YouTube transcript (GP3KHF51sJs) — Transcript

Full transcript

1. 0:00In continuation of our last video, when
2. 0:02we showed you the types of charging
3. 0:04port, this is the normal Android
4. 0:06charging port. Now, I'm going to show
5. 0:07you how to remove this out this port.
6. 0:10Maybe now should in case you have a
7. 0:12customer is complaining I want to fix my
8. 0:13charging port problem and this
9. 0:15I will show you how to remove it and
10. 0:17replace a new one right now. Watch.
11. 0:20This is your Android board.
12. 0:22Before you do anything, take your paste.
13. 0:25You rub it on the surface
14. 0:27of it and on the legs
15. 0:30of it.
16. 0:34Good.
17. 0:35You use this
18. 0:36particular
19. 0:38plier to hold down to hold down the
20. 0:41the board.
21. 0:42Do you understand? Make sure it's heavy
22. 0:43enough to hold down the board.
23. 0:45Then you on
24. 0:46put it into air should be into the
25. 0:49heater should be in four. Then you on.
26. 1:01You heat it for a good 5 minutes. Just
27. 1:03this way through from under, please.
28. 1:06So that you can weaken the four legs, 1
29. 1:082 3 4.
30. 1:09Weaken the four legs before you can be
31. 1:11able to pull it out.
32. 1:12For good 5 minutes keep heating it for
33. 1:14good 5 minutes.
34. 1:165 minutes notice that
35. 1:18a bit of smoke is coming out from it.
36. 1:20So that it's ready cooked already to
37. 1:22come out. You take your picker.
38. 1:25Gently.
39. 1:28Out.
40. 1:30You can see
41. 1:31it's out. Then what you do you off this.
42. 1:35You keep this.
43. 1:37You get your soldering iron.
44. 1:41Soldering iron.
45. 1:44You make sure the mount is firm.
46. 1:50Make sure the mount is firm.
47. 1:52Good. You dress the leg.
48. 2:02>> The five legs I showed you the
49. 2:03connection. You dress it.
50. 2:06Clean up.
51. 2:08Now, we keep this back.
52. 2:12Then
53. 2:13your charging port.
54. 2:16It is the previous one. Now, if you want
55. 2:17to put your charging port
56. 2:19you take it.
57. 2:24You use your picker so that you will not
58. 2:27You can be able to put it firm.
59. 2:35Can see that?
60. 2:37The legs are well placed.
61. 2:39You take your blower again.
62. 2:41Now, you are trying to replace it back
63. 2:42after putting a new port.
64. 2:45The new port.
65. 2:48Now, you're going to
66. 2:49do it the same way.
67. 2:57For barely 5 minutes. Barely 5 what?
68. 3:00Not up to 5 minutes, but like 3 minutes.
69. 3:04Notice zoom is very very Notice it's
70. 3:05sitting on it on itself.
71. 3:08It's getting positioned itself.
72. 3:18Make sure that these five legs here
73. 3:201 2 3 4 5 They're accurate.
74. 3:23Do you understand?
75. 3:25Make sure they're accurate and sitting
76. 3:26well.
77. 3:28When you are done when Make sure
78. 3:29everything is sitting down well.
79. 3:31Then you off.
80. 3:33You allow it to cool for 5 minutes.
81. 3:36Allow it to cool for 5 Make sure that
82. 3:37these legs are well
83. 3:39They're well placed.
84. 3:41Cool for 5 minutes.
85. 3:44Okay?
86. 3:45Not up to 5 minutes, but just for a few
87. 3:47minutes because it's not too hot. You
88. 3:48can see.
89. 3:51I've been fixed.
90. 3:53That is how to fix your port.
91. 3:54Okay? Okay? Thank you.