Chapter 5 - Phase Changes — Transcript
Full transcript
- 0:06So think about what we already know. Do
- 0:08temperature and thermal energy mean the
- 0:10same thing? No. Temperature can tell us
- 0:12the direction that the thermal energy
- 0:14will move from hot to cold. Temperature
- 0:16and kinetic energy are related. If
- 0:18temperature increases, so does the
- 0:20average kinetic energy. Also, kinetic
- 0:22energy is equal to 1/2 mv^
- 0:25multiple ways by translation, vibration,
- 0:27and rotation. As temperature increases,
- 0:30vibration and rotation forms of movement
- 0:31become more and more important.
- 0:34People often call thermal energy heat.
- 0:36But it turns out that thermal energy and
- 0:38heat are a little different. Thermal
- 0:40energy is the energy associated with the
- 0:41motion of particles. Heat is strictly
- 0:44defined as the transfer of thermal
- 0:45energy from one place to another.
- 0:47Remember, energy is transferred through
- 0:49collisions. We can tell it's transferred
- 0:51because the temperature changes as
- 0:52thermal energy is transferred from the
- 0:54hot object to the cold object. This can
- 0:56be confusing because people use the
- 0:58terms interchangeably even though
- 1:00they're not the same.
- 1:02We can quantify the heat of the
- 1:04temperature change using specific heat
- 1:05or heat capacity. This is how much
- 1:08energy it takes to change the
- 1:09temperature of a substance. Specific
- 1:11heat is the energy required to raise 1 g
- 1:13of a substance by 1°C or by 1.stance
- 1:20by 1°C or by 1. We can convert between
- 1:24the two using mass. On this table, we
- 1:27have molecules of increasing complexity
- 1:29and mass all with O groups. Look at the
- 1:32specific heats. What do you notice?
- 1:34Water specific heat is much larger. What
- 1:36information can we get out of that? If
- 1:39we add the same amount of thermal energy
- 1:41to the to 1 g of each of these
- 1:43substances, which would increase in
- 1:44temperature the most?
- 1:47If you chose propanol, you're correct.
- 1:49What is specific heat? Well, it's the
- 1:51amount of heat needed to raise the
- 1:52temperature of 1 gram of a substance by
- 1:531° C. If I had one gram of water, how
- 1:57much heat would I need to raise its
- 1:58temperature by 1° C? 4.18 Jew. If I had
- 2:01a gram of propanol, how much heat would
- 2:03I need to add to raise its temperature
- 2:041°C? 2.39 Jew. So, if we're adding the
- 2:08same amount of heat to 1 g of each
- 2:09substance, which will increase in
- 2:11temperature more? Propanol. Why? Its
- 2:14specific heat is lower.
- 2:17Let's say you did an experiment with two
- 2:19beers. One beaker had a gram of water
- 2:21and the other had 1 g of ethanol. You
- 2:24put the beers on the stove and start
- 2:25heating them, adding thermal energy at
- 2:27the same rate. Recording their
- 2:29temperatures and plotting them looks
- 2:30like this. Which of these curves is
- 2:33water?
- 2:35If you chose curve B, you're correct.
- 2:38How do you know? Well, the higher
- 2:39specific heat means it requires more
- 2:41energy to get to the same temperature.
- 2:43On this plot of temperature versus time,
- 2:45when thermal energy is added at a
- 2:46constant rate to equal masses of water
- 2:48and ethanol, it takes more energy to
- 2:50raise the temperature of water because
- 2:51it has stronger intermolecular forces to
- 2:53overcome. This is reflected in its
- 2:56higher specific heat.
- 2:58Here are the specific heats for a few
- 3:00different substances. Which substance
- 3:02will increase in temperature the most if
- 3:03the same amount of heat is added to 1 g
- 3:05of each?
- 3:08If you chose silver, you're correct. It
- 3:10requires the least amount of heat to
- 3:12raise its temperature 1° C.
- 3:14Which of these will increase in
- 3:16temperature the least?
- 3:19Hopefully, you chose liquid water.
- 3:21Notice how each phase of water has a
- 3:23different heat capacity. Why? What's
- 3:25different about steam and liquid water?
- 3:28Why does it take so much energy to raise
- 3:30the temperature of liquid water compared
- 3:31to steam? Well, what happens as we raise
- 3:34the temperature? The kinetic energy
- 3:36increases. For the kinetic energy to
- 3:38increase, we must overcome hydrogen
- 3:39bonds. When there are lots of strong
- 3:41intermolecular forces to overcome, it
- 3:43takes more energy to raise the
- 3:45temperature. The high specific heat of
- 3:47water is responsible for the temperature
- 3:49stability on Earth. Remember, 71% of our
- 3:52planet is covered by surface water. The
- 3:54water in our oceans serves as a
- 3:56temperature sink to keep us cool in the
- 3:57summer and warm in the winter. Mars has
- 3:59very little water, and temperatures can
- 4:01range from about 20°C during the day to
- 4:04150°C at night.
- 4:06Why does it take more energy to raise
- 4:08the temperature of liquid water compared
- 4:09to steam? Well, water molecules aren't
- 4:12interacting with each other in steam. An
- 4:14extra 2 JW per g° C are required to
- 4:17overcome the intermolecular forces
- 4:18present in liquid water.
- 4:21This diagram at the top represents water
- 4:23in the liquid phase. Which of these
- 4:25diagrams represents water in the gaseous
- 4:26phase?
- 4:29Hopefully, you chose A. Remember, in
- 4:31phase changes, bonds aren't broken. If
- 4:33bonds break, then a reaction has
- 4:35occurred.
- 4:37Let's look at another practice question.
- 4:39Does this form of water have
- 4:40intermolecular forces?
- 4:43Hopefully, you said no. Steam does not
- 4:45have intermolelecular forces. What about
- 4:48water in the liquid phase?
- 4:51If you said yes, you are correct. Let's
- 4:53look at this. So, does one water
- 4:55molecule have a state like a solid,
- 4:57liquid, or gas? Remember, the answer is
- 5:00no. We need multiple molecules to have a
- 5:03state of matter. If we have three gas
- 5:06particles shown here, there are no
- 5:08intermolecular forces because our gases
- 5:10do not interact.
- 5:12In liquid water, there are London
- 5:15dispersion forces, dipole dipole
- 5:16interactions and hydrogen bonds to
- 5:18overcome. This is why the specific heat
- 5:20for water in the liquid state is so much
- 5:21higher. These intermolecular forces need
- 5:23to be taken into account when you try to
- 5:25raise the temperature. Energy goes
- 5:27toward overcoming the intermolecular
- 5:28forces.
- 5:30As energy is added, it can increase the
- 5:32kinetic energy of a substance by
- 5:34increasing molecular motion and be used
- 5:36to overcome intermolecular forces in the
- 5:37substance if they're present. The
- 5:40stronger the intermolecular forces in a
- 5:41substance, the more energy is needed to
- 5:43overcome them, which makes the specific
- 5:44heat higher.
- 5:47What's the mechanism for adding thermal
- 5:49energy? How does it happen? Through
- 5:51collisions. When molecules have more
- 5:53energy, what's the consequence? What do
- 5:55they do at the molecular level? Well,
- 5:57they move faster through translation,
- 5:59rotation, and vibration. How can we
- 6:02measure this? How can we tell if energy
- 6:04is increasing? Well, we can measure
- 6:06temperature. If temperature increases,
- 6:09so does the kinetic energy.
- 6:11As we move from solid to liquid to gas,
- 6:13we have to add energy. Why? To overcome
- 6:16intermolecular forces. In the opposite
- 6:18direction, energy is released. Why?
- 6:21Because we are forming intermolecular
- 6:23forces. What happens during the phase
- 6:25change? Well, think about boiling water
- 6:27on the stove. We keep adding energy, but
- 6:29the temperature stays the same. What is
- 6:32that energy doing? Overcoming
- 6:33intermolecular forces.
- 6:39Now, let's look at a video of adding
- 6:41energy to our liquid water.
- 6:44Some of the molecules gain enough energy
- 6:45to overcome intermolecular forces and
- 6:47escape. Here we see the steam. As the
- 6:52liquid molecules move, they reorient
- 6:54relative to each other. At the surface,
- 6:56some molecules are escaping and some are
- 6:58recaptured by the liquid. It takes a lot
- 7:00of energy for the molecules to escape.
About this transcript
This page contains the full transcript of Chapter 5 - Phase Changes by UMN CHEM 1061, generated from the public captions YouTube serves with the video. The transcript has 1,208 words across 195 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.