BAMBU LAB 3RD PRINTER P1S — Transcript

Full transcript

1. 0:03Good day class. My name is Joshua.
2. 0:07Ang tatalakahin natin yan is ang safe ng
3. 0:103D printer P1s.
4. 0:12Ang una nating kailangang gawin ay
5. 0:15kailangan stable yung pagpi-print natin
6. 0:18para hindi masira yung ating object.
7. 0:22Pangalawa, kailangan malayo sa tubig
8. 0:25yung ano yung ating 3D brinder kasi
9. 0:29pwedeng madulot na masira
10. 0:31magka-electrical silit ganon. Then
11. 0:34pagkatapos nating mag-print sa sa
12. 0:383D printer is kailangan huwag muna natin
13. 0:41patanggalin agad yung big plate dito
14. 0:44siya oh.
15. 0:46Itong build plate ko kasi sobrang init
16. 0:48pa nito at saka huwag nating hawakan
17. 0:51yung ano nazle dito kasi sobrang init
18. 0:54ngzle na yan
19. 0:57pwede kang mapasok tsaka
20. 1:01dapat may alam ka rin kung paano ito ano
21. 1:04gamitin
22. 1:07yun lang
23. 1:10good day everyone. My name is Joshua
24. 1:12Waldi Guzman. I am the operator of
25. 1:15Babolab P1s with automatic material
26. 1:18system.
27. 1:21In this video we will going to introduce
28. 1:23the 3D printer we use to fabricate our
29. 1:26product soft mode the bumble P1s
30. 1:32as well as parts components function and
31. 1:36the operation
32. 1:38these are the main parts of 3D printer
33. 1:41bambulab p1s AMS stands for automatic
34. 1:45material system
35. 1:47that allows for multicolor
36. 1:50and materials printing by automatic
37. 1:52switching between different filaments
38. 1:55during a print monitor. This is where
39. 1:58the printer status control speed
40. 2:01temperature are displayed. It allows
41. 2:03manual adjustment
42. 2:05how to load the filament in AMS. Open
43. 2:09the cover.
44. 2:12Load the filament.
45. 2:15Push the pin lock to upward.
46. 2:18Insert the tip of the filament
47. 2:23to the and automatically feeds.
48. 2:31Repeat the step with the remaining
49. 2:33filaments.
50. 3:13Good day. I'm Lawrence Chavez and I'm
51. 3:15here to demonstrate you how to bind the
52. 3:17Bamboo Laab P1s to Bambu Studio and
53. 3:20Bamboo Handy.
54. 3:23Bamboo handy. Natatanong natin paano
55. 3:25ma-download ang Bamboo Handy through our
56. 3:27mobile devices. So kung naka-ios ka
57. 3:30tulad nito,
58. 3:32punta ka sa App Store, i-search na lang
59. 3:35natin, Bambo Handy.
60. 3:38Lalabas na siya diyan.
61. 3:41Then pwede mo na siyang ma-download.
62. 3:44Then after you download it,
63. 3:48open mo siya.
64. 3:53Then you can easily bind
65. 3:55your bumbo handy to the printer. So
66. 3:58natatanong din natin sa iOS lang ba
67. 4:01pwedeng gumamit ng Bamboo handy? No.
68. 4:04Pwede din natin itong gamitin sa mga
69. 4:06Android devices. Just punta lang tayo sa
70. 4:08Play Store and downloadable naman nito.
71. 4:11So ah dito pag natapos na natin
72. 4:13i-download yung Bambo Handy natin, make
73. 4:16sure na yung ginawa nating account
74. 4:20is connected siya same sa Bamboo Handy
75. 4:22and the Bambo Studio.
76. 4:27Then add ko lang. Ah important factors
77. 4:30din nito na iyung ating
78. 4:33internet connection is iisa sila.
79. 4:38from Bambo Handy and Bambo Studio.
80. 4:41As you notice, ah meron tayong ginagamit
81. 4:43na dalawang application which is the
82. 4:46Bamboo Handy and the Bamboo Studio.
83. 4:49Ano nga ba iyung Bambu Studio? First
84. 4:51para magkaroon tayo ng Bambu Studio, you
85. 4:54need to open browser and search the
86. 4:57Bamboo
87. 4:59Bambu Laab Software.
88. 5:08Search natin. Then makikita natin dito
89. 5:10Bumble of Software. Then
90. 5:13it depends kung ano yung gagamitin
91. 5:15natin. Naka-Mac tayo o naka
92. 5:19Windows. So as nakaw ah nakaws tayo. So
93. 5:24click niyo lang 'yan and then
94. 5:25mada-download niyo na.
95. 5:27Then after niyo ma-download
96. 5:31ito na siya. This is the Bamboo Studio.
97. 5:35Ang Bamboo Studio ah dito tayo
98. 5:37makakapag-slice at makaka-import ng mga
99. 5:40STL objects like yung design natin from
100. 5:43CAD. dito natin mai-import and dito din
101. 5:46tayo pwedeng mag-dislice
102. 5:48to bind your 3D printer to your bambo
103. 5:51handy app. So una pindutin natin yung
104. 5:54bind printer
105. 5:56then scan natin. So makikita natin sa
106. 6:00screen ng 3D printer natin, hanapin
107. 6:03natin dito 'yung account. So account
108. 6:07nakikita natin not login. Pindutin natin
109. 6:09siya. Then may lalabas na QR code. Then
110. 6:13sa bambo handy i-scan natin siya.
111. 6:27Then wait lang natin for binding
112. 6:29connection.
113. 6:32Then after natin ma-bind lalabas dito
114. 6:35select your wifi. So dapat yung wifi
115. 6:37natin is parehas sila from select natin.
116. 6:54Then after natin ma-bind and ma-connect
117. 6:57sa same network. So lalabas dito
118. 7:00successful. So yung Bambo handy natin is
119. 7:03connected na siya sa ating Bambo P1s.
120. 7:14Tutorial on manual bed calibration. Una,
121. 7:16punta tayo sa settings. Then sa
122. 7:19settings, makikita natin dito
123. 7:21calibration. So sabi dito, it may takes
124. 7:25about 26 minutes.
125. 7:28So sa calibration this is a bed leveling
126. 7:32procedure should be done only if you
127. 7:34notice an inaccuracy in the bed
128. 7:36leveling. So before tayo mag-proceed sa
129. 7:39bed leveling procedure, it is important
130. 7:42to prepare the printer.
131. 7:44Ensure that the nozzle is clean and free
132. 7:47from any filament on the tip. If needed,
133. 7:50hit the nozzle and wipe the nozzle. to
134. 7:52ensure it's clean. Check the bed
135. 7:54leveling knobs and ensure they are
136. 7:56correctly tightened. So kapag okay on
137. 7:59lahat, proceed tayo sa bed calibration.
138. 8:03Pindutin natin yung yes.
139. 8:05Then makikita natin dito auto
140. 8:09calibrating. So successful siya.
141. 8:46Then after matapos yung bed calibration,
142. 8:50so makikita natin sa screen calibration
143. 8:52completed. So press okay lang natin. And
144. 8:57okay na. It's already done. Mix
145. 9:00calibration. So dito ia-calibrate natin
146. 9:03yyung filament. Uh, when do you need
147. 9:05flow dynamics calibration? Bakit natin
148. 9:07siya ia-calibrate? So una, uh kapag
149. 9:10naglagay tayo ng bagong filament dito sa
150. 9:13ating AMS, then the second is ah kapag
151. 9:17'yung nozzle natin, pinalitan na natin
152. 9:19ng bago ah 'yung nozzel natin na
153. 9:21ginagamit dito is 0.04.
154. 9:24So ayun, after we finish the flow
155. 9:26dynamics calibration, napapansin niyo
156. 9:28dito 100% na. I-nex lang natin siya.
157. 9:32Next. Then dito factor of k dito
158. 9:36sinasabi fin
159. 9:38uniform thickness.
160. 9:43Dito makikita natin sa 3D printer natin
161. 9:48yung na-print na flow dynamics
162. 9:50calibration. Tanggalin natin siya sa
163. 9:52bed.
164. 9:58Then dito napapansin niyo ah may value
165. 10:01siya 0.01.02.
166. 10:04Pipiliin natin diyan yung
167. 10:06pinakamagandang layer line. So kung
168. 10:09napapansin niyo alin ba yung
169. 10:10pinakamaganda?
170. 10:120.02.
171. 10:16So nakita na natin kung ano yung
172. 10:17pinakamagandang layer lines which is
173. 10:190.02. So i-input natin siya dito sa
174. 10:22factor k. 0.02
175. 10:26then finish
176. 10:30flow dynamics calibration results has
177. 10:32been saved to the printer. Just okay and
178. 10:35then yun calibrated na yung ating flow
179. 10:38dynamics calibration. Dito sa flow rate
180. 10:42calibration ah kina-calibrate natin yung
181. 10:45ating surface quality. Ah kung yung
182. 10:49napapansin natin sa paulit-ulit na print
183. 10:52'yung surface quality natin is rough na
184. 10:55or uneven na for surface. So 'yun. So
185. 10:58dito sa fullid calibration paano siya?
186. 11:02Ah una pindutin lang natin 'yung manual
187. 11:04calibration sa ibaba. Then next ito.
188. 11:08Calibration type complete calibration.
189. 11:11Pag complete calibration yun yung
190. 11:14mismong settings natin dun. sa ano
191. 11:18slicing then sa fine calibration naman
192. 11:20based on tayo dun sa flow ratio. K ah
193. 11:23kung doun sa slice settings natin
194. 11:25in-adjust natin yung flow ratio then
195. 11:27dito pwede din natin ma-adjust to. Then
196. 11:30dito sa nozle diameter katulad lang sa
197. 11:33flow dynamics mamimili lang tayo kung
198. 11:36ano yung ginagamit natin na nozle
199. 11:38diameter. Then sa plate ganun din.
200. 11:41textured ba or smooth? So 'yung gamit
201. 11:44natin dito is textured plate. Then the
202. 11:47filament for calibration. So ayun
203. 11:49mamimili din tayo kung anong filament
204. 11:52'yung ating gagamitin. So select natin
205. 11:54si A1
206. 11:56then calibrate.
207. 12:03Sending print job through the cloud
208. 12:04service. So sine-send na niya yung ating
209. 12:07print job to the 3D printer. So wait
210. 12:09lang natin.
211. 12:11So dito dito pinapakita kung ano yung ah
212. 12:15resulta nung ating flow rate. Ah dito
213. 12:18may 0 - 1 yan yung result na yan yung
214. 12:22magiging result kapag na-print na dito
215. 12:24sa 3D printer. Hintayin lang natin mag
216. 12:26100%.
217. 12:29After natin matapos yung flow rate
218. 12:31calibration,
219. 12:33next lang natin dito.
220. 12:36Then please find the object that is
221. 12:38simless and has the best smoothness.
222. 12:40Type in the number black below. So dito
223. 12:43malalaman natin kung alin dito yung sa
224. 12:46number dito kung alin yung
225. 12:47pinakamaganda. Makikita natin yan dito
226. 12:50sa ating finish printed
227. 12:54low frame.
228. 12:59Kung napapansin niyo yung 0 -1 -3 dito
229. 13:04mamimili tayo kung ano yung
230. 13:05pinakamaganda sa kanila. Sa tingin niyo
231. 13:08guys ano yung pinakamaganda sa kanila?
232. 13:13Okay, - 1. So dito ise-set natin siya to
233. 13:18- 1.
234. 13:23Then finish lang natin.
235. 13:27then okay
236. 13:36then sabi dito once na matapos natin
237. 13:39yung flow red calibration makita natin
238. 13:41dito
239. 13:42please find the object that is seamless
240. 13:45and has the best smoothess
241. 13:49dito feel lang natin kung ano yung
242. 13:51pinakamagandang surface malalaman natin
243. 13:53yan dito sa finish
244. 13:57blow calibrated
245. 13:59natin ano dito titingnan natin pipiliin
246. 14:02natin diyan kung ano ba yung
247. 14:03pinaka-smooth
248. 14:05so may 1 -1 -2 hanggang -7 so dito
249. 14:09napapansin niyo pinakamaganda is - 1
250. 14:12then sasalang natin siya dito
251. 14:15smooth stop surface - 1 then finish
252. 14:20flow rate calibration result has been
253. 14:22saved to set then press okay then okay
254. 14:26na it's
255. 14:29goods na tayo lahat in terms of flow
256. 14:31dynamics and flow rate calibration. How
257. 14:34to import STL file from the Bambo
258. 14:37Studio?
259. 14:39So una, ano nga ba yung STL? STL stands
260. 14:44for stereolytography
261. 14:46which means a 3D file format that
262. 14:50represent the surface geometry of a
263. 14:52threedimensional object using a
264. 14:55triangular meshes. The first step is to
265. 14:58open your drafting software. So dito ang
266. 15:01ginagamit namin is AutoCAD. Open lang
267. 15:04natin yung ating autocad.
268. 15:07After natin ma-open yung ating drafting
269. 15:09software, dito we simply create a three
270. 15:12diimensional object.
271. 15:28After we create a three diimensional
272. 15:30object, dito punta lang tayo sa home.
273. 15:34Then hanapin natin yung export. Then sa
274. 15:37export may makikita tayong other
275. 15:38formats.
276. 15:41Then dito sa other formats, kung
277. 15:43napapansin natin yung ating file type,
278. 15:46it automatically turn into a STM file.
279. 15:49Baguhin lang natin 'yung pangalan.
280. 16:05Then click save.
281. 16:08Then click lang natin yung ating object
282. 16:11then press enter.
283. 16:14Then it automatically save into STL
284. 16:17file. Create our three diimensional
285. 16:21object and save it into STL file. The
286. 16:24next step is to open our Bamboo Studio.
287. 16:29After we open the Bamboo Studio, punta
288. 16:32lang tayo dito sa prepare.
289. 16:35Then makikita natin dito sa top mouse
290. 16:38corner meron ditong mga tools. Pindutin
291. 16:41lang natin itong add or contl for add
292. 16:45project.
293. 16:47Then hanapin lang natin yung ating
294. 16:49na-save na STL file.
295. 16:59After we upload our STL file, kung
296. 17:03napapansin niyo yung ating object,
297. 17:06it's automatically lay on our build
298. 17:10plate.
299. 17:11Dito sa left side makikita natin dito
300. 17:15iyung mga print settings and slicing
301. 17:18parameters. You can adjust it quality,
302. 17:21strength, speed or if you need a support
303. 17:25in your
304. 17:26object.
305. 17:28Then after natin ma-adjust yung ating
306. 17:31print settings and our slicing
307. 17:34parameters, you can easily slice it or
308. 17:37slice your object.
309. 17:41Then after you slice, makikita natin
310. 17:43dito kung gaano karami yung ating
311. 17:45ma-consume na filament and then kung
312. 17:48gaano kabigat yung ating object. Also,
313. 17:51kung gaano katagal siya i-print, it
314. 17:53takes 15 minutes and 48 seconds.
315. 17:57Then after you see your slicing result,
316. 18:01just click print plate and the Gcodes
317. 18:03will automatically send it to the
318. 18:06Bumbleab P1s.
319. 18:09That's all on how to print multicolor.
320. 18:13So, first add project tayo. Add tayo ng
321. 18:16STL.
322. 18:19So dito example natin
323. 18:24yan nandito na siya agad. Then the next
324. 18:27one is kung nakikita niyo dito sa
325. 18:28project filaments maga-add tayo. Kung
326. 18:31ilan yung filament na nasa AMS natin
327. 18:34ganun din yung ia-add natin dito sa
328. 18:35project filament.
329. 18:38So sa ating AMS
330. 18:40meron tayong apat.
331. 18:43Add tayong apat. One,
332. 18:47two, 3, 4. So sa A1 dito natin makikita
333. 18:53kung ano 'yung nakasalpak don sa AMS1
334. 18:55natin. Then sa A2, sa A1 natin gumamit
335. 18:58tayo ng dito. Pili natin kung anong
336. 19:00brand na ginamit natin. Polylight PLA
337. 19:04then anong kulay niya? Kulay red. Tama.
338. 19:07Okay. Then sa A2 natin. Yung A2 natin is
339. 19:11ABS. Ah polymer din siya.
340. 19:14at ABS ang color niya is white.
341. 19:19Then sa A3
342. 19:22polylight din
343. 19:24ang kulay niya is mate beach.
344. 19:28Then sa A4 is ah itong A4 natin is
345. 19:31bamboo. Bamboo filament
346. 19:34PLA basic.
347. 19:36Kailangan natin malaman kung ano yung
348. 19:37ginamit natin na filamente.
349. 19:40Ano yung maker ng ating filament then
350. 19:43anong kulay.
351. 19:44Then pagkatapos natin ma-set na yung
352. 19:46ating mga project filaments,
353. 19:49just click the object.
354. 19:51Then punta tayo dito. May makikita tayo
355. 19:53ditong color painting.
356. 19:57Dito sa filaments makikita natin na apat
357. 19:59kasi apat yung ating fragic filaments
358. 20:01from the AMS. Meron tayong red, white,
359. 20:04eight bridge and green.
360. 20:08Dito sa color painting, meron tayong mga
361. 20:10tool types. Una, meron tayong circle.
362. 20:13Pwede nating ma-adjust yung circle size
363. 20:16niya. Ayan.
364. 20:18Kunyari kino-co yung circle ah pwede
365. 20:21nating kulayan yung ano,
366. 20:25yung top surface niya. Kung green yung
367. 20:27na-select natin, natin kulayan.
368. 20:31So ayun
369. 20:34natin. Then dito naman sa sphere itong
370. 20:37sphere ah parehas lang siya ng circle at
371. 20:39at pinagkaiba na siya ah yung circle
372. 20:42from top surface lang. But sa sphere
373. 20:45pwede siyang
374. 20:51so ito ah tool type ng sphere. Ah
375. 20:54ginagamit ito applicable 'to sa mga
376. 20:57concave objects. So para ma-fill siya
377. 21:00maffel
378. 21:02so. So so dito ah sphere kinds of tool
379. 21:06type
380. 21:08kadalasan ginagamit siya sa mga concave
381. 21:10objects para properly filled yung ating
382. 21:12pagco-color.
383. 21:15And ito naman triangle yung ating
384. 21:18pag-paint ng color. Ah kadalasang
385. 21:20ginagamit siya sa mga geometrical shapes
386. 21:24like edge yan mga edge nito sample dito
387. 21:28ito ganyan ganyan so yun
388. 21:34then the next one is the height range so
389. 21:37dito sa height range ah malalaman natin
390. 21:40kung gaano ba kataas yung rates nung
391. 21:42ating color na gagamitin example kinlick
392. 21:46ko siya dito then i-drag ko pataas
393. 21:49All green na sila.
394. 21:53Next is the field. Dito sa field, you
395. 21:56can easily select you want to color. For
396. 22:00example, yung top surface lang ng ating
397. 22:03mga letter, yung edge nila. Yan. Yan.
398. 22:08Yan. So dito ah naka-note dito.
399. 22:12So yung filament natin, yung A2 natin o
400. 22:15yung polylight ABS is
401. 22:18nakakaapekto 'to sa ating multifilament.
402. 22:21Bakit? Kasi ah
403. 22:24kapag nag-print tayo ng lahat, PL A and
404. 22:29isang ABS, nakakaapekto 'yung ABS sa
405. 22:33pabago-bago ng temperature because yung
406. 22:36ating ABS may sarili siyang temperature,
407. 22:39nzel temperature. It affects the Kencos
408. 22:42noer clugging
409. 22:47kaya
410. 22:49nasapak na yung
411. 22:52>> after you customize your color in your
412. 22:553D object. So dito ah natapos na natin.
413. 23:00So makikita natin dito ano ba on'tg box
414. 23:02na to. Ah this is the prime tower. Ah
415. 23:05ang purpose nito during a filament
416. 23:07change kumbaga pino-ports nito yung old
417. 23:10color to ensure a smooth color
418. 23:12transition. So hindi ito mawawala.
419. 23:15Then pagkatapos niyan na place na natin.
420. 23:18You can easily slice it.
421. 23:21Then pagkatas natin ma-slice,
422. 23:25proceed tayo sa print plate.
423. 23:31Then nakalagay yung filament nating
424. 23:33magagamit tatlo. A1, A3 and A4. And then
425. 23:38send it to the printer.
426. 23:43Then ganun lang yung process ulit.
427. 23:51Good day everyone. My name is Ericson
428. 23:53Mondido. So today-discuss
429. 23:55natin is about maintenance ng Bambulab
430. 23:583D printer P1s.
431. 24:01So dito ang first step natin is
432. 24:03tanggalin natin onong cover para malinis
433. 24:06natin.
434. 24:08So dito sa nozzle natin ito yung cage.
435. 24:13So dapat bago natin to galawin o
436. 24:15linisan, patayin muna natin iyung ano
437. 24:18niya, power button niya para maayos
438. 24:21natin na ma-maintenance. So nakabukas pa
439. 24:23siya, papatayin ko muna.
440. 24:27So dahil patay na siya, pwede na natin
441. 24:29siyang galawin kasi patay na yung makina
442. 24:32niya o kaya yung machine. So dahil patay
443. 24:35na siya, pwede na natin ong linisan
444. 24:38gamit ang
445. 24:40tissue at alcohol.
446. 24:52So dito lang papahid lang natin yan dito
447. 24:56para matanggal natin yung mga dust. Gaya
448. 24:58niyan may mga dust siya dito rin sa
449. 25:01ilalim
450. 25:03also dito.
451. 25:07Tapos okay dito sa kabila rin.
452. 25:21Once na satisfied na kayo sa linis.
453. 25:23Okay, proceed na tayo sa second step.
454. 25:28Ang next step natin is lilinisan natin
455. 25:31'tong
456. 25:33cor ano niya dito pinaka bottom niya
457. 25:35kasi sobrang daming may excess diyan. So
458. 25:37makikita niyo ang daming excess dahilan
459. 25:39din yan ng mga quality defect natin.
460. 25:44Kasi once na nag-on yung fan yung ibang
461. 25:46dustk umaakyat papuntang
462. 25:49object kaya nagk ano nagco-cause yun ng
463. 25:53bad print quality.
464. 25:58So ito dahil sinabi ko linisan natin,
465. 26:00kailangan natin ong linisan. Tanggalin
466. 26:02natin yung mga dust.
467. 26:07So ito okay na 'to.
468. 26:10Konting linis na lang.
469. 26:13So once na-satisfied ka na sa linis
470. 26:15niya, proceed na tayo sa pangatlo.
471. 26:19So next natin is itong bed plate. Ang
472. 26:23gagawin natin dito sa bed plate dahil
473. 26:27natatanggal naman siya para mas mabilis
474. 26:29siya malinis, tanggalin muna natin.
475. 26:32So ito siyang bed plate. So yung
476. 26:34nakikita niyo marami siyang dust, dum
477. 26:36siyang dumi. Kabilaan yan. So lilinisan
478. 26:39natin yan gamit din ang alcohol at ang
479. 26:43tissue.
480. 26:51Gradual lang gent lang para maiwasan
481. 26:55natin yung scratch.
482. 26:58Yan din sa kabila din
483. 27:01ginagawa natin to para
484. 27:05kada print natin is maganda yung kapit
485. 27:07ng filamin kahit wala ng glue.
486. 27:18So next tayo is balik naman natin onong
487. 27:21plate. Bago pala natin balik is make
488. 27:23sure natin na malinis din to.
489. 27:29So yun, balik na natin siya. Bago natin
490. 27:32siya balik, make sure natin na
491. 27:34naka-align siya kasi pag yan naka-align,
492. 27:37magco-cause siya ng wiggle. Kaya dapat
493. 27:40ayusin natin yung paglagay ng print ng
494. 27:42print plate bed plate. So makikita niyo
495. 27:46ito yung ano niya pantay na siya. So
496. 27:49okay na yan.
497. 27:52So next natin is i-maintenance natin
498. 27:55yung greas nitong pinagbababaan ng Z.
499. 27:59So paano mag-maintenance niyan?
500. 28:01Mine-maintain nilalagyan to ng gras
501. 28:04every 3 months. So ang printer na to
502. 28:06ginagamit pa lang namin siya. Hindi pa
503. 28:08siya umaabot ng 3 months. Nagagamit pa
504. 28:10lang namin siya mga 1 month pa lang kaya
505. 28:12namin siya lalagyan ngayon. So papakita
506. 28:14ko lang paano siya i-demonstrate. So
507. 28:17kumuha ka lang ng konting
508. 28:20nito ng greas na 'to. Papahid mo lang
509. 28:22siya dito kabilaan na siya.
510. 28:27Dito kabilaan. So dito rin kung makikita
511. 28:29niyo meron siya ditong tube dito. Ito
512. 28:33itong tube na ' lalagyan din yan ganun
513. 28:36din. Ganun din sa kabilang part dito
514. 28:38meron din. So yun lang.
515. 28:41So yun lang. Ang next natin is ang
516. 28:44nozzle. So paano natin siya lilinisan?
517. 28:47So dito ang nozzle itoung pinaka
518. 28:51pinaglalabasan niya ng filamin. So dito
519. 28:54ang dami niyang
520. 28:56daming excess na natira na natuyo. Kaya
521. 28:59tatanggalin natin yan.
522. 29:02Napasok na natin 'tong panglinis niya.
523. 29:04Though kasi ito ginagamit lang naman 'to
524. 29:06once na mga may scenaryo na nagbara
525. 29:10'yung ginamit na filamin. So gagamitan
526. 29:12mo lang 'yan
527. 29:14tang i
528. 29:17pu-push mo lang yan ng up and down. So
529. 29:20yan once na tapos na so okay na yung
530. 29:22nozzle natin.
531. 29:26So dito kung makikita niyo dito 'yung
532. 29:27function natin. Ito 'yung screen ng dito
533. 29:30nagka-function 'yung 3D printer. So dito
534. 29:33makuha, punta muna tayo sa settings.
535. 29:36Home pun natin tayo sa settings. So nasa
536. 29:39settings na tayo.
537. 29:41Punta lang dito tayo sa kabilang side.
538. 29:44Baba lang natin. So dito makikita natin
539. 29:47calibration.
540. 29:48So ang calibration kasi ginagawa lang
541. 29:50natin para mas maganda yung print
542. 29:53quality ng ating object. So calibrate
543. 29:57lang natin. So dito makikita niyo
544. 29:59calibration program may take about 26
545. 30:02minutes. Do you want to start
546. 30:04calibration now? So ka-calibrate natin
547. 30:06siya.
548. 30:10So wait lang natin siya matapos
549. 30:11mag-calibrate
550. 30:13para mag once na nag-print tayo is
551. 30:16maganda yung quality.
552. 30:20So dito naman tayo. Ito yung dapat
553. 30:24min-maintain natin yung hose kasi once
554. 30:28na once na may bali itong hose hindi
555. 30:32maayos yung flow ng
556. 30:36filament dito sa printer. Once na may
557. 30:38bale siya mahihirapan din siyang mag
558. 30:42pumasok dito sa printer. Kaya dapat make
559. 30:45sure natin na wala ong bali lagi at
560. 30:47maayos yung daloy ng filament dito sa
561. 30:50hose.