YouTube transcript (dI-CCIe0m0Q) — Transcript
Full transcript
- 0:01Yes, hello. This is Director Geon. Yes,
- 0:03let's proceed with today's lesson.
- 0:06Today's topic is canopy and cantilever.
- 0:08You can listen with a bit more ease
- 0:10than the previous topics I explained.
- 0:13These are simple concepts, but since
- 0:15they appear frequently in exam
- 0:17questions, you should think them
- 0:20through. First, if you look here, the
- 0:23title says canopy and cantilever, but
- 0:25there is no structural difference
- 0:27between them. Yes. Some people call it
- 0:31a canopy and others a cantilever, but '
- 0:34cantilever' seems to be more of a
- 0:36structural term. 'Canopy' seems to be
- 0:39used more often by architectural
- 0:41designers. There is that kind of nuance
- 0:44. Let's proceed. Yes. Are canopies and
- 0:50cantilevers the same or different? Yes,
- 0:52yes. Only the terminology differs;
- 0:55their structural function and mechanism
- 0:58are identical. Yes. And has the term '
- 1:01canopy' ever appeared in an exam? As
- 1:02far as I can tell, it hasn't appeared.
- 1:04Not since 2009. Yes. But the reason I
- 1:07brought up the word canopy is that
- 1:09architectural designers use it. And it
- 1:11is generally used a lot. In practice.
- 1:13Yes. So, just in case you get confused,
- 1:17the structural systems for a canopy and
- 1:19a cantilever are no different. I wanted
- 1:22to mention that first. Next, yes, as
- 1:25you know, a canopy or cantilever is a
- 1:28structure projecting out with a free
- 1:30end. It’s a form where a slab extends
- 1:33a certain distance from a column, which
- 1:36we call a canopy or cantilever. If I
- 1:38had to distinguish them, I personally
- 1:41think 'canopy' is a narrower term,
- 1:44while 'cantilever' is broader.
- 1:46Personally. Yes, I mentioned what's
- 1:49below earlier. It has never been asked
- 1:51as a question under the term 'canopy'.
- 1:52It is usually asked using the term '
- 1:54cantilever'. Hmm. Now, I’ve put this
- 1:59up to show you how often 'cantilever'
- 2:02has appeared in past exams, starting
- 2:05from 2009. So, here is a floor plan. If
- 2:08you look at this plan, there are no
- 2:10parts projecting beyond the columns.
- 2:11Yes. In 2009, it was not featured as a
- 2:15structural item called a cantilever.
- 2:21Looking at 2010. There are no
- 2:23cantilever sections visible elsewhere.
- 2:25Right here, this part indicated here,
- 2:27this is the cantilever. Usually, when a
- 2:29part projects out like this as a
- 2:31cantilever, as I mentioned earlier, it
- 2:34is generally called a canopy in
- 2:36architectural design. And there is a
- 2:37high probability that something is
- 2:38underneath it. Right. There is a high
- 2:40probability of an opening or an
- 2:41entrance there. That's generally
- 2:42correct. When you enter a building, you
- 2:45might notice small slabs or structures
- 2:49protruding about a meter or so above
- 2:52entrance doors or doorways. That is
- 2:54exactly what a cantilever structure is.
- 2:55Yes. In 2010, this level of application
- 2:58was used for the cantilever. Now,
- 3:01moving on. The characteristic of the
- 3:052011 exam, as I mentioned in another
- 3:08video clip, is that you can consider it
- 3:11as having two problems in one. This RC
- 3:14part and the steel structure part. They
- 3:17are clearly separated here. If you look
- 3:20closely, they might look connected, but
- 3:22the RC beams and steel beams are
- 3:23installed as double beams in almost the
- 3:25same position, which means they are
- 3:27completely separated as individual
- 3:28structures. So, the cantilever parts
- 3:32were located on the left and right
- 3:34sides of the steel structure. Yes. It's
- 3:39a typical cantilever structure. Next,
- 3:43for 2012, as you can see here, the 2012
- 3:46problem is an RC problem where the
- 3:49cantilever was formed outward from the
- 3:52columns. Yes. It was featured in the
- 3:55exam. The 2013 problem was presented
- 3:58with the cantilever protruding outward
- 4:01by approximately 1m to 1.5 m. I have
- 4:04color-coded them for you. Since the
- 4:072014 problem was a purely lightweight
- 4:09steel structure, there were no RC slabs
- 4:11. And in this case, yes, there was no
- 4:14cantilever structure. There were no
- 4:17structures protruding out from the
- 4:19columns. Yes, there were none. The 2015
- 4:21problem didn't have any either. Yes. I
- 4:24recall that the 2015 problem was a bit
- 4:27difficult in terms of structural
- 4:30planning, specifically for the section
- 4:33including the stairs and the elevator.
- 4:37The overall problem format was quite
- 4:39easy and had a low difficulty level.
- 4:43Now, the 2016 problem. In 2016, there
- 4:44are parts protruding as cantilevers on
- 4:46the left and right. Yes. This part is
- 4:49the cantilever structure. Yes. So,
- 4:51looking through the problems where
- 4:54cantilevers were mentioned and featured
- 4:58, if you look at the frequency of
- 5:01appearance, it's not "very" frequent,
- 5:02but it's still an item that appears
- 5:04quite often. Therefore, you must have
- 5:07your own criteria for how to plan the
- 5:09structure for these cantilever sections
- 5:11. That is why I am explaining this
- 5:13through this video. Now, as you can see
- 5:16, most of what we call a cantilever is
- 5:18a structure that protrudes and sticks
- 5:21out from a column. So, as you can see,
- 5:24this part that meets the column is
- 5:25called the fixed end. Fixed end. Next,
- 5:28this part that sticks out freely on the
- 5:30outside is called the free end. Now,
- 5:32for the fixed end, if a cantilever
- 5:35structure appears on an exam and it's
- 5:38an RC structure, where should you
- 5:41primarily place the reinforcement?
- 5:44Right? At the top. Top reinforcement is
- 5:46the main reinforcement. Top
- 5:48reinforcement is the main reinforcement
- 5:49. So, you must look for the
- 5:51reinforcement where there is a lot of
- 5:53top bar placement. Uh, in the case of a
- 5:54steel structure, what kind of
- 5:55connection should you use? Exactly. A
- 5:56pin connection won't work. A pin
- 5:58connection will just spin and fail.
- 5:59Because it lacks resistance against
- 6:01that, when you plan a cantilever for a
- 6:04steel structure, you must use a moment
- 6:06connection. Keep these two things in
- 6:08mind. It’s important. So, when
- 6:11planning a cantilever structure, if
- 6:12there are columns, it is easy to form a
- 6:15cantilever structure at those column
- 6:17locations. It is easy. You only need to
- 6:20pay attention to a few things. For RC,
- 6:21consider the top reinforcement and the
- 6:24negative moment section as the main
- 6:27reinforcement. For steel structures,
- 6:29you just need to have the concept that
- 6:31you will use a moment connection for
- 6:32the joint. As long as you keep the
- 6:33concept of using a rigid connection in
- 6:35mind, it is not very difficult to
- 6:37handle this part. Yes. So let's
- 6:39double-check again. Now, let's look at
- 6:44the past exam years where cantilevers
- 6:46appeared, and you can see a cantilever
- 6:49here. As I mentioned earlier, the
- 6:52cantilever extends outward based on the
- 6:55column. It extends outward based on the
- 6:57column. In cases like this, structural
- 7:00planning is easy. Look here, what is
- 7:02the part extending as a cantilever
- 7:04represented as? It’s a rigid
- 7:05connection, right? You just need to
- 7:07distinguish things like moment
- 7:09connections. In the 2012 problem,
- 7:12it’s an RC structure, and there’s a
- 7:14cantilever section coming out of an RC
- 7:16column. Since it comes out from an RC
- 7:18column, I said you only need to be
- 7:20careful with the reinforcement at that
- 7:22point. It’s labeled B here, right?
- 7:25Taking a guess, is B the top
- 7:26reinforcement? Or is it the bottom
- 7:28reinforcement? Right. Top reinforcement
- 7:30is the main reinforcement. That’s all
- 7:32you need to know. Got it? 2016 exam
- 7:34problem. Yes. It’s just an enlarged
- 7:37view of what I showed you earlier.
- 7:40Looking at the left, a cantilever beam
- 7:42extends from the column to form the
- 7:43structure. On the right, a cantilever
- 7:45beam also extends from the column to
- 7:47form the structure. Yes. Now, although
- 7:50I've changed the order, if you look at
- 7:52the 2010 problem, the cantilever
- 7:55section doesn't extend from here, does
- 7:57it? It doesn't extend from the column.
- 7:59And what is easy to form when it
- 8:00extends from the column? It’s easy,
- 8:02isn't it? When you are doing structural
- 8:03planning, that's right. It’s easy to
- 8:05form a fixed end from the column. But
- 8:08in cases where it extends from a beam,
- 8:11you shouldn't just plan the cantilever
- 8:13structure itself. It’s peculiar,
- 8:16isn't it? For the distance the
- 8:18cantilever extends outward, what did we
- 8:20install on the opposite side? We
- 8:21installed a beam. And what did we use
- 8:23to tie this part together? We tied it
- 8:25with a rigid connection. A moment
- 8:27connection. You need to look at this
- 8:28carefully. After you've done the
- 8:30structural planning up to this point,
- 8:31there are those who don't do the moment
- 8:33connection. After planning up to here,
- 8:35the moment connection is done, but
- 8:37those who don't plan a beam on the
- 8:39opposite side, or those who plan well
- 8:41but don't do the moment connection
- 8:44where it meets the beam on the opposite
- 8:46side. Well, there are many places where
- 8:49you can make mistakes. Even in this one
- 8:51spot. So you need to look at this
- 8:52carefully. Therefore, in the 2010
- 8:55problem, since the cantilever did not
- 8:58protrude from the column, in cases
- 9:00where it protrudes from a beam, you
- 9:02can't just plan that part; you have to
- 9:05plan up to the opposite side. You
- 9:09should have questions about why a beam
- 9:11must be planned up to the opposite side
- 9:13; it is important. This beam cannot
- 9:16withstand this cantilever structure
- 9:18with its torsional stress and torsional
- 9:21resistance. It will just twist and turn
- 9:24. Then the cantilever will rotate and
- 9:27fail. Even if this transverse beam is
- 9:31connected between columns, it will
- 9:34twist due to torsion. Then the
- 9:37structure will collapse. To prevent
- 9:40that, we add a beam on the opposite
- 9:43side, matching the length, to balance
- 9:46it. And then, what kind of connection
- 9:48should you use? Use a moment connection
- 9:50. So the 2010 problem is one of the
- 9:52important ones to consider when
- 9:54thinking about cantilevers. Did you get
- 9:56that? Yes. Now, the 2013 problem. The
- 10:002010 problem is important. Looking at
- 10:03the 2013 problem in terms of
- 10:05cantilevers, it looks like it extends
- 10:08right from the column. It’s not a big
- 10:10problem. But there are two spots, the
- 10:12ones I marked with clouds here and here
- 10:15, that have what missing? There are no
- 10:17columns. When there are no columns, as
- 10:20I mentioned before, you need to think
- 10:22about how to connect the cantilever
- 10:23structure. This part isn't quite clear.
- 10:26If you look at this problem from the
- 10:28past year and zoom in, you can see how
- 10:30they handled the cantilever by
- 10:31connecting the moment connection and
- 10:33the pin connection. Do you understand?
- 10:35Yeah. So, While cantilever problems
- 10:41aren't that difficult, there are one or
- 10:44two things you need to consider, just
- 10:46like I mentioned earlier. And where do
- 10:49those considerations mainly arise? It
- 10:51becomes an issue when it extends from a
- 10:54beam, not when the cantilever comes out
- 10:56from a column. For this video, I'll
- 11:00just leave you with the problem to
- 11:02think about. I will have a chance to
- 11:04explain this part later on. Yes, I will
- 11:07. I plan to create a separate clip for
- 11:10that later, and the reason I’m not
- 11:13explaining it now is that it’s
- 11:15something you should reconsider after
- 11:18studying rebar work in the next section
- 11:21. After studying rebar in RC structures
- 11:23, I will ask you another question: Is a
- 11:26main beam and a sub-beam absolutely
- 11:29necessary when planning a cantilever
- 11:31structure? Can you plan a cantilever
- 11:34without using main or sub-beams? What
- 11:37this means is, can the slab extended as
- 11:40a cantilever be supported without beams
- 11:43, such as main or sub-beams? Just with
- 11:46the slab. So, can a cantilever be
- 11:49supported only by a slab? Well, it’s
- 11:51not impossible. It is possible.
- 11:54Depending on what? It depends on the
- 11:56length, as I explained below, right?
- 11:58You need to think about whether a
- 12:00cantilever can or cannot be supported
- 12:02by the slab alone. It’s an important
- 12:04point when you're discussing structural
- 12:06design: "This part is a cantilever,
- 12:07should I add a beam?""Or should I just
- 12:09support it with the slab?" Of course,
- 12:12if the prompt clearly states that the
- 12:14cantilever length is short, so you
- 12:16should support it with only the slab,
- 12:19you don't need to worry, but if there's
- 12:22no mention of it and the extension is
- 12:24short...Then, in structural practice,
- 12:26since there are cases where you handle
- 12:29it with just the slab without adding a
- 12:31beam, you need to consider whether such
- 12:34a structural plan is appropriate for
- 12:36your answer. Do you understand? Yes,
- 12:39yes. I’d like to wrap up this video
- 12:42briefly. Since you can't just ignore
- 12:46cantilevers when doing structural
- 12:47planning, I’ve briefly talked about
- 12:50the mindset and theoretical approach
- 12:52you should have regarding protrusions
- 12:54like canopies and cantilevers. Yes.
- 12:58I'll have a chance to explain the
- 13:00cantilever reinforcement separately
- 13:02later, or show it in a video, so I'll
- 13:04keep this explanation brief for now.
- 13:07Yes. The next topic we need to cover is
- 13:10the transverse girder. Yes. Once you
- 13:12finish the transverse girder, the main
- 13:14structural plan is more or less
- 13:16complete. Everything else that follows
- 13:18is...Yes. Secondary details or
- 13:21refinements, so once you've learned up
- 13:25to the transverse girder, I personally
- 13:29believe the structural planning for the
- 13:32main frame is mostly done, from the
- 13:36columns to the girders, so I'll wrap up
- 13:39this lecture here. Yes. Thank you.
About this transcript
This page contains the full transcript of YouTube transcript (dI-CCIe0m0Q) , generated from the public captions YouTube serves with the video. The transcript has 2,185 words across 335 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.