- 21:26This is a fiber optic cable.
- 21:28Rather than an electrical signal over copper wiring, these cables send light over glass
- 21:34fibers.
- 21:36Notice that there are two connectors on each end.
- 21:39That’s because you need one connector to transmit data, and one to receive data, on
- 21:43each end.
- 21:46The copper UTP cables used separate wire pairs within the cable to transmit and receive data.
- 21:52The fiber-optic cables instead use separate cables to transmit and receive, like this.
- 21:58Of course, ‘transmit’ on the left connects to ‘receive’ on the right, and ‘transmit’
- 22:03on the right connects to ‘receive’ on the left.
- 22:08Now let’s examine the structure of the cable itself.
- 22:11There are four numbered parts in this diagram, from the center to the outer layer.
- 22:17Number 1 is the fiberglass core itself.
- 22:20Light is transmitted down this core to transmit data from one device to another.
- 22:26Number 2 is cladding that reflects light,
- 22:29Number 3 is a protective buffer, which protects the fiberglass from breaking
- 22:37and number 4 is the outer jacket of the cable.
- 22:40Now there are a couple main types of fiber-optic cables.
- 22:44single-mode fiber, and
- 22:45multimode fiber.
- 22:47Let’s check out their characteristics and differences.
- 22:52These are two examples of multimode fiber cables.
- 22:56The center represents the fiberglass core, and the blue represents the reflective cladding
- 23:01that reflects light down the cable.
- 23:03In multimode fiber cable, the core, the actual glass fiber, is wider than single mode fiber.
- 23:13This wider core allows multiple angles, known as modes, of lightwaves to enter the fiber
- 23:18glass core, as you can see in these two diagrams.
- 23:22Notice the red and black lines representing light waves travelling down the fiberglass
- 23:26core, reflecting off the cladding at different angles.
- 23:31Multimode fiber allows longer cables than UTP, which are limited to 100 meters, but
- 23:37still shorter than single-mode fiber, which we will look at next.
- 23:42Multimode fiber cables are cheaper than single-mode fiber, and this is because they use cheaper
- 23:47transmitters, which are often LED-based.
- 23:51This is an example of a single-mode fiber cable.
- 23:54Again, the center represents the fiberglass core, and the blue represents the reflective
- 23:59cadding.
- 24:02The core diameter of a single-mode fiber cable is narrower than a multimode fiber, meaning
- 24:06the glass fiber is thinner.
- 24:09You can notice this in the diagram here, compared to the multimode fiber diagrams.
- 24:15Light enters at a single angle, known as a mode, from a laser-based transmitter.
- 24:21Notice in the diagram that the light wave travels straight down the core of the cable.
- 24:26Single-mode fiber allows longer cable lengths than both UTP and multimode fiber cables.
- 24:32And single-mode fiber cables are more expensive than multimode fiber cables due to the more
- 24:37expensive laser-based transmitters used.
- 24:39Okay, now let’s look at some standards for fiber-optic cables like we did with UTP cables.
- 24:46Here’s another chart like the one we looked at for copper UTP cable standards, this time
- 24:51for fiber-optic cables.
- 24:55First up is a standard for 1 gigabit ethernet over fiber, known as 1000BASE-LX.
- 25:02It is defined in the IEEE 802.3zed, or zee, standard.
- 25:07This standard can be used over single-mode or multimode fiber cables, and you can see
- 25:11the difference in the maximum cable lengths, 550 meters for multimode fiber, and 5 kilometers,
- 25:18or 5000 meters, for single mode fiber.
- 25:22Next up is 10GBASE-SR, defined in the 802.3ae standard, which operates at 10 gigabits per
- 25:30second.
- 25:32It uses multimode fiber and can support cable lengths up to 400 meters.
- 25:38Next is 10GBASE-LR, also defined in the 802.3ae standard, again operating at 10 gigabits per
- 25:45second.
- 25:4710GBASE-LR, however, uses single-mode fiber, and cables lengths can be up to 10 kilometers.
- 25:55Finally 10GBASE-ER, also part of the 802.3ae standard, and operating at 10 gigabits per
- 26:02second.
- 26:03It supports cable lengths even longer than 10GBASE-LR, with distances up to 30 kilometers
- 26:09possible over a standard connection.
- 26:13This is just a sample of fiber-optic standards, there are plenty more.
- 26:17I will include flashcards to help you remember these standards, but to be honest I doubt
- 26:22you’ll be asked questions about specific details about the standards on the exam, but I don’t know
- 26:27for sure.
- 26:28However, with the flashcards it’s quite easy to remember little facts like these,
- 26:33so I recommend not deleting those flashcards, but that’s your choice of course.
- 26:37Finally, let’s review by comparing UTP cabling and Fiber-optic cabling, starting with UTP.
- 26:46Copper UTP cables are cheaper than fiber-optic cables.
- 26:51Maximum cables distances for UTP cables are shorter, about 100 meters maximum.
- 26:56UTP cables can be vulnerable to electromagnetic interface, or EMI, although the twist in the
- 27:03cable pairs helps to protect against this.
- 27:05The RJ45 ports to which UTP cables connect are cheaper than the SFPs used for Fiber-optic
- 27:12connections
- 27:13Also, UTP cables emit, or leak, a faint signal outside of the cable, which could possibly
- 27:21be detected and used to copy data, posing a possible security risk.
- 27:26Now let’s look at fiber-optic cables.
- 27:30Fiber-optic cables are more expensive than UTP cables
- 27:32They support longer distances than UTP cables.
- 27:37Their SFP ports are more expensive than RJ45 ports, and single-mode fiber ports are more
- 27:43expensive than multimode.
- 27:45They do not emit any signal outisde of the cable, so there is no security risk there.
- 27:51Okay, so we covered a lot of information, but I want to remind you of the supplementary
- 27:57materials for the video that will help you remember what you learned.
- 28:02Like in the last video, there will be an end-of-video quiz starting from the next slide.
- 28:08Also, I have made a deck of flashcards to help you review the information covered in this video,
- 28:14check the link in the description to download them.
- 28:17And there will also be a practice lab using Packet Tracer, which will be released as a
- 28:22separate video.
- 28:23Okay, let’s get started with the quiz.
- 28:27Quiz question 1.
- 28:29You connect two old routers together with a UTP cable, however data is not successfully
- 28:34sent and received between them.
- 28:36What could be the problem?
- 28:39A, they are connected with a straight-through cable.
- 28:43B, they are connected with a crossover cable.
- 28:48or C, they are operating in auto MDI-x mode.
- 28:52Pause the video to think about your answer.
- 28:58The answer is A, they are connected with a straight-through cable.
- 29:02let’s check each of the possible answers.
- 29:07A crossover cable is not the issue.
- 29:10In fact, a crossover cable would likely fix the issue.
- 29:14Because both routers transmit data on pins 1 and 2, a crossover cable is necessary to
- 29:18properly connect the transmit pins on one side to the receive pins
- 29:23(3 and 6) on the other side.
- 29:26Modern devices with Auto MDI-X enabled don’t have this issue, but it is possible that the
- 29:31old routers do not have Auto MDI-X.
- 29:34So, b, they are connected with a crossover cable, is incorrect.
- 29:39Auto MDI-X allows devices to detect which pins and wires their neighbors are using to
- 29:44transmit and receive data, and adjust their own operations to match.
- 29:49Actually, Auto MDI-X would likely fix this issue, but since the routers are old they
- 29:55might not have the Auto MDI-X function.
- 29:57So, c, They are operating in Auto MDI-X mode, is incorrect.
- 30:04On old devices without Auto MDI-X, a straight-through cable cannot be used to connect devices of
- 30:09the same type.
- 30:11A crossover cable is necessary.
- 30:13So a, they are connected with a straight-through cable, is the best answer. Quiz question 2.
- 30:22Your company wants to connect switches in two separate buildings that are about 150
- 30:27meters apart.
- 30:29They want to keep costs down, if possible.
- 30:32What kind of cable should they use?
- 30:34A, UTP.
- 30:37B, Single-mode fiber, or C, multimode fiber.
- 30:43Pause the video to think about your answer.
- 30:49The answer is C, multimode fiber.
- 30:52Let’s check.
- 30:55Although UTP would keep the costs down, it does not support distances over 100 meters.
- 31:01So A, UTP, is incorrect.
- 31:06Although single-mode fiber supports distances much longer than 150 meters, it is more expensive
- 31:11than multimode fiber.
- 31:13So b, single-mode fiber, is not the best answer.
- 31:19Multimode fiber supports distances over 150 meters and is less expensive than single-mode
- 31:25fiber.
- 31:26So C, multimode fiber, is the best answer.
- 31:29Let’s go on to question 3.
- 31:33Your company wants to connect two offices that are about 3 kilometers apart.
- 31:38They want to keep costs down if possible.
- 31:41Which kind of cable should they use?
- 31:43A, UTP, B, single-mode fiber, or C, multimode fiber.
- 31:52Pause the video to think about your answer.
- 31:59The answer is b, single-mode fiber.
- 32:01Let’s check the answers.
- 32:05Although UTP keeps costs down, it does not support distances of 3 kilometers.
- 32:10So A, UTP, is incorrect.
- 32:14Although multimode fiber is cheaper than single-mode fiber, it also does not support distances of 3
- 32:20kilometers.
- 32:21So c, multimode fiber, is incorrect.
- 32:26Many single-mode fiber standards support cable lengths much longer than 3 kilometers.
- 32:32Although single-mode fiber is more expensive than the other options, it is necessary in
- 32:36this case.
- 32:37So B, multi-mode fiber, is the best answer.
- 32:43A switch has the following indication over its network interfaces: What would happen
- 32:48if you connect it to an identical switch with a straight-through cable?
- 32:52A, they would operate normally.
- 32:56B, they would operate at a reduced speed.
- 33:00or C, they would be unable to communicate.
- 33:05Pause the video to think about your answer.
- 33:11The answer is a, they would operate normally.
- 33:14Let’s check.
- 33:16They would not operate at a reduced speed.
- 33:19The ports are Auto MDI-X enabled.
- 33:22However, even if they didn’t have Auto MDI-X, they wouldn’t operate at a reduced speed.
- 33:27They simply wouldn’t operate.
- 33:30So b, they would operate at a reduced speed, is incorrect.
- 33:36Because the ports are Auto MDI-X enabled, they would be able to communicate, even though
- 33:41they are connected with a straight-through cable.
- 33:43So c, they would be unable to communicate, is incorrect.
- 33:49Because the ports are Auto MDI-X enabled, they would operate normally, regardless of
- 33:54whether they are connected with a straight-through or a crossover cable.
- 33:58So a, they would operate normally, is the correct answer.
- 34:02Let’s go to the final quiz question for this video.
- 34:07Your company needs to connect many end hosts to a switch which is in a wiring cabinet on
- 34:12the same office floor as the hosts.
- 34:15What kind of cable should they use? a, UTP.
- 34:20b, single-mode fiber, or C, multimode fiber.
- 34:26Pause the video to think about your answer.
- 34:32The answer is a, UTP.
- 34:35Let’s check the answers.
- 34:38Most hosts do not have the capability to connect to a switch via fiber cabling, and most switches
- 34:44do not have enough SFP interfaces to support many hosts.
- 34:48So b, single-mode fiber, and c, multimode fiber, are inorrect.
- 34:53UTP cables are the standard for wired connections to switches.
- 34:59Switches typically have many RJ45 ports for end hosts to connect to, and end hosts will
- 35:04have an RJ45 port on their network interface card to connect a UTP cable to.
- 35:10So a, UTP, is the correct answer.
- 35:15Thank you for watching.
- 35:18That's all for this video.
- 35:20If you want to show your support, please subscribe to the channel, like the video, leave a comment,
- 35:25and share the video with anyone else studying for the CCNA.
- 35:29I accept donations via cryptocurrency or Patreon via the links in the description.
- 35:34I'm also a Brave verified publisher and accept BAT, or Basic Attention Token, tips via the
- 35:41Brave browser.
- 35:43Click the link in the description to check out Brave, a fast and sleek browser that pays
- 35:47you to surf the Internet.
- 35:49That's all for now.
About this transcript
This page contains the full transcript of Free CCNA | Interfaces and Cables | Day 2 | CCNA 200-301 Complete Course by Jeremy's IT Lab, generated from the public captions YouTube serves with the video. The transcript has 4,991 words across 489 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.