Double DIN Radio in a Foxbody Mustang! A/C Controls Relocated — Transcript
Full transcript
- 0:01Morning.
- 0:03Welcome back.
- 0:0431 degrees. Haven't had my Red Bull yet.
- 0:07I dropped it already.
- 0:09And uh
- 0:12we're going to try and fix the radio in
- 0:13this thing.
- 0:23I couldn't have had like a indoor hobby,
- 0:25like basket weaving or video games or
- 0:28just sitting on the couch and doing
- 0:30nothing.
- 0:37[music]
- 0:42Ooh, she chooching this morning.
- 0:45It's chilly.
- 0:46Chilly.
- 0:48It sure is nice, though.
- 0:50Looks a little blue, but I promise you
- 0:52it's steam.
- 0:54Any who,
- 0:56here's the issue we got going on.
- 0:58We put a radio in this thing a while
- 1:00ago.
- 1:04That's good.
- 1:07That's real good.
- 1:11Anyways,
- 1:13so we put a radio in this thing a while
- 1:15ago and
- 1:17uh Atoto sent this out and
- 1:20I mean, it's great for a single DIN,
- 1:24whatever. It's just everything [music]
- 1:26is so small. The buttons are small and
- 1:29the fact you couldn't hear anything at
- 1:31all. I had this thing cranked up and the
- 1:34only thing you could get through it
- 1:36this trying to say hi.
- 1:39Think you just once fed. Any who,
- 1:41the only thing you could hear through it
- 1:43was voice. It was just
- 1:45terribly distorted.
- 1:47It wasn't great. Actually, it was very
- 1:49bad. And so I went and I got an
- 1:52amplifier. I think this factory radio
- 1:55was 25 watts per channel and the front
- 1:58were split, so
- 2:0012 and to the six and a halfs, and then
- 2:0212 and a half to the four and a half up
- 2:05on the dash, which was terrible. It was
- 2:06absolutely terrible.
- 2:09So I went and got an amp. It was a 400 W
- 2:12amp, so 100 by four, which still splits
- 2:15the front two, and I put a high pass
- 2:17filter
- 2:18uh in line filter on the dash speakers,
- 2:22and it just it still sounds absolutely
- 2:25terrible, and it's the buttons are hard
- 2:27to push, and it's just not very usable.
- 2:30So Atoto
- 2:32wants to make up for it, and they sent
- 2:34me a double DIN 7-in touchscreen, and we
- 2:38got the relocation to put the AC
- 2:42controls
- 2:44or the climate controls down here and
- 2:46the radio up here. So the double DIN
- 2:47will be up here, and the climate control
- 2:50will be down here, which is 1,000%
- 2:53better positioning than the factory. Uh
- 2:57the radio being right in front of the
- 2:58shifter, it's it's terrible. You got to
- 3:01look like way down to see anything, and
- 3:04if you have one of these Fox bodies, you
- 3:06know what I'm saying.
- 3:07>> Yep.
- 3:09>> So anyways, let's check out what they
- 3:12sent us and look at the relocation.
- 3:16[sighs]
- 3:22[sighs]
- 3:23So good.
- 3:24So so good.
- 3:27It's kind of weird with this mic here. I
- 3:28feel like I'm a astronaut
- 3:31about to come in on the space shuttle.
- 3:34Uh cool fact, I was a door gunner on the
- 3:37space shuttle for a while.
- 3:43Pretty interesting job. So here is all
- 3:45of our stuff. This is the relocation.
- 3:49Like I said, takes the climate control
- 3:51stuff and pulls it down below the radio,
- 3:54puts the radio above. Open this up and
- 3:56uh there's something you guys notice
- 3:59about this.
- 4:02There's no
- 4:04holes or
- 4:06anything
- 4:07on it.
- 4:09That's because it Velcro's up there.
- 4:11Yeah, I didn't know that.
- 4:13We're not going to use Velcro cuz that
- 4:14is not going to last two minutes
- 4:18in the weather.
- 4:19So I'm going to probably put screws
- 4:22in each corner.
- 4:23We'll figure that out at another time.
- 4:25Any who,
- 4:26here's the double DIN radio.
- 4:29Glare's kind of bad out here, but
- 4:31uh this is a much much needed
- 4:35improvement over the one that's in
- 4:36there. Has physical buttons that are
- 4:38easy to read, easy to use.
- 4:41Look how small these things are getting
- 4:42these days. I guess when you don't have
- 4:44to have a uh disc in there,
- 4:48you can get these things super super
- 4:50tiny.
- 4:51Anyways, it's got optical. I didn't know
- 4:54use anything could use optical in a car
- 4:56and maybe that's for
- 4:58something specific I'm going to have to
- 4:59read on. We'll go over the features and
- 5:01everything else as we're installing it,
- 5:03but
- 5:04comes with a GPS antenna for navigation,
- 5:07microphone, your cords. There's a little
- 5:10port for the SIM card. Here's the SIM
- 5:13card. You can activate that and you can
- 5:15have 4G inside the car all the time. You
- 5:19don't have to have your phone connected
- 5:20to use the maps and everything else and
- 5:22the internet so blah blah blah blah.
- 5:24Here's the 4G antenna which if you have
- 5:27like a
- 5:31or any of those wireless hotspots in
- 5:33your house, you can connect this guy to
- 5:35it and stick it on the window or stick
- 5:37it anywhere outside and it'll work. Just
- 5:40saying.
- 5:41And
- 5:43USB plugs,
- 5:45the frame,
- 5:46uh all your other cords, the
- 5:49um amp outlets and
- 5:52and business like that,
- 5:54screen protectors as well.
- 5:57All of that came in this kit.
- 5:59And I do believe it is very reasonably
- 6:02priced on Amazon. This particular model
- 6:06that we're going to install today, that
- 6:07you're seeing is the Sierra 8 Lima Golf
- 6:112 Alpha 7 Sierra Delta Tax Sierra 01.
- 6:18So first things first in here, we got to
- 6:20get all this business
- 6:23out
- 6:24and get ready to put in the relocation.
- 6:27Obviously, we can't put the base on till
- 6:28the radio's in.
- 6:30Blah blah blah. Any who, you're going to
- 6:32watch and I'm going to do things and I'm
- 6:34going to fail and you're going to laugh.
- 6:36It'll be a good time.
- 6:38Feels like it's getting colder for some
- 6:39reason, so
- 6:41I'm going to hurry up.
- 6:43I've pulled out everything already.
- 6:44These are the power wires
- 6:47connected for the radio as well as the
- 6:51remote back to the amp.
- 6:53These are all my amp wires. I'm going to
- 6:55disconnect all this garbage cuz it's
- 6:57garbage.
- 6:59I have everything run directly from the
- 7:01amp back of two the speakers. There's no
- 7:05anything in between. No factory harness
- 7:08in between anywhere. So
- 7:11that's all replaced
- 7:13and so it's just the amp, just the
- 7:15radio.
- 7:17That's it.
- 7:19We're going to leave the power wires for
- 7:20this one cuz it's going to be the same
- 7:23as the other one.
- 7:25>> That's not.
- 7:27>> But
- 7:28we're going to replace all this
- 7:29business. I'm not worried about which
- 7:31channel goes to which. We'll figure it
- 7:32out back at the amp. I need to relocate
- 7:35it anyways and I'll show you why
- 7:37in a little bit. But let me get this all
- 7:39hooked up
- 7:42and thrown in here and then we'll start
- 7:44relocating.
- 7:46Little update for you.
- 7:48Camera's wired. Didn't show you. It was
- 7:50boring
- 7:51and I didn't feel like filming it. So
- 7:53here it is.
- 7:55Starts right there.
- 7:56Goes around
- 7:58and in
- 8:02and it's hanging right here. Now I got
- 8:03to wire it down and around and into the
- 8:05dash
- 8:08where it will terminate.
- 8:10Then turn on and off.
- 8:11When I do the reverse lights, it's just
- 8:14tapped into the actual reverse power
- 8:16bulb there, and it's triggered at the
- 8:18head unit. So,
- 8:20that's it.
- 8:21Moving on.
- 8:23And we're caught back up as far as I'm
- 8:25going to go with routing and stuff like
- 8:27that, so you guys don't have to sit here
- 8:30and
- 8:31watch me do all that stuff again.
- 8:33So, this whole thing, interesting.
- 8:37After going through all the instructions
- 8:39and everything else like that.
- 8:41I mean,
- 8:42so I didn't design it. I didn't come up
- 8:45with the idea, and
- 8:47I can't really bash on it.
- 8:50Apparently, there was a previous version
- 8:52that did not have this flush mount. It
- 8:55was screws over the top and such.
- 8:59Um, and people didn't like it. They
- 9:01wanted something where you couldn't see
- 9:02the screws and everything else. So, I
- 9:04get it. I'm just not a huge fan of the
- 9:06idea of using Velcro.
- 9:08And if anybody has lived in Phoenix or
- 9:11gone to Phoenix at any point in time,
- 9:12anything sticky, glue, adhesive, it
- 9:16doesn't work. It
- 9:17It'll melt and peel right off. There's
- 9:19no force on this, so maybe it'll be
- 9:21fine. So, we'll try the Velcro first
- 9:22before drilling holes and putting screws
- 9:24through it anyways. So, this is what we
- 9:26have to do. For you guys, it's probably
- 9:28going to be different. I have a vintage
- 9:30air kit, so it's literally just this
- 9:32piece, and it's going to screw right
- 9:33here. We'll line it up with that bezel.
- 9:36It'll screw in, and that's where it'll
- 9:38go.
- 9:38Everybody else that has the factory
- 9:41stuff is going to have to re-route the
- 9:43vacuum lines and uh controls and stuff
- 9:46like that. So, that's that's not an
- 9:48issue you're going to see on this one,
- 9:50unfortunately, for you guys if you do
- 9:51have that. So, next what we have to do
- 9:53is we have to cut this out because the
- 9:56radio itself is going to sit down in
- 9:58there. And if you have a CD player,
- 10:01if the CD portion extension goes over
- 10:04the top of this or it's a single DIN
- 10:06with a dual double DIN face,
- 10:09then it can go right over the top of
- 10:11this face. Otherwise, you have to cut
- 10:12this metal brace, dash brace, out of
- 10:15here. But these will definitely have to
- 10:17go. So, we'll cut that plastic there and
- 10:18there.
- 10:19And then we are going to put
- 10:22the brackets that came with the mount
- 10:24on the side of this radio, and then the
- 10:26radio will bolt into those factory holes
- 10:29there and then the screw holes down in
- 10:31the bottom. And we'll get it all lined
- 10:33up with this here. However, I am going
- 10:36to have to do a little trimming on the
- 10:37edges of this one
- 10:39because it doesn't quite sit down in
- 10:41there perfectly. It's just a little bit
- 10:43of trimming around the edges here and
- 10:45there, straightening out the corners,
- 10:47stuff like that, and it should
- 10:48go right in there. So, I'm going to go
- 10:50ahead and trim that real quick
- 10:52and then we'll get to putting the
- 10:53brackets on
- 10:54and lining up the HVAC controls.
- 10:58All right, there we go. Just a little
- 11:00straightening out of the corners with a
- 11:02straight razor
- 11:04uh or any type of hand razor or knife or
- 11:06anything else like that.
- 11:08You can get it fit nicely down in there
- 11:12and it's good to go. Now, we just need
- 11:14to start messing with that over there.
- 11:17I've got sunshine.
- 11:20Wonder if this will fit without
- 11:22modifying that bracket back there. Got
- 11:24all 40 billion wires sticking through
- 11:26here.
- 11:34Okay.
- 11:35Sweet.
- 11:40Oh, I'm going to have to cut that.
- 11:42For sure.
- 11:44Now, this guy.
- 11:46Let's get this lined up.
- 11:49On the instructions it says you got to
- 11:50trim this. Mine's just metal, so it just
- 11:53needs to be bent back just a little bit
- 11:57and then it'll slip down and sit flat
- 11:59in here.
- 12:01Anyways,
- 12:02let's see how this lines up
- 12:05and where it needs to sit.
- 12:09From what I understand, it's going to
- 12:10sit just like that
- 12:13in there.
- 12:14it should look pretty good, I guess. I
- 12:16don't know.
- 12:18I think that
- 12:20shifter
- 12:21is holding it up a little bit, but
- 12:23right there
- 12:25a little
- 12:26hold that in place,
- 12:28put one screw in
- 12:30and then
- 12:33do the rest.
- 12:36This is interesting, holding this here
- 12:39and finding the stuff I need.
- 12:42Hey.
- 12:46And the bit's missing. Of course it is.
- 12:48There it is.
- 12:52Now the other
- 12:54So I've got two screws or two screw
- 12:56holes already down in here and I'm just
- 12:59kind of
- 13:00reusing them.
- 13:03And so
- 13:06already there.
- 13:08That is way off.
- 13:21Okay.
- 13:22Now we get to see how that looks
- 13:26with the face and if it's lined up or
- 13:28not.
- 13:32It is
- 13:34low
- 13:35for sure. Okay. So we got to go up,
- 13:39go into the other holes.
- 13:41It does say
- 13:43to use a paper piece of tape
- 13:45to keep from scratching
- 13:49everything
- 13:52with the grill.
- 13:54In case you're wondering, it does warn
- 13:56you against that.
- 13:58That is better. I think that'll do
- 14:01right there.
- 14:03Installed.
- 14:05Now we still got a lot of work to do.
- 14:07So the way that this is going to work
- 14:09is this kit came with these brackets and
- 14:11these brackets are going to go see these
- 14:14two factory holes.
- 14:16They're going to go right in there.
- 14:18Obviously, we still have to cut this
- 14:19portion out.
- 14:21They're going to go right in there, and
- 14:22they have spacers that he sent with the
- 14:24kit
- 14:28that will go up against it, and the
- 14:30screw will go all the way down through
- 14:32and into those factory screw holes
- 14:34there.
- 14:35And then these holes
- 14:38will go here into this flat portion that
- 14:41the actual
- 14:42um
- 14:45climate control
- 14:47is screwed into. So, I'm going to screw
- 14:49around with that for a little bit, mount
- 14:51these up
- 14:52to this guy, which doesn't look like
- 14:54there's any mounting holes.
- 14:57That's neat. And then we'll figure it
- 14:59out from there.
- 15:03[music]
- 15:07[music]
- 15:20[music]
- 15:26[music]
- 15:30[music]
- 15:39[music]
- 15:51[music]
- 16:00Sun is bright and [music]
- 16:03working on winter.
- 16:04Bright up in this joint.
- 16:07[music]
- 16:10Again, don't judge the headliner.
- 16:12[music] Haters going to hate. All right,
- 16:14so this is all wired up. It is a
- 16:16disaster with wiring.
- 16:19But it all has to hook up to that.
- 16:21There's like 25 different plugs with
- 16:24accessories and everything else on
- 16:25there. So all we got to do is bring this
- 16:27up now
- 16:29and hook up our power. I've hooked up
- 16:30the camera power [music]
- 16:32and all that business, the microphone
- 16:34and everything else. So
- 16:36now we just have to get it up in there,
- 16:38screwed in,
- 16:40and then
- 16:41that cover should go on. So let's go
- 16:43ahead and get started with all that.
- 16:50[music]
- 16:57[music]
- 17:05[music]
- 17:13Everything appears to be wired up.
- 17:16It's kind of a mess.
- 17:18It is what it is.
- 17:19I do have some heat shrink gun there.
- 17:21I'm going to roll over and cover all the
- 17:24ends and everything else like that.
- 17:25However, I need to make sure this
- 17:27actually turns on, does what it's
- 17:28supposed to before I shove this thing
- 17:30[music] back in there and don't have any
- 17:32access to it. So
- 17:38I don't know what I did with the keys.
- 17:42Sweet.
- 17:45Perfect.
- 17:47Be on.
- 17:57And nothing.
- 18:03Uh
- 18:10Let me check the fuse under the dash for
- 18:11the radio itself.
- 18:15Where
- 18:17There's no fuse in there.
- 18:19How can that
- 18:20How can there be the radio if there's no
- 18:22fuse in there?
- 18:24You know me that.
- 18:26Batman.
- 18:28Well.
- 18:30I don't know. I don't
- 18:32There's supposed to be Right there is a
- 18:33fuse. That's where the radio is supposed
- 18:35to be.
- 18:36Come on.
- 18:37Come on now.
- 18:39Big one, little,
- 18:42little, big.
- 18:44This is it.
- 18:50Right here.
- 18:52It is not popped.
- 18:54I don't understand.
- 19:00Found it.
- 19:03Here we go. I don't know what that was.
- 19:06Foot fell.
- 19:08Okay.
- 19:10So first startups are always long. I
- 19:12noticed this with my other one.
- 19:15Okay.
- 19:19All right.
- 19:20I hear you.
- 19:22Well, that works. I had sound. Let's
- 19:25see.
- 19:27Let's go here for here.
- 19:32Somewhere. Where is the audio?
- 19:37Here we go.
- 19:393D surround, vocal exciter, virtual
- 19:42bass, my classic bass oh MV classic
- 19:45bass.
- 19:46I just want to make sure all the
- 19:47channels are working.
- 19:49How do we do that? Guess they have to
- 19:50play some music. All right, let me
- 19:52connect to this mug.
- 19:54All right.
- 19:58That's with bass and everything in here.
- 20:00That sounds really good.
- 20:05This is totally different sound system.
- 20:06The amplifier in the other one had to
- 20:08have been fried or something.
- 20:10[music] It sounds
- 20:12amazing.
- 20:14So I wired the top speakers in
- 20:16on their own to [music] the back of the
- 20:18radio so I could tune the frequency and
- 20:20stuff like that. And then all the others
- 20:22run the 400 watt amp.
- 20:25It sounds great.
- 20:27I am so so surprised [music]
- 20:29by this.
- 20:30And it does wireless CarPlay,
- 20:33wireless
- 20:34Android Auto, all that business.
- 20:37All right, now that I know everything's
- 20:38working,
- 20:41let's go ahead and put this all back
- 20:42together and see if we can't finish it
- 20:44up.
- 21:29All right, update number 3,225.
- 21:34So I've got this thing. I spent about an
- 21:36hour trying to get this thing lined up
- 21:38in here, getting these spacers and these
- 21:40screws in here. All this plastic is kind
- 21:43of deformed cuz it's well 30 years old.
- 21:46And
- 21:48it's just you know, I I think we're
- 21:51closer to 36 years old now.
- 21:5736 years old, so
- 21:59it just doesn't want to fit in there
- 22:00very well. It needs to go up. It needs
- 22:03to tilt up like this and go into place.
- 22:06It's just not letting me do that.
- 22:10So that's kind of the pain right now and
- 22:14there's nowhere to put Velcro.
- 22:16Instructions say to stick the Velcro
- 22:20on the back of this thing here, here,
- 22:23and I think here as well. There's just
- 22:25no
- 22:27what's it going to Velcro to? That it
- 22:28doesn't
- 22:30I don't
- 22:32that doesn't make any sense to me.
- 22:35I could see doing Velcro like here or
- 22:37here,
- 22:39but
- 22:40beyond that, it just doesn't uh
- 22:46no Nintendo. It doesn't compute.
- 22:49So anyways, I'm going to keep uh
- 22:54just going to say one thing, but I'm
- 22:55going to say I'm just going to keep
- 22:56messing with this and see if I can get
- 22:59it
- 23:01closer.
- 23:03Yeah, that's what we're going with,
- 23:05closer.
- 23:07Take out the spacer on the top here, see
- 23:09if we can
- 23:11get this thing just to tilt back and in
- 23:14some.
- 23:15These spacers are just
- 23:17pretty impossible to get in and out of
- 23:20here.
- 23:21So
- 23:23we'll just let it fall and it can
- 23:25chill in there. If it rattles over, take
- 23:26this whole thing apart again and burn
- 23:28the car, but uh
- 23:30>> Boy,
- 23:31that escalated quickly.
- 23:33>> It's just I I think there could have
- 23:35been a little more thought into this.
- 23:38And don't get me wrong, I don't I don't
- 23:39exactly know
- 23:41how I would do it better. There's not
- 23:44really a good way to do this. I think it
- 23:46would have had more to do with
- 23:50something on the back of this fascia, so
- 23:52it's not just
- 23:54you know
- 23:55stuck on there.
- 23:58I think that's where I would change it
- 24:00some if it tore me.
- 24:03See how that looks.
- 24:05I think that's a little too much tilt,
- 24:07but let's see what we got here.
- 24:13Yeah, we'll take some of the tilt out of
- 24:15it.
- 24:17Put it back on.
- 24:22Yeah,
- 24:23that's a lot better.
- 24:25But what I think I'm going to do
- 24:29beyond [snorts] that
- 24:31because I'm going to put two screws
- 24:33right through here.
- 24:35Yep. You're
- 24:37Right through there.
- 24:39We'll raise this up a little bit so it's
- 24:41level.
- 24:44And we'll call that good. [sighs]
- 24:49All right. [sighs]
- 24:51That is much better.
- 24:53I countersunk these. They look good.
- 24:56I think it looks fine like that.
- 24:59It's a little the like I said, the
- 25:01plastic in here
- 25:02wasted.
- 25:04So I do with it what I can.
- 25:06And this looks great.
- 25:08Radio sounds amazing. The only thing
- 25:11left to do now is to get all this zip
- 25:14tied up and put away
- 25:16and take it for a drive, see how it
- 25:18sounds on the highway cuz I need to go
- 25:20get a fuel filter for Earl. He is having
- 25:24intermittent runs of being lean.
- 25:28So
- 25:29I'm going to try a fuel filter first,
- 25:31but let's get this all put back together
- 25:33and then go for a drive.
- 25:39That looks way better.
- 25:41[music] I'm much happier with this.
- 25:43Much better placement with the climate
- 25:45control down there. It sounds [music]
- 25:48way way way way better. I don't know
- 25:51what was up with the amp in the other
- 25:52one, but it was [music] terrible. This
- 25:54one
- 25:57Uh sounds just so so much better. It's
- 26:01crazy
- 26:02the difference. [music] Uh
- 26:05it could have When we were installing
- 26:06that first one, remember they had those
- 26:08wires tied together in the trunk.
- 26:10They could have been clipping and
- 26:12causing the amp to short and then the
- 26:13whole thing just [music] was crap after
- 26:15that. But
- 26:17so back to what I was saying, the the
- 26:20sound is just so much fuller and I I
- 26:22have a hard time believing that that
- 26:23other radio
- 26:25didn't already have all that. So it's
- 26:27kind of hard to tell
- 26:29uh whether or not there was an issue or
- 26:31it was just a terrible radio to begin
- 26:32with, but Atoto really
- 26:35redeemed themselves with this one. It
- 26:37sounds so good. I'm so happy with it so
- 26:40far. [music]
- 26:42Got the rear camera
- 26:44and
- 26:46it also has YouTube, CarPlay,
- 26:49if you get the 4G SIM card put in, which
- 26:52I didn't do because I usually use the
- 26:54Starlink when we're traveling, so
- 26:57that works just as well. But it does
- 26:59have the option for SIM card. You just
- 27:01activate it and you can use YouTube.
- 27:04There's Netflix on here too. Torque if
- 27:06you have the OBD2 port, [music]
- 27:09HDMI input, Spotify,
- 27:12all the business tire pressure sensor
- 27:14monitoring you can link with it.
- 27:17There's also an AI on here that you can
- 27:22converse [music] with and all that
- 27:23stuff. Screen mirror. It's it's an
- 27:26interesting
- 27:28setup.
- 27:29Lots of cool features. It's going to
- 27:32take me a long time to go through all
- 27:34this stuff and to figure it out, but
- 27:37thank you again Atoto for
- 27:41redeeming yourself with this system and
- 27:44getting me back into a point where I'm
- 27:46not so frustrated with the stereo that I
- 27:48want to burn the whole car down.
- 27:51Thanks again for that one
- 27:52and
- 27:54maybe we'll do some more driving
- 27:56and some more radio listening.
- 27:58Hey, real quick guys, Evil Energy is
- 28:00sending a bunch of performance parts for
- 28:01Earl. That's all coming up in the next
- 28:03episode.
- 28:05Go to their website, give them a check
- 28:07out, make sure you thank them for
- 28:09keeping the content going.
- 28:12Please please tune in. It's going to be
- 28:13a great episode
- 28:15and we'll see you then. Until then,
- 28:18make sure you have fun.
- 28:45>> [music]
About this transcript
This page contains the full transcript of Double DIN Radio in a Foxbody Mustang! A/C Controls Relocated by Veteran Revivals, generated from the public captions YouTube serves with the video. The transcript has 3,659 words across 674 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.