КАК ПОВЫСИТЬ ФПС В CS2? | ЛЕТНЯЯ ОПТИМИЗАЦИЯ НА 300+ FPS (2026) — Transcript
Full transcript
- 0:05Dear friends,
- 0:06hello, gamers. In the last video,
- 0:09YouTube apparently hit an overload of
- 0:11mass and decided not to push it to the
- 0:12masses just to avoid traumatizing your
- 0:14already shaken psyches from the
- 0:16incessant freezes. But Domikun does not
- 0:18forgive such jokes, and no matter how
- 0:20hard some unknown forces try to shield
- 0:22you from a comfortable and pleasant
- 0:24game, I will fight for every one of
- 0:26your FPS until the end. As usual, in
- 0:29this video, I will walk you through a
- 0:31truly powerful guide on optimizing CS,
- 0:33and I promise that the FPS you are
- 0:35always lacking in clutches or important
- 0:37rounds will increase, input lag,
- 0:38terrified of your optimizer aura, will
- 0:41naturally decrease, and constant
- 0:42freezes every 10 seconds will no longer
- 0:44bother you. Let's go. To start, let's
- 0:47configure Steam, as it and its
- 0:49background services are constantly
- 0:50running during gameplay and thus eating
- 0:52up our precious FPS. In the top left
- 0:54corner, we see Steam. Click settings.
- 0:56Here, we go to Friends and Chat. We
- 0:58enable the compact view for the friend
- 1:00list and chat, as well as the compact
- 1:02view for the favorite friends area.
- 1:03Next, scroll down a bit and enable the
- 1:05last two checkmarks, disabling chat
- 1:07spellcheck and animated effects. Next,
- 1:10we go to the notifications section. Set
- 1:11this to never. Disable all these
- 1:13checkboxes here. Set this to never as
- 1:15well. And disable all checkboxes here
- 1:17too. Next, we go to the interface
- 1:19section. Scroll down a little further.
- 1:21Here, where a restart is required, turn
- 1:23off these three checkboxes. Next, go to
- 1:25the library tab and select low
- 1:27performance mode. Then go to the
- 1:28In-Game tab and we see: Enable the
- 1:30Steam Overlay while in-game. Disable it
- 1:32. What is the Steam Overlay while
- 1:33in-game, anyway? It's Shift-Tab. If you
- 1:35aren't a streamer who needs to check
- 1:37chat in the overlay browser, or if you
- 1:39don't even use this Shift-Tab, you can
- 1:41safely turn it off, as this will
- 1:43disable an entire package of background
- 1:45services, which will provide not just a
- 1:46tiny boost, but a truly significant
- 1:48result. And you can add up to 30 FPS on
- 1:51mid-range or high-end PCs, or up to 15
- 1:54on weaker ones. Next, go to the
- 1:56Accessibility tab and enable reduced
- 1:59motion. Next, go to the voice tab and
- 2:01scroll down a little. Turn off advanced
- 2:03settings, echo cancellation, and noise
- 2:06cancellation. Leave only automatic
- 2:08volume/gain control enabled. This will
- 2:10not only increase FPS but also make
- 2:11your microphone sound a bit better
- 2:12in-game. Next, go to the Remote Play
- 2:14tab and turn off Remote Play. You can
- 2:16exit from here now. Right-click on CS2
- 2:18in the library and select properties.
- 2:21Scroll down a bit, we see launch
- 2:23options. Copy the launch options from
- 2:25the description of this video and paste
- 2:26them here. You might ask: "Is that
- 2:28really all the launch options?" And I
- 2:30will answer: "Yes." Because there are
- 2:31no other launch options. There simply
- 2:33aren't any. This isn't CS: GO, where
- 2:35there were just a billion parameters
- 2:37you could enter that would actually
- 2:38help you. Unfortunately, the developers
- 2:40removed that in CS2; they switched to a
- 2:42new engine, removed all of that, and
- 2:44only these launch options remain, which
- 2:46I'll explain what to do with now. Look,
- 2:48-refresh 300. You need to enter the
- 2:50refresh rate of your monitor here. For
- 2:52example, I have 300Hz, so I enter 300.
- 2:55If you have 60Hz or 144Hz, you enter
- 2:57your specific value accordingly. And
- 2:59FPS Max 0. What should you do with it?
- 3:01Look, after all the optimization, after
- 3:03you watch the whole video and complete
- 3:05all the steps, and I say that you can
- 3:07restart the computer, then restart it.
- 3:10After restarting, go into CS and run
- 3:12the benchmark. If your FPS is at least
- 3:15over 200 to 250, then limit your
- 3:17average FPS, which the benchmark gives
- 3:20you, by 5 to 10 frames. So, if you have
- 3:22, for example, 200 or 230 FPS there,
- 3:25then you set it like this. 200, 215, or
- 3:27, for example, 220. This will help you
- 3:31get rid of unnecessary stutters and
- 3:33lower your latency a bit. Next, we'll
- 3:35skip installed files for now and do
- 3:37that a bit later. Go to Controller and
- 3:39use the default settings. Set this to
- 3:41disable Steam Input. Next is privacy,
- 3:43and we'll make the game private. If you
- 3:46check this box, your status will be
- 3:47offline, and no one will be able to see
- 3:49that you are playing CS. If you play
- 3:51Faceit or you are a solo player, you
- 3:53can safely disable this. If not, your
- 3:55friends will have to find you in the
- 3:57friend list while offline and invite
- 3:58you from there. In any other aspect, it
- 4:01doesn't affect gameplay. And by
- 4:02disabling some services, this will give
- 4:04a boost of about five to six extra avg
- 4:06FPS, which can actually have a pretty
- 4:08good impact. Next, go back to the
- 4:11installed files section, click Browse,
- 4:13go to game, bin, 64, and here is cs
- 4:152.exe. Right-click, properties,
- 4:18compatibility. And here, make sure that
- 4:21you do not have the box checked for "
- 4:22Disable fullscreen optimizations."
- 4:24Click OK. Now click on the empty space
- 4:26in the file path once. Ctrl + C. Go to
- 4:29Start. Settings. Go to Gaming here.
- 4:34Game Mode. Turn on Game Mode. Graphics
- 4:36settings, browse. Click on the empty
- 4:39space again, Ctrl + V and Enter. Now
- 4:42select this cs 2.exe. Add. Scroll down
- 4:45a bit. It’s already added for me. And
- 4:47cs 2.exe. Select Options. Set it to
- 4:50High Performance and save. Also, check
- 4:52this box here. That's it. That's it for
- 4:54the Steam optimization. Next, let's
- 4:56move on to my passion project, the
- 4:58massive optimization pack I've been
- 4:59working on for two years, which is now
- 5:01even being stolen by million-subscriber
- 5:03YouTubers. But I don't mind, so no
- 5:04questions asked. Let's open the pack.
- 5:06First: creating a restore point. We
- 5:08must create a restore point so that if
- 5:10anything goes wrong, we can roll back
- 5:12to the settings we had before applying
- 5:13the pack. Like, I don't know, if the
- 5:15FPS drops or some system errors occur.
- 5:17Select the drive here where your system
- 5:18is installed. Click Configure, and
- 5:19enable system protection. Set this to
- 5:21about 5 to 10 percent. Click Apply and
- 5:24OK. Then click Create. Enter any name
- 5:27you want here. Click Create. There, the
- 5:33restore point has been created
- 5:34successfully. Now click Close. OK. Go
- 5:37back to the pack. Go into CP
- 5:39Optimization Pack, then CP Optimization
- 5:41. Highlight these four registry files.
- 5:43Click Merge and select Yes for all of
- 5:44them. Yes. If you have Windows 11 and
- 5:47don't see the merge option right there,
- 5:49look for "Show more options" at the
- 5:51bottom. Click that. And then you'll see
- 5:53the merge option there. Next, go back
- 5:55to packs, then pack Tweaks, and
- 5:56highlight everything. Click Merge.
- 5:58Click Yes for everything. Next,
- 6:00Optimization BINs. And look here, for
- 6:02all the batch files in this video, we
- 6:04run them as administrator one by one.
- 6:07So, it won't work like with the
- 6:08registry files where you can just
- 6:09highlight and click Merge. Here you
- 6:10have to run each one individually as an
- 6:12administrator. Next, if you have issues
- 6:14with the settings, skip them for now;
- 6:16for Windows basics, registries,
- 6:18highlight everything here, click Merge,
- 6:20and click Yes. Next, go into the test
- 6:22folder. And look here, first, normal—
- 6:25that's 26—is the most balanced
- 6:26setting between FPS and latency. Second
- 6:29, Best FPS—that's 28—is the value
- 6:31that will give you the highest FPS. And
- 6:34the third one is the setting that will
- 6:36minimize your input lag as much as
- 6:37possible. So, apply whatever you need
- 6:39and whatever you clicked on this video
- 6:41for. Next, go back to Windows basics.
- 6:44Performance. Enter it. Set everything
- 6:46here just like mine. Click OK. Next,
- 6:51Booster X software. Enter Booster X.
- 6:54Then go to the Optimization section.
- 6:57Look here: set Basic settings to
- 6:59Maximum, Security to Maximum, don't
- 7:00touch NVIDIA control panel
- 7:02customization or power plans, and set
- 7:04Tweaking to Optimal. Next, go to
- 7:06Privacy, set it to Maximum, and that's
- 7:07it. Don't touch anything else. The only
- 7:09other thing you can do is go to Startup
- 7:11apps and disable services that you
- 7:13don't need at all and don't use. Quite
- 7:16a large number of applications add not
- 7:18only their main process to startup but
- 7:19also additional services that cannot be
- 7:21disabled via the Task Manager. And a
- 7:23single program can have up to five such
- 7:26services. Consequently, many programs
- 7:28you haven't used in a long time run in
- 7:30the background without you even knowing
- 7:32. Just be very careful so you don't
- 7:34accidentally turn off something
- 7:36important. Next, let's go to the Tools
- 7:38section. Download Game X here, as it
- 7:40actually boosts performance by up to 10
- 7:41%. Just download it, add your game here
- 7:43, and you're good to go. It should run
- 7:45constantly while you play, meaning it
- 7:46stays in the background tray. That’s
- 7:48it for GameX. Let’s go back a bit.
- 7:50Open MemReduct. Click on File, then
- 7:53Settings, then General. Check the
- 7:55second, third, and second-to-last boxes
- 7:57. Next, go to Memory Cleaning. Check
- 7:59the first, second, and last boxes. Also
- 8:02, if you can change anything here,
- 8:04check these two boxes. Set this to 90
- 8:06and this to 30. That's it, close the
- 8:07settings. Now, let's go into these
- 8:09settings here. Turn on the first three
- 8:10checkboxes. Disable the last one. Done,
- 8:12MemReduct is all set. MSI Utility v3.
- 8:15Open it and find your graphics card.
- 8:17Check the box next to it and set it to
- 8:19"High". Hit Apply and exit. Next is
- 8:22Process Lasso. Just install Process
- 8:23Lasso. I accept. Next. Install. Done.
- 8:27After installing Process Lasso, you
- 8:29need to launch your game. I'll do that
- 8:30now and be right back with you.
- 8:32Unfortunately, for some unknown reason,
- 8:34my CS2 decided to just uninstall itself
- 8:36. Well, that's okay, it's not a big
- 8:38deal. I'll use Knightfall as an example
- 8:41, but you should have CS2, that is,
- 8:43Counter-Strike. CS2. It's all literally
- 8:46identical. I'm just using a different
- 8:47game for the example. Look, scroll down
- 8:50in Process Lasso and find CS2. Set CPU
- 8:53priority to Always High, I/O priority
- 8:56to Always High, and GPU priority to
- 8:59Always High. That's it, don't touch
- 9:01memory priority or anything else. Done
- 9:03with Process Lasso. It needs to run in
- 9:05the background while you play. It
- 9:07should also stay in the tray. Look, if
- 9:09it doesn't open automatically when you
- 9:11turn on your PC, just open Process
- 9:13Lasso before you start the game. And
- 9:16then forget about Process Lasso. Just
- 9:17minimize it to the tray and that's it.
- 9:19Next, the Skid power plan. Go in, copy
- 9:21all of this, press Win + R, and type
- 9:24PowerShell. Once in PowerShell, press
- 9:27Ctrl + V and then Enter. That's it, we
- 9:31can close this. We now have the Skid
- 9:33power plan. Look at what's next. Park
- 9:35Control 64. Okay, accepting. Next,
- 9:38install. Installing Park Control. Now
- 9:41right here, where you have an empty
- 9:43space, in this empty space select CS2
- 9:45low latency. Make active. Apply. Okay.
- 9:48Park Control should also run in the
- 9:50background while you play. And it
- 9:51should automatically launch whenever
- 9:54your system starts up. That's it, we're
- 9:56done with the programs. Now for some
- 9:58useful batch files. Run this batch file
- 10:00as administrator. Next, go to Registry
- 10:03Utils. Highlight everything here, merge
- 10:04, and click yes for everything. Next,
- 10:06go to Video Card Registry. And look,
- 10:08there are files for both AMD and Nvidia
- 10:10here. I'll show you what to do for
- 10:12Nvidia first, since I have an Nvidia
- 10:13card, then for AMD. Go into Nvidia,
- 10:15Nvidia batch files. Run all these batch
- 10:18files as administrator, one by one.
- 10:20Next, highlight all these tweaks, merge
- 10:22, and click yes for everything. Next,
- 10:24for those with an AMD card, go into the
- 10:26AMD folder, highlight all these tweaks,
- 10:27merge, and click yes for everything.
- 10:30Next, go back to Registry, General.
- 10:32Copy these two tweaks, merge, and click
- 10:35Yes. Next, go back a bit, copy all
- 10:37these files, merge, and click "Yes" for
- 10:38everything too. That's all for the pack
- 10:41. As for the settings for our beloved
- 10:43CS, everything is highly individual.
- 10:46For example, I set the game up for
- 10:48performance, which is why my settings
- 10:50are like this. You can use ready-made
- 10:53settings from the pros. For example,
- 10:56here are M0NESY, donk, and s 1 mple's
- 10:58settings, but if you can be bothered,
- 11:00set it up yourself. Next, Nvidia
- 11:02Control Panel settings. Open the Nvidia
- 11:04Control Panel. First, adjust video
- 11:06color settings. Set to "With the Nvidia
- 11:08settings". Go to Advanced and set it to
- 11:11Full. Next, scroll down to Adjust video
- 11:14image settings and set it to inverse
- 11:17telecine. Next, go to Change resolution
- 11:19and set it to "Use Nvidia color
- 11:21settings". Set this to Highest RGB and
- 11:24make sure to set this to Full. Don't
- 11:26touch this. Next, go to Adjust desktop
- 11:29color settings. And here, set the
- 11:31digital vibrance higher. The image will
- 11:33look better than the default value of
- 11:3450, by the way. I, for example, set it
- 11:36to 85. The image will be more colorful,
- 11:39saturated, and generally more pleasant.
- 11:41Just like in those montages. Next, go
- 11:43to the Adjust desktop size and position
- 11:46tab. Make sure to set it to Full-screen
- 11:48and set perform scaling on GPU. Always
- 11:51on GPU. Next, go to Manage 3D settings
- 11:53and set everything just like mine. Next
- 12:07, go to Set PhysX configuration and set
- 12:10it to your video card. That’s it,
- 12:12we’re done with the Nvidia control
- 12:14panel and the video as a whole.
- 12:16Important: if you have poor cooling or
- 12:18viruses from torrents, the optimization
- 12:20won't have any effect. For it to work
- 12:22properly, you need to fix the cooling
- 12:24first. Well, at least minimally. Take
- 12:26off the case cover, blow out the dust,
- 12:28and replace the thermal paste on the
- 12:30CPU. I also highly recommend applying
- 12:32the optimization to a fresh custom
- 12:34Windows, like RVI OS. And if you have
- 12:37an extra 10 bucks, just take the PC to
- 12:39a service center and they'll do it for
- 12:42you. Alright, thanks everyone for
- 12:43watching. Restart the PC and see the
- 12:46results. Bye.
- 12:48How? Where am I allowed to be touched?
- 12:50No,
- 12:51you know,
- 12:52no way, damn it, at 12. Well, you know,
- 12:57how and where am I allowed to be
- 12:59touched, cubes? Well, if only with a
- 13:01member we'll take second place.
- 13:03You know, happiness can be found.
- 13:05I condemn, I condemn, I condemn, I
- 13:07condemn. I condemn.
About this transcript
This page contains the full transcript of КАК ПОВЫСИТЬ ФПС В CS2? | ЛЕТНЯЯ ОПТИМИЗАЦИЯ НА 300+ FPS (2026) by DoMicun, generated from the public captions YouTube serves with the video. The transcript has 2,444 words across 365 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to translate the transcript into 100+ languages.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, translation to 100+ languages, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.