YouTube2Text

Finally, Manufacturers are Listening!: Quick Mill Pop Up Review — Transcript

by Lance Hedrick · 6,592 words · 924 segments · language en · Watch on YouTube

Full transcript

  1. 0:00This video is brought to you by
  2. 0:02Squarespace.
  3. 0:04What's up everyone? Lance Hedrickk here
  4. 0:06and this is the QuickMill Popup.
  5. 0:12Now, this machine came out about a year
  6. 0:14ago or so in Europe and has made its way
  7. 0:16to the US at a really attractive price
  8. 0:18point of under €1,000. I believe it just
  9. 0:21went over a,000 in the US due to tariffs
  10. 0:23and imports, but it's still at a really
  11. 0:25nice price point for that proumer level.
  12. 0:28And it's something that honestly didn't
  13. 0:30really catch my eye. Didn't really pay
  14. 0:32much attention to it until the past few
  15. 0:34months where my comments have been
  16. 0:36littered with people asking me to review
  17. 0:38it. So about a month and a half or 2
  18. 0:40months ago, I ended up purchasing one
  19. 0:42and uh here it is. I got it for about
  20. 0:44€850 and free shipping. So not too bad
  21. 0:47of a price right there. Quick is a
  22. 0:50company based out of Italy that are
  23. 0:52known for producing really high quality
  24. 0:54machines. They are similar to that of
  25. 0:56like Profitex ECM and kind of like
  26. 0:59Lolite. I would say they sit kind of in
  27. 1:00between those two. They put out this and
  28. 1:03another one called a pop-up that has a
  29. 1:04thermal block inside in the last year.
  30. 1:08So, this is a single boiler machine that
  31. 1:11also has a really handy
  32. 1:14pressure control valve right here. That
  33. 1:16is a very enticing element and something
  34. 1:19I was excited to take a look at when I
  35. 1:20heard that it had that out of the box.
  36. 1:23Now, of course, it's going against
  37. 1:24things in a much cheaper price range,
  38. 1:26like the Turin Legato, which is around
  39. 1:28$500, and that has an external OPV
  40. 1:30adjustment that you can play around
  41. 1:32with, as well as a starting flow kind of
  42. 1:35control mechanism on it as well. But
  43. 1:38this has something a little bit more and
  44. 1:40is with a bit more of a mainstay company
  45. 1:42as opposed to, you know, buying a
  46. 1:44rebranded machine from Turin or Mi
  47. 1:46Coffee or something along those lines.
  48. 1:49It is a compact machine, slightly
  49. 1:51smaller than the Profite Go, slightly
  50. 1:53larger than the Lilite Victoria, and
  51. 1:55fits really nicely on a lot of counters.
  52. 1:58Something I was really excited about
  53. 2:00when I got this machine out of the box
  54. 2:02is the water fill is not in the back.
  55. 2:05For those of you that put this
  56. 2:06underneath a cabinet, the water fill is
  57. 2:08actually right here on the side. Love
  58. 2:10that. It's not a big tank, which
  59. 2:12actually I'm a fan of. I don't want
  60. 2:14water sitting in a machine cold for days
  61. 2:17and days and days on end. Kind of gets a
  62. 2:19little bit gross the water kind of just
  63. 2:20sitting there stagnating. I want to be
  64. 2:22able to replenish it with fresh water
  65. 2:23often. So, I would recommend still not
  66. 2:26overfilling your water tank and allowing
  67. 2:28it to be replenished more often than
  68. 2:29not. You can also see the fill level
  69. 2:31right here, which is nice. You don't
  70. 2:33need to kind of look at a little bitty,
  71. 2:35you know, fill level indicator on the
  72. 2:37machine that's uh, you know, connected
  73. 2:39to the reservoir in the back. It's right
  74. 2:40there on the side. Just a little glance
  75. 2:42to the side of your machine. you know,
  76. 2:43if you need to fill it up or not.
  77. 2:45Another thing that I love again about
  78. 2:46this water fill is it is not the bottom
  79. 2:49fill, meaning there's no valve on the
  80. 2:51bottom where it's intaking it. Now, this
  81. 2:53is a popular decision for a lot of
  82. 2:54espresso machines nowadays, and it's a
  83. 2:56decision I don't actually love. I'm not
  84. 2:58a fan of bottom filling, and the reason
  85. 3:00for that is because the gasket can wear.
  86. 3:03It can become crooked. The the
  87. 3:04connection between the water tank and
  88. 3:06the actual machine itself, and these
  89. 3:08things can cause leaks, it can cause
  90. 3:10issues. It's just not as clean and it's
  91. 3:12not as reliable. This one has tubes that
  92. 3:15go into it and suck it right on into the
  93. 3:17machine. I much prefer this. It's a much
  94. 3:20easier thing to to rely on. You're not
  95. 3:22going to have to worry about putting it
  96. 3:23in the proper way, not worrying about
  97. 3:25putting it in at a funky angle, not
  98. 3:27worrying about a full flush connection.
  99. 3:28You just toss in those tubes and you're
  100. 3:30good to go. If the tubes do ever wear
  101. 3:32out, they're very cheap and easy to
  102. 3:33replace.
  103. 3:35Something else that's small, but I do
  104. 3:37love the plug. It's not a plug that is
  105. 3:40permanently in the machine like on the
  106. 3:41Profet Go for instance. It has a plug,
  107. 3:44the three-prong plug that you can take
  108. 3:46in and put out and you can have a clean
  109. 3:48machine that you put away for storage
  110. 3:49without a pesky plug. I think every
  111. 3:51machine should have, but I'm just happy
  112. 3:53this one has it. We also obviously have
  113. 3:55a pressure gauge right here. This
  114. 3:56measures your back pressure. We'll see
  115. 3:58inside where that's actually connected
  116. 4:00at, but it does measure back measure
  117. 4:01back pressure. Then we have three simple
  118. 4:03buttons on the front. We have a brew
  119. 4:04actuating switch which doubles as the
  120. 4:07enter menu switch. When you hold this
  121. 4:08down, the menu pops up on this little
  122. 4:10screen here. We have a steam switch and
  123. 4:13we have a hot water switch. So, because
  124. 4:15this is a single boiler, it is a brass
  125. 4:17boiler, insulated brass. Whenever you
  126. 4:20want to go to steam mode, you do have to
  127. 4:21click this in order for the heating
  128. 4:23element to turn on at a higher level.
  129. 4:25And the P controller is programmed
  130. 4:27differently to hit a higher temperature.
  131. 4:29So, you click this on, 30 to 40 seconds
  132. 4:31later, you have a pressurized boiler
  133. 4:32ready to steam milk with your steam wand
  134. 4:34right over here. Then down here, you
  135. 4:36have the hot water button. This you
  136. 4:38don't need to have the steam boiler set
  137. 4:39to. You can just click this, open your
  138. 4:41steam wand, and hot water will come out
  139. 4:43of the steam wand. I know that's not a
  140. 4:45very popular decision, having it come
  141. 4:46out of the steam wand. It is a much
  142. 4:48smaller stream. There's only two holes
  143. 4:50on this steam tip. So, it comes out and
  144. 4:52it's kind of like the seam wand's
  145. 4:53peeing, uh, which is a little funny as
  146. 4:55opposed to having like a hot water
  147. 4:56spigot. That being said, it's one less
  148. 4:59area to clean, one less area to have
  149. 5:00scale on. A lot of people don't ever
  150. 5:02think about their hot water spigot and
  151. 5:04it scales up. People tend to clean their
  152. 5:06steam wand quite often, or they should
  153. 5:08with Renza or something, and that helps
  154. 5:10keep that really clean. Uh, but it does
  155. 5:12look a little funny coming out of it.
  156. 5:13And also, if you have a big diner mug or
  157. 5:15something that you want to fill up with
  158. 5:17an Americano, you're not really going to
  159. 5:19be able to get this into it without
  160. 5:20tilting and potentially spilling out
  161. 5:22your your coffee when you're done
  162. 5:23filling it up with water. It is on a 360
  163. 5:26ball joint, but it doesn't go up very
  164. 5:28high, which you'll see later does affect
  165. 5:30the steaming performance when you want
  166. 5:31to use a big jug. You really need to
  167. 5:33stay with smaller jugs unless you have
  168. 5:35this on the edge of a table where you
  169. 5:36can get a little bit lower or if you
  170. 5:38have this on a platform. Uh, for
  171. 5:39instance, if you have one of those
  172. 5:40knockbox kind of platforms that you set
  173. 5:43this on, that can give you a little
  174. 5:44extra clearance. But you also see this
  175. 5:46little tab. Now, this tab is what
  176. 5:48controls a valve inside which controls
  177. 5:50your pressure. And it's a very
  178. 5:52responsive pressure control. This
  179. 5:54machine comes out at 8 ml a second,
  180. 5:57which is a really fast water debit for a
  181. 5:59lot of these vibratory machines,
  182. 6:00especially when you have a dampening
  183. 6:02vibratory pump. Now, what I mean by that
  184. 6:04is vibratory pumps are typically very
  185. 6:06loud, most notably in something like the
  186. 6:08decent espresso machine where it goes.
  187. 6:11There are more silent OLAB pumps like
  188. 6:14the one in some of the elite machines,
  189. 6:16but in order to make them silent, they
  190. 6:18reduce the noise by simply lowering the
  191. 6:21the the flow rate. So you get a really
  192. 6:22low flow rate coming out of it. The
  193. 6:24downside of that is that your puck fill
  194. 6:27is going to be much slower. Now I have
  195. 6:29preached many times in many videos the
  196. 6:31the advantages of a much faster puck
  197. 6:34fill rate. And so having an 8 to 8 1/2
  198. 6:36mill a second while still having kind of
  199. 6:38that silent technology I think is a big
  200. 6:41plus. Now you're still going to hear the
  201. 6:42pump. It's a vibratory pump, but it is
  202. 6:45kind of their patented silent
  203. 6:46technology, which does help a lot to
  204. 6:48dampen the noise without sacrificing
  205. 6:51water debit.
  206. 6:53I understand that people love doing
  207. 6:55mirror finish, and it does look really
  208. 6:56nice when it's clean, but right when you
  209. 6:58get a smudge on it, that is the most
  210. 7:01irksome thing in the world. You have a
  211. 7:03smudge right in the middle when you're
  212. 7:04trying to look at your face on this
  213. 7:06massive space. There's this big old
  214. 7:07Squarespace is the sponsor of today's
  215. 7:10video. Thank you, Squarespace. Now,
  216. 7:11Squarespace, if you're unaware, which
  217. 7:13you shouldn't be unaware, but if you
  218. 7:15are, it's an awesome online tool that
  219. 7:17helps you build a website or helps you
  220. 7:19build a web store, helps you share your
  221. 7:21thoughts, your ideas, your innovations
  222. 7:23with the world. Now, I have been using
  223. 7:24Squarespace for quite a long time, ever
  224. 7:26since I launched my own personal
  225. 7:28website. You get on there, they have
  226. 7:30these pre-built designs that are
  227. 7:32gorgeous, aesthetically pleasing, easy
  228. 7:34to navigate, and guess what? I am
  229. 7:36someone that has smudges on my face all
  230. 7:38the time, yet I can make a website on
  231. 7:40there because how intuitive it is. It
  232. 7:41literally is like, "You want to put a
  233. 7:43title here? Just click it and type it
  234. 7:45in. Oh, you want to change the font?
  235. 7:46Okay, just click font and change the
  236. 7:48font." There's no coding. There's no
  237. 7:50crazy matrix crud going on. 011.
  238. 7:54You can also put a Webster on there and
  239. 7:55you can chat your with community on
  240. 7:56there. So, you've got an all-in-one
  241. 7:58built storefront right there. All you
  242. 8:00got to do right now, run to the caption
  243. 8:03below or in this actual frame and you
  244. 8:06get to squarespace.com/lancehedrick
  245. 8:08and you get 10% off your first domain
  246. 8:10purchase. And I highly recommend that
  247. 8:11you do that because it's time for you to
  248. 8:14break free and to share your thoughts
  249. 8:16with the world, your innovations, your
  250. 8:17creations, your 3D printed things for
  251. 8:19coffee. People need those and you need
  252. 8:21to share it with them. And the best way
  253. 8:23to do that is through Squarespace. So,
  254. 8:24thank you Squarespace for sponsoring
  255. 8:26today's video. Make sure you check out
  256. 8:27that link down below and let's continue
  257. 8:29on with the video. Now, I know I was
  258. 8:31complaining about the smudge, but it
  259. 8:32does come in black, so I guess I can't
  260. 8:34complain too much. I picked my poison,
  261. 8:35but let's continue on anyway. Then, we
  262. 8:38actually have quite a nice steam wand
  263. 8:39over here that has a wooden accent, and
  264. 8:41it feels pretty good to turn. Now, this
  265. 8:43is different from something like the
  266. 8:44Elite Victoria, which has an awful
  267. 8:46plastic steam knob. I hate it. Uh, but
  268. 8:48this one is pretty nice. Now, in
  269. 8:51addition to all of that, we have
  270. 8:52obviously a 58mm PA filter. the the
  271. 8:55group heads for 58 millimeter which is a
  272. 8:56more standard size. I wish it wasn't but
  273. 8:59it is and a lot of people love that so I
  274. 9:00can't knock it for that because I can't
  275. 9:03do that. It has the center screw on the
  276. 9:05screen down below so it's not like an
  277. 9:06E61. It is flush so it doesn't kind of
  278. 9:08protrude down like some Lamar Zokos do
  279. 9:10which is a bit annoying for your uh
  280. 9:12tamped puck. Let's put some cups under
  281. 9:15here. So we have a naked PA filter. This
  282. 9:17fits
  283. 9:20that fits with a lot of clearance.
  284. 9:21That's obviously a little dimas cup fits
  285. 9:23really well. This is a bigger type of
  286. 9:25cup and it does fit right. But if we put
  287. 9:27on the stock spouted porta filters and
  288. 9:30the clearance becomes a whole lot less.
  289. 9:32So as you see can't even fit this little
  290. 9:35espresso cup unless you hook it
  291. 9:37underneath it. No chance.
  292. 9:41Little dimass just barely fits. And
  293. 9:44there's no chance of this. Remove the
  294. 9:45scale. You can kind of fit that
  295. 9:47underneath. But let's see what else this
  296. 9:49machine comes with.
  297. 9:52You get a singleshot kind of basket. Not
  298. 9:56as nice as I would like. I like the step
  299. 9:58downs that like you can get from like
  300. 10:00VST or Lomar Zoko or something. Comes
  301. 10:02with a blank basket to back flush your
  302. 10:04machine, which you should be doing. And
  303. 10:06then the fun stuff. Come on. No one's
  304. 10:09spending a,000 bucks and using a plastic
  305. 10:10scoop. I'm sure there's going to be like
  306. 10:12three people in the comments saying,
  307. 10:13"Yes, I do." But you're representative
  308. 10:14of such a tiny population. This is like
  309. 10:16why? Why?
  310. 10:20This is actually a helpful thing. This
  311. 10:21helps with cleaning. Definitely
  312. 10:22necessary. I have like 40 now, but if I
  313. 10:24didn't, it would be something I would
  314. 10:25want to have. But then one of the things
  315. 10:27that I absolutely despise. Now,
  316. 10:30this is something I just don't
  317. 10:31understand why you would even add it.
  318. 10:34Plastic tamper. You spend $1,000 on a
  319. 10:38machine and you get a plastic tamper.
  320. 10:39Now, I I've heard I've heard arguments.
  321. 10:41Some people are like, "Yeah, it's to
  322. 10:42like hold you over till you get your own
  323. 10:44tamper." Yeah, cuz no one's using this
  324. 10:45in perpetuity. That's ridiculous. And
  325. 10:47some people say, "I would rather them do
  326. 10:49that because it's less cost on the
  327. 10:51machine and I wouldn't want to use their
  328. 10:52tamper anyway. I want a self-leveling
  329. 10:54tamper." I get that, too. But I would
  330. 10:56say most people buying their machines
  331. 10:58are not buying their own tampers. And so
  332. 11:00to have an extra, it would cost what,
  333. 11:02eight bucks to make a stainless steel
  334. 11:04machine like manufactured, add $10 to
  335. 11:06machine if you really need to make an
  336. 11:07extra little margin there and put like a
  337. 11:09stainless steel tamper in there. Just
  338. 11:10stainless steel head with like a wooden
  339. 11:12handle. It's not very expensive to
  340. 11:14manufacture that. I know it's not. This
  341. 11:15is uh an insult. Okay. And it it's not
  342. 11:18even finished. Well, it's like it's it's
  343. 11:21it's come on. And you branded it. You're
  344. 11:23proud of that. Get out of here with
  345. 11:26that.
  346. 11:27And then it comes with its PA filter.
  347. 11:29Fine. You know, it's got a plastic
  348. 11:30handle. That's fine. I'm not really that
  349. 11:32upset about it because But a plastic
  350. 11:34tamper, come on. That's that's just
  351. 11:37uncalled for. Now, the baskets, at least
  352. 11:39in the one I bought, are not great. I
  353. 11:41read online that some people were
  354. 11:42speculating that it might come with IMS
  355. 11:44baskets or something, but uh it does
  356. 11:46not. Now, these baskets are not bad. Um
  357. 11:49I don't I'm not a big fan of the shape
  358. 11:51as much, but um they're not bad. Um they
  359. 11:54just look like they have a rough finish,
  360. 11:56which is uh not great for cleaning and
  361. 11:58getting coffee oils all in it. Uh
  362. 12:00they're kind of rough, but they're not
  363. 12:02bad baskets. They're better than what
  364. 12:03I've seen in like the Ranchilio stock,
  365. 12:05so that's a good thing.
  366. 12:11Being a single boiler, it could either
  367. 12:13have pretty nice thermal stability or
  368. 12:15pretty hit or miss thermal stability.
  369. 12:16Kind of like with a Gaja Classic Pro or
  370. 12:19Renilio Sylvia or the like. It is P
  371. 12:21controlled though, so it better beat the
  372. 12:23Sylvia in the Gaja Classic Pro or we
  373. 12:25have some issues.
  374. 12:27I've seen lots of anecdotes that people
  375. 12:28can taste the difference between a half
  376. 12:30degree change, which just isn't true
  377. 12:31because no machine is good enough to
  378. 12:34maintain within half a degree. That's
  379. 12:36just it's it it just doesn't matter as
  380. 12:39much as people think. I do not do the
  381. 12:41World Barista Championship uh standard
  382. 12:44deviation method of measuring machine
  383. 12:47temperature. And that's because I don't
  384. 12:49think that means anything. I don't think
  385. 12:50that's going to translate to a better
  386. 12:51cup. I think if we see wild swings where
  387. 12:53one shot starts at 93 and the next one
  388. 12:55starts at 85, sure that's an issue. But
  389. 12:59if a machine is set to 93 and it's at 91
  390. 13:0292 throughout the shot, I think that's
  391. 13:05absolutely fine in my book. I think
  392. 13:06that's just as good as a machine that
  393. 13:08does 93 the whole way. This is coming
  394. 13:09from over a decade of of not being just
  395. 13:12a professional brief where I'm going
  396. 13:13around and and training people and
  397. 13:15helping with competitors, but testing
  398. 13:17hundreds of machines and tasting
  399. 13:19hundreds of machines and doing
  400. 13:20temperature taste tests. Instead of
  401. 13:22calling for manufacturers to upcharge
  402. 13:25their machine for stellar thermal
  403. 13:27stability performance, we should instead
  404. 13:29have them add things like simple flow
  405. 13:32control, pressure control, simple things
  406. 13:34that should not cost any money and just
  407. 13:36toss a P controller on it. It doesn't
  408. 13:38need to be the most insane algorithmic
  409. 13:40setup you've ever seen and tested in
  410. 13:42your life. It just needs to be good.
  411. 13:45What I'm going to do is the first one
  412. 13:46will just be kind of a flush to heat up
  413. 13:47this case. And then we'll just take a
  414. 13:49look. It's set at 93° what it was out of
  415. 13:51the box. We're just going to kind of go
  416. 13:52with it.
  417. 14:00Well, already we're at 92.2.
  418. 14:03Guess we didn't need a flush. I did run
  419. 14:04some earlier, but it was sitting there
  420. 14:06getting cool. 915 913 we're at 18
  421. 14:10seconds. 911 and this was with a not
  422. 14:13super hot case. It was at like 40
  423. 14:15degrees as you saw. 915. It's doing the
  424. 14:18little P undulations.
  425. 14:20Going back up. We're at 30 seconds. Now
  426. 14:23remember this is a slower flow rate than
  427. 14:25what the end of your 30 secondond shot
  428. 14:27would be, right? This maintains a
  429. 14:29specific aperture throughout the whole
  430. 14:30shot, the case does. And so it's not as
  431. 14:33realistic as if you were to have a
  432. 14:35continuously increasing flow rate like
  433. 14:36an actual shot of espresso does. That's
  434. 14:38another reason I'm not a big fan of
  435. 14:40temperature testing in general is
  436. 14:42everyone uses essentially a a static
  437. 14:45aperture. That static aperture does not
  438. 14:47reflect real life espresso. Espresso
  439. 14:49starts with a slow flow rate then into a
  440. 14:51trickle and then into a stream and then
  441. 14:53at the end you're getting like crazy
  442. 14:55whipping much higher flow rates. Now, I
  443. 14:57do t like to use the TPD from Pado
  444. 15:00because you can open the valve, but this
  445. 15:02valve is not as controllable as I would
  446. 15:05like. You take a tiny turn and it can
  447. 15:07blast open. Also, there's no nothing to
  448. 15:10replicate a puck in here, so you kind of
  449. 15:11have to guess on putting water in there,
  450. 15:13making sure it's right temp, and it just
  451. 15:15it can get confusing. I I tend to use
  452. 15:17both in tandem, but So, let's do a
  453. 15:20second one.
  454. 15:21And we're already back up to about 91.
  455. 15:25Great.
  456. 15:2892.
  457. 15:29Again, it's at a constant flow rate. If
  458. 15:31it were gone faster, the temperature
  459. 15:32probably wouldn't get this high, but
  460. 15:34even still,
  461. 15:38we're at 30 seconds with a constant flow
  462. 15:40rate output. You can drill a hole into a
  463. 15:43basket and put a thermoprobe in there.
  464. 15:45It's going to cause channeling to that
  465. 15:46probe, though, and it's still going to
  466. 15:47give you a skewed reading. So, it's
  467. 15:48really difficult to get a super nice
  468. 15:51reading in puck during an extraction.
  469. 15:53It's just a difficult thing. Um, and I
  470. 15:56don't really have the setup for that.
  471. 15:57But anyway, we're going to do a third
  472. 15:58shot. After giving it a 40 second break,
  473. 16:00I just wanted to see what would happen
  474. 16:02when you're not going rapid succession.
  475. 16:04There you go. You're back to normal. So,
  476. 16:05I gave it like a 40 or 50 second break,
  477. 16:08we're back to normal without it
  478. 16:09skyrocketing. It seems to be if you're
  479. 16:11going super fast back to back to back to
  480. 16:13back to back and with really rapid
  481. 16:14succession, it will slowly trend
  482. 16:15upwards. But you give it 30 40 second
  483. 16:18break, which is a typical workflow,
  484. 16:20should be good to go.
  485. 16:26Now I'm going to measure the flow rate
  486. 16:28out of the group head. So I've got my
  487. 16:30press sensor app right here that will
  488. 16:31measure connected to a Bluetooth scale.
  489. 16:33There's nothing inside the machine
  490. 16:34that's doing this. It's just measuring
  491. 16:36the weight per second doing some
  492. 16:38calculations and showing it on a graph
  493. 16:39which we'll put on the screen. So let's
  494. 16:41go ahead and start it here. Start our
  495. 16:42shot. And the valve's fully open. We'll
  496. 16:45let it equalize at its full flow rate.
  497. 16:50All right. And then we'll start coming
  498. 16:51down.
  499. 16:52I'll give it a good quarter turn.
  500. 16:58All right, I'll give it another little
  501. 16:59quarter turn.
  502. 17:02[Music]
  503. 17:08We'll go all the way down.
  504. 17:12Kind of see where we're at.
  505. 17:15We'll come back up.
  506. 17:22All right. So, as you see from that,
  507. 17:25we have a max flow rate of something
  508. 17:28like,
  509. 17:30let's see, about actually 8 1/2 to 9 g a
  510. 17:33second. Then when I went quarter turn
  511. 17:35down, it went to about 7 1/2 g a second,
  512. 17:38maybe around eight. Then I went all the
  513. 17:39way down, it went down to about 3 g a
  514. 17:41second. It's not as accurate like say
  515. 17:43with a Bianca with the needle valve in
  516. 17:45it or a Slayer modded Brevel dual
  517. 17:47boiler. It's not as accurate as that
  518. 17:49where you can take a little movement and
  519. 17:51it's going to move like half of a gram
  520. 17:52per second. It seems to be a little bit
  521. 17:54more wavy the but the reaction to it as
  522. 17:57far as pressure goes is incredibly
  523. 18:00responsive. While it is controlling the
  524. 18:02water debit to an extent, it's more so
  525. 18:04reliant on the back pressure in here. So
  526. 18:06whenever you're doing flow control and
  527. 18:08measuring the flow unperturbed,
  528. 18:10uninhibited by a porta filter, you don't
  529. 18:12have much control. But when there is
  530. 18:14resistance in there, you will see that
  531. 18:16the control is pretty immediate with
  532. 18:17even the smallest of turns on here,
  533. 18:19which is a really neat thing to see on a
  534. 18:21machine at this price point. Now, in
  535. 18:23addition to that, which we'll see in in
  536. 18:25a second, it does have a pre-infusion
  537. 18:27option. So, I've now turned on
  538. 18:29pre-infusion for 9 seconds. You have the
  539. 18:31option from 0 to 9 or to just take it
  540. 18:33off completely. We'll measure the flow
  541. 18:34rate of that pre-infusion to see if
  542. 18:36there's anything different between that
  543. 18:37and just going low flow on here. But
  544. 18:40we'll do that now using the same app as
  545. 18:43before.
  546. 19:04Now guys, we know what that means, don't
  547. 19:06we? Did you notice it? It wasn't
  548. 19:09pre-infusing at all. That is that soft
  549. 19:12infusion that Ranchilia loves to boast
  550. 19:14about, or at least did. Uh, that isn't
  551. 19:17getting that puck wet at all. That right
  552. 19:19there is only going to wet the top
  553. 19:20layer. Oh, you don't believe me. You
  554. 19:21think that it's actual pre-infusion.
  555. 19:23That's fully soaking the puck. Did you
  556. 19:24hear the vibratory pump at all? No. What
  557. 19:26you saw was releasing of water from the
  558. 19:28boiler without pump assistance
  559. 19:30sprinkling it. That's not what we want.
  560. 19:32That's not what we want at all.
  561. 19:44All right, let's get this shot pulling
  562. 19:45with pre-infusion. I'm going to
  563. 19:46pre-infuse it and I'm going to stop the
  564. 19:48shot. Okay, you ready?
  565. 19:598.8 seconds right before the pump kicked
  566. 20:01on. Ew. The majority of that coffee is
  567. 20:04stuck on the screen. Let's see what's
  568. 20:06going on inside this.
  569. 20:08Interesting.
  570. 20:10All of that is so freaking dry. All of
  571. 20:14that is so freaking dry. That was 9
  572. 20:17seconds where the top layer of that was
  573. 20:20getting absolutely revaged by water
  574. 20:22sprinkling on it like you're caught in a
  575. 20:24downpour. But there was no pressure.
  576. 20:26There was no hand of God pushing the
  577. 20:28water column through the puck. So all of
  578. 20:30this is just sitting there going,
  579. 20:32"When's it my turn? I'm all alone.
  580. 20:35There's no one here beside me."
  581. 20:38All that caught on the screen.
  582. 20:43See, at 9 seconds, that's when the pump
  583. 20:44kicks on. That's when the delicious
  584. 20:46happens. I will never understand this
  585. 20:50idea that just sprinkling the water.
  586. 20:52Sand's pump is going to do all about
  587. 20:55your puck. Ain't gonna do puck all about
  588. 20:58it. You know what I'm saying? I don't
  589. 20:59like it. That being said, you don't need
  590. 21:01to have it on, so let's disable it. And
  591. 21:04that crap's off. Bye-bye. See you later.
  592. 21:06Even if they had proper pre-infusion, I
  593. 21:08wouldn't use it unless there was a stop
  594. 21:10built in so I could bloom. So, that's
  595. 21:12something that should be considered is
  596. 21:13having the pump stop while the solenoid
  597. 21:15valve does not release uh so that you
  598. 21:17can maintain pressure in the puck and
  599. 21:18then restart the pump. That would be
  600. 21:20nice, but we don't have that at the
  601. 21:21moment. But what we can do is lower the
  602. 21:23pressure almost to nothing essentially.
  603. 21:26uh which essentially it pretty much does
  604. 21:28the same thing. So that's what we're
  605. 21:30going to be doing for funsies on these
  606. 21:32shots that we'll be pulling here in a
  607. 21:34second. I just think that's a useless
  608. 21:36thing. Now, because it's P controlled,
  609. 21:38you can change the temperature of both
  610. 21:39the brew group and the steam boiler, uh
  611. 21:41which is the same boiler but different
  612. 21:44control temperatures. Uh you can do all
  613. 21:46that in this menu. It is a bit
  614. 21:47frustrating getting through the menu
  615. 21:49because it's these buttons and a little
  616. 21:50screen, but you know, they're not
  617. 21:52wasting resources, right? So, uh, let's
  618. 21:54go ahead and pull a proper shot and, uh,
  619. 21:58see how that goes.
  620. 22:00Now, because the machine comes with just
  621. 22:02this split PA filter, uh, I am using a
  622. 22:05different PA filter so that we can see
  623. 22:07the extraction. I'm still using the
  624. 22:09stock basket, so it's just the thing
  625. 22:10holding it that's different. Uh, just
  626. 22:12FYI. Who knows how this is going to go.
  627. 22:14I did not dial this coffee in cuz I
  628. 22:15wanted to play with it on the fly. So,
  629. 22:17let's go ahead and get this started. I'm
  630. 22:18going to reach over and hopefully not
  631. 22:19burn myself as I do this.
  632. 22:22With this valve fully open, we're going
  633. 22:24to let the pressure build and we're
  634. 22:26going to cut it all the way down. Look
  635. 22:27at that. It's like stopped.
  636. 22:30Then we can open it back up.
  637. 22:35Nice. Fully open at 10 bar. Now we can
  638. 22:37shut it back down. Look at that pressure
  639. 22:39gauge. We can close it
  640. 22:43down to like no pressure.
  641. 22:46Obviously, this is too fine of a grind,
  642. 22:47but look, we can go all the way back up.
  643. 22:49And by the way, that is measuring back
  644. 22:51pressure. Okay, it but it's in the
  645. 22:53boiler, and that's why we see there's
  646. 22:55still pressure built up. So, it's not an
  647. 22:57ideal placement for the uh pressure
  648. 23:00probe, but we can release all that
  649. 23:03pressure like that.
  650. 23:05Stop. There we go.
  651. 23:36[Music]
  652. 23:39Cheers.
  653. 23:48Not very good. But it's not because the
  654. 23:50machine, it's cuz it wasn't dialed in
  655. 23:52very well. But now what I'm going to do
  656. 23:54is I'm going to tighten the grind size
  657. 23:56up. We're going to pull a shot. We're
  658. 23:57going to steam some milk. You're going
  659. 23:58to be able to see how quickly that gets
  660. 23:59to steam. And we'll pull a little lardy
  661. 24:01art.
  662. 24:06Here we go. All right. Here we go. Going
  663. 24:10to play around with the profiling. You
  664. 24:11can watch the gauge in order to see the
  665. 24:14responsivity. So, we shut it down, let
  666. 24:17it kind of trickle, little bloom phase.
  667. 24:19Then, we open back up about nine bar.
  668. 24:22And look, there we are. Look at that.
  669. 24:24We're going to just let it cascade down
  670. 24:25like a lever shot. Look at this. Lever
  671. 24:28shot. Lever shot. Lever shot. And then
  672. 24:30we stop it. Boom. Then we turn on steam
  673. 24:33and we're going to let that go. We're
  674. 24:34going to let it heat up and we'll steam
  675. 24:36some milk.
  676. 24:54easy as pie. It went up to the
  677. 24:56temperature. You could see the pressure
  678. 24:58gauge kind of move up and it was it was
  679. 25:00relatively quick. I'd say it happened
  680. 25:01within 30 seconds where the temp the
  681. 25:04pressure was already around two bar.
  682. 25:05Now, at the end, when you want to get
  683. 25:06back to brew temperature quickly, you
  684. 25:09can just flush the steam out,
  685. 25:12just like so. You see the temperature is
  686. 25:15dipping right here. Dipping relatively
  687. 25:17quickly. You can just let it go down
  688. 25:18until it's at brew temperature if you
  689. 25:20want to go immediate, or you can just
  690. 25:21let it die on its own. Right. So, I'm
  691. 25:23just going to quickly get it back down
  692. 25:24to brew temp. Waste probably, you know,
  693. 25:2750 or 60 mls of water, but not terrible.
  694. 25:31Now, I want to reiterate that the steam
  695. 25:32one is a bit annoying with how low it
  696. 25:34is. I used this small pitcher and was
  697. 25:36able to get it under. But if you were to
  698. 25:38use a bigger pitcher, no, not going to
  699. 25:40happen. For instance, here's the stock
  700. 25:42brevel pitcher. You can get it under
  701. 25:44there and once it's there, you can
  702. 25:46steam. But once you have it this full
  703. 25:48with froth milk, if you tilt it like
  704. 25:51this to get it out, you're spilling that
  705. 25:52junk everywhere. So that just it just
  706. 25:55doesn't really make too too much sense
  707. 25:56to be honest. But that being said, it
  708. 25:58was perfectly fine doing it with the
  709. 26:00little 12 oz type of pitcher. And
  710. 26:02obviously the steaming capability is
  711. 26:04great. That milk is holding up
  712. 26:05incredibly well. Pretty easy. We'll open
  713. 26:07this bad boy up, get a good
  714. 26:09understanding of what the internals are,
  715. 26:10and we'll finish the review.
  716. 26:13Three screws, which is very, very
  717. 26:15simple. Three Phillips head screws. Now,
  718. 26:17immediately upon opening it, I love the
  719. 26:20internals, and it's largely because look
  720. 26:22what's right there. When have you ever
  721. 26:24seen a vibratory pump right there at the
  722. 26:26top? That is wild, and I love it. The
  723. 26:29G-car is easy to get to. The boiler is
  724. 26:30easy to get to. the steam wand
  725. 26:32apparatus. Everything is easy to get to
  726. 26:34right here. Good to go. I'm a fan of it.
  727. 26:36But anyway, let's go ahead and do what
  728. 26:38we normally do, which is trace the water
  729. 26:40from the tank to the boiler, see what
  730. 26:42all it passes through, and uh understand
  731. 26:44all that. Now, of course, we have the
  732. 26:45G-car right here. That's kind of in the
  733. 26:46way of everything, but uh that's okay.
  734. 26:48This is where all the brains happen. We
  735. 26:51have the water tank on my side. There
  736. 26:53are three tubes essentially. One is an
  737. 26:54intake tube. There's a little filter on
  738. 26:56it that's pulling water up into the
  739. 26:58vibratory pump and out comes it right
  740. 27:02here. Now then it splits. We have a
  741. 27:04Ysplit. This part is the over pressure
  742. 27:07valve. Right here is the over pressure
  743. 27:08valve. This whole section. So the what's
  744. 27:11too much pressure goes right here and
  745. 27:13back into the water tank, which I can
  746. 27:15make that tube move by moving this. So
  747. 27:18as you see, I'm moving that. That's one
  748. 27:20of the short tubes that goes back into
  749. 27:22the water tank. So whatever is over the
  750. 27:23pressure for the OPV, it gets shot back
  751. 27:26into the tank right there. So the water
  752. 27:28continues on through here, goes through
  753. 27:30like what it looks like PTFE. So it has
  754. 27:32silicone that intakes it. Cool water,
  755. 27:34still cool water going through PTFE into
  756. 27:37this connection right here, which seems
  757. 27:38to be some sort of cast steel or
  758. 27:40something along those lines. And then it
  759. 27:42has a T-split. Now, this is where the
  760. 27:44pressure is being read. So, actually
  761. 27:45before it goes into the boiler before it
  762. 27:47goes into the valve to uh control that
  763. 27:50pressure. And that's why even after the
  764. 27:51solenoid is released, the pressure still
  765. 27:53shows up is the solenoid is down here.
  766. 27:55It's released through the bottom of that
  767. 27:57boiler there. That's where it's
  768. 27:58connected to the solenoid right down
  769. 28:00here. And it exits through a tube to
  770. 28:01make things clean into the drip tray
  771. 28:03itself. Water comes through. It can
  772. 28:05enter the boiler here. But you also have
  773. 28:08PTFE that comes all the way over here.
  774. 28:11And this is where you have your valve
  775. 28:12inside this brass fitting. So you have a
  776. 28:15valve you open and close and when you
  777. 28:16open it some is shunted back into the
  778. 28:18water reservoir while the rest is being
  779. 28:20brought back into the actual boiler
  780. 28:22itself. And then when we look at the
  781. 28:24boiler which is insulated with that nice
  782. 28:26foam insulation. You've got insulated
  783. 28:28copper pipes right here which go to the
  784. 28:31actual steam wand. Then we look and we
  785. 28:33have our temperature sensor right here.
  786. 28:34So we have our temperature probe here
  787. 28:36and then we have our thermostats right
  788. 28:37there. Very simply laid out. Then, of
  789. 28:39course, we have wiring to go to the
  790. 28:41three buttons, which come back and
  791. 28:42connect to the G-car. Right here, we
  792. 28:45have our three-way solenoid valve with
  793. 28:47their cords that come and are connected
  794. 28:48to the pump and to the actual G-car
  795. 28:50there. And then, of course, we have
  796. 28:52another thermos switch on the side,
  797. 28:53which comes and connects the I mean,
  798. 28:55yeah. Okay. We're not going to get too
  799. 28:56intense about all this, but we have a
  800. 28:58nice brass fitting down here on the
  801. 28:59solenoid itself. We have stainless steel
  802. 29:01fitting on the other side that's
  803. 29:02releasing to the actual drip tray. And
  804. 29:04uh I mean yeah it's it's really
  805. 29:06well-built machine with a really unique
  806. 29:08kind of situation going on in here. And
  807. 29:10obviously looking at it we can
  808. 29:11understand why the flow rate is not as
  809. 29:14accurate as the pressure is. So the
  810. 29:16pressure is being read right here. So
  811. 29:18it's a much more uh uh responsive
  812. 29:21feedback whenever it's hitting the puck
  813. 29:22in here because water's coming through
  814. 29:24and then going back and being it's going
  815. 29:26in through there. So it's a it's a
  816. 29:28unique system that honestly even looking
  817. 29:30at it I still don't quite understand.
  818. 29:32It's like a constant flow of water, but
  819. 29:34this is kind of allowing some to go
  820. 29:36through and not all of it to get into
  821. 29:37the boiler itself. And so when you stop
  822. 29:39it all the way, I guess it just stops
  823. 29:41the flow completely for the most part.
  824. 29:43That's why we saw pressure dip. Uh but
  825. 29:45it is a really weird system uh to kind
  826. 29:48of understand. But anyway, that's what's
  827. 29:50going on in here. So you have cold water
  828. 29:52in into the brass, then brass out
  829. 29:53through the stainless steel shower
  830. 29:54screen. Uh and then you have the the
  831. 29:56copper tubing that goes to the uh brass
  832. 30:00fitting for the steam wand. Hot water is
  833. 30:02only going through metals. Cold water,
  834. 30:03there's PTFE and silicone. And uh that's
  835. 30:06about it. So, let's put this bad boy
  836. 30:08back together and uh finish this video
  837. 30:10up the right way.
  838. 30:12What do I think about this machine in
  839. 30:14the end? Is it worth the price? Is it an
  840. 30:17actual contender? Is this something that
  841. 30:18could disrupt the market? Well, I don't
  842. 30:20think the maybe the latter is
  843. 30:22necessarily true. I don't think it's
  844. 30:23going to disrupt the market. That being
  845. 30:24said, I do now think it is the best in
  846. 30:27this range. Now, before I gave the edge
  847. 30:29to Victoria based off of the slightly
  848. 30:32lower price than the Profitech Go and
  849. 30:33the lack of extreme capabilities the Go
  850. 30:36could offer. Um, but this at about the
  851. 30:39same price, maybe a little cheaper than
  852. 30:40the Go, this is awesome. It is built
  853. 30:44really well as we saw on the inside. It
  854. 30:46has really responsive pressure control,
  855. 30:48which is a lot of fun. You can do
  856. 30:49blooming style shots or whatever you're
  857. 30:51wanting to do. It has solid enough
  858. 30:53temperature, especially if you're a
  859. 30:54normal human and not doing, you know,
  860. 30:56backto-back shots with 5 seconds in
  861. 30:58between. Steaming capability is solid,
  862. 31:00but I can do this on any machine, so
  863. 31:02that doesn't really matter as much. And
  864. 31:03the side water fill, actually, that's
  865. 31:05like a sleeper. That is a fantastic
  866. 31:07thing. And the cup tray on top is nice.
  867. 31:09I mean, it's it's a nice machine. It
  868. 31:11does a great job at its price point.
  869. 31:13Single brass boiler inside. Not will
  870. 31:15have long long life as long as you're
  871. 31:17taking care of it. If I were to be
  872. 31:18putting this into my rating system, this
  873. 31:21would be very close to an S. It would
  874. 31:23definitely be an A, if not an S. Um,
  875. 31:26because it is, I think for the price
  876. 31:27point, this is the pinnacle currently in
  877. 31:30the market. Now, people will push back
  878. 31:32say no, the the Legato, the whatever,
  879. 31:35that's fine, but you have to remember
  880. 31:36those are not long-standing companies
  881. 31:39with a track record of high quality and
  882. 31:42repairability. This you have no issue
  883. 31:44finding replacement parts for
  884. 31:46off-the-shelf, easy. you've got uh help
  885. 31:48by reaching out to the company. You
  886. 31:50can't really reach out to the factory in
  887. 31:52China that's doing uh the machines. You
  888. 31:54can rely on the third party sellers like
  889. 31:56Turn and like Me Coffee and the others.
  890. 31:58But uh in the end, you're not you don't
  891. 32:00have kind of like a a long-standing high
  892. 32:02reputation company like QuickMill or
  893. 32:04like a profit or like a elite that can,
  894. 32:08you know, provide for years to come.
  895. 32:09There's just no real no real knowledge
  896. 32:11of that. So, for me, having about a $300
  897. 32:13or $400 increase in budget, uh, at least
  898. 32:16if you're in Europe, to go from one of
  899. 32:18those cheaper machines to this, I say is
  900. 32:20absolutely worth it if you can swing
  901. 32:21that. Uh, of course, that's not the case
  902. 32:23for everybody, but I am very, very, very
  903. 32:25much impressed with this machine. I am
  904. 32:27bummed I did not have it for the
  905. 32:29official tier list, which I did a few
  906. 32:31weeks ago, uh, but I have it now and I
  907. 32:33am thoroughly floored. Obviously, you
  908. 32:35can modify a gajuino, wrenchilio,
  909. 32:36whatever in order to have flow control,
  910. 32:38P control, but out of the box, I don't
  911. 32:40think anything beats this currently on
  912. 32:42the market when it comes to single
  913. 32:44boiler machines. That is my thought.
  914. 32:47Take it for what you will. Thank you for
  915. 32:48watching. If you want a chance at
  916. 32:49winning this machine, as well as the
  917. 32:51Profit Gone, the Lily Victoria, and a
  918. 32:52slew of others, check out my Patreon
  919. 32:54below. Uh, hit the like and subscribe if
  920. 32:56you enjoyed the content. Thank you so
  921. 32:57much for watching. I hope that you have
  922. 32:59a wonderful day, and uh, more
  923. 33:01importantly, I hope that you brew
  924. 33:02something tasty today. And cheers.

About this transcript

This page contains the full transcript of Finally, Manufacturers are Listening!: Quick Mill Pop Up Review by Lance Hedrick, generated from the public captions YouTube serves with the video. The transcript has 6,592 words across 924 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.