Advanced Mixing Tips for House Producers – Fixing Groove, Transients & Clarity — Transcript
Full transcript
- 0:00When it comes to mixing, there are
- 0:01thousands of fancy tools and approaches
- 0:03that you can use to make your music
- 0:04sound better. But mixing is also about
- 0:06knowing when to use those fancy tools
- 0:08and approaches and when to keep it
- 0:09simple. In order to make the right
- 0:11mixing decision in the right situation,
- 0:13you have to be familiar with certain
- 0:15concepts and examples. So, let's look at
- 0:17a few of those. In this video,
- 0:19[Music]
- 0:28we're going to jump into an old project
- 0:29of mine, which I never ended up
- 0:30completely mixing. So, there's going to
- 0:32be lots of stuff that we can do and take
- 0:34a look at. Just to get you up to speed,
- 0:36we have this bass sound right here,
- 0:41a kick,
- 0:45road sound,
- 0:48guitar,
- 0:55more drums, of course.
- 1:03Some vocals.
- 1:10In a case like this where I don't
- 1:12exactly know yet where the problem is,
- 1:15um I would start with the most important
- 1:16elements and kind of bring build the
- 1:18track from the bottom up and see what
- 1:20issues arise and stuff like that. So
- 1:23let's start with the kick.
- 1:30Okay, since the groove was kind of an
- 1:32issue here, we have some dirtiness back
- 1:34here. I don't know if it's coming
- 1:35through on YouTube, but there's this
- 1:38kind of slapback reverbby noise sound at
- 1:41the end of the kick.
- 1:46And it's even in stereo. So, if you have
- 1:47like a utility and you put it in mono,
- 1:50compare this in stereo.
- 1:52Now, mono.
- 1:59So that's already something in there.
- 2:01Sometimes it's really cool to have like
- 2:02some imperfections, but you have to pick
- 2:04the right imperfections, of course, and
- 2:06sometimes a little detail like this can
- 2:08already start to mess with the groove a
- 2:11bit, especially if you have many
- 2:12elements and things going on. All these
- 2:14little things add up in the end. So
- 2:16let's uh also play the bass and listen
- 2:19in context.
- 2:25Yeah, like it it bothers me a bit.
- 2:28So, there are different ways to get rid
- 2:30of something like this, but maybe we can
- 2:32get lucky and even make the kick
- 2:34shorter, which is part of mixing,
- 2:36obviously, compressing it, shaping the
- 2:38envelopes and stuff. And in this case,
- 2:41maybe a shorter kick is fine since we
- 2:43even have like relatively sustained
- 2:46notes in the bass, right? So, a shorter,
- 2:48a bit punchier kick might be fine.
- 2:55It's a bit better to me.
- 3:02Okay, that's cool. And mono is also
- 3:05fine. Maybe I just hit left instead of
- 3:07mono so it doesn't like collapse to the
- 3:10mono and you just use one side.
- 3:15Okay, sounds cool. But the topic we had
- 3:18in my last video with about the
- 3:19transients and clickiness and stuff is
- 3:21also kind of an issue here, right? So
- 3:23the kick by itself
- 3:27has a click in there. It's not
- 3:29obnoxious, but it's there for sure, but
- 3:31could be fine since it's more like a a
- 3:34fat kick and a click could be helpful.
- 3:36But the bass,
- 3:40there's some side chain compression on
- 3:41here, which we're going to get to in a
- 3:42second. Let's turn that off. So,
- 3:47super clicky. Like this hit right here
- 3:50has such a click. If you zoom in, you
- 3:53even see it has this little corner here,
- 3:55which definitely is going to lead to a
- 3:58click. And there's some different tools
- 4:00that you can use to shape the um
- 4:04dynamics and the transients and stuff
- 4:05like this. And thanks for all the people
- 4:06mentioning that the comments of my last
- 4:08video. I like this drum shaper which you
- 4:11can use and you can kind of take out the
- 4:14attack
- 4:19which could be a solution. But in this
- 4:22case, I wasn't really happy with the
- 4:23result. So, since I luckily have some
- 4:26tools um that I use for my other audio
- 4:29jobs, something that's almost a bit like
- 4:31cheating, but still useful. If I
- 4:33consolidate a clip or something like
- 4:35this, and double click, you can hit this
- 4:37edit button, which you can link to an
- 4:40editor. So, if I hit this, it's actually
- 4:42going to open up RX, and you have tools
- 4:45like a dclick in here. So, if you check
- 4:47out the transients and I hit dclick,
- 4:52you can see how they get slightly
- 4:53reduced, right? So, let's save that up.
- 4:56It's already going to be ready and live.
- 4:58And let's compare that real quick.
- 5:06So, you can really hear the click. And
- 5:12obviously for some people this might get
- 5:14go too far, but it's like those little
- 5:16things and outside the box tools that
- 5:19you can sometimes use to make stuff like
- 5:21that happen because in context it might
- 5:23the click might be a problem. Especially
- 5:26in a bass like this where the bass is
- 5:29playing at a rhythm where it's often
- 5:32playing where the open high will be
- 5:33landing for example and percussion
- 5:35sounds, right? So having a transient
- 5:37like this, this is going to layer up
- 5:39with other drums. Maybe get a bit phazy,
- 5:41they don't add up completely nice. So
- 5:43that's something always comes up to
- 5:45context, but it might end up messing
- 5:47with the groove. So speaking of how the
- 5:51bass is playing, we had the side chain
- 5:54compression on here, and the flow of the
- 5:55kick and bass wasn't that nice yet. And
- 5:57this is just like a normal volume shaper
- 6:00thrown on here. If you look carefully at
- 6:04like the
- 6:06where the kick is playing and where the
- 6:08bass is playing, the bass is usually
- 6:11falling in between the kick drums,
- 6:13right? So there's not that much of a
- 6:16need for side chain compression because
- 6:18the kick and the bass are rarely playing
- 6:20at the same time. They're just
- 6:22overlapping a little bit here and it's
- 6:25kind of playing this hit relatively soon
- 6:28after the kick. If we kind of do that,
- 6:31uh, use a visualizer for that and just
- 6:33play kick and bass.
- 6:40You can see it's kind of falling in
- 6:42between there. It's not that big of a
- 6:44deal. And this tail,
- 6:48let's say we turn off the drum shaper
- 6:50and loop this over here real quick, so
- 6:52we get the dclicked version.
- 7:04I feel like the tail of the the bass is
- 7:08it's a bit nicer if it's sustained and
- 7:10natural. It kind of adds to the to the
- 7:12rhythm and flow of the of the bass.
- 7:18Like here you have some pumping.
- 7:23And if you turn it off, you don't have
- 7:24that. Of course, you could use a side
- 7:26chain compressor that doesn't duck it
- 7:28completely and something like that. Uh,
- 7:30you could bring this a little bit up and
- 7:32make it a bit shorter. Of course, maybe
- 7:34that's a compromise if you really want
- 7:36to go for loudness and have that
- 7:37separation.
- 7:41Yeah, maybe that works.
- 7:43In the case of the kick, I felt like
- 7:46there could be a bit more mid-range and
- 7:48that also kind of connects with the
- 7:51trans transients we talked about because
- 7:53obviously another way to shape the
- 7:56transients of your sounds is distortion.
- 7:59So we have decapitator here and it's not
- 8:02even driving much. But if you listen to
- 8:04the kicking solo,
- 8:06so with the decapitator
- 8:10without
- 8:14something interesting to know about if
- 8:16we use visuals once again,
- 8:22check this out. We turn off the
- 8:24capitator.
- 8:26Check out this area here.
- 8:29That's where some of the mid-range punch
- 8:31is. That sounds a bit awkward in this
- 8:32context. So, if we turn that on,
- 8:36look how the transient was shaped a bit.
- 8:38Like it's moving, distorting the
- 8:40mid-range and reducing the peaks.
- 8:43Okay, let's listen to where we at right
- 8:45now. Everything together.
- 8:54Let's go to the mid-range elements.
- 8:56Right. So we have kick bass and then go
- 8:58for the roads and the guitar. So in the
- 9:02case of the roads, this is coming from
- 9:05Lounge Lizard. I was lacking some
- 9:07high-end in here, but instead of using a
- 9:10lot of EQ, we could add a bit of
- 9:13velocity.
- 9:17Now, we have to turn down the volume a
- 9:18little bit, but higher velocity in the
- 9:21case of a road sound will create more
- 9:24high frequencies. So instead of mixing
- 9:26around and trying to pull something up
- 9:28which isn't there,
- 9:31before
- 9:34after.
- 9:37Okay, let's jump to the guitar,
- 9:40which is a loop here.
- 9:48Okay, what I did here, which I turned
- 9:50off for now, is just some flanging
- 9:53because I felt like, okay, it needs some
- 9:55separation. They're really similar in a
- 9:57way. And adding some character and
- 9:58texture just with the flanger, for
- 10:00example,
- 10:02kind of spreads it out.
- 10:05[Music]
- 10:07That sounds kind of cool.
- 10:09[Music]
- 10:15Makes it almost like a bit electronic.
- 10:17uh electric sounding which I find cool
- 10:19in this context. So,
- 10:31>> lastly, down here
- 10:34we have some effect sounds. And can be
- 10:37nice to have a texture like this
- 10:40under your track.
- 10:45But in a way it becomes a drum because
- 10:47if we listen to the drums,
- 10:50check this out.
- 10:52So this little hit here
- 10:58comes straight after the clap. So it
- 11:01almost sounds like a little early
- 11:03reflection slap back after the clap. So
- 11:07[Music]
- 11:09check this out
- 11:11here.
- 11:14So, this is quite a bit too loud, right?
- 11:18And stuff like this can already mess
- 11:20with your roof. Like these little
- 11:22transients and pokes and stuff like
- 11:23that, our ear will kind of blend them
- 11:26into the mix and into the groove. And
- 11:28that can be very cool if it's well done,
- 11:30but if it's not that well done, it's a
- 11:32bit difficult. So, once again, we have
- 11:34we can have some saturation in here. And
- 11:37driving that saturation
- 11:40is taking out
- 11:42all these little clicks, right? So,
- 11:47you see it's kind of chopping them off.
- 11:50Let's bring that down a bit.
- 12:01Already helps. All right. So, we
- 12:03obviously have to take care of the
- 12:05drums, but it's going to take quite some
- 12:07mixing and fixing. and there's
- 12:08interesting things that we can talk
- 12:09about and that's going to be kind of
- 12:11enough content for one video of itself.
- 12:13So, I'm looking forward to see you in
- 12:15the next one where we're going to tackle
- 12:16those. Thanks for watching as always and
- 12:18feel free to check out my sample shop.
- 12:20You can find the link in the description
- 12:22if you're looking for some cool samples
- 12:23for house music production. But see you
- 12:25in the next one. Tow.
About this transcript
This page contains the full transcript of Advanced Mixing Tips for House Producers – Fixing Groove, Transients & Clarity by Olean's House, generated from the public captions YouTube serves with the video. The transcript has 1,739 words across 266 segments, with the original timestamps preserved so you can click any line to jump to that moment in the embedded player.
What you can do with it
Use the transcript to take notes, quote the speaker, build a study guide, generate a summary with ChatGPT or Claude via the YouTube Summary tool, or export it as a timed subtitle file with YouTube to SRT. You can also re-open it in the transcriber to choose a caption track available on the video.
Free YouTube transcript tool
YouTube2Text is a free YouTube transcript generator — no signup, no daily limit. Paste any YouTube link and get the full transcript instantly, with timestamps, click-to-jump, caption language selection, AI prompts for ChatGPT, Claude, and Gemini, and exports to TXT, SRT, VTT, or Markdown.