Don’t Do These 3 Things When Brewing Pour-Over — Transcript
Full transcript
- 0:00This video is brought to you by
- 0:01Squarespace.
- 0:04What's up everyone? Lance Hedrick here.
- 0:06And in today's video, we're going to
- 0:07talk about how to improve your
- 0:09pour-over.
- 0:12Now, I've done videos like this in the
- 0:13past on how to dial in, what kind of
- 0:15variables you can play with, but today
- 0:17we're going to make it even easier.
- 0:18We're not going to kind of put you in
- 0:20this you need to do this, this, and
- 0:21this. Instead, what we're going to talk
- 0:23about is the negation. We're going to
- 0:25say what not to do. And I've got three
- 0:26things I'm going to urge you to try and
- 0:29not do and see how it improves your
- 0:31pour-over. Now, of course, if you enjoy
- 0:32your pour-overs, they're like the best
- 0:33thing ever, then what are you doing on
- 0:35this video? So, if I say don't do
- 0:37something and you're doing it and you
- 0:38love it, great. That's fantastic. This
- 0:40is for people who are wanting to
- 0:42figure out what might be going on with
- 0:44their pour-over setup. And these are
- 0:45things I have found work for me.
- 0:47Whenever I include them, I don't enjoy
- 0:49my pour-overs as much. So, we have three
- 0:52big ones today that we're going to go
- 0:53over. And the first one, jumping right
- 0:54in, is do not use boiling water.
- 1:00There are lots of guides and things
- 1:01online saying, "Go to boiling. Go to
- 1:02boiling. You need as much temperature as
- 1:04possible, especially for light roast."
- 1:05And I get that. And honestly, I've
- 1:07preached things very similar to that
- 1:09years ago. But I'm here to say that
- 1:12while that is true, it does improve
- 1:14extraction, it also is pulling out
- 1:17compounds that we don't necessarily
- 1:18want. Things that are a bit more bitter
- 1:20tasting, things that are a bit more
- 1:21gross.
- 1:24When you use hotter water, even with
- 1:26ultra-light coffees, you get more of
- 1:27that roasty flavor that you may not be
- 1:29enjoying. So, if you're someone that's
- 1:31moved to lighter roasted coffees and
- 1:32you're not enjoying your pour-over, say
- 1:33tastes really bitter, you might be using
- 1:35boiling water. Don't do that.
- 1:39I normally go 93, 92, 93 for really,
- 1:41really lightly roasted coffees, 90, 91
- 1:44for normal light roasts, and I go below
- 1:4690 for anything medium or darker. And I
- 1:49find that that gives me the least bitter
- 1:51experience as far as how much I can
- 1:53control the bitterness with temperature
- 1:55without sorely under-extracting the
- 1:57coffee. Obviously, you get down below 80
- 1:59degrees, your water doesn't have enough
- 2:00energy to properly go through and
- 2:02extract a lot of the things that need
- 2:04specific temperatures to give you that
- 2:06full filter experience. But when we're
- 2:07living in this range of around 85 to
- 2:10100,
- 2:12this is some good stuff.
- 2:15I'm going to brew up two pour-overs
- 2:16right now with an ultra-light coffee. A
- 2:18washed Kenya coffee that's literally
- 2:19roasted the the on the bag it says
- 2:21ultra-light. All right, so very light
- 2:22roast. I'm going to do one at 100° C and
- 2:25one at 93°. 93 is my personal peak.
- 2:28That's as hot as I go. I don't care how
- 2:30light the coffee is. I don't care if I
- 2:32lose a percentage of extraction. I'm
- 2:34going to go to 93 because above that, it
- 2:37always gets more bitter. Now, it's not
- 2:39oh, at 93.1 it gets bitter. No, it you
- 2:41probably be fine at 94, but I found
- 2:43consistently 93 to be kind of my
- 2:45ceiling.
- 2:50We'll measure the extraction so you can
- 2:51see kind of what the disparity is
- 2:52extraction-wise, but what I'll tell you
- 2:54is it's nowhere near as big of a
- 2:57disparity as if you were to change your
- 2:58ratio or your grind size or the amount
- 3:00of pours you do. Those will dictate your
- 3:02extraction a lot more strongly than a
- 3:05slight bump in temperature or a slight
- 3:07decrease in temperature.
- 3:09All right, so we've got our TDS. So,
- 3:11we've got our beverage yield, we've got
- 3:13our TDS. What we need to do is we have
- 3:14to throw plug plug this into equation
- 3:16for extraction yield, right? So, in
- 3:17order to do that, what we're going to do
- 3:18is we're going to take that we're going
- 3:19to take the one and carry it over. We're
- 3:20going to do please excuse my dear Aunt
- 3:22Sally, PEMDAS order of operations, we
- 3:23all know that. We got to take this and
- 3:25we got to take the the the root of it.
- 3:26What is it called? The the what root?
- 3:28The the the the the square square
- 3:31Squarespace. Squarespace is a sponsor of
- 3:33today's video.
- 3:35Now, Squarespace, if you're wondering,
- 3:37if you've been living under a rock, is
- 3:38an online tool to help you get your
- 3:40ideas out to the world. What do I mean
- 3:41by that? It is a website that offers you
- 3:43a all-in-one stop way to create your own
- 3:46website. You can also create a community
- 3:48there. You can have a little back and
- 3:49forth with the people that enjoy your
- 3:50ideas, your entrepreneurial skills.
- 3:52Whether you're creating ceramics or
- 3:54porcelain, whether you're creating beat
- 3:56bags of coffee, whether you're creating,
- 3:58I don't know, scales. You can do all of
- 4:00that through Squarespace. In addition to
- 4:02that, you can sell stuff on there. You
- 4:03can have your own shop right there, bada
- 4:05bing bada boom, on the Squarespace. Now,
- 4:07I've got the coolest thing ever. Go down
- 4:08in the caption down below, and guess
- 4:10what? There's going to be a link there
- 4:11that says
- 4:11www.squarespace.com/lancehedrick.
- 4:13And when you click on that, you're going
- 4:15to get 10% off your first purchase of a
- 4:16website or domain. So, you can go on
- 4:18there and you can get
- 4:19ibrewtastycoffee.com.
- 4:21It's probably available. I don't know, I
- 4:23didn't check. But you could get that
- 4:24with 10% off using that code. And guess
- 4:26what? Every time you hit that link,
- 4:27helps the channel. Anyway, thank you so
- 4:29much Squarespace for
- 4:30sponsoring this video and a lot of these
- 4:32crazy videos that I do. And let's get
- 4:34back to the square root and calculating
- 4:35this extraction yield.
- 4:39With the 93°
- 4:41brew, we extracted about, as I
- 4:44predicted, about 1% less extraction
- 4:47yield than the 100°. So, now of course,
- 4:50we can, you know, go okay, if we did 3°,
- 4:53maybe it'd be about a half percentage.
- 4:55Obviously, yes, when you increase your
- 4:56temperature, there will be an extraction
- 4:58difference, but some of that is going to
- 5:00be dependent on what is being extracted.
- 5:04In coffee, we only have a certain amount
- 5:06of percentage of the actual material
- 5:08that can be extracted. Normally, for in
- 5:11realistic sake, for people with home
- 5:13setups, the maximum's like 23, 24%.
- 5:16There are people who claim all the time
- 5:1828, 29%, but regardless, there are
- 5:21always those outliers of people claiming
- 5:22to enjoy 22 plus,
- 5:24which I'm not negating, but uh the
- 5:26majority of people prefer 18 to 21 or so
- 5:28percent. And a lot of that's just
- 5:29because of the organic compounds that
- 5:31come out around that time are tend to be
- 5:34a bit more sweet, tend to be a bit more
- 5:37um
- 5:38palatable than when you go past that,
- 5:40where the concentration flips to more
- 5:42bitter compounds, more drying kind of
- 5:44astringency. So,
- 5:46let's take a little blind taste here.
- 5:48So, what I'm going to do is I will have
- 5:50Hugo switch these around, and we're
- 5:51going to need to remember which is which
- 5:53because these aren't marked. So, you're
- 5:55going to have to watch and figure out
- 5:56which is which. And Hugo's going to have
- 5:57to remember.
- 6:00Good luck.
- 6:01Obviously, there is going to be a
- 6:03percentage of extraction difference, but
- 6:05my theory is that
- 6:07a lot of that, what is being extracted,
- 6:08are going to be a bit more of the
- 6:09bitterness, not a full percentage worth,
- 6:11but anyway, let's see. All right. Well,
- 6:13immediately,
- 6:15this one tastes a lot smoother. That one
- 6:16a bit more bitter.
- 6:18That's right. Okay. That was pretty
- 6:20easy, pretty quick. Now, some could say,
- 6:21"Well, it's cuz it's less extracted."
- 6:23Well,
- 6:24I'm getting similar fruit notes
- 6:25throughout both, but this one has a very
- 6:28noticeably less bitter and drying
- 6:30sensation. And just to back it up, Hugo,
- 6:33come on over here. All right, taste
- 6:34them.
- 6:36>> [snorts]
- 6:41>> Cooler hotter? Yes. [laughter]
- 6:43Now, you may be saying, "Well, aren't
- 6:44the temperatures different right now?"
- 6:46We got 46.2,
- 6:4945.7.
- 6:52Anybody tell the difference between half
- 6:53a degree? Of course, there's going to be
- 6:54skepticism, people saying it's cuz it's
- 6:56a an extraction point different, and
- 6:58that's fair. I don't feel like doing 50
- 7:00tests to kind of show up, but it's over
- 7:02my many years of brewing coffee,
- 7:04competing in Brewers Cup, helping other
- 7:06Brewers competitors, I have found that
- 7:08hotter temperature tends to bring out
- 7:09more of the roasty notes. It is going to
- 7:12show a higher extraction, but where do
- 7:13you think the roasty notes are coming
- 7:14from? You have to extract something
- 7:15different to get roasty notes. Bada bing
- 7:17bada boom. I'm not saying that it
- 7:18accounts for a little percentage, but
- 7:19anyway, long story short, try it out.
- 7:22You don't have a variable temp kettle?
- 7:23No worries. Just set it out, let it sit.
- 7:25Some of you have little handheld
- 7:27thermometers for like meat checking,
- 7:29maybe clean it off really nicely, but
- 7:31toss that bad boy in there and just make
- 7:32sure you're, you know, below 95 or so.
- 7:35Try that out. If you don't like it, you
- 7:37can go back to boiling. But for those of
- 7:39you at elevation, you don't need to
- 7:40worry about maxing out temperature. Go
- 7:42at as hot as you can. If it's 90, that's
- 7:44great. Temperature is one of the ways of
- 7:47extracting, yes, but not all extraction
- 7:49is the same. Think about cold brew. Cold
- 7:51brew is not pulling out a lot of the
- 7:53nuanced acidity that we see and perceive
- 7:55in hot brewed coffee, but it's still
- 7:57getting a similar extraction yield. So,
- 8:00it's still extracting 20%, but it's not
- 8:02the same 20% at all as what we're
- 8:04getting in a hot brew, right? And it's
- 8:06in a lot less time. So, it's doing it
- 8:08without temperature, but with time. And
- 8:10so, we're getting different things can't
- 8:11extract in 3 minutes with a pour-over
- 8:14that we can get in 20 hours with a cold
- 8:16brew. You see what I'm getting at?
- 8:17Different variables affect extraction
- 8:19differently. I tend to prefer extraction
- 8:22that's garnered from either a slight
- 8:23grind change or, more importantly,
- 8:26a ratio change. So, let's get to rule
- 8:28number two or negation number two.
- 8:32Don't pour so much.
- 8:35When people come to the world of
- 8:37pour-over, the first recipe that they
- 8:38decide to use is the 4:6. 4:6 is great.
- 8:42It's my good friend Tetsu Kasuya. He's a
- 8:44fantastic brewer. The issue is is it's
- 8:47reliant on a pretty good grinder. Now,
- 8:49some of you may have a crap grinder and
- 8:50enjoy 4:6. I'm not I'm not negating you.
- 8:52I'm trying to speak to the general
- 8:53public, to the people at large, to the
- 8:55fact that the majority of people that go
- 8:57in and try a five-pour method with a
- 8:59cheap grinder has bad results. I don't
- 9:01like five pours, and I have $4,000
- 9:03grinders. That's just not my bag, baby.
- 9:05I don't like extraction that is garnered
- 9:07from excessive agitation. When you pour
- 9:09five different times, even with a set
- 9:11amount of water, you're going to get a
- 9:13lot more agitation. You're going to get
- 9:14a lot more discharge of particles
- 9:16through the filter paper. It's going to
- 9:17obfuscate your palate more. You may
- 9:19enjoy a more bitter type of cup. You may
- 9:21enjoy
- 9:22a bit more of that uh faux body,
- 9:24[snorts] I like to call it, that comes
- 9:26out because you get more of the
- 9:26particles in the cup. That might be your
- 9:28bag, and there's nothing at all wrong
- 9:31with it. But for the majority of you,
- 9:33you're trying five pours cuz that's what
- 9:35you see as the most viral recipe online,
- 9:37and it's not working out for you. What
- 9:39do you do? Lessen the pours. There is a
- 9:42direct correlation between extraction
- 9:44and the amount of pours you make. And
- 9:45I'll show that now. We'll do two more
- 9:47brews. I'm going to do one with just a
- 9:48two-pour recipe. I'm going to brew one
- 9:50with a five-pour. The differences should
- 9:52be pretty stark. Let's do it.
- 9:56I like to find what I want in the cup,
- 9:59not necessarily the extraction number.
- 10:04We don't need to get those extra
- 10:05percentage points in order to get the
- 10:07good things. When we keep getting higher
- 10:09in extraction, we're getting other
- 10:10things that we don't want. Higher
- 10:11extraction does not equal good. Higher
- 10:13extraction means we got more of the
- 10:15bean, but we're not dictating what part
- 10:17of the bean. You can get 22% in multiple
- 10:19different ways with multiple different
- 10:20compounds. Some of them may taste pretty
- 10:22good, some taste like absolute crap.
- 10:27All right. So, I just brewed two
- 10:29different ones. Here was a 5:4 recipe.
- 10:31This was 2:00 pour. Now, what I did so
- 10:33that the time would not be crazy
- 10:35different is I allowed my 2:00 pour to
- 10:37bloom for 2 minutes. That way
- 10:40it it's saturating a lot longer. It can
- 10:42be a bit more equal as far as the
- 10:43contact time. On brew one, which was
- 10:46kind of a 4:6 method, it took about 4
- 10:48minutes and 2 seconds for the full
- 10:50drawdown. My final pour is about 2
- 10:52minute and 20 seconds. I waited around
- 10:5340 seconds between in each pour or so.
- 10:56And as you can see, the walls the the
- 10:59where the grounds go don't go that high
- 11:00up in the filter. It looks really nice
- 11:02and clean, but it's because I was doing
- 11:03multiple pours and it wasn't really
- 11:05filling up that high. A lot of those
- 11:06fines and particles and etc. are trapped
- 11:09into the bed or were kind of released
- 11:10through that filter because every time
- 11:12we poured, we rejuvenated the bed. It
- 11:15would go up and
- 11:16flow around and shake everything up. It
- 11:19was able to go through a bit quicker
- 11:20before the final two rounds. On the
- 11:23final two rounds, we had just shoveled
- 11:25the bed so much, it had clogged the
- 11:27filter so much that those final two ones
- 11:29took a lot longer to drain. Even with my
- 11:31$4,000 grinder with low fines burs, this
- 11:34still took over 4 minutes, 4 minutes and
- 11:362 seconds to draw down. And I was done
- 11:38pouring at 2 and 1/2 minutes.
- 11:40Imagine if you have a hand grinder that
- 11:42produces a lot of fines and you're
- 11:43trying to dial in the 4:6 as a new
- 11:45home enthusiast. That's going to be
- 11:47really difficult, very frustrating.
- 11:49You're going to have muddy beds, it's
- 11:50going to look awful, you're going to get
- 11:51so mad, and you're going to go so coarse
- 11:53before you get a reasonable drawdown
- 11:55time under 8 minutes. The second one, I
- 11:58did essentially a 2 minute bloom and
- 11:59then I just poured all the way till I
- 12:01got my final end weight. Now, obviously
- 12:03with this, we used a lot more of the
- 12:05filter. It won't look as pretty because
- 12:07as it was drawing down, we were adding
- 12:09more and more water to kind of keep
- 12:11things in check. So, when we look at
- 12:12this bed, you see that we have a ton of
- 12:14fines trapped in the walls, which is
- 12:16actually great. If we were to dehydrate
- 12:17this filter, cut that off, measure the
- 12:19amount of fines, that would be at least
- 12:21a gram or of fines, which is going to
- 12:24help us improve the coffee, less of that
- 12:27kind of astringency bitterness in the
- 12:28cup, but it's going to be a much lower
- 12:30extraction. We weren't continuously
- 12:32adding new solvent. Right when we poured
- 12:33all that water in, it turned into coffee
- 12:35essentially, and it was concentrating as
- 12:37it was percolating through, almost like
- 12:39a mini immersion. Let's measure these
- 12:41and taste them.
- 12:47Obviously, contact time's going to be
- 12:49different because the more you pour, the
- 12:51longer the in contact it's going to be
- 12:53because it's slowing down the efficacy
- 12:55of the filter, whereas this one, you're
- 12:57pouring kind of twice, yada yada yada.
- 12:58But, you have to do a lot more
- 13:02things like more fine grind or or higher
- 13:04temperature or something in order to
- 13:06increase extraction of the two pour
- 13:08versus the five.
- 13:10As you can imagine, the 5:4 extracted
- 13:12quite a bit more than the two pour, 2%
- 13:15extraction difference. They're also
- 13:17going to taste vastly different, so it
- 13:19doesn't super matter on the The other
- 13:21one was was easy as well, but anyway. I
- 13:24don't really like doing blind tasting on
- 13:25camera because it's really
- 13:27I mean, it What does it really show when
- 13:29it's I like I I I could be doing I could
- 13:30be lying and doing camera tricks, right?
- 13:32I can tell you my experience off camera,
- 13:35which is done with blind tasting, or I
- 13:36can do it on camera. Either way,
- 13:39it's either you trust or don't, right?
- 13:40Anyway, so.
- 13:42But as you see on the 5:4, especially
- 13:43for new new home enthusiasts, new
- 13:45baristas, new people to coffee, people
- 13:48with lower, you know, more higher fine
- 13:50fines producing machines like espresso
- 13:52forward grinders, things like that, the
- 13:545:4 is much more difficult to really
- 13:56dive into and dial in well. Vastly
- 13:59vastly different. Way way way, I guess
- 14:02you could say smoother or silky body.
- 14:04This one has definitely some
- 14:05astringency. It's got kind of
- 14:08like
- 14:10it's rough on the tongue, I should say.
- 14:11It's kind of like sandpaper on the
- 14:12tongue, whereas this one is incredibly
- 14:13tea like, incredibly
- 14:15fantastic. Don't go rush change your
- 14:17grind size. Don't rush and do all these
- 14:18things. First, maybe take a pour off.
- 14:20That's going to lower the extraction
- 14:22quite a bit, and it's likely going to
- 14:24cause a better tasting cup for you. This
- 14:26one is going to be a lot lower
- 14:28extraction than what a lot of people
- 14:29would want. So, if you want to do this
- 14:30type of brew and you want it to be
- 14:32stronger, go finer grind, go higher
- 14:34temperature, do a bit more agitation
- 14:36like maybe do some swirls to slow down
- 14:38the drawdown. Do maybe two blooms
- 14:40instead of one bloom. Do something along
- 14:42those lines in order to bolster up the
- 14:44extraction. And the third imperative,
- 14:47stop switching your dripper daily. You
- 14:51you do what you want with your money,
- 14:53but I don't want people to have this
- 14:54FOMO, this this this fear that they're
- 14:56missing out on something. There is such
- 14:58an obsession with There's a new dripper
- 14:59out. Oh, it promises to give me a more
- 15:01even extraction. It promises to give me
- 15:03a more full cup. It promises Shut up the
- 15:05noise. Find one way that works well
- 15:08across these things and get good at it.
- 15:10Once you're able to do that,
- 15:12then okay, maybe you can expand to a
- 15:14flat bottom or something like a an
- 15:16Aeropress or a no bypass or something
- 15:18along those lines. But to have four
- 15:20different cone brews because one has a
- 15:21slightly more angle or slightly less
- 15:23angle,
- 15:24that's not going to cause any difference
- 15:27at all. Maybe if you use the same recipe
- 15:29copy paste, it's going to be different,
- 15:30sure, but you can you can make very
- 15:32similar cups depending on your dose size
- 15:34and the way you're grinding and the way
- 15:35you're pouring. Understand extraction
- 15:37variables and dynamics. Understand how
- 15:39the changes affect the flavor for your
- 15:42palate. Once you get to that point,
- 15:44you're not going to have feel that need
- 15:45to switch out all the time. You're going
- 15:46to find ways to manipulate the dripper
- 15:48you have in order to make it fantastic
- 15:50for you.
- 15:52What do I use every day? A V60. The only
- 15:54time I switch up at all, in case you are
- 15:56curious, is on very rare occasions if I
- 15:59have only eight or seven or eight grams
- 16:01of a coffee left or if it's in the
- 16:03evening and I want a little caffeine but
- 16:04not a lot, and I want a seven or eight
- 16:06gram dose, I will use the Cafec Deep 27.
- 16:09But that's quite rare.
- 16:13>> [music]
- 16:14>> Now, there are two more kind of side
- 16:15things of what not to do, and it could
- 16:17sound counterintuitive to what I said
- 16:19earlier, contradictory even, but do not
- 16:21worry about total brew time. How long
- 16:23should I be aiming for this to come out?
- 16:24I can't give you a total brew time
- 16:26because your grinder may take longer to
- 16:28draw down than mine. But maybe at 3
- 16:30minutes, yours tastes great and mine at
- 16:322:20 tastes great. They're going to be
- 16:33different tastes cuz they're different
- 16:34grinders. Maybe a 6 minute brew is great
- 16:37for you. Maybe a slight muting of the
- 16:39aromas due to the excess contact time is
- 16:41actually preferable to your palate. I
- 16:44see people that say, "Oh yeah, coffee
- 16:45tasting just comes easy to me." What
- 16:47does that even mean? Everybody enjoys
- 16:49coffee in their own way. What I'm trying
- 16:52to say though is, don't sit there and
- 16:53think
- 16:54I need to do it in 3 minutes because if
- 16:56it is prolonged contact time, it's going
- 16:58to mute the aromas.
- 17:00You might like [music] muted aromas.
- 17:01Don't worry about contact time as much.
- 17:03The final one is,
- 17:05when you're changing variables, don't be
- 17:06so quick to change your grind size
- 17:08first.
- 17:09You can play with temperature, you can
- 17:11play with ratio, you can play with your
- 17:13pour structure. I wouldn't be so quick
- 17:14to change grind size. Once you find one
- 17:16that works across a lot of coffees,
- 17:18it's going to work across a lot of
- 17:20coffees. I almost never change my grind
- 17:23size. Whether it's on a hand grinder or
- 17:25on one of my electric grinders, I'm just
- 17:27static at a grind size when it comes to
- 17:28pour overs. So, in so in
- 17:31some conclusion,
- 17:34play with things other than boiling. You
- 17:36don't need to rely on boiling. So, if
- 17:37you're at elevation, you're fine. Don't
- 17:39worry that you're missing out on the
- 17:40flavors. In fact, what you're doing is
- 17:41you're probably having better coffee
- 17:42than a lot of these people who are
- 17:43drones saying, "Boiling water, boiling
- 17:45water." Don't boil, okay? If you do
- 17:48enjoy boiling it, I don't I don't care.
- 17:49This is tell everyone else. Chill.
- 17:52Number two,
- 17:53don't pour a thousand times. [music]
- 17:55Tetsu's great. His championship routine,
- 17:57incredible. He was using a nice grinder
- 17:59and coffee that required what he needed
- 18:00to do, and he wasn't extracting it that
- 18:02highly cuz he was grinding as coarse as
- 18:04boulders. And a lot of you wouldn't like
- 18:05the brew that he made because it was a
- 18:07really funky coffee, really coarse
- 18:08grounds, cool water, low extraction,
- 18:11just lots of pours because it helped in
- 18:13his routine. That's why you can't trust
- 18:14championship routines. They're doing it
- 18:16based off of a clock system. They need
- 18:18to hit certain pours at certain times or
- 18:20they're or they're docked points. Try
- 18:21four. Try three. Whatever. Play around
- 18:24with it. Understand that the more you
- 18:26pour, the more your grinder quality is
- 18:27going to come into play as regards
- 18:29clogging clogging your brew and having
- 18:31slower drawdowns and getting things into
- 18:33your final cup. Third one,
- 18:37stop changing these every day. Stop
- 18:39buying every single one that comes out
- 18:40unless you want to. It's your day, I got
- 18:41money. But, this is going to make things
- 18:43more confusing for you. You're going to
- 18:45learn a certain way for flat bottom, a
- 18:46certain way for flat bottom, a certain
- 18:47way for cone cone, for cone, and a
- 18:49certain way for no bypass. And it's
- 18:51going to mess with you. Pick one, stick
- 18:53with it, make it good on everything. And
- 18:56the last little two fun ones, stop
- 18:57worrying about your time. Don't worry
- 18:59about time, and don't play with your
- 19:01grind size too much. Find one that
- 19:02works, stick with it. In the future,
- 19:05once you get once you have a handle of
- 19:07all the other variables and how they
- 19:08affect your pour,
- 19:09then put then play with grind size.
- 19:11Anyway, that's it for me today. I hope
- 19:12that you enjoyed this. I hope that it's
- 19:14going to help you brew even tastier
- 19:15coffees than you were earlier today.
- 19:17But, regardless of what you do, whether
- 19:19you heed my advice or not, whether you
- 19:21you know, click subscribe or not,
- 19:23whether you do any of this stuff, it it
- 19:24doesn't matter. The only thing that
- 19:26matters is
- 19:28I hope that you brew something tasty
- 19:29today.
- 19:30And cheers.
About this transcript
This page contains the full transcript of Don’t Do These 3 Things When Brewing Pour-Over by Lance Hedrick, generated from the public captions YouTube serves with the video. The transcript has 4,151 words across 610 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.