3rd part 2 — Transcript

Full transcript

1. 0:00Okay. Ah okay guys. So for this video um
2. 0:03I will be uh demo I'm going to demo this
3. 0:07building right here. So I uh there were
4. 0:09people who were having a hard time with
5. 0:10this uh building. Okay. So first is
6. 0:15let's try to capture the whole building.
7. 0:20Proceed to matching
8. 0:23wall.
9. 0:25And let's uh first let's fix let's try
10. 0:28to fix the top
11. 0:31layer first. Okay. So capture the ridge
12. 0:48and let's check for other views.
13. 1:03So one more
14. 1:06guys again um
15. 1:09don't just stick with one view okay so
16. 1:12make sure you
17. 1:15adjust
18. 1:19or check other views when capturing um
19. 1:23especially when capturing
20. 1:26the ridge.
21. 1:30Okay. So I think this will do capture uh
22. 1:34the panels.
23. 1:36So again when capturing you can capture
24. 1:38it by in 3D mode.
25. 1:41So I prefer capturing in 3D mode because
26. 1:43I can easily snap to the to the corners.
27. 1:48Next is this part right here. Okay.
28. 2:18So I think this will do
29. 2:24one.
30. 2:27So we can use autofix for this one later
31. 2:30since um again broken panels broken
32. 2:33lines it means that the panel is
33. 2:35inserted or inside of the building. So
34. 2:38we cannot allow or we cannot submit a
35. 2:41building that red panels like so. So
36. 2:44let's check for other views.
37. 2:52Let's try this one.
38. 2:56Okay. So,
39. 2:59and then for this one guys, make sure
40. 3:02you that uh when you put your assist
41. 3:04line, it is connected to this panel
42. 3:07right here. So make sure it highlights
43. 3:09as you can see and
44. 3:13like so.
45. 3:22And let's try to use autofix group and
46. 3:25then press F4.
47. 3:30Okay. So, see
48. 3:34it's very easy guys. As long we as long
49. 3:38connect to this panel right here, it
50. 3:40will automatically also merge. Okay,
51. 3:43with this panel right here. So,
52. 3:46if you click, it will be one panel. So
53. 3:48let's check for other views
54. 3:51and let's capture this back building
55. 3:53right here.
56. 3:57So when capturing let's
57. 4:03flip.
58. 4:05So for this one since we are not sure
59. 4:09okay
60. 4:10if the roof I mean it is too ambigious
61. 4:14to tell if the building or if
62. 4:20the roof the roof material itself is
63. 4:24similar or different with the main
64. 4:26building. So by default we should
65. 4:28capture this as a building. Okay. If it
66. 4:32is ambigious again guys, we need to
67. 4:34capture it as a default building. So
68. 4:40this one.
69. 4:43So I think we are matched. So assist
70. 4:46line right here
71. 4:50up to here. Okay. And then let's capture
72. 4:53it like so.
73. 5:01And this should be okay. So next let's
74. 5:05uh flip the view. And lastly let's
75. 5:08capture this part right here. So
76. 5:17this one and
77. 5:22let's try to use this one.
78. 5:26So top view. Let's avoid top view.
79. 5:35Okay. So, this is much better. So, h
80. 5:41one two double click. So, same with your
81. 5:45multilayered buildings
82. 5:50so I think we captured it properly.
83. 5:53assist line
84. 5:57adjust
85. 6:00so i think
86. 6:03should be good enough capture the panels
87. 6:08for this one we can just capture it like
88. 6:11so and then we can insert the panel's
89. 6:15just use aut for that one later
90. 6:18and try to group f4 4.
91. 6:26Okay. So it should look like this. So
92. 6:28lastly all we need to do is to just add
93. 6:30the corners. Okay. So again guys it
94. 6:33should look like this. Okay not this is
95. 6:36not an Eve. Also this is this is an EV.
96. 6:40Okay. So because we have um like a
97. 6:43structure below this one is open. Same
98. 6:46with this one. This is open. So this is
99. 6:48not an EV. But this one we have a
100. 6:51structure below as you can see right
101. 6:54here. So this can be considered as an
102. 6:56EV.