YouTube2Text

BEST FILTER COFFEE GRINDER?: Is the Fellow Ode Hype or Reality? — Transcript

by Lance Hedrick · 3,880 words · 534 segments · language en · Watch on YouTube

Full transcript

  1. 0:00[Music]
  2. 0:05Oh, hey. I didn't see you there. I'm
  3. 0:08just brewing some coffee. Would you like
  4. 0:10a little bit?
  5. 0:12Well, let me get my cup and then we'll
  6. 0:13start the video.
  7. 0:15[Music]
  8. 0:19What's up everyone? Lance Hedrickk here
  9. 0:22and today we're going to take a look at
  10. 0:24the fellow Ode.
  11. 0:28[Music]
  12. 0:35So, the Fellow Ode was the most
  13. 0:37anticipated grinder release of 2020, and
  14. 0:40a lot of people have absolutely loved
  15. 0:42it, some people not so much. There have
  16. 0:44been a lot of reviews. I'm really late
  17. 0:46to the game, though I'm quite familiar
  18. 0:48with the Ode. Today I wanted to make a
  19. 0:50video going over it because I have a lot
  20. 0:52of thoughts regarding this grinder. So,
  21. 0:56first let's go ahead and just jump in.
  22. 0:57We're going to go over my likes and
  23. 0:58dislikes of the workflow and aesthetics,
  24. 1:00and then we're going to jump into the
  25. 1:02internals and the uh some things that I
  26. 1:04like about uh how it's programmed, how
  27. 1:06the motor works, and the bur sets
  28. 1:08themselves. But first, aesthetics. So,
  29. 1:11obviously, when looking at these, and
  30. 1:13this is the recently released white
  31. 1:14fellow ode, I mean, it's a gorgeous it's
  32. 1:17a gorgeous small grinder. very compact,
  33. 1:18angular. It fits perfectly in any nook
  34. 1:21and cranny in your kitchen. It's not
  35. 1:23overly bulky. It's It fits really well.
  36. 1:25The sound
  37. 1:27is not very loud. It's uh especially
  38. 1:29when you have the lid on. When you take
  39. 1:30it off, it gets a little louder,
  40. 1:31obviously. But so, overall, I think it
  41. 1:34looks really nice. I enjoy how big the
  42. 1:36front knob is. I I like the catch cup
  43. 1:39and how it's magnetic. I think that's a
  44. 1:41really great feature how you can just
  45. 1:43boom, just like that. It's really
  46. 1:44intuitive. There's only one button and
  47. 1:46you know how to change grind setting
  48. 1:48just by going to certain numbers. Now,
  49. 1:52uh there are a lot of cons though in my
  50. 1:54opinion with the grinder as far as how
  51. 1:56it's designed. So, first of all, I
  52. 1:58absolutely loathe the hopper lid. It
  53. 2:01just kind of like sits on there. It's
  54. 2:03It's not really They're just tiny little
  55. 2:05grooves. So, when you put it on, I mean,
  56. 2:07you can sit here and get on there.
  57. 2:14See what I'm saying? So, the hopper lid
  58. 2:17is not ideal to me. I I wish it was
  59. 2:19something a little bit more robust or
  60. 2:20something that clicked in a little bit
  61. 2:22more. It just feels kind of I don't
  62. 2:23know, like a kind of an afterthought,
  63. 2:25right? It's Yeah. Anyway, on the inside,
  64. 2:29uh the there's such a minimal angle of
  65. 2:32feed rate, uh which can be good in the
  66. 2:34sense that slows down the feed rate, but
  67. 2:37when you use RDT, which is necessary for
  68. 2:40this RDT, by the way, for those of you
  69. 2:42who aren't familiar with that term, it's
  70. 2:43Ross droplet technique. It's just the
  71. 2:45idea of putting a few drops of water or
  72. 2:47a spray of water into your whole bean
  73. 2:49coffee prior to grinding. This will
  74. 2:51lessen drastically your static and
  75. 2:54correlatively your retention. So,
  76. 2:56whenever you spray your beans or you put
  77. 2:58a little drop on it and shake it up,
  78. 3:01because it's such a minimal decline,
  79. 3:03it's such a minimal angle, beans can
  80. 3:05kind of get stuck and sit on the side
  81. 3:07due to the friction. So, you kind of
  82. 3:08have to babysit those beans and kind of
  83. 3:10push them down because the friction
  84. 3:12wants them to stick on the sides. So,
  85. 3:14that's not ideal. Um, you know, I want
  86. 3:16to be able to dump in my single dose,
  87. 3:18put the lid on to hush it up because I'm
  88. 3:20typically grinding when people are
  89. 3:22asleep. But with this, you kind of have
  90. 3:24to keep the lid off if you're using RDT
  91. 3:26to kind of push those beans down. So
  92. 3:27that's just that's not an ideal thing.
  93. 3:30Another issue, obviously, when we're
  94. 3:32looking at the Ode, and we're just
  95. 3:33switching up. We're going with the Black
  96. 3:34Ode now, are the steps. This this
  97. 3:37doesn't have fine increments whenever
  98. 3:39you're trying to dial in. You don't have
  99. 3:40like a macro and a micro adjustment. You
  100. 3:42have massive steps. So you can't go in
  101. 3:45between the two or it'll switch over as
  102. 3:48you're grinding, right? So that that
  103. 3:50that's kind of problematic that you
  104. 3:52don't you have these massive differences
  105. 3:54between one and the second notch and the
  106. 3:56third notch and the fourth notch etc. So
  107. 3:58you don't have seamless stepless
  108. 4:00grinding which isn't the biggest issue
  109. 4:02in the world for filter coffee but you
  110. 4:04know it it it's something that I wish
  111. 4:06were not there and we'll go over that
  112. 4:08more later. Um, and then finally, uh,
  113. 4:12one of my big issues with the grinder
  114. 4:14itself is the fact that there's no real
  115. 4:16way to add a add bellows or anything
  116. 4:19like that. So, a lot of grinders you
  117. 4:20have a circular entry point. You can put
  118. 4:23some sort of bellows and something like
  119. 4:25that where you can, you know, kind of
  120. 4:26pop it to get all of the retention
  121. 4:28that's in the burrs out into the final
  122. 4:30catch cup. But with this, because it's
  123. 4:32such a wide long hopper, it's kind of
  124. 4:34difficult to just make bellows for it.
  125. 4:37Now, there is uh I'll I'll put in the
  126. 4:39link down below. My friend Brian Quan
  127. 4:41made a video with uh with a bellows that
  128. 4:44was created just for the fellow, but it
  129. 4:45was made somewhere um where shipping is
  130. 4:48difficult from. So, I haven't been able
  131. 4:50to get one, but you can check that out
  132. 4:52if you're interested. Anyway, that is
  133. 4:54kind of like my ideas or my thoughts on
  134. 4:56on the pros and cons of at least how
  135. 4:58it's set up. Now, there are there are a
  136. 5:02lot of things though that I absolutely
  137. 5:03love about this. And in fact, whenever
  138. 5:05you get SSP burrs or another pair of
  139. 5:08burrs I'm going to show you here in a
  140. 5:09bit, Gorilla Gear burrs, whenever you
  141. 5:11put these burrs into this 64 mm grinder,
  142. 5:14I do believe, and I will I will continue
  143. 5:16to pontificate on this, I do believe
  144. 5:18that this is the best filter grinder
  145. 5:21before you hit diminishing returns. Now,
  146. 5:24what do I mean by that? I mean, yes,
  147. 5:26there are better grinders, but the
  148. 5:28difference between this grinder and a
  149. 5:30$2,000 grinder, I believe, is so minimal
  150. 5:32that the the difference in price, you're
  151. 5:35losing money. Essentially, there's a lot
  152. 5:37of diminishing returns going on there.
  153. 5:39So, uh, let's go ahead and check this
  154. 5:41out. So, taking apart this grinder,
  155. 5:43super easy. You just pull the face plate
  156. 5:45off, and then all you got to do is if
  157. 5:48you want to take the knob off itself,
  158. 5:49you take out these shallow screws, and
  159. 5:51that helps you calibrate your grinder.
  160. 5:54Okay. And then to take off the full
  161. 5:56face, you go to the deep set screws, and
  162. 5:58that's going to take off the face and
  163. 5:59allow you access to the burrs. Now, if
  164. 6:02you remember, one of my cons on this
  165. 6:03machine was that it was stepped. Okay?
  166. 6:06Well, there is a way to make it stepless
  167. 6:09like this. Okay? And I'm going to show
  168. 6:11you that just really quickly. So, all
  169. 6:14you got to do to make it stepless is
  170. 6:16we're going to pull this face plate off
  171. 6:18and we are going to just take out one
  172. 6:20piece. Now, some people when they have
  173. 6:22done this mod have found that their knob
  174. 6:26tends to drift when grinding, and that
  175. 6:28is very that's very normal for grinders
  176. 6:32to do. So, all you need to do if this is
  177. 6:34happening to you is take some Teflon
  178. 6:36tape and cover up the threads. All
  179. 6:38right, so here we go.
  180. 6:42Come on out. Come on out. All right, so
  181. 6:45now we have this out. We've got the This
  182. 6:48is where we can zero the machine. So you
  183. 6:50can come down and calibrate. You just
  184. 6:52turn until you hear the chirps.
  185. 6:55So I'm at chirps. So what I would do is
  186. 6:56turn this off, set that as one or go a
  187. 6:59little bit past chirp. Up to you. But
  188. 7:01what we're going to do here to make it
  189. 7:02stepless is you take this screw out of
  190. 7:04the middle.
  191. 7:07Very simply take the screw out.
  192. 7:13All right. Screws out. We have this disc
  193. 7:15like a washer. Whoops. And there goes
  194. 7:17that lid. my con, my enemy.
  195. 7:21We're just gonna slide this off. Okay.
  196. 7:24Now, right here, there's usually a
  197. 7:26little a little uh knob and behind it a
  198. 7:29spring. You just pull those two things
  199. 7:31out, replace everything, and you are
  200. 7:33good to go. Now, for this, well,
  201. 7:37normally this comes out. So, we're going
  202. 7:38to pull this out. Now, normally what
  203. 7:40you'll do if you want to make it
  204. 7:42stepless
  205. 7:43and you're having drifting issues,
  206. 7:45you're going to pull this out. Okay,
  207. 7:48this is what this is the little piece
  208. 7:49that pushes the back burr or the rotary
  209. 7:51burr into the stationary burr. This is
  210. 7:53the piece with that little gasket right
  211. 7:55there. All right, so this is pushes into
  212. 7:58that rotary piece to get those burrs
  213. 8:00closer and closer together. So when
  214. 8:02we're twisting, this is what's being
  215. 8:03twisted to go further and further into
  216. 8:05the grinder. All right, so this is what
  217. 8:08needs to hold its uh uh its position.
  218. 8:11And the way that we can make it hold its
  219. 8:12position to stop it from drifting is by
  220. 8:14taking some Teflon tape, some of that
  221. 8:16plumber tape, wrap it around these
  222. 8:17threads so that there's more resistance.
  223. 8:19Once you have that, you're not going to
  224. 8:21have any issues with drifting. Okay?
  225. 8:22Just a tight piece of Teflon tape right
  226. 8:24there. Then you're going to just screw
  227. 8:25it back in and you're going to be good
  228. 8:27to go. Now, I'm going to clap and
  229. 8:29everything's going to be reassembled.
  230. 8:31And all right, so we got that all put
  231. 8:34back together. Got it zeroed out. And I
  232. 8:36took off the main face plate. So that
  233. 8:38now we can take a look at what's going
  234. 8:40on inside. So I'm going to click that
  235. 8:42out. Oop. That little that little guy
  236. 8:43was a little uh anticipatory of that
  237. 8:45jump. Anyway, we're going to pull these
  238. 8:47out. And this is what the inside looks
  239. 8:49like. Now, these are not the standard
  240. 8:50burrs. I'll show you the standard burrs
  241. 8:51just in a second. But here's what the
  242. 8:53inside looks like. All right. So right
  243. 8:56here we have the spinning augur. So if I
  244. 8:57turn this on, this is dangerous. Do not
  245. 8:59try this at home. But I'm going to turn
  246. 9:00it on. You see the augur is spinning
  247. 9:02right there. All right, turn that off.
  248. 9:05So, what happens is this connects to
  249. 9:07this rotary burr. This little guy that
  250. 9:10was anticipatory and jumped on out.
  251. 9:11That's what that's what kind of keeps
  252. 9:13this spinning in line with this. This
  253. 9:15this little guy goes inside of the
  254. 9:17grooves here, which connects to the
  255. 9:18grooves there. Bada bing, bada boom. We
  256. 9:21have a rotary burr. Then we have the
  257. 9:22stationary bur on the back. Now, let's
  258. 9:26go ahead. I'm going to talk about one of
  259. 9:27my favorite things about this grinder,
  260. 9:29which is magic. It's voodoo magic and I
  261. 9:31love it. What kind of voodoo do you do?
  262. 9:33Uh Allen Stone. Um so what we're going
  263. 9:36to do is we're gonna look first at uh
  264. 9:39how the motor works and then we're going
  265. 9:40to look at bersets. So what I think is
  266. 9:43probably the most underrated, unders
  267. 9:45discussed, underappreciated aspect of
  268. 9:48the fellow ode is how the motor works.
  269. 9:51So, the motor is capable of maintaining
  270. 9:551,400 RPM output regardless of the
  271. 9:58amount of coffee you put in, regardless
  272. 9:59of the density of the beans you put in,
  273. 10:01regardless of whatever. All right, so
  274. 10:03the motor is only 140 watts, which means
  275. 10:05you can't really do espresso on it. You
  276. 10:07can occasionally. I don't recommend
  277. 10:09doing it off and it will degrade the
  278. 10:10motor quickly, but it is fantastic for
  279. 10:13filter. Anyway, 14040 watts, but it
  280. 10:16outputs a lot more RPM than what you
  281. 10:19would imagine. And what happens is
  282. 10:21because of some voodoo magic that they
  283. 10:22do it is it responds to the beans in the
  284. 10:26chamber and is able to maintain 1400
  285. 10:28RPM. Now how that happens is
  286. 10:31proprietary. I can't I can't say I don't
  287. 10:33know. Who knows how it works. It's it's
  288. 10:35crazy. It's it's it's a fugazi. It's
  289. 10:37fugazi. It's fairy dashed. Um but
  290. 10:40whatever it is, all I know is it gives
  291. 10:43you incredibly consistent particle
  292. 10:45distributions. And that is because
  293. 10:47constant consistent RPM is incredibly
  294. 10:49important to give you a really tight
  295. 10:51distribution. So if you put beans in and
  296. 10:54typically, let's say a motor has 2,000
  297. 10:56RPM output, whenever you put beans in,
  298. 10:59it can go down if the load is heavy down
  299. 11:00to like 1500 RPM and then ramp back up
  300. 11:03as the load is light for the for the
  301. 11:05coffee that's going through the burrs.
  302. 11:06This one, however, comes out starting
  303. 11:09starting fast and then it will reel down
  304. 11:11to 1400. You can actually hear it when I
  305. 11:13turn the motor on. If you're quiet, you
  306. 11:14can hear it. You ready?
  307. 11:18We're going to do that again. Even
  308. 11:19closer. Ready?
  309. 11:24So, what you hear is the motor going.
  310. 11:28So, what it's doing is it kicks up and
  311. 11:30it's going at a really quick RPM when
  312. 11:31you turn it on. Then it slows down
  313. 11:33drastically to find that 1400 RPM. that
  314. 11:36I think is the most underrated,
  315. 11:37underappreciated aspect of the Fellow
  316. 11:38and why I think it is the best filter
  317. 11:41grinder before you hit diminishing
  318. 11:42returns, which is incredible at the
  319. 11:44price point. Anyway,
  320. 11:46one of the big uh one of the big uh
  321. 11:48fallouts with the ODS release was a lot
  322. 11:50of people did not like the stock burrs.
  323. 11:52These right here are what come with that
  324. 11:54fellow O, the V1 version one burrs. Now,
  325. 11:57why did people not like these? Well,
  326. 12:00it's it's pretty simple. These burrs
  327. 12:02have these like ghost style edge teeth
  328. 12:04which just means that they are not
  329. 12:06flush. So the finishing teeth here are
  330. 12:08very very big. So that means as it's
  331. 12:10spinning large grounds can escape even
  332. 12:12if they're at touch. All right. So what
  333. 12:14does that mean? What's the what what
  334. 12:16does that entail? What that means is you
  335. 12:17cannot really do single cup single cups
  336. 12:20of coffee without severely under
  337. 12:21extracting your cup. Because of the
  338. 12:24geometry, these produce very few fines,
  339. 12:26which is fantastic. But also because of
  340. 12:29the geometry, you're not able to go very
  341. 12:31fine at all. So if you don't have many
  342. 12:33fines and you're grinding really
  343. 12:34coarsely, you can't hold the water back
  344. 12:36long enough for single brews, single cup
  345. 12:38brews to hold the water back for a
  346. 12:40proper full extraction. So you're
  347. 12:42getting a lot of weak under extracted
  348. 12:43cups that are not pleasant. So a lot of
  349. 12:45people have been really dishing on V1
  350. 12:47burrs. I would push back on that and say
  351. 12:49these are fantastic if and only if I iff
  352. 12:52and only if you're doing batches of like
  353. 12:563540 grams and above. So if you're doing
  354. 12:58batch brew at home, these are actually
  355. 12:59fantastic burs in my opinion because
  356. 13:01they're producing so few fines and you
  357. 13:03need that course that that coarse of a
  358. 13:05grounds uh anyway for a larger batch.
  359. 13:08But of course right now they're working
  360. 13:10on V2. until those come out. What I
  361. 13:13think is incredible for this grinder is
  362. 13:16what a ton of people have been using,
  363. 13:18the SSP burs. Now, these are absolutely
  364. 13:21fantastic. I've been using these uh
  365. 13:24constantly since I got them in uh like a
  366. 13:26month or two ago or so, and they produce
  367. 13:30some of the best filter coffee that I've
  368. 13:31had. And I think that is a combination
  369. 13:33of these SSP burrs, which give really
  370. 13:35high clarity and really high sweetness.
  371. 13:38And it's just it's a fantastic brew. But
  372. 13:40on top of that, I think the consistency
  373. 13:42and the RPM is also really helping with
  374. 13:44that. So, uh, these burrs are fantastic.
  375. 13:47Now, just a couple of days ago from
  376. 13:49filming this, I received a new set of
  377. 13:5264mm burrs that by the time this video
  378. 13:54is posted, they are available available
  379. 13:57for pre-order. I'll put the link below.
  380. 13:59I have been incredibly impressed with
  381. 14:00these the last few days I've been
  382. 14:01testing them. These are the Gorilla Gear
  383. 14:04burrs that are crafted by John Gordon.
  384. 14:06Okay. Um, these are uh coated in black
  385. 14:09diamond coat whereas these are red speed
  386. 14:11coating and so it's going to give you a
  387. 14:13lot longer life on them. Uh, and the
  388. 14:15cuts on them are are quite different.
  389. 14:17So, if you look closely here,
  390. 14:20very different grooves, very different
  391. 14:22cuts. Now, they can both grind for
  392. 14:23espresso, but they're doing very
  393. 14:26different styles. The way I like to
  394. 14:28match these up when I'm talking
  395. 14:30comparisons is the SSPs are going to
  396. 14:33give you a much more clean brew. It will
  397. 14:36have a little less sweetness in
  398. 14:38comparison to the Gorilla Gears. It will
  399. 14:40have a little less body in comparison to
  400. 14:42the Gorilla Gear burrs. The Gorilla Gear
  401. 14:44on the other hand is going to have a
  402. 14:46much bigger sweetness. It's going to be
  403. 14:47very very juicy and a very silky silky
  404. 14:50body. Very tasty. So, the way that I'm
  405. 14:52kind of uh my parallel, my analogy would
  406. 14:54be kind of like the common Dante hand
  407. 14:56grinder versus the Ku. common Dante kind
  408. 14:58of emphasizes clarity and and and those
  409. 15:01kind of aspects whereas the Kenu
  410. 15:02emphasizes that sweetness and body as
  411. 15:04you know Matt Winton the world brewers
  412. 15:07cup champion this year discusses in his
  413. 15:09decision-making process to choose the
  414. 15:10Kenu anyway um so both of these bur sets
  415. 15:14I think are incredible depending on what
  416. 15:16your uh pallet preferences are uh I I
  417. 15:19probably as of now I probably lean
  418. 15:21towards the SSP but that's only because
  419. 15:23I tend to really like teaike style
  420. 15:25coffees where the florals are really
  421. 15:27enhanc ed. Um, I don't really need much
  422. 15:29body, but for some coffees, having this
  423. 15:32with the intense silky body that it
  424. 15:34produces and the juiciness, it's quite
  425. 15:36it's quite nice. So, I'm really in love
  426. 15:38with both of these burrs. It's not a
  427. 15:40runaway contest between them. I think
  428. 15:41they're both incredible uh incredible
  429. 15:43burrs, incredible options for you at
  430. 15:45home. Um, I know that these are around
  431. 15:47$180. I'm not quite positive, but I'll
  432. 15:50have a link below and you can check it
  433. 15:52out what the price on the Gorilla gear
  434. 15:53will be. But what I can tell you is
  435. 15:55either one of these burr sets is going
  436. 15:56to create this is going to turn this
  437. 15:58fellow ode into the best grinder you can
  438. 16:01get for filter before you hit
  439. 16:03diminishing returns. Okay? And that is a
  440. 16:05lance guarantee. So just to kind of go
  441. 16:09over everything uh real quick. There are
  442. 16:12obviously the flaws. You have the lid.
  443. 16:14You have a lot of static. You have the
  444. 16:16stepped uh the stepped knob which you
  445. 16:18can turn stepless. Uh really the biggest
  446. 16:20flaw that you can't really change unless
  447. 16:21you 3D print something is the lid. It's
  448. 16:23kind of frustrating. But for the static,
  449. 16:25you can always RDT for this. You can
  450. 16:26make it stepless. All right. So, I've
  451. 16:28reconstructed this. And there was there
  452. 16:30is one other thing I wanted to discuss.
  453. 16:32There's been a reported issue that
  454. 16:33people have been having putting their
  455. 16:35SSP burrs in where it gets it's too
  456. 16:37tight on that stationary uh uh back um
  457. 16:41chamber. So, or that back carrier. So,
  458. 16:44what I wanted to say about that is it is
  459. 16:47also very very very very very tight on
  460. 16:48mine and I get it stuck frequently. But
  461. 16:52it's just because how tight some of the
  462. 16:53tolerances are on these grinders. So,
  463. 16:55just be very careful when you're doing
  464. 16:57SSP the SSP burrs to put it put it in as
  465. 17:00evenly as possible. If you are off at
  466. 17:02all, it can get jammed or stuck. Okay?
  467. 17:05It has to go in as evenly as possible.
  468. 17:07Make sure you clean out all the grounds.
  469. 17:09put it all the way down where the holes
  470. 17:10are aligned and kind of pop it in. All
  471. 17:12right, so it's going to be a very tight
  472. 17:15tolerance. All right, very tight. But it
  473. 17:19has gotten stuck on me multiple times.
  474. 17:20I've always been able to get it free.
  475. 17:22The easiest the easiest thing I found is
  476. 17:24if you're trying to pull the burr out,
  477. 17:26just take a screwdriver and put it in
  478. 17:27one of the holes, kind of just push it
  479. 17:29and once you can get that thing
  480. 17:30spinning, you'll be able to pop it back
  481. 17:32out. Okay, sometimes it kind of does get
  482. 17:34stuck because how tight the tolerance is
  483. 17:35on that inside carrier. So, keep that in
  484. 17:38mind if you do this. Don't freak out.
  485. 17:40Don't stress if you get in the burrs and
  486. 17:42it's not uh fitting. But, as always,
  487. 17:44everything you do is is at your own
  488. 17:45risk. I'm just telling you in my
  489. 17:47experience with SSPs in these, I have
  490. 17:49been able to get them in and out, even
  491. 17:51if it's a really, really, really tight
  492. 17:53fit. Okay. Okay. So, that is kind of
  493. 17:57everything. That's kind of the video. I
  494. 17:59just uh I really love this grinder. I
  495. 18:01think if you are someone that drinks
  496. 18:02pretty much only filter at home, I think
  497. 18:04it's definitely worth the investment of
  498. 18:05buying one of these. I think they're
  499. 18:07like $299 US dollars, something like
  500. 18:09that. And then upgrading the burrs to
  501. 18:11either maybe the Gorilla Gear if that
  502. 18:12flavor profile sounds really nice to you
  503. 18:14or to the SSP if you prefer that type of
  504. 18:17flavor profile. Either way, I genuinely
  505. 18:19believe this will give you the best bang
  506. 18:21for your buck, period. And it is the
  507. 18:24best filter grinder. Again, I can't say
  508. 18:26this enough before you hit diminishing
  509. 18:27returns, which is shocking at the price
  510. 18:29point. With SSP bars included, it's
  511. 18:31under like $500.
  512. 18:33That's incredibly cheap in comparison to
  513. 18:36uh competitors that are, you know, 1,500
  514. 18:382,000 and above. So,
  515. 18:41unless you're incredibly wealthy, I
  516. 18:44don't think there's any reason to go
  517. 18:45higher than this when doing filter
  518. 18:47coffee brewing. Anyway, thank you so
  519. 18:51much for watching this video. I'm just
  520. 18:52playing with a screwdriver now. I don't
  521. 18:54know why I'm doing it, but if you have
  522. 18:55any questions on the Fellow Ode, please
  523. 18:57ask below. Uh or if you have any
  524. 18:58questions on how I've done uh this mod
  525. 19:00or anything like that, you know, just
  526. 19:02let me know. I'd love to chat with you
  527. 19:03in the comments below. You know, again,
  528. 19:04hit that like, the subscribe, all that
  529. 19:06stuff. Share with your friends, whatever
  530. 19:07you might want to do. Really appreciate
  531. 19:09it. Check out the Patreon in the caption
  532. 19:10below. Anyway, I appreciate you all.
  533. 19:13Thank you so much. And I hope you brew
  534. 19:15something tasty today. Cheers.

About this transcript

This page contains the full transcript of BEST FILTER COFFEE GRINDER?: Is the Fellow Ode Hype or Reality? by Lance Hedrick, generated from the public captions YouTube serves with the video. The transcript has 3,880 words across 534 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.

What you can do with it

Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.

Free YouTube transcript tool

YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.